Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OER Catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Metal Foam Morphology Affects the Run to Run Reproducibility of OER Using Nickel Catalysts

Nickel (Ni) foam-based electrodes are excellent catalysts for the oxygen evolution reaction; however, we found that the random pore-size distribution of Ni foams contributes to a significant variability in electrochemically active surface area, compromising experimental reproducibility. We provide insights into quantifying this critical material property, verified by four electrochemical laboratories.

25 ENERGY STORAGE↗
DOE OSTI2026

Ultra-Low Amounts of Transition Metals in Carbon-Based Catalysts Improve Their Alkaline OER Performance: A Systematic Study

The pursuit of green hydrogen production highlights a persistent gap in electrocatalyst research: while academic efforts prioritize cost-efficiency via activity enhancement, industrial viability demands greater emphasis on electrochemical stability. Carbon-based electrocatalysts, particularly those incorporating transition metals, have shown promise in alkaline oxygen evolution (OER) due to their high activity, cost-efficiency, and resource-efficiency. However, these catalysts suffer from insufficient stability under oxidizing conditions compared to pure transition metal catalysts due to erosion of the carbon support resulting from carbon corrosion, among other degradation mechanisms. In this systematic study, the influence of ultra-low amounts (<1 wt %) of iron, cobalt, nickel, and their most common combinations on the stability of a hydrothermally derived, N-doped carbon support and the overall catalyst performance during alkaline OER is systematically explored. By identifying critical stability descriptors and correlating them with synthesis conditions and catalyst properties, primary and secondary corrosion pathways are unraveled. Subsequently, through careful adjustment of carbonization temperature and composition of incorporated transition metals, overall catalyst corrosion can be suppressed immensely. Especially, the inclusion of Ni and Fe is paramount for the formation of stable catalyst materials under laboratory conditions (10 mA/cm 2 in 0.1 M KOH), which is surprisingly unconstrained by the degree of graphitization of the carbon support. Mixing this electrochemically stable material with a graphitic carbon powder results in an excellent stability of over 400 h at 100 mA/cm 2 in 1 M KOH, implying great potential for the future improvement of carbon-based electrodes under oxidizing conditions toward industrial application.

N-doped carbon↗
DOE OSTI2025

A versatile and practical synthesis of oxygen evolution catalysts

State-of-the-art OER (oxygen evolution reaction) catalyst syntheses require the use of expensive metals (i.e. Ir) with complex and time-consuming synthetic routes, difficulty in control, and impractical yields. Although some reported catalysts show improved performance (i.e. activity, stability, lowering Ir content with Ru), their synthesis is costly and not viable for scale-up. Here we demonstrate a practical, reliable, and scalable one-pot synthesis method for OER catalysts based on borohydride reduction to quickly yield >100 mg of Ir, Ru, and IrRu nanoparticles (1.6 ± 0.2 nm) with outstanding batch-to-batch consistency. Both mono- and bi-metallic compositions exhibit a metal-core/metal-oxide-shell nanoparticle structure. We further demonstrate the versatility of this method by incorporating earth-abundant yttrium, resulting in a catalyst with improved precious metal utilization for OER. This method serves as a robust platform for generating ultrasmall (<2 nm) multi-metal particles useful for electrocatalysis research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electrolyte-Induced Restructuring of Acid-Stable Oxygen Evolution Catalysts

Crystalline metal oxide catalysts operating under oxygen evolution reaction (OER) conditions invariably restructure, resulting in active sites with hydroxo/oxo species in an amorphous environment. An increase in the population of terminal hydroxo/oxo species (i.e., edge sites) facilitates proton-coupled electron-transfer (PCET) kinetics for oxygen generation and thus improves catalyst competency. While amorphous films benefit from a greater density of active sites, they suffer from diminished charge transport as compared to that of extended crystalline lattices. Managing this amorphous–crystalline dichotomy is essential when designing OER catalysts, which we highlight with the examination of electrodeposited PbO x materials, which historically are very poor OER catalysts. Along these lines, the presence of phosphate during PbO x electrodeposition truncates the growth of an extended lattice owing to its strong bonding to oxide surfaces to afford an amorphous catalyst film (A-PbO x ) with significant charge-transfer resistance (138 ± 42 Ω) and poor OER kinetics (420 ± 105 mV dec –1 Tafel slope). Conversely, electrodeposition of Pb 2+ in the presence of less coordinating electrolytes such as nitrate affords crystalline β-PbO2 with improved charge-transfer resistance (42.6 ± 1.1 Ω), though still poor OER kinetics (134 ± 36 mV dec –1 Tafel slope). By operating amorphous A-PbOx in less coordinating electrolytes, however, a new partially crystalline material can be generated (μc-PbO x ) with further reduced charge-transfer resistance (33.0 ± 1.4 Ω) and improved OER kinetics (70 ± 15 mV dec –1 Tafel slope). The enhanced OER activity of μc-PbO x is the result of coupling the high edge-site population of an amorphous PbOx phase with crystalline-like charge transport properties. Finally, the ability to use an electrolyte to induce OER activity in an inactive amorphous form of PbO x highlights the benefits of optimizing the amorphous–crystalline phase compositions in the design of active OER catalysts.

catalysts↗
DOE OSTI2024

Spin-dependent electron transfer in electrochemically transparent van der Waals heterostructures for oxygen evolution reaction

Spin selective catalysis is an emerging approach for improving the thermodynamics and kinetics of reactions. The role of electron spins has been scarcely studied in catalytic reactions. One exception is the oxygen evolution reaction (OER) where strongly correlated metals and oxides are used as catalysts. In OER, spin alignment facilitates the transition of singlet state of the reactant to the triplet state of O 2 . However, the influence of strong correlations on spin exchange mechanism and spin selective thermodynamics of most catalytic reactions remain unclear. Here we decouple the strongly correlated catalyst from the electrolyte to study spin exchange in two-dimensional (2D) magnetic iron germanium telluride (FGT) heterostructure. We demonstrate that transmission of spin and electrochemical information between the catalyst and the reactant can occur through quantum exchange interaction despite the catalyst of FGT being completely encapsulated by graphene or hexagonal boron nitride (hBN). The strong correlations in FGT that lead to enhanced spin exchange in OER are observed in graphene or hBN layers with thicknesses of up to 6 nm. We demonstrate that spin alignment in FGT leads to a lowering of thermodynamic barrier for adsorption of hydroxide ion and electron transfer to the catalyst. This results in up to fivefold enhancement in OER performance and improved kinetics. Our results provide clear evidence that transmission of both quantum mechanical and electrochemical information through quantum spin exchange interaction in FGT leads to an enhancement in catalytic performance.

2D materials↗
DOE OSTI2026

Activity Convergence between Continuous- and Pulsed-Deposition NiFe Hydroxide Anodes in Liquid Alkaline Electrolyzers

Improving the activity of anodes for the alkaline oxygen evolution reaction (OER) is of interest because of the importance of the reaction in electrochemical technology. There is an abundance of studies which confirm that NiFe hydroxide, often prepared by electrodeposition, is the most active catalyst for the alkaline OER. This relatively high level of confidence in the optimal OER catalyst chemistry suggests that exploration of methods which improve on features besides the chemistry of the films, such as their microstructure, could access new heights of activity. In this study, the possible benefits of pulsed current deposition relative to the conventional continuous current approach to the deposition of NiFe hydroxides were investigated. Pulsed deposition densified the film surfaces by preventing metal ion depletion at the electrode surface during film formation. The Fe content, redox reversibility, and OER activity were higher for the pulsed deposition films relative to their continuous deposition counterparts. Though pulsed deposition imparted a higher OER performance of the films compared to continuous deposition at the three-electrode level, this improved performance was not retained during electrolyzer operation. Rather, a convergence of the cell performance is seen irrespective of the deposition approach. This phenomenon was attributed to the way electrolyzer conditionsrelatively high temperature, base concentration, and current densitycan drive alternate mechanisms for observed performance.

08 HYDROGEN↗
DOE OSTI2025

Supercritical preparation of doped (111) facetted nickel oxide for the oxygen evolution reaction

Green hydrogen is of great interest as a replacement for traditional fossil fuels in a variety of energy applications. However, due to the poor kinetics present in the oxygen evolution reaction (OER) half-reaction, nanostructured catalysts are needed to reduce the reaction overpotential. Nickel oxide has previously been shown to be a promising alternative to expensive Pt-group based catalysts for the OER in alkaline media. Herein, facetted NiO nanosheets have been doped with Fe, Mn, or Co to reduce its catalytic overpotential for the OER. A supercritical synthesis process was used to promote the mass transport of the reactants while preserving catalytic surface area. Microscopy, diffraction, spectroscopy, and adsorption techniques were used to understand the morphological changes resulting from the inclusion of each dopant, as well as characterize the surface chemistry presented by the doped (111) facet. The pH was found to affect the properties of mixing due to difference in hydrolysis rates and catalysis of the hydrolysis/condensation. The dopants exhibited distinct effects on OER activity: Mn increased the overpotential to 742 mV vs. RHE, while Co and Fe reduced it to 502 mV and 457 mV, respectively. In summary, a straightforward and novel synthesis method is presented to prepare doped NiO(111) nanosheets, and their surface characteristics are explored to understand their varied electrochemical performances.

08 HYDROGEN↗
DOE OSTI2025

Flux Synthesis of Lattice‐Engineered Rutile Solid Solutions for Acidic Oxygen Evolution

Developing efficient and stable electrocatalysts for the acidic oxygen evolution reaction (OER) is vital for advancing proton exchange membrane water electrolysis (PEMWE) technologies. Here, in this study, we report a flux synthesis of nitrogen-doped Ti–Ru rutile-type solid-solution oxides (M-TiRu 4 ) using molten NaNO 3 as the flux medium. The flux medium promotes the low-temperature conversion of TiN to rutile TiO 2 , while in situ-formed RuO 2 nanoparticles facilitate lattice templating and couple with interfacial ion migration, enabling the formation of homogeneous solid solutions with abundant lattice heterogeneity. Simultaneously, nitrogen atoms are stably incorporated into the lattice of solid solutions, inducing bandgap narrowing, which enhances electronic conductivity. The developed M-TiRu 4 catalyst exhibits exceptional acidic OER performance, delivering a low overpotential of 194 mV at 10 mA cm −2 , superior durability over 600 h, and a Ru mass activity 7.8 times that of commercial RuO 2 . At the device level, M-TiRu 4 enables PEMWE operation at 1.64 V @ 2 A cm −2 and maintains stable performance at 500 mA cm −2 for 200 h with a minimal degradation rate of 20 µV h −1 . This work demonstrates a robust approach for designing high-performance, durable acidic OER catalysts via synergistic lattice and electronic structure engineering, paving the way for next-generation water-splitting technologies.

Wang, Fan [Univ. of Tennessee, Knoxville, TN (Unit↗
DOE OSTI2024

Lanthanum-Promoted Electrocatalyst for the Oxygen Evolution Reaction: Unique Catalyst or Oxide Deconstruction?

A conventional performance metric for electrocatalysts that promote the oxygen evolution reaction (OER) is the current density at a given overpotential. However, the assumption that increased current density at lower overpotentials indicates superior catalyst design is precarious for OER catalysts in the working environment, as the crystalline lattice is prone to deconstruction and amorphization, thus greatly increasing the concentration of catalytic active sites. We show this to be the case for La 3+ incorporation into Co 3 O 4 . Powder X-ray diffraction (PXRD), Raman spectroscopy and extended X-ray absorption fine structure (EXAFS) reveal smaller domain sizes with decreased long-range order and increased amorphization for La-modified Co 3 O 4 . This lattice deconstruction is exacerbated under the conditions of OER as indicated by operando spectroscopies. The overpotential for OER decreases with increasing La 3+ concentration, with maximum activity achieved at 17% La incorporation. HRTEM images and electron diffraction patterns clearly show the formation of an amorphous overlayer during OER catalysis that is accelerated with La 3+ addition. O 1s XPS spectra after OER show the loss of lattice-oxide and an increase in peak intensities associated with hydroxylated or defective O-atom environments, consistent with Co(O) x (OH) y species in an amorphous overlayer. Furthermore, our results suggest that improved catalytic activity of oxides incorporated with La 3+ ions (and likely other metal ions) is due to an increase in the number of terminal octahedral Co(O) x (OH) y edge sites upon Co 3 O 4 lattice deconstruction, rather than enhanced intrinsic catalysis.

Catalysts↗
DOE OSTI2025

Enhancing durability and activity toward oxygen evolution reaction using single-site Re-doped NiFeO x catalysts at ampere-level

NiFeO x materials are known as among the most active catalysts toward oxygen evolution reaction (OER) for hydrogen generation in alkaline media. Nevertheless, the long-term durability of NiFeO x catalysts for OER is still too far to the industrial application. Herein, we prepared a NiFeReO x catalyst with single-site Re dopants and observed that the single-site Re dopants could significantly enhance the durability without compromising the activity. A cell voltage of 1.82 V without iR correction is noted at the current density of 3000 mA cm –2 in anion-exchange membrane water electrolyzer (AEMWE) with NiFeReO x catalyst, and a very small degradation is observed under 2000 and 1000 mA cm –2 , which remarkably outperforms the pristine NiFeO x . Additionally, the overpotential of 305 mV at 10 mA cm –2 is achieved with the NiFeReO x catalyst, which is lower than 50 mV compared with the pristine NiFeO x catalyst, together with a smaller Tafel slope of 54.3 mV dec -1 . The boosted OER durability and activity of the NiFeReO x catalyst could be attributed to the strong electron-withdrawing property of Re 7+ single atoms leading to the electronic structure optimization and stabilization of Ni/Fe active sites. Our insights propose a new path for designing NiFeO x catalysts with high durability and activity toward OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Development of Ternary Transition Metal Oxide Catalysts for Oxygen Evolution Reaction

Electrochemical water splitting, a promising method for green hydrogen production, is currently hindered by the high cost of precious-group metal (PGM)-based catalysts for the oxygen evolution reaction (OER). This study addresses this challenge by advancing the development of catalysts for OER, focusing on the development of high-performance PGM-free catalysts using nickel-iron-cobalt (NiFeCo)-based aerogels. The catalysts were synthesized via a sol-gel method and critical point drying to achieve a highly porous structure with an exceptionally high surface area. The designed catalyst structure provides an ideal platform for maximizing catalytic active sites and enhancing mass transport kinetics. Co has been systematically incorporated into the current PGM-free state-of-the-art, NiFeOx catalyst, and the metal ratios have been optimized. In addition to the experimental studies, density functional theory calculations were performed to study the material’s properties of this ternary catalyst and the effect of Co addition on enhancing OER catalysis.

Mizrahi, Michal [Bar-Ilan University, Ramat Gan, I↗
DOE OSTI2025

Synergy between Ni and Fe in NiFe aerogel oxygen evolution reaction catalyst: in situ 57 Fe Mössbauer and X-ray absorption spectroscopy studies

Anion-exchange-membrane water electrolyzers (AEMWE) for hydrogen production have attracted interest because cost-effective Ni- and Fe-based catalysts can be used for the oxygen evolution reaction (OER). Although NiFe oxide/hydroxide-based catalysts have been extensively studied, the role of Fe and its chemical state during OER are not well understood, with inconsistent findings across different studies. In this work, we combined in situ 57 Fe Mössbauer (MS) and X-ray absorption spectroscopy (XAS) to investigate the chemical states of Fe and Ni and elucidate their synergy during the OER. A NiFe (8 : 1 molar ratio) aerogel catalyst with high surface area, nano crystallinity, and high performance in AEMWE was used. We show that both Fe and Ni are oxidized during anodic polarization, and the potential for the change of oxidation states correlates well with the onset of the OER. In situ MS shows that 80–90% of Fe 3+ becomes tetravalent at OER potentials and remains so even after the potential is lowered below OER onset. Analysis of in situ XAS results suggests full Fe incorporation into Ni hydroxide. At OER potentials, lattice contraction indicates high oxidation states for both Ni and Fe. Upon returning to lower potentials, a portion of the Fe remains in its more oxidized form which corroborates the in situ MS findings. Results from this work affirm the importance of high-valent Ni and Fe in promoting the OER. Ni and Fe exhibit synergy during OER and the aerogel's unique nanomorphology leads to high OER activity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stable Metal–Organic Electrocatalysts for Anion-Exchange Membrane Water Electrolyzers by Defect Engineering

Developing efficient and durable catalysts for the alkaline oxygen evolution reaction (OER) is vital to achieving practical anion-exchange membrane water electrolyzers (AEMWE) for green hydrogen production. In this work, we break the activity-stability trade-off of electrocatalysis by defect engineering of Ni-based metal-organic electrocatalysts (Ni-benzene dicarboxylate; Ni-BDC) through coordinating ferrocenecarboxylates (Fc) to the metal sites. Experimental results collectively reveal that the defect MOF (Ni-BDC:Fc_5:1) exhibits a high OER turnover frequency of 0.75 O 2 s -1 at 300 mV overpotential. Operando Raman spectroscopy and isotope-labelling electrochemical mass spectrometry measurements indicate the structure of Ni-BDC:Fc_5:1 is also more stable in service than that of pure Ni-BDC. The high activity and stability could be attributed to the moderate defects (i.e., unsaturated Ni sites) in the structure that not only increase the intrinsic activity and stability of the local active environment by inhibiting lattice oxygen exchange, but also electrochemically activates the bulk of the catalysts by creating a porous network that facilitates internal H 2 O/OH - conduction with enhanced electronic conduction. Accordingly, an AEMWE employing Ni-BDC:Fc_5:1 as the OER catalyst delivers an industrial-level current density of 1 A cm -2 at 1.73 V cell and can be steadily operated for more than 120 hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Interfacial and Kinetic Origins of Voltage Loss in Neutral Zinc‐Air Batteries

Rechargeable zinc-air batteries are promising candidates for grid-scale energy storage; however, their practical deployment is limited by oxygen electrocatalysis inefficiencies and interfacial instabilities, particularly outside conventional alkaline electrolytes. Here, in this work, zinc-air batteries operating under neutral electrolyte conditions using ZnCl 2 soaked KC-PAA-PAM gel polymer electrolytes and electrochemically synthesized Ni/Fe layered double hydroxide electrocatalysts is investigated. Ni/Fe-LDH is intentionally employed as an OER-biased benchmark catalyst to diagnose electrolyte and interface driven limitations rather than as a bifunctional ORR/OER solution. Full cells exhibit highly stable cycling over hundreds of hours, yet operate at substantially suppressed charge and discharge voltages relative to the thermodynamic value. Electrochemical impedance analysis shows that ohmic losses contribute only minimally to this voltage suppression. Post-mortem X-ray photoelectron spectroscopy reveals metallic zinc accumulation on the air cathode and chloride-containing species on the anode, indicating parasitic interfacial processes. Synchrotron-based soft X-ray absorption spectroscopy confirms stable Ni 2+ and Fe 3+ oxidation states during cycling, consistent with OER-biased catalytic behavior, while neutral-electrolyte oxygen evolution measurements demonstrate strong electrolyte-induced suppression of oxygen kinetics. Together, these results show that electrolyte chemistry and cathode-side parasitic processes, rather than catalyst identity alone, dominate voltage losses in neutral zinc-air batteries, providing mechanistic insight into the fundamental challenges associated with neutral electrolyte operation.

Long duration energy storage↗
DOE OSTI2026

Unraveling the relationship between physicochemical properties of NiFeReOx catalysts and the correlated performance toward electrochemical oxygen evolution reaction

NiFeO x catalysts with single site Re dopants exhibit much higher active and stability toward electrochemical oxygen evolution reaction (OER) compared to traditional NiFeO x catalysts. Nevertheless, the relationship between physicochemical properties of NiFeReO x catalysts and the correlated performance toward OER is unclear, which hampers to enhance the OER performance further. Herein, we prepared a series of NiFeReO x catalysts with different physicochemical properties by treating them at different temperatures (up to 350 °C) and then evaluated their performance toward OER. Here, the results show that heat treatment can convert all metal oxidation states to higher values as well as specific surface areas, which are believed to favor real active site generation and OER activity enhancement. A decrease in activity is observed with the temperature increase at the low current range, and the smallest overpotential of 248 mV at 10 mA cm −2 is achieved with the pristine NiFeReO x catalyst. In contrast, the heat-treated samples possess smaller Tafel slopes and lower charge transfer resistance likely due to enhanced intrinsic activity (from higher oxidation states) and conductivity, which facilitate the reaction kinetics and surpass the pristine sample at a large current density. Additionally, the sample treated at 350 °C exhibits a higher activity at 1000 mA cm −2 (1.68 V vs. RHE compared to pristine sample of 1.92 V vs. RHE); however, it manifests a poorer stability compared to the pristine one due to the imbalance of reconstruction/transformations that occurred on the catalyst surface during OER operation. Our work unravels the relationship between physicochemical properties of NiFeReO x catalysts and the correlated OER performance and provides valuable insights for designing NiFeReO x catalysts with high activity and durability.

Catalyst reconstruction↗
DOE OSTI2024

High-Performance AEM LTE with Advanced Membranes, Ionomers and PGM-Free Electrodes

Alkaline low temperature electrolysis (LTE) systems enjoy several potential advantages over acid-based LTE systems including facile oxygen evolution reaction (OER) kinetics and electrodes that can use little to no platinum group metals (PGM). The polymer membranes and membrane electrode assembly (MEA) structures going into alkaline electrochemical systems have seen significant advances in recent years. The objective of this project is to combine state-of-the-art alkaline polymer electrolyzer components into one optimized membrane electrode assembly (MEA) system to achieve DOE low temperature electrolysis (LTE) goals. The benefit of individual component advances cannot be fully appreciated until all aspects and components of the MEA are working at an equally high level of performance. New electrode fabrication methods were developed where solvent cast catalyst/ionomer solutions were used in place of insoluble ionomers to significantly improve adhesion. The membranes were improved in terms of durability and mechanical properties. The OER and HER catalysts were improved and made more durable.

08 HYDROGEN↗
DOE OSTI2025

Enhancing Acidic Oxygen Evolution Activity by Controlling Oxidation State of Iridium

Iridium oxides with high oxidation states have been reported to be effective in enhancing the acidic oxygen evolution reaction (OER) performance. Herein, we develop ultrasmall IrO x nanoparticles (NPs) over titanium nitride (TiN), which undergoes surface oxidation under oxidative conditions to form oxygen-modified TiN (oxi-TiN), enabling the formation of highly oxidized Ir δ+ (δ > 4). This IrO x /oxi-TiN catalyst delivers higher Ir mass activity than commercial IrO 2 , while comparable stability is maintained. The superior OER activity of IrO x /oxi-TiN is further demonstrated in a proton exchange membrane water electrolyzer (PEMWE), requiring only 1.88 V to reach 3 A cm −2 , achieving the U.S. Department of Energy 2025 target (1.90 V at 3 A cm −2 ). In situ X-ray absorption spectroscopy (XAS) confirms that the superior OER activity of IrO x /oxi-TiN originates from highly oxidized Ir δ+ under OER conditions. Further, density functional theory (DFT) calculations reveal a general correlation between the oxidation state of Ir and OER overpotential. Specifically, the introduction of interfacial oxygen at the Ir/TiN interface increases the oxidation state of deposited Ir δ+ from δ < 4 to δ > 4, decreasing the OER overpotential. This study highlights the critical role of high oxidation states of Ir δ+ in enhancing OER activity, providing guidance for the development of advanced acidic OER catalysts.

In situ measurements↗
DOE OSTI2025

Enhancing Acidic Oxygen Evolution Activity by Controlling Oxidation State of Iridium

Iridium oxides with high oxidation states have been reported to be effective in enhancing the acidic oxygen evolution reaction (OER) performance. In this work, we develop ultrasmall IrO x nanoparticles (NPs) over titanium nitride (TiN), which undergoes surface oxidation under oxidative conditions to form oxygen‐modified TiN (oxi‐TiN), enabling the formation of highly oxidized Ir δ+ (δ > 4). This IrO x /oxi‐TiN catalyst delivers higher Ir mass activity than commercial IrO 2 , while comparable stability is maintained. The superior OER activity of IrO x /oxi‐TiN is further demonstrated in a proton exchange membrane water electrolyzer (PEMWE), requiring only 1.88 V to reach 3 A cm −2 , achieving the U.S. Department of Energy 2025 target (1.90 V at 3 A cm −2 ). In situ X‐ray absorption spectroscopy (XAS) confirms that the superior OER activity of IrO x /oxi‐TiN originates from highly oxidized Ir δ+ under OER conditions. Density functional theory (DFT) calculations reveal a general correlation between the oxidation state of Ir and OER overpotential. Specifically, the introduction of interfacial oxygen at the Ir/TiN interface increases the oxidation state of deposited Ir δ+ from δ < 4 to δ > 4, decreasing the OER overpotential. This study highlights the critical role of high oxidation states of Ir δ+ in enhancing OER activity, providing guidance for the development of advanced acidic OER catalysts.

58 GEOSCIENCES↗