Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Numerical modeling of impurity powder injection in W7-X

In this work, we present numerical simulation results of powder injection in W7-X using the EMC3-EIRENE and DIS codes. First, we model powder injection experiments performed in W7-X with the Probe Mounted Powder Injector. The simulation results qualitatively agree with visible imaging measurements. Secondly, we perform predictive simulations to guide the installation of an Impurity Powder Dropper in W7-X, allowing to choose in between several available non-vertical ports to maximize the amount of powder penetrating into the plasma, as well as the verticality of the port, to minimize sticking of the powders in the in-vessel stainless steel guiding tube. Port AEM41 is selected as the best candidate for IPD installation. The robustness of the simulation results has been verified for different plasma densities, powder materials and sizes, powder friction coefficient and changes in the plasma flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Numerical modeling and experimental validation of low velocity impact of woven GFRP/CFRP composites

Low-velocity impact of 2D woven glass fiber reinforced polymer (GFRP) and carbon fiber reinforced polymer (CFRP) composite laminates was studied experimentally and numerically. Hybrid laminates containing blocked layers of GFRP/CFRP/GFRP with all plies oriented at 0° were investigated. Relatively high impact energies were used to obtain full perforation of the laminate in a low-velocity impact setup. Numerical simulations were carried out using the in-house transient dynamics finite element code, Sierra/SM, developed at Sandia National Laboratories. A three-dimensional continuum damage model was used to describe the response of a woven composite ply. Two methods for handling delamination were considered and compared: (1) cohesive zone modeling and (2) continuum damage mechanics. The reduced model size achieved by omission of the cohesive zone elements produced acceptable results at reduced computational cost. Further, the comparison between different modeling techniques can be used to inform modeling decisions relevant to low velocity impact scenarios. The modeling was validated by comparing with the experimental results and showed good agreement in terms of predicted damage mechanisms and impactor velocity and force histories.

36 MATERIALS SCIENCE↗
DOE OSTI2026

An immersed interface method for microstructure-scale electrochemical battery models: numerical formulation and performance portable implementation

We present the numerical formulation, verification, and performance portable implementation of an immersed interface method for microstructure scale electrochemical modeling of batteries. The innovation in this approach is the resolution of chemical species and electrostatic potential discontinuities at active interfaces without the use of interface conforming unstructured grids. A unified formulation on Cartesian grids for all domains (electrodes and electrolyte) is used with interfacial flux conditions applied using volume fraction or “color” function gradients. We have developed one dimensional and two dimensional test cases with analytic solutions for electrochemical modeling using which we verified the consistency and accuracy of our scheme. Our solver is also validated against solutions from a macroscale model and an unstructured multi-subdomain solver for a full lithium ion cell. We then demonstrated the utility of our solver on an image-based complex battery electrode microstructure at high charging rate. Our technique also exhibits good scalability on distributed memory architectures using central processing units (CPU), with problem sizes up to 1.8 billion degrees of freedom and with 5400 ranks. Initial performance studies of our open-source performance portable solver showed about 70 times speed up using a graphics processing unit (GPU) compared to single compute core for a problem with 4 million cells.

25 ENERGY STORAGE↗
DOE OSTI2025

A Numerical Modeling Framework for Flocculation and Cohesive Sediment Transport in the Wave Bottom Boundary Layer

Flocculation, a critical process in coastal and estuarine systems, plays a significant role in sediment transport, nutrient cycling, and ecological health. This study develops a cohesive sediment transport modeling framework tailored to the wave bottom boundary layer under dilute and equilibrium conditions, explicitly incorporating flocculation effects via a Population Balance Equation (PBE). Using Direct Numerical Simulation, six baseline cases, each with a distinct sediment concentration profile resulting from a constant settling velocity and critical erosion shear stress, are generated to drive the PBE flocculation model for given floc yield strength and stickiness. Results reveal that flocculation significantly influences sediment concentration profiles promoting three distinct stages, well‐mixed, transition to lutocline, and well‐developed lutocline. At low concentrations with well‐mixed profiles, cohesive floc properties are less significant, and turbulence is a main flocculation driver. In contrast, as concentration increases, cohesive floc properties become crucial, facilitating lutocline formation. Here, the analysis also highlights limitations of depth‐averaged settling velocity as a parameterization. It is suitable for well‐mixed and transitional profiles but fails in well‐developed lutoclines, where empirical formulations that explicitly incorporate turbulent shear rate and sediment concentration better capture variability. This study underscores the necessity of incorporating flocculation effects into sediment transport models to enhance predictions of sediment dynamics in wave bottom boundary layers.

Penaloza‐Giraldo, Jorge A. [Oak Ridge National Lab↗
DOE OSTI2026

Estimating Residual Gas Beam Loss in the BNL AGS Booster:Model, Numerical Tools, and Implications for a Polarimeter Chamber

Beamloss from residual gas scattering is calculated for a storage ring of circumference C = 200m, covering a linear magnetic rigidity ramp from B ρ inj = 1.25Tm to B ρ ext = 9.50Tm over tramp = 1.00s. Three loss mechanisms are considered: nuclear inelastic reactions, single Coulomb scattering beyond the acceptance angle of the machine, and charge-state exchange for heavy ions. Calculations are performed for protons and Au 32+ ions, the latter being the charge state delivered by the EBIS pre-injector into the BNL AGS Booster. At a baseline vacuum of P 0 = 5 × 10 −11 mbar the integrated fractional beam loss over the full ramp is negligible for protons (< 0.001%) and 33.1% for Au 32+ . The impact of a 1m polarimeter section at elevated pressure P s = 5 × 10 −9 mbar is evaluated: the proton loss remains negligible, while the Au 32+ loss rises to 45.1%, establishing the vacuum requirement for the polarimeter chamber. In the present compact approximate model, Au 32+ losses are dominated by charge exchange at injection, while proton losses are dominated by single Coulomb scattering. The design, outgassing budget, pumping strategy, and commissioning sequence for a UHV polarimeter chamber housing silicon detectors and ASICs are described in detail.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Predicting microstructurally sensitive fatigue‐crack path in WE43 magnesium using high‐fidelity numerical modeling and three‐dimensional experimental characterization

Abstract Microstructurally small fatigue‐crack growth in polycrystalline materials is highly three‐dimensional due to sensitivity to local microstructural features (e.g., grains). One requirement for modeling microstructurally sensitive crack propagation is establishing the criteria that govern crack evolution, including crack deflection. Here, a high‐fidelity finite‐element modeling framework is used to assess the performance and validity of various crack‐growth criteria, including slip‐based metrics (e.g., fatigue‐indicator parameters), as potential criteria for predicting three‐dimensional crack paths in polycrystalline materials. The modeling framework represents cracks as geometrically explicit discontinuities and involves voxel‐based remeshing, mesh‐gradation control, and a crystal‐plasticity constitutive model. The predictions are compared to experimental measurements of WE43 magnesium samples subject to fatigue loading, for which three‐dimensional grain structures and fatigue‐crack surfaces were measured post‐mortem using near‐field high‐energy x‐ray diffraction microscopy and x‐ray computed tomography. Findings from this work are expected to improve the predictive capabilities of simulations involving microstructurally small fatigue‐crack growth in polycrystalline materials.

Engineering↗
DOE OSTI2024

Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC) (Cooperative Research and Development Final Report, CRADA Number: CRD-22-22968)

This work generated a first-of-its-kind automated workflow to couple time-domain simulations of wave energy converters written in one software language with a set of design generation and evaluation scripts written in another software language. This automated workflow used an existing optimization package to analyze the sensitivity of different design parameters on the power output of a specific WEC, iProTech’s Pitching Inertial Pump (PIP). Geometric, inertial, and power take-off variables were all varied and optimized to find values that produced the highest amount of power generated over varying wave conditions. The findings on these parameter sensitivity studies are used to inform future design iterations of the PIP WEC. Including more design variables in the optimizations will only increase computational run time and further software development is needed to analyze a larger optimization.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

High-Speed and High-Quality Field Welding Repair Based on Advanced Non-Destructive Evaluation and Numerical Modeling

Creep strength-enhanced ferritic (CSEF) steels such as Grade 91 (9Cr-1Mo-V) and Grade 92 (Fe-9Cr-2W-0.5Mo) steels are widely used in the fossil-fuel-fired and nuclear power plants. The weld integrity of these steels is crucial for power plants' safe and reliable operations. Due to harsh service conditions, the steel weld can become susceptible to environmental degradation. Field welding repair is used to restore the degraded weld’s performance where a controlled temper-bead welding technique is commonly used to temper the freshly formed martensite during welding. However, knowledge of weld repairability is limited and experimental trial and error optimization to achieve desired microstructure and joint properties is expensive and time-consuming. Many existing computational models, e.g., finite element models, are limited to solving heat conduction equation and ignoring convective heat transfer due to molten metal flow. These models can result in over-prediction of peak temperatures of weld pool and heat-affected zone (HAZ), which in turn can affect the accuracy of tempering prediction. Moreover, these finite element models require an input of the deposit profiles in advance and thus limits the usability of these models. Here, a molten pool-based, multi-pass multi-layer model has been developed based on computational fluid dynamics (CFD) approach with the Volume of Fluid (VOF) method. The model calculates the bead formation, thereby eliminating the need for pre-determined bead profiles required by finite element models. For computational efficiency, a coordinate system attached to the moving heat source is utilized. A subroutine is developed to convert the temperature profiles in the reference frame stationary to the heat source to that stationary to the workpiece. The converted thermal cycles are then imported into a microstructure model to compute the tempering kinetics and resultant hardness using a Johnson-Mehl-Avrami-Kolmogorov (JMAK), and modified Grange-Baughman parameter. The modeling approach is first developed and validated on single- and multi-pass deposition of stainless steel filler metal onto a SA-533 high strength steel substrate. The models are then applied to a multi-pass V-groove repair weld of Grade 91 steel plate as well as directed energy deposition of Grade 92 steel. Non-destructive characterization of microstructures was performed on Grade 91 and 92 steel welds. Two welding processes, cold metal transfer (CMT) and flux-cored arc welding (FCAW), were investigated for the Grade 91 steel weld samples. For the Grade 92 weld samples, three different heat inputs (low, medium, and high) of gas tungsten arc welding (GTAW) were utilized to replicate traditional field welding processes. The non-destructive evaluation (NDE) method used for this research was immersion ultrasonic testing (UT) using a micro-resolution ultrasonic imaging methodology specifically designed to operate in the through-transmission configuration operating at 20 MHz of frequency. The system used a focused ultrasonic beam spot size diameter between 250-300 μm, and a 6 μm laser vibrometer spot size for detection, to produce highly defined images with longitudinal and mode-converted shear waves. From the micro-resolution ultrasonic C-scan images, three microstructural regions, i.e., weld metal (WM), HAZ, and base metal (BM), were clearly identifiable. Various levels of ultrasonic amplitudes distributed over the three regions were correlated with electron beam backscattered diffraction (EBSD) images using grain size, grain boundaries, and dislocation densities. The results showed that areas with relatively higher ultrasonic amplitude levels were associated with smaller grains and higher dislocation densities, while areas with lower amplitude levels were associated with larger grains and lower dislocation densities. In addition, ultrasonic velocity data obtained across the three different weld microstructural regions of Grade 91 test samples were correlated with optical metallographic images and hardness measurements. The results showed distinctive decreases in ultrasonic velocity and hardness over the HAZ region, where weld failures often occur during service.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Numerical Model for the Dynamics of Pickup Ions Outside the Heliopause and IBEX “Ribbon” Observation

The leading mechanism for the origin of the Interstellar Boundary Explorer (IBEX) “ribbon” of enhanced energetic neutral atoms (ENAs) from the outer heliosphere is the so-called secondary ENA process. In this mechanism, neutralized ions escape the heliosphere, and after several times of charge exchange collision,s some propagate back toward Earth in directions nearly perpendicular to the local interstellar magnetic field. However, the physical processes governing the distribution of the pickup ions (PUIs) outside the heliopause are still unclear. In this study, we build a new global model of the IBEX ribbon, where a key component is to calculate the dynamics of the PUIs outside the heliopause by solving the gyrophase-averaged focused transport equations on top of the background magnetohydrodynamic-kinetic model for the heliosphere-interstellar medium interaction. We discuss how the properties of the simulated ribbon change with different scattering parameters and show simulation results of the ENA sky maps, ribbon centers, ribbon profiles at several azimuthal slices, the ribbon ENA source region, and the velocity distribution of PUIs in the ENA source region for different scattering frequencies. Our results show that the model can provide reasonable ribbon sky maps comparable to the observed ribbon when the PUI mean free path is on the order of several thousand astronomical units.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Numerical Modeling of a Two-Stage Ocean Current Turbine

The Equinox Ocean Turbines (EQOT) current energy converter has a unique design with power generation in two small-diameter turbines attached to the tips of a large-diameter passive rotor. This configuration offers some key advantages for capturing ocean currents. With no centrally placed generator, almost no reaction torque is required at the nacelle of the main large-diameter rotor, and the small-diameter tip turbine generators operate at a higher speed and lower torque. The physics that determine the performance and loads on the turbine are also unique. The interactions of the flow field between the two stages and the general architecture of the system cannot be captured with traditional mid-fidelity modeling tools. For design iterations and large sets of load cases, it is important to have mid-fidelity models that can capture the important phenomenon with enough accuracy to identify global trends. This work uses a limited set of high-fidelity computational fluid dynamics (CFD) simulations to help inform the selection of and construction of a custom mid-fidelity model. Mid-fidelity modeling approaches were verified by comparing key turbine performance quantities to those found with the CFD model. Hydrodynamic interactions of the two-stage rotor were identified through high-fidelity CFD modeling. This highlighted the impact of the main rotor tip vortex and wake on the secondary rotor apparent inflow. This results in a relative flow rotation and sharp deficit, that change the optimal secondary rotor rotation speed and adds unsteadiness to the blade loading respectively. Multiple mid-fidelity approaches were evaluated for their ability to capture these effects. A simple approximation of the combined-stage performance based on single-stage BEM provides a reasonable rough prediction, especially near the peak TSR values, with some larger discrepancy at higher TSRs. Predicting the combined-stage performance based on single-stage CFD data improves this prediction across the TSR range. Although the combined-stage modeling in OLAF was not successful in this stage of the project, it showed promise as a mid-fidelity method, assuming the parameters can be tuned to account for the significant differences in time and length scales between the main and secondary rotors. This may be addressed through code changes in future work. A significant finding from the OLAF work was the agreement between the vortex core radius values found independently via a parameter space search and via CFD. The technique of using single-stage secondary rotor BEM, with a custom inflow taken from single-stage main rotor CFD or OLAF, provides an efficient method to capture one-way coupled flow interactions. This method provided generally good predictions of the impact of the flow rotation on the secondary rotor but struggled to accurately predict the peaks of the unsteady load progression. Future work could include some superposition of a tuned main rotor trailing edge viscous wake into the custom inflow to better predict this interaction.

16 TIDAL AND WAVE POWER↗
DOE OSTI2026

Influence of Numerical Modeling Approaches on Damped Behavior of Flexible Beams: Preprint

Composites structures are widely used in aerospace and wind energy applications for their excellent stiffness and strength-to-weight properties. In these structures, structural damping is critical to predict vibration amplitudes, performance, and reliability. Structural damping is of particular interest for slender wings, rotorcraft blades, and wind turbine blades that can exhibit complex vibration phenomena and are frequently modeled with geometrically exact beam theory (GEBT). Standard approaches of stiffness proportional or modal damping merely assign user defined values and cannot predict damping behavior. This work compares stiffness proportional damping to two more advanced damping approaches: modal strain energy and Prony series. The modal strain energy approach uses a sectional analysis tool to calculate the beam stiffness and postprocess internal stresses from GEBT simulations. The internal stresses are then used to calculate modal damping factors. The Prony series is implemented within GEBT to directly model viscoelastic behavior of the composites. These approaches are compared by modeling the evolution of the damping factors of a realistic flexible wind turbine blade with varying rotational speed. Discrepancies between the approaches suggest areas for future modeling development, but differences in nonlinear damping values are less than current uncertainties about the magnitude of structural damping.

17 WIND ENERGY↗
DOE OSTI2026

Improving High Resolution Offshore Wind Resource Assessments and Forecasts using Observations in the MA/RI Lease Areas

The third Wind Forecast Improvement Project (WFIP3) sought to improve understanding of the physical phenomena in the atmosphere and ocean that dictate the structure and variability of wind and thermodynamic fields within the Marine Atmospheric Boundary Layer (MABL). WFIP3 conducted a comprehensive 18-month observational study over the Northeast U.S. outer continental shelf, a high use coastal zone, using a 3-D multiscale sensor array to highly resolve the temporal, vertical, and horizontal structure of the coupled atmospheric and oceanic boundary layers. Multiple land-based study sites adjacent to the coastal ocean observed surface meteorology and vertical profiles of atmospheric properties via passive infrared and microwave radiometers, active lidars and radars, and radiosondes. At sea, an array of surface flux buoys and two vertical profiling lidar buoys observed both atmospheric and oceanic properties, augmented by land-based oceanographic radar systems and routine ship-based surveys. Intensive observations of the MABL over the ocean was done from an air-sea interaction flux tower and extended deployments of a large barge platform. WFIP3 focused on mesoscale and sub-mesoscale flows -- including sea breezes, low-level jets, low-level clouds, and coastal storms -- and the ability of advanced numerical model parameterizations to represent them within fully coupled oceanic and atmospheric modeling systems and foundational weather forecast models. Numerous critical forecasting phenomena were observed, however the project was terminated prior to the completion of the field observational period and the analysis period.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Code-to-code comparison between FLASH and HYDRA in gas-puff Z-pinch modeling

The numerical modeling of gas-puff Z pinches involves the nonlinear coupling of a broad range of complex, multi-physics phenomena that makes such simulations challenging. The challenge is further compounded by nonlinear instabilities that can impact the dynamics of imploding gas-puff Z pinches, such as the magneto Rayleigh–Taylor instability (MRTI). If the growth rate and amplitude of the latter is comparable to the relevant timescales and properties of the imploding plasma, the MRTI can dramatically alter implosion dynamics, dictate pinch stability, and govern the plasma properties achievable in pulsed-power-driven laboratory experiments. National Laboratories and academic teams have developed numerical tools that can accurately model Z-pinch configurations and provide reliable design capabilities that can guide experimental choices and assist in interpreting experimental results. Most such tools, however, are not broadly available. Here, we present newly developed Z-pinch simulation capabilities of the publicly available FLASH code, applied in the study of MRTI growth and dynamical effects in gas-puff implosions. To verify the new implementations, we perform a comparison of FLASH gas-puff implosion simulations with previously published calculations with the HYDRA code from Lawrence Livermore National Laboratory, which have been validated with experimental data from the CESZAR pulsed-power driver at the University of California, San Diego. The experiments involved double- and triple-nozzle configurations, in an experimental attempt to stabilize the pinch to the MRTI. The code-to-code comparison shows similar results between the FLASH and HYDRA simulations, supporting the use of FLASH in the modeling of future gas-puff Z-pinch experiments at CESZAR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

System and method for wave prediction

A method and system for prediction of wave properties include collecting time-series data streams from one or more wave measurement devices and processing the data to identify data parameters to establish boundary conditions of a numerical model. The numerical model may be used to compute a predicted wave field of time-series data for a variety of wave properties at a target location.

Previsic, Mirko↗
DOE OSTI2024

A numerical study of process complexity in permafrost dominated regions

Numerical modeling of permafrost dynamics requires adequate representation of atmospheric and surface processes, a reasonable parameter estimation strategy, and site-specific model development. The three main research objectives of the study are: (i) to propose a novel methodology that determines the required level of surface process complexity of permafrost models by conducting parameter sensitivity and calibration, (ii) to design and compare three numerical models of increasing surface process complexity, and (iii) to calibrate and validate the numerical models at the Yakou catchment on the Qinghai-Tibet Plateau as an exemplary study site. The calibration was carried out by coupling the Advanced Terrestrial Simulator (numerical model) and PEST (calibration tool). Simulation results showed that (i) A simple numerical model that considers only subsurface processes can simulate active layer development with the same accuracy as other more complex models that include surface processes. (ii) Peat and mineral soil layer permeability, Van Genuchten alpha, and porosity are highly sensitive. (iii) Liquid precipitation aids in increasing the rate of permafrost degradation. (iv) Deposition of snow insulated the subsurface during the thaw initiation period. We have developed and released an integrated code that couples the numerical software ATS to the calibration software PEST. The numerical model can be further used to determine the impacts of climate change on permafrost degradation.

Calibration↗