Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHORUS 45”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

35 records · Page 2

Materials Data on Mg2PHO5 by Materials Project

Mg2(PO4)OH crystallizes in the monoclinic Cm space group. The structure is three-dimensional and consists of two phosphorus oxide (po) molecules and one Mg12P5H3O29 framework. In the Mg12P5H3O29 framework, there are six inequivalent Mg2+ sites. In the first Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with four MgO6 octahedra, corners with four PO4 tetrahedra, edges with two equivalent MgO6 octahedra, and a faceface with one MgO6 octahedra. The corner-sharing octahedra tilt angles range from 45–71°. There are a spread of Mg–O bond distances ranging from 2.04–2.29 Å. In the second Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with four MgO6 octahedra, corners with four PO4 tetrahedra, edges with two equivalent MgO6 octahedra, and a faceface with one MgO6 octahedra. The corner-sharing octahedra tilt angles range from 45–71°. There are a spread of Mg–O bond distances ranging from 2.04–2.29 Å. In the third Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with four MgO6 octahedra, corners with four PO4 tetrahedra, edges with two equivalent MgO6 octahedra, and a faceface with one MgO6 octahedra. The corner-sharing octahedra tilt angles range from 45–71°. There are a spread of Mg–O bond distances ranging from 2.04–2.29 Å. In the fourth Mg2+ site, Mg2+ is bonded to six O2- atoms to form distorted MgO6 octahedra that share corners with three MgO6 octahedra, corners with three PO4 tetrahedra, edges with two equivalent MgO6 octahedra, and a faceface with one MgO6 octahedra. The corner-sharing octahedra tilt angles range from 45–61°. There are a spread of Mg–O bond distances ranging from 2.03–2.40 Å. In the fifth Mg2+ site, Mg2+ is bonded to six O2- atoms to form distorted MgO6 octahedra that share corners with three MgO6 octahedra, corners with three PO4 tetrahedra, edges with two equivalent MgO6 octahedra, and a faceface with one MgO6 octahedra. The corner-sharing octahedra tilt angles range from 45–61°. There are a spread of Mg–O bond distances ranging from 2.03–2.40 Å. In the sixth Mg2+ site, Mg2+ is bonded to six O2- atoms to form distorted MgO6 octahedra that share corners with three MgO6 octahedra, corners with three PO4 tetrahedra, edges with two equivalent MgO6 octahedra, and a faceface with one MgO6 octahedra. The corner-sharing octahedra tilt angles range from 45–61°. There are a spread of Mg–O bond distances ranging from 2.03–2.40 Å. There are three inequivalent P5+ sites. In the first P5+ site, P5+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with nine MgO6 octahedra. The corner-sharing octahedra tilt angles range from 40–70°. There is three shorter (1.55 Å) and one longer (1.57 Å) P–O bond length. In the second P5+ site, P5+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with eight MgO6 octahedra. The corner-sharing octahedra tilt angles range from 45–61°. There is two shorter (1.55 Å) and two longer (1.56 Å) P–O bond length. In the third P5+ site, P5+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with eight MgO6 octahedra. The corner-sharing octahedra tilt angles range from 45–61°. There are a spread of P–O bond distances ranging from 1.54–1.56 Å. There are two inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the second H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. There are sixteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a 3-coordinate geometry to two equivalent Mg2+ and one O2- atom. The O–O bond length is 1.55 Å. In the second O2- site, O2- is bonded in a 3-coordinate geometry to two Mg2+ and one O2- atom. The O–O bond length is 1.55 Å. In the third O2- site, O2- is bonded in a distorted trigonal planar geometry to two Mg2+ and one P5+ atom. In the fourth O2- site, O2- is bonded in a distorted trigonal planar geometry to two Mg2+ and one P5+ atom. In the fifth O2- site, O2- is bonded in a distorted trigonal planar geometry to two Mg2+ and one P5+ atom. In the sixth O2- site, O2- is bonded in a trigonal planar geometry to two equivalent Mg2+ and one P5+ atom. In the seventh O2- site, O2- is bonded in a trigonal planar geometry to two Mg2+ and one P5+ atom. In the eighth O2- site, O2- is bonded in a 3-coordinate geometry to two Mg2+ and one P5+ atom. In the ninth O2- site, O2- is bonded in a 3-coordinate geometry to two Mg2+ and one P5+ atom. In the tenth O2- site, O2- is bonded in a 3-coordinate geometry to two equivalent Mg2+ and one P5+ atom. In the eleventh O2- site, O2- is bonded in a 3-coordinate geometry to two Mg2+ and one P5+ atom. In the twelfth O2- site, O2- is bonded in a tetrahedral geometry to three Mg2+ and one P5+ atom. In the thirteenth O2- site, O2- is bonded in a 5-coordinate geometry to four Mg2+ and one O2- atom. In the fourteenth O2- site, O2- is bonded in a 5-coordinate geometry to four Mg2+ and one O2- atom. In the fifteenth O2- site, O2- is bonded in a distorted single-bond geometry to four Mg2+ and one H1+ atom. In the sixteenth O2- site, O2- is bonded in a distorted single-bond geometry to four Mg2+ and one H1+ atom.

36 MATERIALS SCIENCE↗

Inorganic characterization of switchgrass biomass using laser-induced breakdown spectroscopy

The inorganic characterization of 74 samples of switchgrass using laser-induced breakdown spectroscopy (LIBS) was undertaken. Determination of ash and inorganic elements content in biomass materials is vital for feedstock screening for bioconversion processes. Hierarchical models using principal component analysis (PCA) and partial least square analysis (PLS) were used to determine the presence of specific elemental micronutrients that are important in determining plant health for robust biomass production. LIBS uses a 532 nm laser with 45 mJ of laser power to excite the samples of switchgrass plant material and the emission of all the elements present in the plant samples were recorded in single spectra with a wide wavelength range of 200–800 nm. The results were compared to the laboratory standard technique, e.g., ICP-OES technique, to determine the true values for major micronutrients such as, silicon (Si), potassium (K), calcium (Ca), magnesium (Mg), phosphorus (P), and sulfur (S). Overall, our objectives were: 1) To determine the spectral features of switchgrass containing different amounts of these elements and 2) To examine the viability of this technique for determining the quality of the feedstock in terms of its inorganic composition. Cross-validation results showed that the broad-based model developed is promising for inorganics prediction in switchgrass. The LIBS validation prediction for the micronutrient elements mentioned here have been obtained. The regression coefficients for Si, were obtained to be 0.995, 0.994 for calibration and validation respectively, in case of Ca the regression coefficients were, 0.994 and 0.992 for calibration and validation. Similarly, in the case of Mg and K these were calculated to be 0.992 and 0.985, and 0.994 and 0.993 respectively. The regression coefficients are not as good as those for the elements mentioned, in case of the two elements S and P. They are 0.957, and 0.878, and 0.952 and 0.894 respectively for calibration, validation for the two elements. This demonstrates that LIBS-based techniques are inherently well suited for diverse environmental applications. Furthermore, LIBS along with PLS model can show capability in determining the viability of switchgrass as a biomass in the production of biofuels and survivability of switchgrass in processes associated with climate change. LIBS can help determining which switchgrass would be appropriate for a specific conversion process that favors low ash content overall or low value of specific inorganics.

59 BASIC BIOLOGICAL SCIENCES↗

Solar System Science With the Single Aperture Large Telescope for Universe Studies Space Observatory

Single Aperture Large Telescope for Universe Studies (SALTUS) is a NASA Astrophysics Probe Explorer (APEX)-class mission concept employing a robust far-infrared pointed space observatory. SALTUS comprises a 14-m inflatable reflector that provides 16× the sensitivity and 4× the angular resolution of Herschel, with a sunshield that radiatively cools the primary to 45 K, along with cryogenic detectors that collectively span the 34 to 660 μm far-infrared spectral range at high and moderate spectral resolutions. The high sensitivity and high spectral resolving power of the SALTUS heterodyne receivers enable both submillimeter and far-infrared observations of trace compounds comprising water and its isotopologues, hydrogen deuteride (HD), and a plethora of molecular species containing carbon, hydrogen, nitrogen, oxygen, phosphorus, or sulfur (CHNOPS), all of which are obscured by the Earth’s atmosphere. The high sensitivity and broadband spectral coverage of the SALTUS far-infrared grating spectrometer enables far-infrared observations of the lattice vibrational spectral signatures of ices and mineral grains contained within a wide variety of solar system targets, including comets, planetary atmospheres, near Enceladus’ plumes, and on the surfaces of icy moons, Jupiter trojans, centaurs, and Kuiper Belt objects. A key objective of SALTUS is to measure HDO∕H 2 O in both Jupiter family and Oort cloud comets. Additional observations will allow us to characterize the water torus around Saturn generated by its icy moon Enceladus, determine the source of stratospheric water in the giant planets, ascertain the time evolution of water on Venus, and search for H 2 O plumes on Europa, Ganymede, and Callisto. SALTUS will measure HD∕H 2 in all four giant planets to constrain models of their origin. SALTUS can also measure the abundance of CHNOPS-containing molecules and halides in the atmosphere of Venus and in the comae of comets. We review the extensive amount of solar system science achievable with SALTUS for both the Guaranteed Time Observation and the Guest Observer APEX mission observing programs.

Carrie M. Anderson↗

SOLID PHASE CHARACTERIZATION OF HEEL SAMPLES FROM TANK 241-C-110

During sluicing operations of tank 241-C-110, a significant amount of solids were unable to be retrieved. These solids (often referred to as the tank 'heel') were sampled in 2010 and chemically and mineralogically analyzed in the 222-S Laboratory. Additionally, dissolution tests were performed to identify the amount of undissolvable material after using multiple water contacts. This report covers the solid phase characterization of six samples from these tests using scanning electron microscopy, polarized light microscopy, and X-ray diffraction. The chemical analyses, particle size distribution analysis, and dissolution test results are reported separately. Two of the samples were from composites created from as-received material - Composite A and Composite B. The main phase in these samples was sodium-fluoride-phosphate hydrate (natrophosphate) - in the X-ray diffraction spectra, this phase was the only phase identifiable. Polarized light microscopy showed the presence of minor amounts of gibbsite and other phases. These phases were identified by scanning electron microscopy - energy dispersive X-ray spectroscopy as sodium aluminosilicates, sodium diuranate, and sodium strontium phosphate hydrate (nastrophite) crystals. The natrophosphate crystals in the scanning electron microscopy analysis showed a variety of erosive and dissolution features from perfectly shaped octahedral to well-rounded appearance. Two samples were from water-washed Composites A and B, with no change in mineralogy compared to the as-received samples. This is not surprising, since the water wash had only a short period of water contact with the material as opposed to the water dissolution tests. The last two samples were residual solids from the water dissolution tests. These tests included multiple additions of water at 15 C and 45 C. The samples were sieved to separate a coarser fraction of > 710 {mu}m and a finer fraction of < 710 {mu}m. These two fractions were analyzed separately. The coarser fraction contained mostly gibbsite with minor amounts of sodium aluminosilicates (cancrinite) and bismuth aluminum-rich phases. The finer fraction was mostly composed of gibbsite, the sodium alumino silicate phase, cancrinite, and a poorly crystalline to non-crystalline phase containing varying amounts of iron, bismuth, aluminum, and phosphorus.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Quantifying the effect of fracture surface topography on the scattering of grain boundary segregation measurement by Auger electron spectroscopy

The aim of this paper is to estimate the effect of the geometrical orientation of grain boundary facets on the quantification of grain boundary segregation by Auger electron spectroscopy (AES) on an in-situ fractured surface. Phosphorus grain boundary segregation (PGBS) was studied on 17 different samples (including 3 different steels and 12 different thermal treatments) using a MAC2 analyzer from Riber company. For each sample, 14 to 41 grain boundary facets were analyzed. It is demonstrated that there is proportionality between the PGBS mean value and the PGBS standard deviation obtained on one particular sample: for each sample, the PGBS standard deviation represents approximately 40% of the PGBS mean value. The topography of a typical purely intergranular fracture surface was determined by 3D stereographic observation in a SEM. The influence of surface topography on Auger quantification was then evaluated using the Auger quantification equations. The orientation of grain boundary facets with respect to the primary beam and the Auger analyzer was taken into account. The result is that, considering a homogeneous PGBS on all the grain boundary facets, a large scattering ({approx} 45%) of the PGBS quantification by AES can be accounted for by a purely geometrical effect (orientation of each facet with respect to the primary beam and to the Auger analyzer). This geometrical effect is nevertheless strongly dependant on the spectrometer geometry (respective position of primary beam, sample and Auger analyzer with respect to each other) and could be reduced by optimizing the relative positions of primary beam, sample and Auger analyzer. The topographical analysis was extended to the case of the well-known CMA (Cylindrical Mirror Analyzer). The scattering of the PGBS measurements with Auger spectrometers fitted with a CMA perpendicular to the fracture surface is expected to be much smaller.

36 MATERIALS SCIENCE↗

Speciation of Soil Phosphorus Assessed by XANES Spectroscopy at Different Spatial Scales

Precise management of soil phosphorus (P) to meet competing demands of agriculture and environmental protection can benefit from more comprehensive characterization of P speciation in soils. Our objectives were to provide spatial context for spectroscopic analyses of soil P speciation in relation to molecular-scale species and landscape-scale management of P, and to compare soil P-species diversity from spectroscopic measurements at submicron and millimeter scales. The spatial range of ~26 orders of magnitude between atomic and field scales presents a challenge to upscaling and downscaling information from spectroscopic analyses of soils. Scanning fluorescence X-ray microscopy images of a 50-mm ´ 45-mm area of an organic soil sample showed heterogeneous distributions of P, Al, and Si. Microscale X-ray absorption near edge structure (μ-XANES) spectra collected at the P K-edge from 12 spots on the soil sample exhibited diverse features that indicated variations in highly localized P speciation. Linear combination fitting analysis of the μ-XANES spectra included various proportions of three standards that appeared in fits for most spots and five standards that appeared in fits for one spot each. The fit to a bulk-soil spectrum was dominated by two of the common standards in the μ-XANES fits, and a fit to the sum of m-XANES spectra included four of the standards. Lastly, these results illustrate a gain in P species sensitivity from spatially resolved XANES analysis. Integrating spectroscopic analyses from multiple scales determines soil P species diversity and will ultimately help connect speciation to the chemical reactivity and mobility of P in soils.

36 MATERIALS SCIENCE↗

Luminescent Properties of Borosilicate Glass Doped with Cerium

ABS–BGP glasses (Al{sub 2}O{sub 3}–B{sub 2}O{sub 3}–SiO{sub 2}–BaCO{sub 3}–Gd{sub 2}O{sub 3}–P{sub 2}O{sub 5}) doped with different concentrations of Ce{sup 3+} ions are synthesized by the high-temperature melting technique. Optical, structural, and luminescence properties were studied. Emission connected with the transitions of Ce{sup 3+} ions is recorded in a spectral region of 350–550 nm. The luminescence decay kinetics is characterized by two components: fast and slow. The fast decay component is 45–90 ns; decreasing decay time of the slow component from 4 to 0.9 μs is observed with increasing cerium ion concentration. Based on the obtained results, it is assumed that Ce{sup 3+} ions exist in different emission states in the borosilicate glass.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High rate mesophilic, thermophilic, and temperature phased anaerobic digestion of waste activated sludge: A pilot scale study

Highlights: Black-Right-Pointing-Pointer High temperatures were tested in single and two-stage anaerobic digestion of waste activated sludge. Black-Right-Pointing-Pointer The increased temperature demonstrated the possibility of improving typical yields of the conventional mesophilic process. Black-Right-Pointing-Pointer The temperature phased anaerobic digestion process (65 + 55 Degree-Sign C) showed the best performances with yields of 0.49 m{sup 3}/kgVS{sub fed}. Black-Right-Pointing-Pointer Ammonia and phosphate released from solids destruction determined the precipitation of struvite in the reactor. - Abstract: The paper reports the findings of a two-year pilot scale experimental trial for the mesophilic (35 Degree-Sign C), thermophilic (55 Degree-Sign C) and temperature phased (65 + 55 Degree-Sign C) anaerobic digestion of waste activated sludge. During the mesophilic and thermophilic runs, the reactor operated at an organic loading rate of 2.2 kgVS/m{sup 3}d and a hydraulic retention time of 20 days. In the temperature phased run, the first reactor operated at an organic loading rate of 15 kgVS/m{sup 3}d and a hydraulic retention time of 2 days while the second reactor operated at an organic loading rate of 2.2 kgVS/m{sup 3}d and a hydraulic retention time of 18 days (20 days for the whole temperature phased system). The performance of the reactor improved with increases in temperature. The COD removal increased from 35% in mesophilic conditions, to 45% in thermophilic conditions, and 55% in the two stage temperature phased system. As a consequence, the specific biogas production increased from 0.33 to 0.45 and to 0.49 m{sup 3}/kgVS{sub fed} at 35, 55, and 65 + 55 Degree-Sign C, respectively. The extreme thermophilic reactor working at 65 Degree-Sign C showed a high hydrolytic capability and a specific yield of 0.33 gCOD (soluble) per gVS{sub fed}. The effluent of the extreme thermophilic reactor showed an average concentration of soluble COD and volatile fatty acids of 20 and 9 g/l, respectively. Acetic and propionic acids were the main compounds found in the acids mixture. Because of the improved digestion efficiency, organic nitrogen and phosphorus were solubilised in the bulk. Their concentration, however, did not increase as expected because of the formation of salts of hydroxyapatite and struvite inside the reactor.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Impact of post-mining subsidence on nitrogen transformation in southern tropical dry deciduous forest, India

The goal of our research was to assess the impact of post-mining land subsidence, caused due to underground coal mining operations, on fine root biomass and root tips count; plant available nutrient status, microbial biomass N (MBN) and N-mineralization rates of a Southern tropical dry deciduous forest of Singareni Coalfields of India. The changes were quantified in all the three (rainy, winter and summer) seasons, in slope and depression microsites of the subsided land and an adjacent undamaged forest microsite. Physico-chemical characteristics were found to be altered after subsidence, showing a positive impact of subsidence on soil moisture, bulk density, water holding capacity, organic carbon content, total N and total P. The increase in all the parameters was found in depression microsites, while in slope microsites, the values were lower. Fine root biomass and root tips count increased in the subsided depression microsites, as demonstrated by increases of 62% and 45%, respectively. Soil nitrate-N and phosphate-P concentrations were also found to be higher in depression microsite, showing an increase of 35.68% and 24.74%, respectively. Depression microsite has also shown the higher MBN value with an increase over control. Net nitrification, net N-mineralization and MBN were increased in depression microsite by 29.77%, 25.72% and 34%, respectively. There was a positive relation of microbial N with organic C, fine root biomass and root tips.

01 COAL, LIGNITE, AND PEAT↗

The Petrology and Geochemistry of Feldspathic Granulitic Breccia NWA 3163: Implications for the Lunar Crust

Lunar meteorites are crucial to understand the Moon s geological history because, being samples of the lunar crust that have been ejected by random impact events, they potentially originate from areas outside the small regions of the lunar surface sampled by the Apollo and Luna missions. The Apollo and Luna sample sites are contained within the Procellarum KREEP Terrain (PKT, Jolliff et al., 2000), where KREEP refers to potassium, rare earth element, and phosphorus-rich lithologies. The KREEP-rich rocks in the PKT are thought to be derived from late-stage residual liquids after approx.95-99% crystallization of a lunar magma ocean (LMO). These are understood to represent late-stage liquids which were enriched in incompatible trace elements (ITE) relative to older rocks (Snyder et al., 1992). As a consequence, the PKT is a significant reservoir for Th and KREEP. However, the majority of the lunar surface is likely to be significantly more depleted in ITE (84%, Jolliff et al., 2000). Lunar meteorites that are low in KREEP and Th may thus sample regions distinct from the PKT and are therefore a valuable source of information regarding the composition of KREEP-poor lunar crust. Northwest Africa (NWA) 3163 is a thermally metamorphosed ferroan, feldspathic, granulitic breccia composed of igneous clasts with a bulk anorthositic, noritic bulk composition. It is relatively mafic (approx.5.8 wt.% FeO; approx.5 wt.% MgO) and has some of the lowest concentrations of ITEs (17ppm Ba) compared to the feldspathic lunar meteorite (FLM) and Apollo sample suites (Hudgins et al., 2011). Localized plagioclase melting and incipient melting of mafic minerals require localized peak shock pressures in excess of 45 GPa (Chen and El Goresy, 2000; Hiesinger and Head, 2006). NWA 3163, and paired samples NWA 4481 and 4883, have previously been interpreted to represent an annealed micro-breccia which was produced by burial metamorphism at depth in the ancient lunar crust (Fernandes et al., 2009). This is in contrast to the interpretation of Hudgins et al. (2009) where NWA 3163 was interpreted to have formed through contact metamorphism. To further constrain its origin, we examine the petrogenesis of NWA 3163 with a particular emphasis on in-situ measurement of trace elements within constituent minerals, Sm-Nd and Rb-Sr isotopic systematics on separated mineral fractions and petrogenetic modeling.

McLeod, C. L.↗

Optima XE Single Wafer High Energy Ion Implanter

The Optima XE is the first production worthy single wafer high energy implanter. The new system combines a state-of-art single wafer endstation capable of throughputs in excess of 400 wafers/hour with a production-proven RF linear accelerator technology. Axcelis has been evolving and refining RF Linac technology since the introduction of the NV1000 in 1986. The Optima XE provides production worthy beam currents up to energies of 1.2 MeV for P{sup +}, 2.9 MeV for P{sup ++}, and 1.5 MeV for B{sup +}. Energies as low as 10 keV and tilt angles as high as 45 degrees are also available., allowing the implanter to be used for a wide variety of traditional medium current implants to ensure high equipment utilization. The single wafer endstation provides precise implant angle control across wafer and wafer to wafer. In addition, Optima XE's unique dose control system allows compensation of photoresist outgassing effects without relying on traditional pressure-based methods. We describe the specific features, angle control and dosimetry of the Optima XE and their applications in addressing the ever-tightening demands for more precise process controls and higher productivity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

In-vitro study of copper doped SiO{sub 2}-CaO-P{sub 2}O{sub 5} system for bioactivity and antimicrobial properties

Samples of the xCuO-(45-x)CaO-10P{sub 2}O{sub 5}-45SiO{sub 2} system (x varies from 0 to 4 mole%) have been synthesized for application as biomaterials to slow or inhibit the growth of living organisms (fungi and other pathogenic microorganisms) by the combination of sol-gel and co-precipitation processes. Prepared samples have been characterized by X-Ray Diffraction, Fourier Transform Infra-Red and Field Emission Scanning Electron Microscopy techniques before and after immersion in simulated body fluid. Antimicrobial activity of samples has been investigated against Staphylococcus aureus. Releasing of Cu{sup 2+}and other ions in the simulated body fluid has been determined by Atomic Absorption Spectroscopy to ensure the use of prepared material as biomaterial with good antibacterial properties.

36 MATERIALS SCIENCE↗

Supplemental Defatted Microalgae Nannochloropsis oceanica Affected Apparent Retention and Ileal Digestibility of Nutrients in a Corn-Soybean Meal Based Diet for Broiler Chickens

Objective: This study was to assess impacts of including 10% defatted microalgae (Nannochloropsis oceanica, 45% crude protein and 3.8% ether extract) into a corn-soybean meal basal diet for broiler chickens on apparent retention and ileal digestibility of nutrients. Procedures: Day-old hatchling Cornish Giant cockerels were divided into two groups (6 cages/group, 6 chicks/cage) and fed either the basal (control) or the microalgae-supplemented (microalgae) diet for 6 weeks. Starting week 3, the two experimental diets were mixed with 0.2% chromium oxide as an indigestible marker. Total excreta of individual cages were collected daily for 3 consecutive days during week 6. At the end of week 6, chicks were euthanized to collect ileal digesta from 1 chick/cage. Energy and concentrations of dry matter, crude protein, ether extract, minerals, and amino acids in digesta, excreta, and diets were assayed. Apparent retentions and ileal digestibilities were calculated using the direct collection and indirect indicator methods. Data were analyzed by the Student’s t-test and the significant level of difference was at p < 0.05. Results: The microalgae diet had elevated (4.2% and 8.1% by the two methods, p < 0.05) apparent retention of ether extract, but similar apparent retention and ileal digestibility of dry matter and apparent metabolizable energy, compared with the control diet. Supplemental defatted microalgae decreased (p < 0.05) the apparent retention and ileal digestibility of dietary crude protein by 13% and 13%. The supplementation also decreased (p < 0.05) ileal digestibilities and apparent retentions of multiple amino acids ranging from 0.6% to 26%. Apparent retentions of sodium and total phosphorus were decreased (p < 0.05) by 13% and 71%, respectively, by the microalgae inclusion compared with the control. Conclusion: The inclusion of 10% defatted N. oceanica in the corn-soybean meal basal diet for broiler chickens led moderate increases in apparent retention and ileal digestibility of ether extract, but decreased those of crude protein, amino acids, sodium, and phosphorus.

60 APPLIED LIFE SCIENCES↗

Cholinesterase inhibition and acetylcholine accumulation following intracerebral administration of paraoxon in rats

We evaluated the inhibition of striatal cholinesterase activity following intracerebral administration of paraoxon assaying activity either in tissue homogenates ex vivo or by substrate hydrolysis in situ. Artificial cerebrospinal fluid (aCSF) or paraoxon in aCSF was infused unilaterally (0.5 {mu}l/min for 2 h) and ipsilateral and contralateral striata were harvested for ChE assay ex vivo. High paraoxon concentrations were needed to inhibit ipsilateral striatal cholinesterase activity (no inhibition at < 0.1 mM; 27% at 0.1 mM; 79% at 1 mM paraoxon). With 3 mM paraoxon infusion, substantial ChE inhibition was also noted in contralateral striatum. ChE histochemistry generally confirmed these concentration- and side-dependent effects. Microdialysates collected for up to 4 h after paraoxon infusion inhibited ChE activity when added to striatal homogenate, suggesting prolonged efflux of paraoxon. Since paraoxon efflux could complicate acetylcholine analysis, we evaluated the effects of paraoxon (0, 0.03, 0.1, 1, 10 or 100 {mu}M, 1.5 {mu}l/min for 45 min) administered by reverse dialysis through a microdialysis probe. ChE activity was then monitored in situ by perfusing the colorimetric substrate acetylthiocholine through the same probe and measuring product (thiocholine) in dialysates. Concentration-dependent inhibition was noted but reached a plateau of about 70% at 1 {mu}M and higher concentrations. Striatal acetylcholine was below the detection limit at all times with 0.1 {mu}M paraoxon but was transiently elevated (0.5-1.5 h) with 10 {mu}M paraoxon. In vivo paraoxon (0.4 mg/kg, sc) in adult rats elicited about 90% striatal ChE inhibition measured ex vivo, but only about 10% inhibition measured in situ. Histochemical analyses revealed intense AChE and glial fibrillary acidic protein staining near the cannula track, suggesting proliferation of inflammatory cells/glia. The findings suggest that ex vivo and in situ cholinesterase assays can provide very different views into enzyme-inhibitor interactions. Furthermore, the proliferation/migration of cells containing high amounts of cholinesterase just adjacent to a dialysis probe could affect the recovery and thus detection of extracellular acetylcholine in microdialysis studies.

60 APPLIED LIFE SCIENCES↗

The effects of CeO{sub 2} addition on crystallization behavior and pore size in microporous calcium titanium phosphate glass ceramics

Highlights: ► We prepare a phosphate glass ceramic in the system of CaO–TiO{sub 2}–P{sub 2}O{sub 5} and add 2 to 6 mol% CeO{sub 2} to it. We determine the optimum percentage of CeO{sub 2} addition. ► We study phase separation, suitable time and temperature for crystallization in the microporous Calcium Titanium Phosphate Glass Ceramics utilizing DTA, SEM and XRD. ► We investigate on pore size utilizing BET and SEM techniques before and after CeO{sub 2} addition. ► CeO{sub 2} increases the pore size in the Calcium Titanium Phosphate Glass Ceramics. -- Abstract: In this research the effect of the addition of CeO{sub 2} to microporous Calcium Titanium Phosphate glass ceramics was studied. Different molar percentages of CeO{sub 2} were added to three samples of a base glass whose composition was P{sub 2}O{sub 5} 30, CaO 45, TiO{sub 2} 25 (mol%). The first sample had 2 mol% CeO{sub 2}, the second sample had 4 mol% CeO{sub 2}, and the third sample had 6 mol% CeO{sub 2}. The fourth sample did not contain any CeO{sub 2}. The glass samples were melted and crystallized to bulk glass ceramics by a conventional method. Differential Thermal Analysis (DTA) was utilized to determine the appropriate nucleation and crystallization temperatures. Among the samples, the DTA curve of the sample which had 2 mol% CeO{sub 2} had the sharpest crystallization peak. Therefore, this sample was chosen to prepare the glass ceramics. Using X-ray Diffraction (XRD) it was found that in all samples β-Ca{sub 3}(PO{sub 4}){sub 2} and CaTi{sub 4}(PO{sub 4}){sub 6} were the major phases. The β-Ca{sub 3}(PO{sub 4}){sub 2} phase was dissolved away by soaking the glass ceramics in HCl, leaving a porous skeleton of CaTi{sub 4}(PO{sub 4}){sub 6}. CeO{sub 2} addition increased the glass transition temperature and decreased the crystallization time and temperature. It was shown that CeO{sub 2} addition resulted in an increase in the mean pore diameter while the specific surface area decreased. The median pore diameter and specific surface area were determined as 27 nm and 14 m{sup 2}/g, respectively, for the sample containing 2 mol% CeO{sub 2}.

36 MATERIALS SCIENCE↗

Effects on Glass Forming Ability, Microstructure, Crystallization Behaviors, and Magnetic Properties of Si Substituting for P in Fe-Rich Fe{sub 86}B{sub 13−x}Si{sub x}P{sub 1}Cu{sub 0.6}Hf{sub 0.4} Alloys

In the paper, we have studied the effects on glass forming ability (GFA), microstructure, crystallization behaviors, and saturation magnetization (M{sub s}) of Si substitution for P in Fe-rich Fe{sub 86}B{sub 12}Si{sub x}P{sub 1−x}Cu{sub 0.4}Hf{sub 0.6} alloys. The amorphous structure is identified by X-ray diffraction first, and the patterns with Si addition less than x = 0.75 only show one halo scattering peak at 2θ = 45°; further, the ribbons with entirely amorphous structure have been fabricated successfully and the alloys have a good GFA. Then, by differential scanning calorimetry testing, the curves show two separated exothermic peaks and the ribbons will go through a two-step crystallization before reaching stable state; further, the first peak is ensured by the crystallization of a-Fe phase while the second peak is ensured by the precipitation of FeB or Fe(BP) compounds. As Si was added, the apparent activation energy of the first crystallization (E{sub a1}) and the second crystallization (E{sub a2}) shows an increased tendency first and then decreases slightly. By comparison, as x = 0, x = 0.25, and x = 0.5, the ribbons easily form Hf{sub 3}P{sub 2} compounds during the first crystallization process simultaneously, where the ribbons of x = 0.75 and x = 1.0 are easier to finish the first crystallization for forming the uniform a-Fe phase entirely. By vibrating sample magnetometer testing, with the addition of Si, M{sub s} value shows an increased trend and reaches to the maximum about 177.5 emu/g (x = 1.0), and which shows an increased trend in the subsequent annealing process and reaches to the maximum 206.3 emu/g (x = 0), 212.3 emu/g (x = 0.25), 214.2 emu/g (x = 0.5), 214.9 emu/g (x = 0.75), and 208.3 emu/g (x = 1.0) as the annealing temperature higher than T{sub p1} but less than T{sub x2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural investigation and applications of glassy sodium phosphate including the kinetics of dissolution rates and spectral analysis of the prepared samples with a focus on their effects on water treatment

This paper discuss the preparation of the binary system of Phosphate Based Glass (PBG) xP{sub 2}O{sub 5}–(100 − x) Na{sub 2}O mol% and investigates the compositions that form glassy matrix. It is found that x in the range between x = 40–60 mol% and divided in to 5 glass samples (x = 40, 45, 50, 55, 60) and for compositions of 40 > x > 60 no glassy matrix is formed. The intensities of the peak centers of the IR spectra of sodium phosphate glasses and the suggested vibrational modes of structural phosphate chains, terminal groups and tabulated data imply a shift in absorption bands with increasing the Na{sub 2}O mol% content. The amount of bridging phosphorous, shows a maximum value for the glass containing 60 mol% Na{sub 2}O due to the depolymerization of the phosphate matrix with increasing Na{sub 2}O content from 40 to 60 mol% via a breakdown of some terminal bonds (P=O) in the glass network which decreases the bond strength, consequently the peak center is shifted towards lower wave number. Essentially, five compositions of glassy samples were investigated: (x = 40, 45, 50, 55, and 60) mol%. The kinetics of dissolution rate were investigated by two ways: 1—the weight loss data and 2—electrical properties of the solution (pH, Electrical Conductivity) leached by the glass sample in to the deionized water. It is found that with increasing the Na{sub 2}O% content, the pH values, the dissolution rate and the solubility are increasing. It could be noticed that the ionic levels increased with the immersion time and were directly related to the solubility of the glasses. The highest in solubility (x = 40) is the highest in EC and pH values caused by high Na{sub 2}O%. By studying the effect of PBG on the real water medium physical characteristics the following results were achieved: Softening of (Treated drinking water, Nile raw water) by removal of hardness (Ca, Mg) by x = 50; 50% P{sub 2}O{sub 5}–50% Na{sub 2}O, Sequestering and agglomerating of (groundwater, wastewater) of some heavy metals as (Fe, Mn) up to 100% removal by x = 60; 60% P{sub 2}O{sub 5}–40% Na{sub 2}O and the electrical properties (pH, EC) were discussed. Results are assuring the possibility of applying PBG for groundwater treatment of high Fe and Mn content. The data show that municipal groundwater supplies become acceptable according to the guidelines of American Chemistry Council for safe drinking water by using of polyphosphates for water treatment.

54 ENVIRONMENTAL SCIENCES↗