Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOCATHODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Wide Band Gap CuGa(S,Se) 2 Thin Films on Transparent Conductive Fluorinated Tin Oxide Substrates as Photocathode Candidates for Tandem Water Splitting Devices

Theaim of this report was to explore the potential of CuGa(S,Se)2 thin films as wide-E G top cell absorbers for photoelectrochemical (PEC) water splitting. A synthesis was developed on fluorinated tin oxide (FTO) photocathodes by converting copper-rich co-evaporated CuGaSe2 into CuGa(S,Se)2 via a post-deposition annealing. We found it necessary to first anneal CuGaSe2 at low-temperature in sulfur then at high-temperature in nitrogen to preserve the transparency and conductivity of the FTO. Using this two-step synthesis, we fabricated a 1.72eV CuGa(S,Se) 2 photocathode with a saturation current density and photocurrent onset potential of 10mA/cm 2 and -0.20V vs. RHE, respectively. Yet we found that the PEC performance and sub-E G transmittance, worsened with increasing copper content. Using flatband potential measurements and the Gerischer model, we show that divergences in PEC performance of CuGa(S,Se) 2 photocathodes can be explained by differences in conduction band minimums and Fermi levels. We also explain that sub-E G transmittance is likely hampered by a defect band 100-400 meV below E C . Additional external quantum efficiency measurements of a high-efficiency 1.1 eV Cu(In,Ga)Se 2 photovoltaic driver, while shaded by the CuGa(S,Se) 2 photocathode, yielded a short-circuit current density of 4.14 mA/cm 2 revealing that CuGa(S,Se) 2 reflects promise as a top cell for PEC water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoelectrochemical Nitrogen Reduction to Ammonia on Cupric and Cuprous Oxide Photocathodes

Photoelectrochemical N 2 reduction enables the production of NH 3 under ambient conditions using water as the hydrogen source. Furthermore, by utilizing solar energy, photoelectrochemical N 2 reduction can significantly reduce the energy input required for N 2 reduction. In this study, photoelectrochemical N 2 production was investigated using CuO and Cu 2 O photocathodes that are known to be poorly catalytic for water reduction, the major reaction competing with N 2 reduction. When tested under simulated solar illumination with isotopically labeled 15 N 2 in 0.1 M KOH solution, the CuO and Cu 2 O photocathodes produced 15 NH 3 with a Faradaic efficiency of 17% and 20% at 0.6 V and 0.4 V vs. RHE, respectively. These potentials are significantly more positive than the thermodynamic reduction potential of N 2 , which demonstrates how the use of photoexcited electrons in the CuO and Cu 2 O photocathodes can reduce the energy input required for NH 3 production. Here, the use of photoexcited electrons in these photocathodes for N 2 reduction, water reduction, and photocorrosion was carefully examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum efficiencies of imaging detectors with alkali halide photocathodes. I - Microchannel plates with separate and integral CsI photocathodes

Measurements and comparisons have been made of the quantum efficiencies of microchannel plate (MCP) detectors in the far-UV (below 2000-A) wavelength range using CsI photocathodes (a) deposited on the front surfaces of microchannel plates and (b) deposited on solid substrates as opaque photocathodes with the resulting photoelectrons input to microchannel plates. The efficiences were measured in both pulse-counting and photodiode modes of operation. Typical efficiencies are about 15 percent at 1216 A for a CsI-coated MCP compared with 65 percent for an opaque CsI photocathode MCP detector. Special processing has yielded an efficiency as high as 20 percent for a CsI-coated MCP. This may possibly be further improved by optimization of the tilt angle of the MCP channels relative to the front face of the MCP and incident radiation. However, at present there still remains a factor of at least 3 quantum efficiency advantage in the separate opaque CsI photocathode configuration.

Carruthers, George R.↗

Design and fabrication of prototype 6×6 cm 2 microchannel plate photodetector with bialkali photocathode for fast timing applications

Planar microchannel plate-based photodetector with bialkali photocathode is capable of fast and accurate time and position resolutions. A new 6 cm x 6 cm photodetector production facility was designed and built at Argonne National Laboratory. Small form-factor MCP-based photodetectors completely constructed of glass were designed and prototypes were successfully fabricated. Knudsen effusion cells were incorporated in the photocathode growth chamber to achieve uniform and high quantum efficiency hotocathodes. The thin film uniformity distribution was simulated and measured for an antimony film deposition, showing uniformity of better than 10%. Several prototype devices with bialkali photocathodes have been fabricated with the described system and their characteristics were evaluated in the large signal (multi-PE) limit. A typical prototype device exhibits time-of-flight resolution of ~ 27 psec and differential time resolution of ~ 9 psec, corresponding to spatial resolution of ~ 0.65 mm.

bialkali photocathode↗

A novel system for measurement of the transverse electron momentum distribution from photocathodes

The transverse momentum of electrons produced by a photocathode contributes significantly to the performance of several different types of accelerator-based light sources, such as Free Electron Lasers, as well as systems designed for ultrafast electron diffraction and dynamic transmission electron microscopy. Minimization of the transverse emittance from photocathodes is the subject of intensive research, and therefore measurement of this parameter is of great importance. Here, we describe a simple system that offers real time measurements of transverse emittance and can be easily integrated into the photocathode fabrication process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Controlling Catalyst–Semiconductor Contacts: Interfacial Charge Separation in p-InP Photocathodes

Charge-carrier-selective interfaces between electrocatalyst particles and semiconductor light absorbers are critical for solar photochemistry but controlling their properties is challenging. Using thin films and nanoparticle arrays of Pt hydrogen-evolution catalysts on p-InP (a high-performance photocathode material), along with macroscopic and nanoscopic electrical and chemical analysis, we show how hydrogen alloying, the pinch-off effect for nanoscale contacts, and the formation of a native surface oxides all play different roles in creating charge-carrier-selective junctions. As a result, the new insights can be broadly applied to photocathodes, photoanodes, and overall water-splitting systems to control charge-carrier selectivity and improve performance.

14 SOLAR ENERGY↗

Enhanced quantum efficiency from hybrid cesium halide/copper photocathodes

The quantum efficiency (QE) of Cu is found to increase dramatically when coated by a CsI film and then irradiated by a UV laser. Over three orders of magnitude quantum efficiency enhancement at 266 nm is observed in CsI/Cu(100), indicating potential application in future photocathode devices. Upon laser irradiation, a large work function reduction to a value less than 2 eV is also observed, significantly greater than for similarly treated CsBr/Cu(100). The initial QE enhancement, prior to laser irradiation, is attributed to interface interaction and the intrinsic properties of the Cs halide film. Further QE enhancement following activation is attributed to formation of inter-band states and Cs metal accumulation at the interface induced by laser irradiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Emission properties of body-centered cubic elemental metal photocathodes

A first principles analysis of photoemission is developed to explain the lower than expected rms transverse electron momentum measured using the solenoid scan technique for the body-centered cubic Group Vb (V, Nb, and Ta) and Group VIb (Cr, Mo, and W) metallic photocathodes. The density functional theory based analysis elucidates the fundamental role that the electronic band structure (and its dispersion) plays in determining the emission properties of solid-state photocathodes and includes evaluation of work function anisotropy using a thin-slab method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the tradeoff between intrinsic emittance and quantum efficiency from a NaKSb photocathode near threshold

We measure the tradeoff between the quantum efficiency and intrinsic emittance from a NaKSb photocathode at three increasing wavelengths (635, 650, and 690 nm) at or below the energy of the bandgap plus the electron affinity, hν≤E{sub g}+E{sub a}. These measurements were performed using a high voltage dc gun for varied photocathode surface fields of 1.4−4.4 MV/m. Measurements of intrinsic emittance are performed using two different methods and were found to agree. At the longest wavelength available, 690 nm, the intrinsic emittance was 0.26 μm/mm-rms with a quantum efficiency of ∼10{sup −4}. The suitability of NaKSb emitting at threshold for various low emittance applications is discussed.

36 MATERIALS SCIENCE↗

Combined Theoretical and Experimental Investigations of Atomic Doping To Enhance Photon Absorption and Carrier Transport of LaFeO 3 Photocathodes

Perovskite-type lanthanum iron oxide, LaFeO 3 , is a p-type semiconductor that can achieve overall water splitting using visible light while maintaining photostability. These features make LaFeO 3 a promising photocathode candidate for various photoelectrochemical cells. Currently, the photoelectrochemical performance of a LaFeO 3 photocathode is mainly limited by considerable bulk electron-hole recombination. This study reports a combined theoretical and experimental investigation on atomic doping of LaFeO 3 , in particular, substitutional doping of La 3+ with K + , to increase its charge transport properties and decrease electron-hole recombination. The computational results show that K doping enhances not only the charge transport properties but also photon absorption below the bandgap energy of the pristine LaFeO 3 . The effect of K doping was systematically investigated by comparing the electronic and atomic structures, majority carrier density, hole-polaron formation, and optical properties of pristine and K-doped LaFeO 3 . The computational results were then verified by experimentally characterizing the crystal structures, compositions, optical properties, and photoelectrochemical properties of LaFeO 3 and K-doped LaFeO 3 electrodes. For this purpose, pristine LaFeO 3 and K-doped LaFeO 3 were prepared as high-surface-area, high-purity photoelectrodes having the same morphology to accurately and unambiguously evaluate the effect of K doping. Here, the combined computational and experimental investigations presented in this study provide useful insights into the effect of composition tuning of LaFeO 3 and other p-type oxides with a perovskite structure.

14 SOLAR ENERGY↗

Modulating Hole Transport in Multilayered Photocathodes with Derivatized p-Type Nickel Oxide and Molecular Assemblies for Solar-Driven Water Splitting

We report here a new photocathode composed of a bi-layered doped NiO film topped by a macro-mesoporous ITO (ioITO) layer with molecular assemblies attached to the ioITO surface. The NiO film containing a 2% K+ doped NiO inner layer and a 2% Cu2+ doped NiO outer layer provides sufficient driving force for hole transport after injection to NiO by the molecular assembly. The tri-layered oxide, NiK0.02O | NiCu0.02O | ioITO, sensitized by a ruthenium polypyridyl dye and functionalized with a nickel-based hydrogen evolution catalyst, outperforms its counterpart, NiO | NiO | ioITO, in photocatalytic hydrogen evolution from water over a period of several hours with a Faradaic yield of ~90%.

Shan, Bing↗

Stable Unassisted Solar Water Splitting on Semiconductor Photocathodes Protected by Multifunctional GaN Nanostructures

Producing hydrogen by unassisted solar water splitting is one essential step to make direct solar fuel conversion a viable energy source. To date, however, there has been no demonstration of stable photoelectrodes for high efficiency photoelectrochemical water splitting. In this work, we report that a GaInP2/GaAs/Ge triple-junction (3J) photocathode protected by multi-functional GaN nanostructures can enable both efficient and relatively stable solar water splitting. A 12.6% solar-to-hydrogen (STH) efficiency is measured without any external bias. Of particular importance, we demonstrate relatively stable solar water splitting for 80 hours in three-electrode configuration and 57 hours in two-electrode measurement at zero bias. This is the best reported stability for multi-junction semiconductor photocathodes in two-electrode configuration to our knowledge. Here, the multifunctional GaN nanostructure significantly reduces the charge transfer resistance at semiconductor/electrolyte interface and protects III-V materials against corrosion. Such multi-functional GaN photocatalytic nanostructures provide a new pathway to improve the performance of conventional photoelectrodes to achieve both efficient and stable unassisted solar water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reproducible, rugged, and inexpensive photocathode x-ray diode

The photoemissive cathode type of x-ray diode (XRD) is popular for measuring time and spectrally resolved output of pulsed power experiments. Vitreous carbon XRDs currently used on the Sandia National Laboratories Z-machine were designed in the early 1980s and use materials and processes no longer available. Additionally cathodes used in the high x-ray flux and dirty vacuum environment of a machine such as Z suffer from response changes requiring recalibration. In searching for a suitable replacement cathode, we discovered very high purity vitreous-carbon planchets are commercially available for use as biological substrates in scanning electron microscope (SEM) work. After simplifying the photocathode mounting to use commercially available components, we constructed a set of 20 XRDs using SEM planchets that were then calibrated at the National Synchrotron Light Source at Brookhaven National Laboratory. We present comparisons of the reproducibility and absolute calibrations between the current vitreous-carbon XRDs and our new design.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗