Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHATE MINERALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

The mineralogy of meteorites.

Of particular interest among minerals recently discovered in meteorites are five phosphate minerals, three of them unknown in terrestrial rocks; a chromium nitride and a silicon oxynitride; lonsdaleite and chaoite, new polymorphs of carbon; ringwoodite and majorite, the spinel and garnet analogs of olivine and pyroxene, respectively; a number of calcium- and aluminum-rich silicates in the Allende meteorite, a type III carbonaceous chondrite which fell in 1969; and several alkali-rich silicates found as inclusions in iron meteorites. Knowledge of the compositional range of the common minerals olivine, pyroxene, and plagioclase has also been greatly increased by recent researches.

Mason, B.↗

Dissolution of poorly soluble uranyl phosphate phases in the Metaautunite Subgroup under uranyl peroxide cage cluster forming conditions

Uranyl phosphate minerals are widespread in uranium deposits and usually exhibit very low solubility in aqueous systems. Uranyl phosphates of the autunite group and metaautunite subgroup impact the mobility of uranium in the environment and have inspired groundwater remediation strategies that emphasize their low solubility. The importance of soluble uranium-bearing macro-anions, including nanoscale uranyl peroxide cage clusters, is largely unexplored relative to solubilization of normally low-solubility uranium minerals. Eight synthetic analogs of metaautunite subgroup minerals have been prepared and placed in various alkaline aqueous solutions containing hydrogen peroxide and tetraethylammonium hydroxide. Each uranyl phosphate studied has a topologically identical anionic sheet of uranyl square bipyramids and phosphate tetrahedra combined with various cations (Li + , Na + , K + , Rb + , Cs + , Mg 2+ , Ca 2+ , Ba 2+ ) and water in the interlayer. Uranyl peroxides formed under many of the experimental conditions examined, including solid studtite [(UO 2 )(O 2 )(H 2 O) 2 ](H 2 O) 2 and soluble uranyl peroxide cage clusters containing as many as 28 uranyl ions. Uranyl phosphate solids in contact with solutions in which uranyl peroxide cage clusters formed dissolved extensively or completely. The greatest dissolution of uranyl phosphates occurred in systems that contained cations with larger hydrated radii, Li + and Na + . The details of the uranium speciation in solution depended on the pH and counter cations provided from the interlayers of the uranyl phosphate solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Role of Organic Functional Groups in the Ionothermal Synthesis of Uranyl Phosphate Materials

Four new hybrid organic-inorganic uranyl phosphate compounds were structurally characterized after single crystals were grown via ionothermal synthesis using the ionic liquids 1-ethyl-3-methylimidazolium dimethyl phosphate and 1-ethyl-3-methylimidazolium dibutyl phosphate. Three of the new crystal structures presented here incorporate dimethyl or monomethyl phosphate ligands into the structural unit to form one chain-based compound and two sheet-based compounds. One of the structures utilizes dibutyl phosphate to form a previously reported uranyl compound, a structural polymorph that crystallized in space group P2 1 /c in contrast to the previously reported P-1 structure. The structural and topological relationships are compared to those of uranyl phosphate minerals as well as previously reported organophosphate compounds. Finally, the roles of the organics on the phosphate anions in impacting uranyl coordination and stabilizing the crystal structures are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Volatile Abundances of Apatite in CK and R Chondrites: Implications for Apatite Volatile Records in Oxidized and Thermally Altered Chondrite Parent Bodies

The mineral apatite [Ca5(PO4)3(F,Cl,OH)] is one of the primary mineralogical reservoirs for phosphorus on Earth, and it is a common phosphate mineral within a broad range of extraterrestrial samples. Naturally occurring apatite hosts F, Cl, and OH as essential structural constituents, and all three make up the apatite endmembers fluorapatite, chlorapatite, and hydroxylapatite, respectively. The presence of apatite in chondrite parent bodies indicates that apatite may hold a record of volatiles and their associated processes during the nascent stages of planetesimal formation and evolution.

F. M. McCubbin↗

Hydration structure and water exchange kinetics at xenotime–water interfaces: implications for rare earth minerals separation

Hydration of surface ions gives rise to structural heterogeneity and variable exchange kinetics of water at complex mineral–water interfaces. In this work, we employ ab initio molecular dynamics (AIMD) simulations and water adsorption calorimetry to examine the aqueous interfaces of xenotime, a phosphate mineral that contains predominantly Y 3+ and heavy rare earth elements. Consistent with natural crystal morphology, xenotime is predicted to have a tetragonal prismatic shape, dominated by the {100} surface. Hydration of this surface induces multilayer interfacial water structures with distinct OH orientations, which agrees with recent crystal truncation rod measurements. The exchange kinetics between two adjacent water layers exhibits a wide range of underlying timescales (5–180 picoseconds), dictated by ion–water electrostatics. Adsorption of a bidentate hydroxamate ligand reveals that {100} xenotime surface can only accommodate monodentate coordination with water exchange kinetics strongly depending on specific ligand orientation, prompting us to reconsider traditional strategies for selective separation of rare-earth minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphates in pallasite meteorites as probes of mantle processes in small planetary bodies

Trace element analyses of the phosphates minerals in stony-iron pallasite meteorites are used here to investigate the magmatic history of the silicate portions of pallasites. In Eagle Station and seven other pallasites, the phosphates have relatively low concentrations of REEs and are strongly enriched in heavy relative to light REE. These patterns are consistent with formation of phosphate by subsolidus reactions between metal and silicate, in which phosphate inherits the REE pattern of olivine. In Springwater and Santa Rosalia, calcium-rich phosphates have higher concentrations of REE, are enriched in light relative to heavy REE, and have negative europium anomalies. These patterns are consistent with crystallization of phosphate from a europium-depleted chondritic liquid. This is unlikely to have happened near the base of the differentiating parent-body mantle; it suggests that some pallasites may come from regions of their parent bodies much nearer the surface than the core-mantle boundary.

Davis, Andrew M.↗

Phosphate (U-Th)/He Thermochronology of Apollo 14 Melt Breccia 14311

Our ability to confidently characterize the impact history of the inner solar system is limited by discrepancies in radiometric dates and age interpretations for lunar rocks, impact melts, and recovered meteorites. It is therefore important to explore different thermally sensitive radiometric systems to unravel the timing and extent of the long term impact flux. Low-temperature thermochronology of lunar samples has the potential to provide more complementary geochronological datasets and further test dynamical models related to the evolution of the inner solar system (e.g., [1]). (U-Th)/He dating is based on the production of 4He atoms by radioactive alpha decay of U and Th (and to a lesser extent, Sm) in a crystal and the thermally activated volumetric diffusion of those 4He nuclides. At high temperatures, the crystal is an open system from which 4He can escape; at lower temperatures, 4He may be retained. This retention temperature depends on factors such as crystal structure and volume fraction of radiation damage in the crystal (e.g., [2, 3]), but is significantly lower for phosphate minerals compared to the diffusion of the radiogenic daughter products in other widely used chronometric systems (e.g., ~75°C in terrestrial apatite (U-Th)/He vs. ~500°C in apatite U-Th-Pb vs. ~900°C in zircon U-Th-Pb chronometry). Phosphate (U-Th)/He dating has been used to decipher peak temperatures and cooling rates related to terrestrial impact events (e.g., [4]). Pairing a low-temperature thermochronometer with higher-temperature approaches (i.e., a combined 207Pb-206Pb and (U-Th)/He approach), can therefore resolve multiple impact ages within a given sample or even grain. However, despite its potential, phosphate (U-Th)/He dating has not been reported on any lunar samples. Here we present the first lunar phosphate (U-Th)/He thermochronology on an Apollo 14 impact melt-breccia.

C A Diaz↗

Cycling phosphorus on the Archean Earth: Part II. Phosphorus limitation on primary production in Archean ecosystems

Several lines of evidence point to low rates of net primary production (NPP) in Archean oceans. However, whether Archean NPP was limited by electron donors or nutrients, particularly phosphorus (P), and how these factors might have changed over a billion years of recorded Archean history, remains contentious. One major challenge is to understand quantitatively the biogeochemical cycling of P on the early Earth. In Part I of this series (Hao et al., 2020), we estimated the weathering flux of P to the oceans as a function of temporally increasing continental emergence and elevation through Archean time. In Part II, we conduct thermodynamic and kinetic simulations to understand key processes of P cycling within the Archean ocean, including seafloor weathering, recycling of organic P, the solubility and precipitation of secondary phosphate minerals, and the burial diagenesis of P precipitates. Our calculations suggest low solubilities of apatite minerals in Archean seawater, primarily due to nearly neutral pH and high levels of Ca. This low solubility, in turn, implies a negligible contribution of apatite dissolution to P bioavailability in Archean seawater. We also simulate the solubility limits of common secondary P-bearing minerals, showing that vivianite would have been the least soluble P mineral in ferruginous Archean seawater (0.1–0.3 µM), even at moderate supersaturation states (Ω = 100 or 1000). If vivianite precipitation was kinetically favorable by microbial activities and mineral adsorption, the sinking flux of P as vivianite in Archean seawater could have reached the modern sinking flux, implying that vivianite precipitation was a potentially major sink for P in Archean oceans. During burial diagenesis, however, vivianite in porewater would have become less stable than Ca-phosphates of lower solubility. At elevated temperatures (>100 °C) associated with burial diagenesis and low-grade metamorphism, vivianite is predicted to react irreversibly with calcite to form apatite. Optimistic assumptions about the recycling efficiency of P on the Archean Earth lead us to estimate that by the end of the eon the total flux of P (continental weathering + recycling) could have supported NPP at levels up to 7% of the modern. The total flux of P would have been much lower on the early and middle Archean Earth, whereas fluxes of electron donors could have been higher, suggesting very low productivity and P-limitation of marine ecosystems during much of the eon. Comparing our estimates of NPP as limited by P supply with the estimate by Ward et al. (2019), in which NPP was limited by electron donors and metabolic efficiency, there could have been a transition between P-limited productivity in the early to middle Archean to electron donor-limitation closer to the eon’s end (assuming no oxygenic photosynthesis). Once oxygenic photosynthesis reached ecological significance, probably near the end of the Archean, our estimated flux of P would allow rapid oxidation of atmosphere.

Vivianite↗

Plant Growth Experiments in Zeoponic Substrates: Applications for Advanced Life Support Systems

A zeoponic plant-growth system is defined as the cultivation of plants in artificial soils, which have zeolites as a major component (Allen and Ming, 1995). Zeolites are crystalline, hydrated aluminosilicate minerals that have the ability to exchange constituent cations without major change of the mineral structure. Recently, zeoponic systems developed at the National Aeronautics and Space Administration (NASA) slowly release some (Allen et at., 1995) or all of the essential plant-growth nutrients (Ming et at., 1995). These systems have NH4- and K-exchanged clinoptilolite (a natural zeolite) and either natural or synthetic apatite (a calcium phosphate mineral). For the natural apatite system, Ca and P were made available to the plant by the dissolution of apatite. Potassium and NH4-N were made available by ion-exchange reactions involving Ca(2+) from apatite dissolution and K(+) and NH4(+) on zeolitic exchange sites. In addition to NH4-N, K, Ca, and P, the synthetic apatite system also supplied Mg, S, and other micronutrients during dissolution (Figure 1). The overall objective of this research task is to develop zeoponic substrates wherein all plant growth nutrients are supplied by the plant growth medium for several growth seasons with only the addition of water. The substrate is being developed for plant growth in Advanced Life Support (ALS) testbeds (i.e., BioPLEX) and microgravity plant growth experiments. Zeoponic substrates have been used for plant growth experiments on two Space Shuttle flight experiments (STS-60; STS-63; Morrow et aI., 1995). These substrates may be ideally suited for plant growth experiments on the International Space Station and applications in ALS testbeds. However, there are several issues that need to be resolved before zeoponics will be the choice substrate for plant growth experiments in space. The objective of this paper is to provide an overview on recent research directed toward the refinement of zeoponic plant growth substrates.

Ming, Douglas W.↗

Tambo Quemado: Extraordinary concentrations of REE and refractory trace elements caused by artificial heating

Buchwald examined samples of the IIIB iron Tambo Quemado (TAMQ) cut from the 130 kg main mass. He determined it had been artificially heated, at some time prior to being reported, in an attempt to obtain metal from it. Although the Widmanstatten structure appears relatively unaffected under macroscopic examination, microscopic study of etched sections reveals the effect of the heating. Taenite and plessite area boundaries are indistinct due to high temperature diffusion. Schreibersite, once present in significant amounts, has been melted. Schreibersites in the interior have resolidified in fine-grained eutectic textures surrounded by dark-etching metal rims supersaturated with phosphorus. Buchwald states that phosphate minerals were probably present originally, because graftonite, and its polymorph sarcopside (both essentially Fe3(PO4)2), are common in irons of the IIIB groups. Based on his metallographic study Buchwald estimates TAMQ was heated to 1000 C for about one hour. An interior sample from TAMQ was examined in order to determine what effect this unintended heating 'experiment' had upon the phosphate phases.

Olsen, E.↗

Vivianite oxidation is not photocatalyzed

Vivianite is a hydrous Fe2+ phosphate mineral found in anoxic environments that plays an integral role in P cycling and environmental biogeochemistry. Imbued in the vivianite literature dating as far back as 1918 is the notion that vivianite is light-sensitive and susceptible to rapid photooxidation induced entirely by solar light. However, despite an exhaustive search, to our knowledge this conventionally accepted assumption has never been directly tested, nor has the band gap ever been measured. Resolving this question of photochemical control of vivianite redox chemistry is important for performing and interpreting experiments involving vivianite reactivity with contaminants, and potentially iron and phosphate cycling in the photic zone of aquatic systems. The present study was specifically designed to add¬ress this question. Pure synthetic vivianite samples were irradiated in aqueous suspensions with a Xe lamp at conditions mimicking the solar spectrum and compared to dark controls. Particles stirred in anoxic suspensions for up to 66 days showed no detectable oxidation irrespective of light exposure, according to colorimetric Fe2+/Fe3+ assays, micro X-ray diffraction, and Raman spectroscopy. In contrast, the same experiment performed using air-equilibrated suspensions showed systematic oxidation of up to ~80% mol% Fe(II) at 66 days, but again with no detectable light exposure effect. To test for UV reactivity, further experiments on vivianite powders under air versus N2 atmosphere were performed using a Hg lamp with a longpass filter. In contrast to oxidation in air where no effect of light was detected, after 24 hrs irradiation anoxically, 0.78% Fe was oxidized compared to dark controls, and after 13 days only an additional 0.3% Fe was oxidized. The band gap of pure vivianite was measured by the Tauc method to be 3.5 eV. Contrary to previous reports, solar light has minimal impact on the oxidation of pure vivianite, insignificant in particular when compared to its relatively fast oxidation by oxygen exposure. As such, light does not need to be excluded when running typical vivianite laboratory experiments. Long-term storage of natural vivianite in museums or private collections should continue protective measures given that a possible photocatalytic role of impurities cannot yet be ruled out. Nonetheless, at all depths in natural aquatic systems it appears that the primary abiotic control on the reactivity and half-life of vivianite particles should be the dissolved oxygen concentration, not light exposure.

Vivianite, photochemistry, oxidation↗

Are Polyphosphates or Phosphate Esters Prebiotic Reagents?

It is widely held that there was a phosphate compound in prebiotic chemistry that played the role of adenosine triphosphate and that the first living organisms had ribose-phosphate in the backbone of their genetic material. However, there are no known efficient prebiotic synthesis of high-energy phosphates or phosphate esters. We review the occurrence of phosphates in nature, the efficiency of the volcanic synthesis of P4O10, the efficiency of polyphosphate synthesis by heating phosphate minerals under geological conditions, and the use of high-energy organic compounds such as cyanamide or hydrogen cyanide. These are shown to be inefficient processes especially when the hydrolysis of the polyphosphates is taken into account. For example, if a whole atmosphere of methane or carbon monoxide were converted to cyanide which somehow synthesized polyphosphates quantitatively, the polyphosphate concentration in the ocean would still have been insignificant. We also attempted to find more efficient high-energy polymerizing agents by spark discharge syntheses, but without success. There may still be undiscovered robust prebiotic syntheses of polyphosphates, or mechanisms for concentrating them, but we conclude that phosphate esters may not have been constituents of the first genetic material. Phosphoanhydrides are also unlikely as prebiotic energy sources.

Keefe, Anthony D.↗

Formation, cooling history and age of impact events on the IIE iron parent body: Evidence from the Miles meteorite

Most iron meteorites formed in planetary cores during differentiation, but the IIE iron meteorites have chemical and physical features that are inconsistent with this origin. By combining mineral chemistry, mineral modes and three-dimensional petrography, we reconstruct the bulk chemistry of the felsic silicate-bearing Miles IIE iron meteorite and demonstrate that the silicate inclusion compositions are similar to partial melts produced experimentally from an H chondrite composition. We use the reconstructed bulk composition, mineralogy and thermodynamic modelling to show that melting above ~ 1200°C under reducing conditions formed metal (Fe-Ni alloy) and felsic silicate partial melts. Upon cooling, the melts crystallized Mg-rich pyroxenes, Na- and K-rich feldspars, and tridymite. Importantly, this mechanism enriches cosmochemically volatile elements (i.e., those with a 50% condensation temperature of ~430–830°C, like Na and K) to the level found in the felsic silicate inclusions. The presence of crystallographically disordered srilankite (only stable above 1160°C) and an absence of Widmanstätten texture require both high peak temperatures and rapid cooling, which cannot be explained by core formation. Instead, they point to small melt volumes, a transient heat pulse, and small thermal mass, and imply efficient physical segregation of silicate and metallic melts through buoyancy separation followed by rapid cooling that arrested the separation of metal and silicate liquid phases. In situ 207 Pb/ 206 Pb age of 4542.3 ± 4.0 Ma in Zr-oxide and phosphate minerals dates the melting event that formed the silicate inclusions. This age aligns with the earliest ages found in other IIE iron meteorite silicates and requires a heating event ~25 million years after the solar system formed. We found 39 Ar/ 40 Ar ages of 3495 ± 52 Ma (low-T) and 4303 ± 7 Ma (high-T) in a K-feldspar grain, with the 3495 Ma age aligning with later thermal events recorded in other IIE iron meteorites. Dating reveals the complex petrogenetic and thermal history of Miles and the IIE iron meteorites. This is the first IIE iron meteorite found to record evidence of heating at 4.5 and 3.5 Ga likely from impact events. We propose that high-velocity impact(s) into an iron-rich, porous chondritic parent body at ~4.54 Ga produced immiscible metal and silicate melts that cooled rapidly and trapped low density silicate inclusions within high density metal. Other IIE irons that formed at lower peak temperatures (900–1000°C) contain chondritic silicate inclusions and relict chondrules, supporting this conceptual model. In conclusion, this petrogenesis is consistent with thermodynamic modelling, experimental data and the wide range of peak temperatures and cooling rates observed in the IIE iron meteorites.

58 GEOSCIENCES↗

Coupling geophysical, geological, geochemical and mineralogical assessments to examine preferential contaminant transport pathways in interbedded fractured bedrock

This study shows that a multi-faceted approach, combining borehole geophysical logging and surface seismic P-wave first-arrival tomography with confirmatory coring, well installation, and chemical and mineralogical analysis, is effective for identifying difficult-to-locate preferential contaminant transport pathways in deeper fractured bedrock. Seismic tomography detected porous 10–20 m wide elongated fractured conduits that allow acidic groundwater contaminated with uranium (U) and nitrate (NO 3 - ) to migrate within interbedded shale-limestone bedrock over 1000 m from a former disposal facility (S-3 Ponds site) located at the DOE Y-12 National Security Complex in Tennessee (USA). Conventional drilling techniques would easily miss these conduits because they are oriented parallel with fractured bedding planes. Synchrotron analysis of aquifer solids revealed that > 95 % of the U is hexavalent (U VI ). This uranyl (UO 2 2+ ) species is coordinated with carbonate, iron oxide, silicate and phosphate minerals within cemented white to yellow precipitates, which contain U concentrations as high as ∼21.6 % by weight fraction. Identifying the presence of these mineral phases, enables a further understanding of the potential effectiveness of remediation actions. The combination of methodologies presented here can also be applied to other explorations, such as the detection of water supply.

Fate and transport↗

Shock Compression of Fluorapatite to 120 GPa

Apatite is a phosphate mineral relevant to shock metamorphism in planetary materials. Here, we report on the response of natural fluorapatite from Durango, Mexico under shock wave loading between 14.5 and 119.5 GPa. Wave profile measurements were obtained in plate-impact experiments conducted on [0001]-oriented fluorapatite single crystals. To GPa peak stresses, we observed a two-wave structure indicating an elastic-inelastic response with elastic wave amplitudes of 10.5–13.1 GPa. Between 39.1 and 62.1 GPa, a complex wave structure was observed involving the propagation of three waves. At and above 73.7 GPa, only a single shock wave was observed. The data above 73.7 GPa provided the following linear shock velocity – particle velocity relationship: U s = 6.5(2) + 0.78(6) u p , (mm/μs). Above 80 GPa, the densities in the shocked state exceed both the extrapolated 300-K density of fluorapatite and the predicted 300-K density for a mixture of the high-pressure assemblage, tuite and CaF 2 . Furthermore, this result indicates that fluorapatite undergoes a transition to a denser structure under shock loading at these conditions. The shock response of fluorapatite is observed to be similar to enstatite but stiffer than quartz and albite at the stresses examined in this work.

58 GEOSCIENCES↗

Phosphorus chemistry in plant charcoal: interplay between biomass composition and thermal condition

Background Vegetation fire may change Phosphorus (P) cycling in terrestrial ecosystems through converting biomass into fire residues. Aim The aim of this study was to understand the chemistry and mobility of P in fire residues to help reveal P thermochemistry during biomass burning and post-fire P cycling. Methods A combination of sequential extraction, liquid 31P NMR and P K-edge XANES was used to obtain quantitative P speciation and explain P solubilisation behaviours of charcoal. Key results Despite varying diverse P species existing in raw biomass, only two P structural moieties – orthophosphate and pyrophosphate – were identified in charcoal. However, relative abundance of pyrophosphate differs greatly among charcoal samples from different biomass types, ranging between 0 and 40% of total extractable P. Although P K-edge XANES data indicates abundant soluble phosphate minerals, most P (70–90%) is likely occluded physically in the charcoal. The bicarbonate-extractable P (the Olsen-P) varies significantly and cannot be explained by surface P concentration or elemental stoichiometry alone. Conclusion and implications The results suggest the importance of starting biomass P speciation (i.e. molecular structure and complexation environment) and thermal conditions in controlling P speciation and availability in charcoal. The different P chemistry between charcoal and ash suggests the importance of fire types and severity in disturbing the P cycle.

Forestry↗

Variation of lead isotopic composition and atomic weight in terrestrial materials (IUPAC Technical Report)

The isotopic composition and atomic weight of lead are variable in terrestrial materials because its three heaviest stable isotopes are stable end-products of the radioactive decay of uranium ( 238 U to 206 Pb; 235 U to 207 Pb) and thorium ( 232 Th to 208 Pb). The lightest stable isotope, 204 Pb, is primordial. These variations in isotope ratios and atomic weights provide useful information in many areas of science, including geochronology, archaeology, environmental studies, and forensic science. While elemental lead can serve as an abundant and homogeneous isotopic reference, deviations from the isotope ratios in other lead occurrences limit the accuracy with which a standard atomic weight can be given for lead. In a comprehensive review of several hundred publications and analyses of more than 8000 samples, published isotope data indicate that the lowest reported lead atomic weight of a normal terrestrial materials is 206.1462 ± 0.0028 (k = 2), determined for a growth of the phosphate mineral monazite around a garnet relic from an Archean high-grade metamorphic terrain in north-western Scotland, which contains mostly 206 Pb and almost no 204 Pb. The highest published lead atomic weight is 207.9351 ± 0.0005 (k = 2) for monazite from a micro-inclusion in a garnet relic, also from a high-grade metamorphic terrain in north-western Scotland, which contains almost pure radiogenic 208 Pb. When expressed as an interval, the lead atomic weight is [206.14, 207.94]. It is proposed that a value of 207.2 be adopted for the single lead atomic-weight value for education, commerce, and industry, corresponding to previously published conventional atomic-weight values.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Integrated Anaerobic Membrane Bioreactor (AnMBR) – electro assisted fermentation platform for total resource recovery from diverse wastewaters

The overall objective of the project was to demonstrate a successful wastewater resource recovery platform comprising an Anaerobic Membrane Bioreactor (AnMBR) to achieve >50% Carbon sequestration efficiency as Volatile Fatty Acids (VFAs) or as methane gas from agricultural (animal feeding operations) wastewater along with the generation of final water exceeding Biological Nutrient Removal (BNR) standards for indirect potable reuse by coupling with constructed wetlands has been successfully accomplished. The AnMBR achieved stable performance over 350 days, removing 80–90% of COD and BOD₅ and recovering methane (0.17±0.07 L CH4/g COD at 66.5±0.03% v/v) at 3-5 LMH flux and 5-9 days HRT with 3-5% w/v total solids. Phosphorus recovery via CaO addition in an 80-L coagulation-flocculation-sedimentation unit ranged from 40.6% to 99.7%, yielding products with 11.4–13.6% P content and citric acid solubility of 32–38.6% P, comparable to rock phosphate mineral. Ammonium adsorption achieved ~94.5% recovery with exchange capacity of 10 – 16 g NH4-N/kg clinoptilolite. The CW polishing step met Kansas discharge standards for BOD5 and TN (<30 and <10 mg /L,) and approached the TP standard (~2.5 – 4 mg P/L). These findings have either already resulted in two peer reviewed publications, two patent applications, and one publication in conference proceedings.

42 ENGINEERING↗