SEARCH · Engineering Papers

Results for “Oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Grain boundary oxidation and an analysis of the effects of pre-oxidation on subsequent fatigue life

The effects of preoxidation on subsequent fatigue life were studied. Surface oxidation and grain boundary oxidation of a nickel-base superalloy (TAZ-8A) were studied at 600 to 1000 C for 10 to 1000 hours in air. Surface oxides were identified and the kinetics of surface oxidation was discussed. Grain boundary oxide penetration and morphology were studied. Pancake type grain boundary oxide penetrates deeper and its size is larger, therefore, it is more detrimental to fatigue life than cone-type grain boundary oxide. Oxide penetration depth, a (sub m), is related to oxidation temperature, T, and exposure time, t, by an empirical relation of the Arrhenius type. Effects of T and t on statistical variation of a (sub m) were analyzed according to the Weibull distribution function. Once the oxide is cracked, it serves as a fatigue crack nucleus. Statistical variation of the remaining fatigue life, after the formation of an oxide crack of a critical length, is related directly to the statistical variation of grain boundary oxide penetration depth.

Oshida, Y.↗

NASA NTRS1988

Grain boundary oxidation and an analysis of the effects of oxidation on fatigue crack nucleation life

Oshida, Y.↗

DOE OSTI2025

Effect of CO on alcohol oxidation over commercial oxidation catalysts for control of emissions from lean-burn engines

For commercialization, alcohol-based net-zero carbon fuels in diesel-driven internal combustion engines must meet emissions standards set by the U.S. Environmental Protection Agency. Here, a series of aged commercial oxidation catalysts, Pt diesel oxidation catalyst (DOC), Pd+Pt DOC, and Pt oxidation catalyst (Pt OC), were studied using an automated flow reactor and in situ DRIFTS techniques to investigate the impact of CO on alcohol oxidation. Surface formate and acetate intermediates were formed due to partial oxidation of methanol and ethanol, respectively. Sequential introduction of alcohol and CO experiments using in situ DRIFTS on all three catalysts showed that CO inhibited low temperature methanol oxidation. Mutual inhibition effects between CO and ethanol were observed during co-oxidation. Acetate species shifted CO oxidation to higher temperatures on Pt DOC and Pt OC, whereas CO pre-exposure inhibited acetate formation. CO oxidation occurred at lower temperatures during ethanol and CO co-oxidation on Pd+Pt DOC.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2023

Plasma-Assisted Chemical-Looping Combustion: Low-Temperature Methane and Ethylene Oxidation with Nickel Oxide

The chemical reaction network of low-temperature plasma-assisted oxidation of methane (CH 4 ) and ethylene (C 2 H 4 ) with nickel oxide (NiO) was investigated in a heated plasma reactor through time-dependent species measurements by electron-ionization molecular beam mass spectrometry (EI-MBMS). Methane (ethylene) oxidation by NiO was explored in temperature ranges from 300-700 °C (300-500 °C) and 300-800 °C (300-600°C) for the plasma and non-plasma conditions, respectively. Significant enhancement of methane oxidation was observed with plasma between 400 and 500 °C, where no oxidation was observed under non-plasma conditions. For the oxidation of methane at higher temperatures three different oxidation stages were observed: I) a period of complete oxidation, II) a period of incomplete CO oxidation, and III) a period of carbon buildup. For the C 2 H 4 experiments, and unlike the CH 4 experiments, the plasma resulted in a significant amount of new intermediate oxygenated species, such as CH 2 O, CH 3 OH, C 2 H 4 O, and C 2 H 6 O. Carbon deposits were observed under both methane and ethylene conditions and verified by X-ray photoelectron spectroscopy (XPS). ReaxFF simulations were performed for the oxidation of CH 4 and C 2 H 4 in a non-plasma environment. The simulated intermediates and products largely agree with the species measured in the experiments, though the predicted intermediate oxygenated species such as CH 2 O and C 2 H 6 O were not observed in experiments under non-plasma conditions. A reaction pathway analysis for CH 4 and C 2 H 4 reacting with NiO was created based on the observed species from the MBMS spectra, along with ReaxFF simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Interfacial Charge Transfer and Substrate-Dependent Oxidation States Drive SMSI Enhancements in Cobalt Oxide Films

Here, we investigated the mechanisms underlying strong metal-support interactions in CO oxidation using model systems where noble metal crystals support reducible, monolayer-thick CoO x films. The effect of the Co oxidation state, film thickness, and substrate identity were studied in varying reaction conditions using ambient pressure X-ray photoelectron spectroscopy. At low O 2 pressures, the same oxide phase forms on both Pt(111) and Au(111) surfaces. But when heated at higher O 2 pressures, the oxide phase depends on the substrate. We found that CoO x /Pt is more active for the CO oxidation reaction than CoO x /Au, even when both surfaces stabilize the same oxide phase. DFT calculations on these and related noble-metal-supported CoO x films reveal an SMSI-induced reactivity enhancement that strongly depends on the oxide film thickness and which is mediated by charge transfer between the metal and oxide. Charge transfer is also found to correlate with the reaction energy and activation barrier for CO oxidation. This effect was found to be greatest for oxide films on Pt, decreasing on other noble metal supports in the order Pt > Pd > Au > Ag, in agreement with the experiments. The role of charge transfer in the activation barriers and reaction energies provides insight into the nature of SMSI-induced catalytic activity, and suggests that the noble metal work function can serve as an indicator for the strength of SMSI effects.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Sorption and Oxidative Degradation of Small Organic Molecules on Mn-Oxides-Effects of pH and Mineral Structures

Manganese (Mn)-oxides regulate carbon (C) cycling in soils by sorbing and oxidizing organic compounds. The composition of soil organic matter varies widely, and little is known about the reactivity of individual organic compounds with structurally diverse Mn-oxides under various environmentally relevant pH conditions. Here, in this study, we examined the affinity of six organic compounds for three Mn-oxides, comprised of layer (birnessite and hydrous Mn oxide HMO) or tunnel (cryptomelane) structures, at acidic (pH 4), slightly acidic (pH 6), and slightly alkaline (pH 8) conditions. Cryptomelane, with a higher specific surface area and point of zero charge, showed higher reactivity than that of HMO and birnessite. Interestingly, these Mn-oxides, although different in structures, decomposed each organic compound to form the same products. Citrate, pyruvate, ascorbate, and catechol induced reduction and dissolution of Mn-oxides. After the reaction, the average oxidation state of Mn in the solids was much lower at pH 4 than at pH 6 and 8, suggesting more reduction under more acidic conditions. Even when reacting with phthalate and propanol, which only sorbed to Mn-oxides but did not degrade, there was proton-promoted Mn dissolution under acidic conditions. These results suggest the significance of environmental pH and mineral structures in affecting the Mn–organic interactions and provide fundamental insights into a better understanding of the roles of Mn-oxides in regulating soil C cycling.

58 GEOSCIENCES↗

DOE OSTI2023

Metal-induced oxidative stress and human plasma protein oxidation after SARS-CoV-2 infection

Pathogenesis of COVID-19 by SARS-CoV-2 resulted in a global pandemic and public health emergency in 2020. Viral infection can induce oxidative stress through reactive oxygen species (ROS). Inflammation and environmental stress are major sources of oxidative stress after infection. Micronutrients such as iron, copper, zinc, and manganese play various roles in human tissues and their imbalance in blood can impact immune responses against pathogens including SARS CoV-2. We hypothesized that alteration of free metal ions during infection and metal-catalyzed oxidation plays a critical role towards pathogenesis after infection. We analyzed convalescent and hospitalized COVID-19 patient plasma using orthogonal analytical techniques to determine redox active metal concentrations, overall protein oxidation, oxidative modifications, and protein levels via proteomics to understand the consequences of metal-induced oxidative stress in COVID-19 plasma proteins. Metal analysis using ICP-MS showed significantly greater concentrations of copper in COVID-19 plasma compared to healthy controls. We demonstrate significantly greater total protein carbonylation, other oxidative modifications, and deamidation of plasma proteins in COVID-19 plasma compared to healthy controls. Proteomics analysis showed that levels of redox active proteins including hemoglobulin were elevated in COVID-19 plasma. Molecular modeling concurred with potential interactions between iron binding proteins and SARS CoV-2 surface proteins. Overall, increased levels of redox active metals and protein oxidation indicate that oxidative stress-induced protein oxidation in COVID-19 may be a consequence of the interactions of SARS-CoV-2 proteins with host cell metal binding proteins resulting in altered cellular homeostasis.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

Cryogenic Carbon Monoxide Oxidation on Cuprous Oxide

Performing oxidation reactions at low temperatures using earth-abundant materials is crucial for advancing solutions for sustainable chemistry. CO oxidation serves as a benchmark reaction to characterize oxidation and to advance fundamental concepts in surface chemistry. While there are several examples of CO oxidation occurring on metal oxides at low temperatures, from 300 K to ∼200 K, reactivity in the cryogenic temperature regime typically requires a metal nanoparticle on a metal oxide. Here, we show oxygen atoms on the (111) facet of Cu 2 O react with CO to form CO 2 at temperatures below 100 K. Combining spectroscopic experimental evidence with calculations, we propose a low barrier path for CO oxidation at reconstructed surface sites on Cu 2 O(111). This finding is a rare example of an earth-abundant metal oxide, in this case copper, that can provide highly reactive multifunctional sites, enabling both adsorption and reaction fundamental steps toward the efficient heterogeneous oxidation of chemicals.

36 MATERIALS SCIENCE↗

DOE OSTI2024

In-situ ETEM study of plasma-facing tungsten nanofuzz oxidation at atmospheric pressure: Microstructure evolution and substrate-free oxidation kinetics

To enable sustainable carbon-free fusion energy, managing reactor structural material degradation during normal operation as well as accident scenarios is vital. Tungsten (W) plasma-facing materials (PFMs) are susceptible to aggressive high-temperature oxidation during air-ingress fusion reactor accidents, yet there's a lack of oxidation kinetic data for irradiated tungsten. Here, in this study, we utilize atmospheric environmental transmission electron microscopy (ETEM) to present the first kinetic data for substrate-free W nanofuzz oxidation at 400 ºC and 500 ºC in 1 bar dry air. Comparison with pristine bulk W during the early parabolic stage suggests an irradiationdecelerated oxidation for W nanofuzz. Our time-resolved in-situ characterization reveals a durable amorphous surface oxide, likely promoted by high-flux He + irradiation-induced surface defects, serving as an effective passivating layer that impedes nanofuzz oxidation onset. This surface oxide layer also interfaces well with newly formed orthorhombic WO 3 , facilitated by stress relief through He bubble shrinkage, providing lasting passivating protection throughout the nanofuzz parabolic oxidation. This new finding challenges conventional notions of irradiation's negative impact on metal oxidation, and calls for advanced characterization to enhance our understanding of fusion energy materials degradation, informed by further accident modeling.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Multi–length scale characterization of point defects in thermally oxidized, proton irradiated iron oxides

A key for the success of safe nuclear power generation system is to consider structural materials that are economical, meet mechanical property needs, possess good corrosion resistance, and are radiation tolerant. Nevertheless, fundamental insights that elucidate the details of radiation damage on materials corrosion performance are lacking. This includes the behavior of surface oxides which often regulate corrosion. For example, it is unclear how non-equilibrium point defects, oxide structure, mass transport in oxides, and subsequent oxidation behavior are altered by the radiation. Here, in this work, some of the effects of proton irradiation on the attributes of point defects, iron oxide microstructures, and the physical nature of the oxidation product were correlated with corrosion behavior. Iron oxides, fabricated by thermal oxidation in air at 400°C and 800°C for 1 h, were subjected to 200 keV, 0.03 dpa (displacements per atom) of proton irradiation, and subjected to corrosion reactivity assessment using AC and DC electrochemical methods. Experimental methods that target materials information at different length scales, such as positron annihilation spectroscopy (atomistic), transmission electron microscopy (mesoscopic), and electrochemical methods (macroscopic), were coupled to shed light on the impact of radiation-induced defect modifications and structural changes in oxides on corrosion reactivity which ultimately affects durability in harsh environments.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Handbook of Molecular Beam Epitaxy of Oxide Materials: Epitaxial Complex Oxide Growth on Semiconductors

This chapter covers the epitaxy of complex oxides on common inorganic semiconductors. The chapter opens with an introduction, motivating the subject and highlighting key general challenges (Section 6.1). We then proceed to describe the general steps of the growth procedure in Section 6.2, which concludes with an overall discussion about trade-offs and expectation management, with an emphasis on the oxide–semiconductor interface. From there, the text describes oxide growth on the common semiconductors, starting with silicon (Section 6.3), where surface reactions and oxidation are the most challenging aspects. Oxide epitaxy on germanium is described in Section 6.4, which is a less challenging oxide growth scheme on semiconductors. Section 6.5 describes oxide epitaxy on gallium arsenide, one of the more challenging schemes, where interface stability and surface preparation pose key challenges. Finally, in Section 6.6, oxide epitaxy on gallium nitride is described, where the lattice mismatch takes the stage as the key challenge. Altogether, this chapter aims to provide the reader with the practical knowledge, tactics and strategies for oxide epitaxy on semiconductors.

Demkov, Alexander A↗

NASA NTRS2008

Comparison of the Isothermal Oxidation Behavior of As-Cast Cu-17 Percent Cr and Cu-17 Percent Cr-5 Percent Al: Oxidation Kinetics - Part 1

The isothermal oxidation kinetics of as-cast Cu-17%Cr and Cu-17%Cr-5%Al in air were studied between 773 and 1173 K under atmospheric pressure. These observations reveal that Cu-17%Cr-5%Al oxidizes at significantly slower rates than Cu-17%Cr. The rate constants for the alloys were determined from generalized analyses of the data without an a priori assumption of the nature of the oxidation kinetics. Detailed analyses of the isothermal thermogravimetric weight change data revealed that Cu-17%Cr exhibited parabolic oxidation kinetics with an activation energy of 165.9+/-9.5 kJ/mol. In contrast, the oxidation kinetics for the Cu-17%Cr-5%Al alloy exhibited a parabolic oxidation kinetics during the initial stages followed by a quartic relationship in the later stages of oxidation. Alternatively, the oxidation behavior of Cu-17%CR-5%Al could be better represented by a logarithmic relationship. The parabolic rate constants and activation energy data for the two alloys are compared with literature data to gain insights on the nature of the oxidation mechanisms dominant in these alloys.

Raj, S. V.↗

NASA NTRS2008

Comparison of the Isothermal Oxidation Behavior of As-Cast Cu-17%Cr and Cu-17%Cr-5%Al: Oxidation Kinetics - Part 1

The isothermal oxidation kinetics of as-cast Cu-17%Cr and Cu-17%Cr-5%Al in air were studied between 773 and 1173 K under atmospheric pressure. These observations reveal that Cu- 17%Cr-5%Al oxidizes at significantly slower rates than Cu-17%Cr. The rate constants for the alloys were determined from generalized analyses of the data without an a priori assumption of the nature of the oxidation kinetics. Detailed analyses of the isothermal thermogravimetric weight change data revealed that Cu-17%Cr exhibited parabolic oxidation kinetics with an activation energy of 165.9 +/- 9.5 kJ/mol. In contrast, the oxidation kinetics for the Cu-17%Cr- 5%Al alloy exhibited a parabolic oxidation kinetics during the initial stages followed by a quartic relationship in the later stages of oxidation. Alternatively, the oxidation behavior of Cu-17%CR- 5%Al could be better represented by a logarithmic relationship. The parabolic rate constants and activation energy data for the two alloys are compared with literature data to gain insights on the nature of the oxidation mechanisms dominant in these alloys.

Raj. Sai V.↗

NASA NTRS2008

Comparison of the Isothermal Oxidation Behavior of As-Cast Cu-17%Cr and Cu-17%Cr-5%Al: Oxidation Kinetics - Part 1

The isothermal oxidation kinetics of as-cast Cu-17%Cr and Cu-17%Cr-5%Al in air were studied between 773 and 1173 K under atmospheric pressure. These observations reveal that Cu- 17%Cr-5%Al oxidizes at significantly slower rates than Cu-17%Cr. The rate constants for the alloys were determined from generalized analyses of the data without an a priori assumption of the nature of the oxidation kinetics. Detailed analyses of the isothermal thermogravimetric weight change data revealed that Cu-17%Cr exhibited parabolic oxidation kinetics with an activation energy of 165.9 9.5 kJ mol-1. In contrast, the oxidation kinetics for the Cu-17%Cr- 5%Al alloy exhibited a parabolic oxidation kinetics during the initial stages followed by a quartic relationship in the later stages of oxidation. Alternatively, the oxidation behavior of Cu-17%CR- 5%Al could be better represented by a logarithmic relationship. The parabolic rate constants and activation energy data for the two alloys are compared with literature data to gain insights on the nature of the oxidation mechanisms dominant in these alloys.

Raj. Sai V.↗

DOE OSTI2023

Ionic Liquid-Mediated Scanning Probe Electro-Oxidative Lithography as a Novel Tool for Engineering Functional Oxide Micro- and Nano-Architectures

Functional oxides have extensively been investigated as a promising class of materials in a broad range of innovative applications. Harnessing the novel properties of functional oxides in micro- to nano-scale applications hinges on establishing advanced fabrication and manufacturing techniques able to synthesize these materials in an accurate and reliable manner. Oxidative scanning probe lithography (o-SPL), an atomic force microscopy (AFM) technique based on anodic oxidation at the water meniscus formed at the tip/substrate contact, not only combines the advantages of both “top-down” and “bottom-up” fabrication approaches, but also offers the possibility of fabricating oxide nanomaterials with high patterning accuracy. While the use of self-assembled monolayers (SAMs) broadened the application of o-SPL, significant challenges have emerged owing to the relatively limited number of SAM/solid surface combinations that can be employed for o-SPL, which constrains the ability to control the chemistry and structure of oxides formed by o-SPL. Here, in this work, a new o-SPL technique that utilizes room-temperature ionic liquids (RTILs) as the functionalizing material to mediate the electrochemistry at AFM tip/substrate contacts is reported. The results show that the new IL-mediated o-SPL (IL-o-SPL) approach allows sub-100 nm oxide features to be patterned on a model solid surface, namely steel, with an initiation voltage as low as -2 V. Moreover, this approach enables high tunability of both the chemical state and morphology of the patterned iron oxide structures. Owing to the high chemical compatibility of ILs, which derives from the possibility of synthesizing ILs able to adsorb on a wide variety of solid surfaces, IL-o-SPL can be extended to other material surfaces and provide the opportunity to accurately tailor the chemistry, morphology, and electronic properties within nanoscale domains, thus opening new pathways to the development of novel micro- and nano-architectures for advanced integrated devices.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Effects of C/Mn Ratios on the Sorption and Oxidative Degradation of Small Organic Molecules on Mn-Oxides

We report manganese (Mn) oxides have a high surface area and redox potential that facilitate sorption and/or oxidation of organic carbon (OC), but their role in regulating soil C storage is relatively unexplored. Small OC compounds with distinct structures were reacted with Mn(III/IV)-oxides to investigate the effects of OC/Mn molar ratios on Mn–OC interaction mechanisms. Dissolved and solid-phase OC and Mn were measured to quantify the OC sorption to and/or the redox reaction with Mn-oxides. Mineral transformation was evaluated using X-ray diffraction and X-ray absorption spectroscopy. Higher OC/Mn ratios resulted in higher sorption and/or redox transformation; however, interaction mechanisms differed at low or high OC/Mn ratios for some OC. Citrate, pyruvate, ascorbate, and catechol induced Mn-oxide dissolution. The average oxidation state of Mn in the solid phase did not change during the reaction with citrate, suggesting ligand-promoted mineral dissolution, but decreased significantly during reactions with the other compounds, suggesting reductive dissolution mechanisms. Phthalate primarily sorbed on Mn-oxides with no detectable formation of redox products. Mn–OC interactions led primarily to C loss through OC oxidation into inorganic C, except phthalate, which was predominantly immobilized in the solid phase. Together, these results provided detailed fundamental insights into reactions happening at organo–mineral interfaces in soils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Contribution of Microorganisms with the Clade II Nitrous Oxide Reductase to Suppression of Surface Emissions of Nitrous Oxide

The sources and sinks of nitrous oxide, as control emissions to the atmosphere, are generally poorly constrained for most environmental systems. Initial depth-resolved analysis of nitrous oxide flux from observation wells and the proximal surface within a nitrate contaminated aquifer system revealed high subsurface production but little escape from the surface. Further, to better understand the environmental controls of production and emission at this site, we used a combination of isotopic, geochemical, and molecular analyses to show that chemodenitrification and bacterial denitrification are major sources of nitrous oxide in this subsurface, where low DO, low pH, and high nitrate are correlated with significant nitrous oxide production. Depth-resolved metagenomes showed that consumption of nitrous oxide near the surface was correlated with an enrichment of Clade II nitrous oxide reducers, consistent with a growing appreciation of their importance in controlling release of nitrous oxide to the atmosphere. Our work also provides evidence for the reduction of nitrous oxide at a pH of 4, well below the generally accepted limit of pH 5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Electrochemical Corrosion and Catalysis Dynamics of Tin Oxide during Water Oxidation

Metal oxide corrosion severely limits anodic electrocatalysis, particularly at high potentials in acidic environments, where degradation pathways remain poorly defined. This study establishes explicit connections between corrosion and electrocatalysis on tin oxide during water oxidation by examining the roles of lattice defects, reactive oxygen species, interfacial pH variations, and speciation of corroded tin in acid. We first demonstrate the presence of structural defects such as oxygen vacancies and substoichiometric Sn(II) species by integrating electron paramagnetic resonance spectroscopy, ultraviolet photoelectron spectroscopy, and Mott–Schottky analysis. Kohn–Sham density functional theory calculations reveal that explicit water structures thermodynamically stabilize reaction intermediates and lower reaction overpotentials. Moreover, we propose that water dissociation leads to hydrogen-bonding networks formed by H* and OH* intermediates, which may span the entire catalyst surface and decrease the interfacial pH to drive corrosion. In contrast, the electrochemical generation of reactive oxygen species is shown to play a minor role in catalyst corrosion during water oxidation using inductively coupled plasma mass spectrometry coupled with selective chemical scavengers. Square-wave voltammetry combined with rotating ring-disk electrodes is used to reveal that under open-circuit conditions, only Sn(IV) cations chemically dissolve from tin oxide, while both Sn(IV) and Sn(II) species electrochemically corrode during water oxidation. Our results unveil a dynamic and complicated interplay between corrosive and catalytic pathways on metal oxide electrocatalysts: a decrease in interfacial pH due to water oxidation exacerbates Sn(II)/Sn(IV) corrosion. Subsequently, the electrochemical corrosion of Sn(II)/Sn(IV) facilitates product formation from lattice oxygen, while the redeposition of corroded Sn(II) as Sn(IV) can enable oxygen exchange with water. By elucidating the roles of defects and interfacial chemistry, this work provides a roadmap for engineering improved electrocatalysts that balance activity and stability, a critical step toward scalable and durable energy technologies.

36 MATERIALS SCIENCE↗