Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “P(HO)3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Crystal and Magnetic Structures of the Ternary Ho 2 Ni 0.8 Si 1.2 and Ho 2 Ni 0.8 Ge 1.2 Compounds: An Example of Intermetallics Crystallizing with the Zr 2 Ni 1–x P Prototype

We report two new rare-earth (R) ternary intermetallic compounds—Ho 2 Ni 0.8 T 1.2 with T = Si and Ge—that correspond to the R 5 Ni 2 T 3 phase earlier reported to form in Dy–Ni–T and Ho–Ni–T ternary systems. The compounds crystallize in a filled version of the orthorhombic Zr 2 Ni 1–x P-type structure with x = 0.52; their stoichiometry, determined from both single-crystal and powder X-ray diffraction data, is centered on Ho 2 Ni 0.8 T 1.2 with a narrow solid solubility range for the silicide, while the germanide appears to be a line phase. In addition to R = Dy and Ho, R 2 Ni 0.8 T 1.2 compounds also form for R = Y and Tb, representing the first examples of rare-earth-based compounds adopting the Zr 2 Ni 1–x P structural prototype. Bulk magnetization data reveal the main transitions of the ferrimagnetic or ferromagnetic type at TC = 38 K for Ho 2 Ni 0.8 Si 1.2 and TC = 37 K for Ho 2 Ni 0.8 Ge 1.2 , which are followed by subsequent magnetic reordering at lower temperatures. Neutron diffraction shows complex magnetic structures below T C with both ferromagnetic and antiferromagnetic components and magnetic propagation vector κ 1 = [0, 0, 0]. Below T N ≅ 24 K (22 K) for the silicide (germanide), an additional antiferromagnetic coupling following an incommensurate magnetic propagation vector κ 2 = [κ x , 0, 0] appears to coexist with the first magnetic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An aperture synthesis map of HCN emission close to W3 IRS 4

W3 has been observed in the J = 1-0 transition of HCN with the millimeter-wave interferometer at the Hat Creek Observatory with a resolution of 11.5 by 11.1 arcsec. The HCN emission is detected in an isolated cloud with a diameter of 40 arcsec. The cloud is located to the south of IRS 4 and the compact H II region C and coincides with the western far-IR cloud mapped at 400 microns by Jaffe (1983). The total mass of the cloud is estimated to be in the range 250-2500 solar masses. No HCN emission was detected around IRS 5, the location of the other 400 micron peak. Also, no evidence for a new (heretofore undetected at other wavelengths), young main-sequence star earlier than B0 was found in the new continuum map at 3 mm.

Wright, M. C. H.↗

TRACE-P OH and HO2 Measurements with the Airborne Tropospheric Hydrogen Oxides Sensor (ATHOS) on the DC-8

The Airborne Tropospheric Hydrogen Oxides Sensor (ATHOS) measures OH and HO2 from the NASA DC-8. This instrument detects OH by laser induced fluorescence (LIF) in detection chambers at low pressure and detects HO2 by chemical conversion with NO followed by LIF detection. The demonstrated detection limit (S/N=2, 5 min.) for OH is about 0.005 pptv (1x10(exp 6)/cu cm at 2 km altitude) and for HO2 is 0.05 pptv (1x10(exp 6)/cu cm at 2 km altitude). We will use ATHOS to measure OH, HO2, and HO2/OH during TRACE- P, analyze these results by comparing them against fundamental relationships and computer models, and publish the analyses. TRACE-P HO(x), measurements will help develop a clearer picture of the atmospheric oxidation and 0 3 production that occur as Asian pollution spreads across the Pacific Ocean.

Brune, William H.↗

Materials Data on Ho2VPO8 by Materials Project

Ho2VPO8 is Zircon-derived structured and crystallizes in the tetragonal I-4m2 space group. The structure is three-dimensional. there are two inequivalent Ho3+ sites. In the first Ho3+ site, Ho3+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are four shorter (2.37 Å) and four longer (2.39 Å) Ho–O bond lengths. In the second Ho3+ site, Ho3+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are four shorter (2.26 Å) and four longer (2.44 Å) Ho–O bond lengths. V5+ is bonded in a tetrahedral geometry to four equivalent O2- atoms. All V–O bond lengths are 1.73 Å. P5+ is bonded in a tetrahedral geometry to four equivalent O2- atoms. All P–O bond lengths are 1.56 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 1-coordinate geometry to two Ho3+ and one P5+ atom. In the second O2- site, O2- is bonded in a 3-coordinate geometry to two Ho3+ and one V5+ atom.

36 MATERIALS SCIENCE↗

Materials design, synthesis, and transport properties of disordered rare-earth Zintl bismuthides with the anti -Th 3 P 4 structure type

The synthesis, structural elucidation, and transport properties of the extended series Ca 4–x RE x Bi 3 (RE = Y, La–Nd, Sm, Gd–Tm, and Lu; x ≈ 1) and Ca 4–x RE x Bi 3–δ Sb δ (RE = La, Ho, Er, and Lu; x ≈ 1, δ ≈ 1.5) are presented. Structural elucidation is based on single-crystal X-ray diffraction data and confirms the chemical drive of Ca4Bi3 with the cubic anti-Th 3 P 4 structure type (space group I4 ¯3d, no. 220, Z = 4) into a Zintl phase by the introduction of trivalent rare-earth atoms. The structure features complex bonding, heavy elements, and electron count akin to that of valence-precise semiconductors, making it an ideal target for thermoelectrics development. Introducing crystallographic site disorders at the cation site for the Ca 4–x RE x Bi 3 phase and both the cation and anion sites for the Ca 4–x RE x Bi 3–δ Sb δ phase brings about additional desirable characteristics for thermoelectric materials in the context of tuning knobs for lowering thermal conductivity. Electronic structure calculations of idealized Ca 3 YBi 3 and Ca 3 LaBi 3 compounds indicate the opening of indirect bandgaps at the Fermi level with magnitudes Eg = 0.38 eV and 0.57 eV, respectively. The electrical resistivity ρ(T) of some of the investigated phases measured on single crystals evolve in a metallic manner with magnitudes of order 1.4 mΩ cm near 500 K, thus supporting the notion of a degenerate semiconducting state, with the temperature dependence of the Seebeck coefficient α(T) suggesting the p-type behavior. Furthermore, the low electrical resistivity and the realization of a degenerate semiconducting state in the title phases present a window of opportunity for optimizing their carrier concentrations for enhanced thermoelectric performance.

36 MATERIALS SCIENCE↗

Materials Data on HoPS4 by Materials Project

HoPS4 is Zircon-like structured and crystallizes in the tetragonal I4_1/acd space group. The structure is three-dimensional. there are two inequivalent Ho3+ sites. In the first Ho3+ site, Ho3+ is bonded in a 8-coordinate geometry to eight S2- atoms. There are four shorter (2.82 Å) and four longer (2.99 Å) Ho–S bond lengths. In the second Ho3+ site, Ho3+ is bonded in a distorted body-centered cubic geometry to eight S2- atoms. All Ho–S bond lengths are 2.90 Å. P5+ is bonded in a tetrahedral geometry to four S2- atoms. There are two shorter (2.04 Å) and two longer (2.05 Å) P–S bond lengths. There are two inequivalent S2- sites. In the first S2- site, S2- is bonded in a 3-coordinate geometry to two Ho3+ and one P5+ atom. In the second S2- site, S2- is bonded in a distorted T-shaped geometry to two Ho3+ and one P5+ atom.

36 MATERIALS SCIENCE↗

Influence of Surface and Structural Variations in Donor–Acceptor–Donor Sensitizers on Photoelectrocatalytic Water Splitting

Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D–A–D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5′-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore–catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the −COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4′-((HO) 2 OPCH 2 )2-2,2′-bipyridine)(OH 2 )] 2 , RuCt 2+ , or proton reduction catalyst [Ni(P 2 Ph N 2 C 6 H 4 CH 2 PO 3 H 2 ) 2 ] 2+ , NiCt 2+ , on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO 2 |TiO 2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore–catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore–catalyst assemblies.

Chromophores↗

Muon spin rotation and relaxation in Pr 1 - x Nd x Os 4 Sb 12 : Superconductivity and magnetism in Pr-rich alloys

The Pr-rich end 0 ≤ x ≤ 0.25 of the alloy series Pr 1-x Nd x ⁢Os 4 ⁢Sb 12 has been studied using muon spin rotation and relaxation. The end compound PrOs 4 ⁢Sb 12 is an unconventional heavy-fermion superconductor, which exhibits a spontaneous magnetic field associated with broken time-reversal symmetry (TRS) in the superconducting phase. Further, no such field is observed in the Nd-doped alloys for x ≥ 0.05, indicating that TRS has been restored. The superfluid density from the vortex-lattice field distribution is insensitive to Nd concentration for x ≲ 0.2, indicating that TRS restoration does not have a strong effect on the superconducting state. No Nd 3+ static magnetism, ordered or disordered, is found down to the lowest temperatures of measurement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Materials Data on Ho2(MoO4)3 by Materials Project

Ho2Mo3O12 crystallizes in the tetragonal P-42_1m space group. The structure is three-dimensional. Ho3+ is bonded in a 7-coordinate geometry to seven O2- atoms. There are a spread of Ho–O bond distances ranging from 2.24–2.43 Å. There are two inequivalent Mo6+ sites. In the first Mo6+ site, Mo6+ is bonded in a tetrahedral geometry to four O2- atoms. There is three shorter (1.78 Å) and one longer (1.83 Å) Mo–O bond length. In the second Mo6+ site, Mo6+ is bonded in a tetrahedral geometry to four equivalent O2- atoms. All Mo–O bond lengths are 1.79 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted linear geometry to one Ho3+ and one Mo6+ atom. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to one Ho3+ and one Mo6+ atom. In the third O2- site, O2- is bonded in a distorted trigonal planar geometry to two equivalent Ho3+ and one Mo6+ atom. In the fourth O2- site, O2- is bonded in a linear geometry to one Ho3+ and one Mo6+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Mg3P2(HO)16 by Materials Project

Mg3P2(HO)16 crystallizes in the monoclinic C2/c space group. The structure is two-dimensional and consists of four Mg3P2(HO)16 sheets oriented in the (0, 1, 0) direction. there are three inequivalent Mg2+ sites. In the first Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with four equivalent PO4 tetrahedra and an edgeedge with one MgO6 octahedra. There are four shorter (2.07 Å) and two longer (2.17 Å) Mg–O bond lengths. In the second Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with four equivalent PO4 tetrahedra and an edgeedge with one MgO6 octahedra. There are a spread of Mg–O bond distances ranging from 2.03–2.17 Å. In the third Mg2+ site, Mg2+ is bonded to six O2- atoms to form MgO6 octahedra that share corners with two equivalent PO4 tetrahedra. There are a spread of Mg–O bond distances ranging from 2.05–2.16 Å. P5+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with five MgO6 octahedra. The corner-sharing octahedra tilt angles range from 46–57°. There are a spread of P–O bond distances ranging from 1.55–1.57 Å. There are eight inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to two O2- atoms. There is one shorter (1.00 Å) and one longer (1.73 Å) H–O bond length. In the second H1+ site, H1+ is bonded in a single-bond geometry to two O2- atoms. There is one shorter (1.00 Å) and one longer (1.74 Å) H–O bond length. In the third H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the fifth H1+ site, H1+ is bonded in a distorted single-bond geometry to two O2- atoms. There is one shorter (1.02 Å) and one longer (1.64 Å) H–O bond length. In the sixth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. There are eight inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted water-like geometry to one Mg2+ and two H1+ atoms. In the second O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to one Mg2+, one P5+, and one H1+ atom. In the third O2- site, O2- is bonded in a distorted water-like geometry to one Mg2+ and two H1+ atoms. In the fourth O2- site, O2- is bonded in a 2-coordinate geometry to one Mg2+ and one P5+ atom. In the fifth O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to one Mg2+ and two H1+ atoms. In the sixth O2- site, O2- is bonded in a 2-coordinate geometry to one Mg2+, one P5+, and two H1+ atoms. In the seventh O2- site, O2- is bonded in a 3-coordinate geometry to two Mg2+ and one P5+ atom. In the eighth O2- site, O2- is bonded in a 3-coordinate geometry to one Mg2+ and two H1+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ho2(SeO3)3 by Materials Project

Ho2(SeO3)3 crystallizes in the triclinic P-1 space group. The structure is three-dimensional. there are two inequivalent Ho3+ sites. In the first Ho3+ site, Ho3+ is bonded in a pentagonal bipyramidal geometry to seven O2- atoms. There are a spread of Ho–O bond distances ranging from 2.21–2.46 Å. In the second Ho3+ site, Ho3+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are a spread of Ho–O bond distances ranging from 2.27–2.61 Å. There are three inequivalent Se4+ sites. In the first Se4+ site, Se4+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There are a spread of Se–O bond distances ranging from 1.69–1.76 Å. In the second Se4+ site, Se4+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There is one shorter (1.71 Å) and two longer (1.75 Å) Se–O bond length. In the third Se4+ site, Se4+ is bonded in a trigonal non-coplanar geometry to three O2- atoms. There is one shorter (1.70 Å) and two longer (1.74 Å) Se–O bond length. There are nine inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to one Ho3+ and one Se4+ atom. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to one Ho3+ and one Se4+ atom. In the third O2- site, O2- is bonded in a 3-coordinate geometry to two Ho3+ and one Se4+ atom. In the fourth O2- site, O2- is bonded in a distorted trigonal planar geometry to two Ho3+ and one Se4+ atom. In the fifth O2- site, O2- is bonded in a 3-coordinate geometry to two Ho3+ and one Se4+ atom. In the sixth O2- site, O2- is bonded in a 2-coordinate geometry to two Ho3+ and one Se4+ atom. In the seventh O2- site, O2- is bonded in a bent 120 degrees geometry to one Ho3+ and one Se4+ atom. In the eighth O2- site, O2- is bonded in a 3-coordinate geometry to two Ho3+ and one Se4+ atom. In the ninth O2- site, O2- is bonded in a 3-coordinate geometry to two equivalent Ho3+ and one Se4+ atom.

36 MATERIALS SCIENCE↗

Thermal Stability and Decomposition Products of P-Doped Ferrihydrite

This work aimed to determine the effect of various amounts of P admixtures in synthetic ferrihydrite on its thermal stability, transformation processes, and the properties of the products, at a broad range of temperatures up to 1000 °C. A detailed study was conducted using a series of synthetic ferrihydrites Fe 5 HO 8 ·4H 2 O doped with phosphates at P/Fe molar ratios of 0.2, 0.5, and 1.0. Ferrihydrite was synthesized by a reaction of Fe 2 (SO 4 ) 3 with 1 M KOH at room temperature in the presence of K 2 HPO 4 at pH 8.2. The products of the synthesis and the products of heating were characterized at various stages of transformation by using differential thermal analysis accompanied with X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy-energy dispersive X-ray spectroscopy. Coprecipitation of P with ferrihydrite results in the formation of P-doped 2-line ferrihydrite. A high P content reduces crystallinity. Phosphate significantly inhibits the thermal transformation processes. The temperature of thermal transformation increases from below 550 to 710–750 °C. Formation of intermediate maghemite and Fe-phosphates, is observed. The product of heating up to 1000 °C contains hematite associated with rodolicoite FePO 4 and grattarolaite Fe 3 PO 7 . Higher P content greatly increases the thermal stability and transformation temperature of rodolicoite as well.

thermal transformations↗

Oscillator strengths and collision strengths for S II

Calculations are presented of the collision strengths for electron impact excitation of S II from the ground 3s(2)3p(3)(4)S0 state to excited states 3s3p(4)(4)p, 3s(2(3p(2)4s(4)P, and 3s(2)3p(2)3d(4)P. The collision strengths are calculated in a close-coupling approximate ion for the energy range up to 10 to the 6th K. In addition, oscillator strengths are given for these transitions, as well as for some UV lines which have lower states 3s(2)3p(3)(2)D(O) and 3s(2)3p(3)(2)P(0). The calculation of the collision strengths involves the use of configuration interaction target wave functions which give oscillator strengths accurate to 30 percent in most cases.

Ho, Y. K.↗

Development of infrared sensors using energy transfer/energy upconversion processes: Study of laser excited fluorescence in rare Earth ion doped crystals

A summary is presented of the spectroscopic study of three systems: LaF3:Ho(3+), LaF3:Er(3+) and CaF2:Nd(3+). When the D levels of Ho(3+) in LaF3 were resonantly excited with a laser beam of 640 nm, upconverted emissions were detected from J (416 nm), F (485 nm), and E (546 nm) levels. Energy upconverted emissions were also observed from F and E levels of Ho(3+) when the material was excited with an 800 nm near infrared laser. When the D levels of Er(3+) in LaF3 were resonantly excited with a laser beam of 637 nm, upconverted emissions were detected from the E (540 nm) and P (320, 400, and 468 nm) levels. Energy upconverted emissions were also observed from F, E, and D levels of Er(3+) when the material was resonantly excited with an 804 nm near infrared laser. When the D levels of Nd(3+) in CaF2 were resonantly excited with a laser beam of 577 nm, upconverted emissions were detected from the L (360 and 382 nm), K (418 nm), and I (432 nm) levels. Very weak upconverted emissions were detected when this system was irradiated with a near infrared laser. The numbers in parentheses are the wavelengths of the emissions.

Nash-Stevenson, S. K.↗

The rotating molecular core in G10.6 - 0.4: Synthesis maps in (12)C(18)O

Using the Owens Valley Radio Observatory millimeter-wave interferometer, the compact molecular cloud core surrounding the H II region G10.60-0.4 has been resolved in the C(18)O J = 1-0 transition. Since this line is most likely optically thin, it is an excellent tracer of the total column density. We find a centrally condensed and flattened (12.6 sec x 4.2 sec ; 0.3 pc x 0.1 pc) core, which is rotating rapidly with a substantial velocity gradient (17 +/- 2 km/s pc) along the major axis. The core is quite bright (greater than 10K), dense (greater than (10(exp 6)/cu cm), massive (10(exp 3) solar mass), and embedded in a more extended (greater than 60 seconds) envelope. There is no evidence for absorption, implying that the C(18)O emitting gas is both optically thin and substantially hotter than the equivalent continuum temperature at 3 mm. The systemic velocity of the rotating core is -2.5 +/- 0.5 km/s, the same as the systemic velocity of the extended cloud.

Ho, Paul T. P.↗

Development of flashlamp-pumped Q-switched Ho:Tm:Cr:YAG lasers for mid-infrared LIDAR application

A flashlamp-pumped 2.1 micron Ho:Tm:Cr:YAG laser was studied for both normal mode and Q-switched operations under a wide variety of experimental conditions in order to optimize performance. Laser output energy, slope efficiency, threshold and pulselength were determined as a function of operating temperature, output mirror reflectivity, input electrical energy and Q-switch opening time. The measured normal-mode laser thresholds of a Ho(3+) (0.45 atomic percent):Tm(3+) (2.5 atomic percent):Cr(3+) (0.8 atomic percent):YAG crystal ranged form 26 to 50 J between 120 and 200 K with slope efficiencies up to 0.36 percent with a 60 percent reflective output mirror. Under Q-switched operation the slope efficiency was 90 percent of the normal-mode result. Development of solid state lasers with Ho(3+), Tm(3+) and/or Er(3+) doped crystals has been pursued by NASA for eye-dafe mid-infrared LIDAR (light detection and ranging) application. As a part of the project, the authors have been working on evaluating Ho(3+):Tm(3+):Cr(3+):YAG crystals for normal-mode and Q-switched 2.1 micron laser operations in order to determine an optimum Tm(3+) concentration under flashlamp pumping conditions. Lasing properties of the Ho(3+) in the mid-infrared region have been studied by many research groups since the early 1960's. However, the technology of those lasers is still premature for lidar application. In order to overcome the inefficiency related to narrow absorption bands of the Ho(3+), Tm(3+) and Er(3+), the erbium has been replaced by chromium. The improvement in flashlamp-pumped Ho(3+) laser efficiency has been demonstrated recently by several research groups by utilizing the broad absorption spectrum of Cr(3+) which covers the flashlamp's emission spectrum. Efficient energy transfer to the Tm(3+) and then the Ho(3+) occurs subsequently. It is known that high Tm(3+) concentration and low Ho(3+) concentration are preferred to achieve a quantum efficiency approaching two and to avoid large reabsorption losses. However, determination of the optimum Tm(3+) concentration required to ensure efficient energy transfer from Cr(3+) to Tm(3+) and from Tm(3+) to Ho(3+) has not been made in the Ho:Tm:CR:YAG crystal. The results obtained so far are given.

Choi, Young S.↗

Materials Data on HoZr6(PO4)9 by Materials Project

HoZr6(PO4)9 crystallizes in the trigonal P-3c1 space group. The structure is three-dimensional. Ho3+ is bonded in a 6-coordinate geometry to six equivalent O2- atoms. All Ho–O bond lengths are 2.34 Å. There are three inequivalent Zr4+ sites. In the first Zr4+ site, Zr4+ is bonded to six O2- atoms to form ZrO6 octahedra that share corners with six equivalent PO4 tetrahedra. There are three shorter (2.08 Å) and three longer (2.11 Å) Zr–O bond lengths. In the second Zr4+ site, Zr4+ is bonded to six O2- atoms to form ZrO6 octahedra that share corners with six PO4 tetrahedra. There are three shorter (2.02 Å) and three longer (2.25 Å) Zr–O bond lengths. In the third Zr4+ site, Zr4+ is bonded to six O2- atoms to form ZrO6 octahedra that share corners with six PO4 tetrahedra. There are three shorter (2.07 Å) and three longer (2.12 Å) Zr–O bond lengths. There are two inequivalent P5+ sites. In the first P5+ site, P5+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with four ZrO6 octahedra. The corner-sharing octahedra tilt angles range from 25–49°. There are a spread of P–O bond distances ranging from 1.53–1.59 Å. In the second P5+ site, P5+ is bonded to four O2- atoms to form PO4 tetrahedra that share corners with four ZrO6 octahedra. The corner-sharing octahedra tilt angles range from 26–27°. There is two shorter (1.52 Å) and two longer (1.56 Å) P–O bond length. There are six inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to one Zr4+ and one P5+ atom. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to one Zr4+ and one P5+ atom. In the third O2- site, O2- is bonded in a bent 150 degrees geometry to one Zr4+ and one P5+ atom. In the fourth O2- site, O2- is bonded in a bent 150 degrees geometry to one Zr4+ and one P5+ atom. In the fifth O2- site, O2- is bonded in a 3-coordinate geometry to one Ho3+, one Zr4+, and one P5+ atom. In the sixth O2- site, O2- is bonded in a bent 150 degrees geometry to one Zr4+ and one P5+ atom.

36 MATERIALS SCIENCE↗