Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Surfactant-Free Synthesis of Three-Dimensional Perovskite Titania-Based Micron-Scale Motifs Used as Catalytic Supports for the Methanol Oxidation Reaction

We synthesized and subsequently rationalized the formation of a series of 3D hierarchical metal oxide spherical motifs. Specifically, we varied the chemical composition within a family of ATiO 3 (wherein “A” = Ca, Sr, and Ba) perovskites, using a two-step, surfactant-free synthesis procedure to generate structures with average diameters of ~3 microns. In terms of demonstrating the practicality of these perovskite materials, we have explored their use as supports for the methanol oxidation reaction (MOR) as a function of their size, morphology, and chemical composition. The MOR activity of our target systems was found to increase with decreasing ionic radius of the “A” site cation, in order of Pt/CaTiO 3 (CTO) > Pt/SrTiO 3 (STO) > Pt/BaTiO 3 (BTO). With respect to morphology, we observed an MOR enhancement of our 3D spherical motifs, as compared with either ultra-small or cubic control samples. Moreover, the Pt/CTO sample yielded not only improved mass and specific activity values but also a greater stability and durability, as compared with both commercial TiO 2 nanoparticle standards and precursor TiO 2 templates.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Unraveling the adsorption-limited hydrogen oxidation reaction at palladium surface via in situ electron microscopy

Palladium (Pd) catalysts have been extensively studied for the direct synthesis of H 2 O through the hydrogen oxidation reaction at ambient conditions. This heterogeneous catalytic reaction not only holds considerable practical significance but also serves as a classical model for investigating fundamental mechanisms, including adsorption and reactions between adsorbates. Nonetheless, the governing mechanisms and kinetics of its intermediate reaction stages under varying gas conditions remain elusive. This is attributed to the intricate interplay between adsorption, atomic diffusion, and concurrent phase transformation of catalyst. Herein, the Pd-catalyzed, water-forming hydrogen oxidation is studied in situ, to investigate intermediate reaction stages via gas cell transmission electron microscopy. The dynamic behaviors of water generation, associated with reversible palladium hydride formation, are captured in real time with a nanoscale spatial resolution. Our findings suggest that the hydrogen oxidation rate catalyzed by Pd is significantly affected by the sequence in which gases are introduced. Through direct evidence of electron diffraction and density functional theory calculation, we demonstrate that the hydrogen oxidation rate is limited by precursors’ adsorption. These nanoscale insights help identify the optimal reaction conditions for Pd-catalyzed hydrogen oxidation, which has substantial implications for water production technologies. The developed understanding also advocates a broader exploration of analogous mechanisms in other metal-catalyzed reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Decarbonizing nitrogen fertilizer production via the electrochemical nitrogen oxidation reaction

Nitric acid is an important commodity chemical with extensive applications in both agricultural and industrial sectors. However, current production methods involve a combination of the Haber–Bosch and Ostwald processes, which are both energy and carbon emission intensive. The electrochemical nitrogen oxidation reaction (NOR) to produce nitric acid or nitrates shows great potential as an environmentally friendly method for producing fertilizers under mild conditions. The key to progress in this field lies in understanding the fundamental mechanistic insights and establishing robust experimental methods, which is essential for the efficient design and synthesis of electrocatalysts for NOR. Additionally, poor gas mass transport in conventional electrochemical reactors at present lead to lower NOR activity, thereby limiting the progress in this field. In this work, we present a synergistic computational and experimental approach to map out the potential chemical and electrochemical steps and determine the energetics on PtO 2 catalyst to gain mechanistic insights into NOR. Here, this study marks the first attempt to perform NOR in a vapor-fed reactor designed using advanced (additive) manufacturing. The vapor-fed reactor significantly improved the N 2 mass transport to the catalyst, allowing us to report the highest rate for nitrate production to date at 3.3 μmol cm -2 h -1 at 2.01 V vs RHE.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Engineering Active Surface Oxygen Sites of Cubic Perovskite Cobalt Oxides toward Catalytic Oxidation Reactions

Unraveling the role of surface oxygen sites in transition metal oxides during catalytic reactions has always been the focus of environmental and energy chemistry research. For this work, active surface oxygen sites of cubic perovskite cobalt oxide were engineered to comprehend their crucial role and catalytic mechanism at the molecular level. By removing those inert Sr/La–O termination layers, active oxygen sites were exposed on the Co terminated surface of Sr 0.6 La 0.4 CoO 3–δ that furnished the dominant catalytic process of CO oxidation via the Mars–van Krevelen (MvK) mechanism. The fabrication of five-coordinate cobalt ions and the enhanced covalency of Co–O bonds not only optimize the surface electronic structure of Co 3d–O 2p, but also supply active surface oxygen sites, which effectively oxidizes CO to CO 2 with a significantly improved oxidation performance and stability as evidenced by soft/hard XAS, XPS, and O 2 -TPD. Furthermore, online isotopic 18 O 2 mass spectrometry, in situ DRIFTS, and theoretical simulation demonstrate that the activity of surface oxygen sites enhances the kinetics of the MvK reaction, while unsaturated coordination sites from five-coordinate cobalt ions primarily contribute to the activated oxygen molecules and the stable catalytic cycle. The results reported here provide a deep insight into the comprehension of the relationships among active oxygen sites, surface electronic structure, and the reaction mechanism of transition metal oxides necessary for catalytic oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Phase-Dependent Structure Sensitivity of Pt/TiO 2 for CO Oxidation Reactions

Here, in this study, we investigated the effect of the support (rutile vs anatase titania) and of the Pt size of Pt nanoparticles and supports (rutile vs anatase) in the CO oxidation reaction. The steady-state specific activity of Pt/Rutile gradually increases with Pt dispersion, while that of Pt/Anatase is invariant with respect to Pt dispersion and is lower than the activity of Pt/Rutile. Our kinetic studies demonstrated that the reaction order for CO based on steady state is positive for sub-nm Pt clusters stabilized on rutile titania and it gradually changes to zero for large Pt clusters (>1 nm), as known in agreement with other studies for for supported Pt catalysts. In contrast, Pt/Anatase catalysts always show zero order dependence irrespective of Pt the size of Pt nanoparticles. Scanning transmission electron microscopy (STEM), X-ray photoelectron spectroscopy (XPS) and CO chemisorption results confirm that the notable sintering of sub-nm Pt clusters supported on anatase occurs with time-on-stream, which we correlate with might be related with the change of the CO reaction order from positive (order initially) tobut zero order for larger particles after sintered states. On the contrary, Pt/Rutile does not show serious sintering during the reaction, and it shows positive reaction order even during the steady state. Thus Pt/Rutile shows positive order at steady state and higher specific activity. Our study reveals the origin of profound catalytic differences between Pt nanoparticles supported on anatase and rutile titania and highlights better stability and activity of Pt/Rutile catalysts. than Pt/Anatase due to its better stability.

Kim, Haneul [Ulsan National Institute of Science a↗
DOE OSTI2020

Dual 3D Ceramic Textile Electrodes: Fast Kinetics for Carbon Oxidation Reaction and Oxygen Reduction Reaction in Direct Carbon Fuel Cells at Reduced Temperatures

Abstract Direct carbon fuel cells (DCFCs) are an efficient energy‐conversion technology capable of generating electricity with carbon‐dioxide‐capture chemistry with solid carbon as fuels. The efficiency and performance of DCFCs depend on the kinetics of the carbon oxidation reactions (COR) and the oxygen reduction reactions (ORR), each occurring at anode and cathode, respectively. The limited active sites paired with reduced temperatures greatly decrease the efficiency of the electrochemical reactions. Ultraporous dual‐3D ceramic textiles (dual‐3DCT) are integrated into electrolyte‐supported DCFCs to enhance charge and mass transfer at the electrodes. Improved COR at the anode is achieved by the synergy between the 3DCT NiO–Ce 0.8 Gd 0.2 O 1.95 (GDC) structure and optimal carbon fuel choice. In a comparative study, DCFCs using graphitic carbon (GC) as fuel show the best COR performance when compared to DCFCs utilizing alternative fuels such as carbon black (CB) and activated carbon (AC). The 3DCT Sm 0.5 Sr 0.5 CoO 3‐δ –GDC (SSC–GDC) composite cathode shows electrochemical performance superior to that of the conventional screen‐printed SSC–GDC. A peak power density of 392 mW cm −2 at 600 °C is obtained in a DCFC using the 3DCT‐anode/electrolyte/3DCT‐cathode configuration, an unprecedented value for any reported DCFC as of yet. This points toward promising applications of dual‐3DCT electrodes for reduced‐temperature DCFCs.

Bian, Wenjuan↗
DOE OSTI2025

Importance of hydrogen oxidation reaction current in quantifying hydrogen crossover in PEM water electrolyzers at high differential pressure

Understanding hydrogen permeation in proton exchange membrane water electrolyzers (PEMWEs) operating at high differential pressures (>25 bar) is critical towards developing effective gas recombination strategies that enable safe operation and high efficiency. Developing this understanding relies on accurate quantification of hydrogen crossover rates in water electrolyzers operating under such conditions. In this work, we show that PEMWEs operating at high differential pressures exhibit noticeable hydrogen oxidation reaction (HOR) currents. As the HOR consumes part of the permeated hydrogen at the anode, neglecting HOR currents leads to severe underestimation of the hydrogen crossover rate. We implemented a new method combining hydrogen oxidation current with online gas chromatography measurements to accurately quantify hydrogen crossover rates as a function of operating current density in PEMWEs operating at high differential pressures (10–30 bar g ).

25 ENERGY STORAGE↗
DOE OSTI2023

Fine-Tuning of Pt Dispersion on Al 2 O 3 and Understanding the Nature of Active Pt Sites for Efficient CO and NH 3 Oxidation Reactions

Fine-tuning the dispersion of active metal species on widely used supports is a research hotspot in the catalysis community, which is vital for achieving a balance between the atomic utilization efficiency and the intrinsic activity of active sites. In this work, using bayerite Al(OH) 3 as support directly or after precalcination at 200 or 550 °C, Pt/Al 2 O 3 catalysts with distinct Pt dispersions from single atoms to clusters (ca. 2 nm) were prepared and evaluated for CO and NH 3 removal. Richer surface hydroxyl groups on AlO x (OH) y support were proved to better facilitate the dispersion of Pt. However, Pt/Al 2 O 3 with relatively lower Pt dispersion could exhibit better activity in CO/NH 3 oxidation reactions. Further reaction mechanism study revealed that the Pt sites on Pt/Al 2 O 3 with lower Pt dispersion could be activated to Pt 0 species much easier under the CO oxidation condition, on which a higher CO adsorption capacity and more efficient O 2 activation were achieved simultaneously. Compared to Pt single atoms, PtO x clusters could also better activate NH 3 into –NH 2 and –HNO species. The higher CO adsorption capacity and the more efficient NH 3 /O 2 activation ability on Pt/Al 2 O 3 with relatively lower Pt dispersion well explained its higher CO/NH 3 oxidation activity. This study emphasizes the importance of avoiding a singular pursuit of single-atom catalyst synthesis and instead focusing on achieving the most effective Pt species on Al 2 O 3 support for targeted reactions. Finally, this approach avoids unnecessary limitations and enables a more practical and efficient strategy for Pt catalyst fabrication in emission control applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Overcoming fundamental challenges of the electrochemical nitrogen oxidation reaction

Nitric acid and nitrates play a crucial role in modern agriculture and medicine; however, their commercial production through the Haber–Bosch and Ostwald processes is energy-intensive and generates significant greenhouse gas emissions. Additionally, the rapidly growing global population is expected to significantly increase food demand in the coming decades. Therefore, there is a pressing need to explore sustainable alternatives for synthetic fertilizer production to meet increasing global crop demands while reducing the carbon footprint. The electrochemical nitrogen oxidation reaction (NOR) presents a viable alternative which produces nitrates using renewable electricity. However, NOR is still a nascent reaction that has not been studied extensively, and several key challenges must be addressed as the field develops. In this feature article review, we highlight the set of effective approaches that we have employed for studying this complex reaction and overcoming these challenges, as well as discuss future directions for advancing NOR technology.

Energy - Conversion↗
DOE OSTI2020

Real-time Atomic-scale Visualization of Reversible Copper Surface Activation during the CO Oxidation Reaction

Dynamic structural and chemical information of catalyst surface during a catalytic reaction is critical for deciphering the mechanisms governing the properties of catalysts. Transition-metal based catalysts have emerged as an important alternative to noble metal catalysts, but their catalytic mechanism remains largely elusive, complicated by dynamic structure and valence evolution. Herein, by using in situ aberration-corrected environmental transmission electron microscopy, we capture, for the first time at atomic level, the dynamic evolution of Cu surface during CO oxidation reaction. We discovered that, under reaction condition, the Cu surface is activated, typically involving 2-3 atomic layers with the formation of a reversible meta-stable phase that only exists during catalytic reactions. Further, we reveal the distinctive role of CO and O2 in the surface activation, featuring CO exposure to lead to surface roughening and consequently formation of low-coordinated Cu atoms, while O2 exposure to induce quasi-crystalline CuOx phase. Corrugated by DFT calculations, we rationalize crystalline CuOx reversibly transforms into the amorphous phase, acting as an active species to facilitate the interaction of gas reactants and catalyzing CO oxidation.

Luo, Langli↗
DOE OSTI2022

Heterogeneous M-N-C Catalysts for Aerobic Oxidation Reactions: Lessons from Oxygen Reduction Electrocatalysts

Nonprecious metal heterogeneous catalysts composed of first-row transition metals incorporated into nitrogen-doped carbon matrices (M-N-Cs) have been studied for decades as leading alternatives to Pt for the electrocatalytic O 2 reduction reaction (ORR). More recently, similar M-N-C catalysts have been shown to catalyze the aerobic oxidation of organic molecules. Here, this Focus Review highlights mechanistic similarities and distinctions between these two reaction classes and then surveys the aerobic oxidation reactions catalyzed by M-N-Cs. As the active-site structures and kinetic properties of M-N-C aerobic oxidation catalysts have not been extensively studied, the array of tools and methods used to characterize ORR catalysts are presented with the goal of supporting further advances in the field of aerobic oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stability of Mn-Doped TiO 2 Thin-Film Anodes during Water Oxidation Reactions

Incorporating manganese atoms into TiO 2 has been shown to improve its activity for water oxidation. However, its activity has been observed to steadily degrade under constant applied potential, especially at more oxidizing applied potentials. Here, the compositional profile and electrochemical stability of Mn-doped TiO 2 (Mn:TiO 2 ) thin-film electrodes precisely fabricated by atomic layer deposition (ALD) were evaluated to elucidate the mechanisms of electrode degradation. Although ALD enables the deposition of Mn dopants throughout the film thickness, only Mn within 1.5 nm of the surface was observed to be redox active. Annealing Mn:TiO 2 films in air leads to the diffusion of Mn toward the electrode surface and oxidation of the Mn and alters the redox behavior. Annealing endows greater stability to Mn redox behavior but does not fully stabilize the water oxidation current, suggesting that the two electrochemical processes are not precisely correlated. In situ inductively coupled plasma mass spectrometry reveals that Mn is lost from Mn:TiO 2 films at potentials greater than 1.8 V vs RHE. However, the initial Mn loss is equivalent to less than a single ALD layer of MnO x . Longer-term constant potential experiments suggest that Mn is lost from up to 1 nm of the electrode surface but that this loss may account for only a portion of the diminished water oxidation activity.

atomic layer deposition↗
DOE OSTI2021

Radiation-Induced Oxidation Reactions of 2-Selenouracil in Aqueous Solutions: Comparison with Sulfur Analog of Uracil

One-electron oxidation of 2-selenouracil (2-SeU) by hydroxyl (●OH) and azide (●N3) radicals leads to various primary reactive intermediates. Their optical absorption spectra and kinetic characteristics were studied by pulse radiolysis with UV-vis spectrophotometric and conductivity detection and by the density functional theory (DFT) method. The transient absorption spectra recorded in the reactions of ●OH with 2-SeU are dominated by an absorption band with an λmax = 440 nm, the intensity of which depends on the concentration of 2-SeU and pH. Based on the combination of conductometric and DFT studies, the transient absorption band observed both at low and high concentrations of 2-SeU was assigned to the dimeric 2c-3e Se-Se-bonded radical in neutral form (2●). The dimeric radical (2●) is formed in the reaction of a selenyl-type radical (6●) with 2-SeU, and both radicals are in equilibrium with Keq = 1.3 × 104 M−1 at pH 4 (below the pKa of 2-SeU). Similar equilibrium with Keq = 4.4 × 103 M−1 was determined for pH 10 (above the pKa of 2-SeU), which admittedly involves the same radical (6●) but with a dimeric 2c-3e Se-Se bonded radical in anionic form (2●−). In turn, at the lowest concentration of 2-SeU (0.05 mM) and pH 10, the transient absorption spectrum is dominated by an absorption band with an λmax = 390 nm, which was assigned to the ●OH adduct to the double bond at C5 carbon atom (3●) based on DFT calculations. Similar spectral and kinetic features were also observed during the ●N3-induced oxidation of 2-SeU. In principle, our results mostly revealed similarities in one-electron oxidation pathways of 2-SeU and 2-thiouracil (2-TU). The major difference concerns the stability of dimeric radicals with a 2c-3e chalcogen-chalcogen bond in favor of 2-SeU.

2-selenouracil↗
DOE OSTI2025

Vibrational Signatures of Unrealized Phosphorus Suboxide Intermediates in White Phosphorus Oxidation Reactions

White phosphorus ignition notoriously produces the phosphoric acid anhydride P 4 O 10 , yet the intermediate oxidation steps remain undetermined. Here, we report the first geometric and vibrational characterization of two P 4 O 2 isomers, P 3 OPO and P 3 PO 2 , and substantiate a previously proposed cyclic P 4 O 2 isomer. We formally assign the infrared bands observed by Andrews and Mielke at 898 and 891 cm −1 to the antisymmetric P− O−P vibrations of P 3 OPO species. Additional bands corresponding to terminal P=O and −PO 2 stretches of P 3 OPO and P 3 PO 2 discussed herein also went unrecognized due to the peculiar bonding of P 4 O 2 species compared to oxo-bridged P 4 O x (x = 3−6) species. Sequential addition of oxygen atoms to the P 4 tetrahedron appears to form P 3 OPO and P 3 PO 2 , while cyclic P 4 O 2 is formed from P 2 O dimerization. CCSD(T) geometries, CCSD(T) + MP2[δVPT2] fundamental frequencies, and enthalpies of formation extrapolated using focal-point analysis are reported. The predicted enthalpies of formation relative to tetrahedral P 4 plus 3 Σ g − O 2 for bent-P 3 OPO, extended-P 3 OPO, P 3 PO 2 , and cyclic-P 4 O 2 are −93, −88, −85, and −63 kcal mol −1 , respectively.

Molecular structure↗
DOE OSTI2024

Theoretical analysis of the OH-initiated atmospheric oxidation reactions of imidazole

Imidazoles are present in Earth's atmosphere in both the gas-phase and in aerosol particles, and have been implicated in the formation of brown carbon aerosols. The gas-phase oxidation of imidazole (C 3 N 2 H 4 ) by hydroxyl radicals has been shown to be preferentially initiated via OH-addition to position C5, producing the 5-hydroxyimidazolyl radical adduct. However, the fate of this adduct upon reaction with O 2 in the atmospheric gas-phase is currently unknown. We employed an automated approach to investigate the reaction mechanism and kinetics of imidazole's OH-initiated gas-phase oxidation, in the presence of O 2 and NO x . The explored mechanism included reactions available to first-generation RO 2 radicals, as well as alkoxyl radicals produced from RO 2 + NO reactions. Product distributions were obtained by assembling and solving a master equation, under conditions relevant to the Earth's atmosphere. Our calculations show a complex, branched reaction mechanism, which nevertheless converges to yield two major closed-shell products: 4H-imidazol-4-ol (4H-4ol) and N,N′-diformylformamidine (FMF). At 298 K and 1 atm, we estimate the yields of 4H-4ol and FMF from imidazole oxidation initiated via OH-addition to position C5 to be 34 : 66, 12 : 85 and 2 : 95 under 10 ppt, 100 ppt and 1 ppb of NO respectively. This work also revealed O 2 -migration pathways between the α-N-imino peroxyl radical isomers. This reaction channel is fast for the first-generation RO 2 radicals, and may be important during the atmospheric oxidation of other unsaturated organic nitrogen compounds as well.

Almeida, Thomas Golin↗
DOE OSTI2020

Fundamental Studies of Oxidation Reactions on Model Catalysts. Final report

This report covers the reporting period from 08/15/2003 to 08/31/2019. The research activities were focused on the oxidation of methane, nitric oxide, and propylene in addition to contributions on the kinetics, synthesis, theory and characterization of various catalytic systems. As described in the report, we were able to formulate hypotheses, construct specialized equipment and carry out experimental and theoretical work to test the hypotheses. Major advances were accomplished in the fundamental understanding of these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗