Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NbC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Progress Report on Performance of A709 and G91 Steels in Sodium

Specimens in six different processing and heat treatment conditions of A709 H58776 were exposed to sodium at 550, 600, and 650°C, respectively for various exposure times. G91 base metal was tested in sodium at 550, 600, and 650°C, and G91 weldment at 550 and 600°C, respectively. Parallel thermal aging experiments were conducted on G91 and A709 to obtain thermal aging data for comparison with sodium exposure results to separate the thermal and sodium effects. The corrosion data obtained on A709 steel continue to show low corrosion rates, which indicate good compatibility of A709 with sodium when oxygen content is controlled. G91 has also shown acceptable corrosion rates over the temperature range of 550-650°C in sodium. Thermal aging or sodium exposures reduced the tensile strength, uniform elongation, and total elongation for A709 ESR, AOD specimens. These specimens consistently showed higher yield stress and tensile strength and lower uniform and total elongations after sodium exposure than after thermal aging under comparable testing conditions. It implies that there was an additional effect of sodium exposure that gave rise to an increase in tensile strength of A709. Dynamic strain aginginduced flow serrations were completely removed by either thermal aging or sodium exposure at 650°C, which imply that carbon or nitrogen in solution was removed from the solution and formed precipitates during aging or sodium exposures. The tensile data ruled out the possibility of decarburization under the sodium exposure conditions. The HOMO specimens behaved somewhat differently from the ESR and AOD specimens in sodium. While thermal aging and sodium exposures at 550 and 600°C decreased the yield stress and the ultimate tensile strength of G91, there was virtually no additional effect resulting from sodium exposures at these two temperatures. In contrast, sodium exposures at 650°C had a drastic effect on the yield stress and the ultimate tensile strength of G91. It is suggested that G91 experienced decarburization in the 650°C sodium environments. Carbon concentrations in sodium in the SMT-1 and SMT-2 loops were determined by a foil equilibration method. The estimated carbon concentration was in the range of 0.8-1.2 ppm in the SMT-1 loop and 0.3-0.7 ppm in the SMT-2 loop. The carbon activity in sodium in the SMT-2 loop was estimated to be 0.03-0.08 at 600°C, and 0.08-0.2 at 550°C. The carbon activity in sodium at 650°C in the SMT-1 loop was 0.04-0.07. Equilibrium simulation of the carburization – decarburization processes was conducted for A709 and G91 steels exposed in sodium environments at temperatures of 550-700°C. The carbon activity-concentration relationship for G91 was re-evaluated by considering four phases in G91, i.e. bcc ferrite, M 23 C 6 , NbC and VC carbides. It was found that the carburization-decarburization process in G91 steel was dictated by M 23 C 6 carbides at high carbon activities, while NbC carbides dominated the process at low carbon activities. Formation of NbC increases the decarburization resistance of G91 steel. It remains to be understood whether the decarburization resistance provided by MC carbides in G91 can be maintained during long-term operations of SFRs. The carbon concentration-activity relationship for A709 was calculated based on the equilibrium of fcc-austenite and M 23 C 6 carbide phase. The calculations showed that A709 decarburizes at 650°C in the SMT-1 loop environments, which is different from the experimental findings. The carbon concentration-activity relationship in A709 was further evaluated by considering four phases, including fcc-austenite, M 23 C 6 , NbC, and TiC carbide phases. TiC is the most stable carbides among the three carbide phases. The carburization-decarburization process in A709 is dictated by M 23 C 6 carbides at high carbon activities and by TiC at low carbon activities. Formation of TiC increases the decarburization resistance of A709 steel. Because of the complexity of the precipitation process in A709 during sodium exposures, detailed characterization of precipitates in sodium-exposed specimens and improved thermodynamic models are needed to understand the carburization-decarburization behavior of A709. Kinetic analysis of carbon transfer will be investigated for G91 and A709 in future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Effect of thermal treatments on electrochemical behavior of binder jetted 17-4 PH stainless steel

Binder jetted 17–4 PH stainless steel was post-processed to relate heat treatment, microstructure, and corrosion in 3.5 wt% NaCl. Specimens were sintered at 1380 or 1400 °C, solution-annealed at 1055 °C for 1 h, and aged at 482 °C for 1 h. Here, as-sintered parts showed α′-martensitic matrix with a δ-ferrite network and Cu-rich precipitates in ferrite; inclusions (MnS, NbC) promoted localized attack. solutionizing redistributed elements and reduced ferrite, while aging generated coherent Cu nano-precipitates. Corrosion resistance was highly sensitive to post-processing in which aged specimens exhibited the lowest corrosion current density and formed a thicker, stable Cr 2 O 3 -rich passive film, whereas sintered specimens degraded most. Pitting potential depended on sintering temperature and microstructure, with 1400 °C sintering yielding more positive pitting potentials and the best overall performance after aging. Although the 1400-solutionized condition showed a relatively noble pitting response versus 1380-solutionized, it displayed unstable corrosion kinetics attributed to an imperfect passive film linked to higher NbC density. XPS depth profiles corroborated these trends, showing thicker, more continuous Cr 2 O 3 in aged states and discontinuous/thinning oxides in less resistant conditions. Practically, high-temperature sintering (∼1400 °C) followed by solutionizing and aging is recommended, with further gains expected from reducing NbC/MnS populations and porosity via powder and process control.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carburization and decarburization behavior of Grade 91 ferritic-martensitic steel in liquid sodium environments

Here, this paper presents a study of carbon transfer and its effect on microstructure and tensile properties of Grade 91 (G91) ferritic-martensitic steel exposed to sodium at 550–650 °C. Sodium exposure tests were conducted in Argonne's forced convection sodium loops up to exposure times of ~40,000 h. Thermal aging study of G91 steel was conducted in parallel to isolate the thermal aging effect from the sodium effect. It was found that sodium exposures at 650 °C dissolved M 23 C 6 carbides, eliminated the martensite subgrain structure resulting in excessive grain growth and reduced the tensile strength by >50%, while sodium exposures at 550 and 600 °C had an insignificant effect on its microstructure and tensile properties. These effects were attributed to the carburization/decarburization process of G91 steel in sodium environments. Carbon concentrations in sodium were determined by a foil equilibration method. The estimated carbon concentration was in the range of 0.8–1.2 ppm in the SMT-1 loop and 0.3–0.7 ppm in the SMT-2 loop. Thermodynamic analysis of the carburization – decarburization process was conducted for G91 steels exposed in sodium environments. The carbon activity-concentration relationship for G91 was evaluated by considering four phases in G91, i.e. bcc ferrite, M 23 C 6 , NbC and VC carbides. It was found that the carburization-decarburization process in G91 steel was dictated by M 23 C 6 carbides at high carbon activities, while NbC and VC carbides dominated the process at low carbon activities. The calculated carburization-decarburization boundary showed that G91 would undergo decarburization at 650 °C and carburization at 550 °C in the sodium loop environments, which was consistent with our experimental observations. This experimental and theoretical analysis provided a basis for predicting the effect of carbon transfer on the integrity of reactor components in sodium environments and for the design of new alloys used in sodium-cooled fast reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microstructural evolution and phase stability in Nb-containing interstitial Fe-Mn-Co-Cr-C high-entropy alloys: An in-situ synchrotron X-ray diffraction study during laser melting

The influence of Nb on phase stability and microstructural evolution in an interstitial Fe-Mn-Co-Cr-C high-entropy alloy was investigated using in-situ synchrotron X-ray diffraction (SXRD) during laser melting. Scheil-Gulliver simulations predict the formation of σ and γ-f.c.c. phases in all three alloys, along with NbC in Nb-containing compositions. SXRD confirmed the presence of most predicted phases, but the σ phase was absent. Nb promotes crystallite refinement and increases dislocation density, though excessive additions reduce refinement efficiency due to solubility limits and secondary phase formation. Furthermore, Nb addition also enhances ε-h.c.p. phase formation by reducing stacking fault energy through NbC-induced carbon depletion. Analysis of intensity peak evolution reveals that Nb alters preferred grain orientations, reducing {111} γ intensity while enhancing {220} γ , leading to a more isotropic grain distribution. Overall, Nb plays a key role in phase selection, microstructure refinement, and preferred orientation evolution, allowing the tailored microstructure of high-entropy alloys via rapid solidification.

Interstitial high entropy alloys↗
DOE OSTI2021

Performance of Carbide Alloy Compounds in Carbon Doped MoNbTaW

In this work, the performance of the carbon doped compositionally complex alloy (CCA) MoNbTaW was studied under ambient and high pressure and high temperature conditions. TaC and NbC carbides were formed when a large concentration of carbon was introduced while synthesizing the MoNbTaW alloy. Both FCC carbides and BCC CCA phases were detected in the sample compound at room temperature, in which the BCC phase was believed to have only refractory elements MoNbTaW while FCC carbide came from TaC and NbC. Carbides in the carbon doped MoNbTaW alloy were very stable since no phase transition was obtained even under 3.1 GPa and 870 °C by employing the resistor-heating diamond anvil cell (DAC) synchrotron X-ray diffraction technique. Via in situ examination, this study confirms the stability of carbides and MoNbTaW in the carbon doped CCA even under high pressure and high temperature.

36 MATERIALS SCIENCE↗
NASA NTRS1970

Ultra high vacuum adhesion testing of NERVA engine materials

The primary objective of this research program was to determine the effects of surface cleaning and deliberate gaseous contamination on the adhesion behavior of selected candidate materials for use in the NERVA nuclear rocket engine program. Using a torsion balance technique, the relationship between the normal compressive load applied to crossed rod samples and the resultant contact resistance was used to ascertain the extent of adhesion under each set of experimental conditions. In addition to an evaluation of the static adhesion behavior of selected materials combinations, the experimental apparatus was modified to permit a similar investigation relating to the effects of specific tangential displacements of the sample wires, i.e., their sliding friction behavior. During the course of this subcontract, the materials combinations 440 C vs. 440 C. pyrographite vs ZTA graphite, Nbc (graphite) vs. Nbc (graphite), and Electrolize Inconel 718 vs. Au electroplated 302 S/S were evaluated.

Source record↗
NASA NTRS1996

An Analysis of MSFC Public Affairs Television and Target Audiences with Suggestions for Future Growth and Directions

Because of profound changes in government and the space program, this may be an ideal time to evaluate MSFC's Public Affairs television efforts. The changes are continued downsizing of government programs; reduction in research and development; changes in the space program from periodic manned launches to a full-time presence in space with Space Station; and greater emphasis on science and communicating science information. At the same time that NASA is undergoing change, the media and society are also undergoing substantial upheaval. Twenty-five years ago, the three main over-the-air television networks (ABC, CBS and NBC) had a 93 share of the television audience. We now have four popular over-the-air networks (ABC, CBS, NBC and Fox) who maintain a 52 percent share of the television audience. Technological development, competition, and changing consumer tastes have created specialized media and audiences. This media fragmentation is part of a normal maturation cycle of use or adoption. While phases in the cycle vary in length due to many factors, the cycle has been consistent and reflects patterns of adoption. The cycle is: (1) Elite Media usage, (2) Popular or Mass Media usage, and (3) Specialized Media usage. Another factor that affects the media development and adoption cycle is the creation of new and competing mass and personal mediums. While television remains the dominant and most popular mass medium, it is declining and we see (via cable television) specialized networks catering to small audience segments. Because of changing technology and consumer behavior, we may not see a dominant mass media like television again.

Smeyak, Gerald P.↗
NASA NTRS1999

Modeling Mesoscale Eddies in the North Atlantic Ocean

Ocean modeling plays an important role in understanding the current climatic conditions and predicting the future climate change. Modeling the ocean at eddy-permitting and/or eddy resolving resolutions (1/3 degree or higher) has a two-fold objective. One part is to represent the ocean as realistically as possible, because mesoscale eddies have an impact on the large-scale circulation. The second objective is to learn how to represent effects of mesoscale eddies without explicitly resolving them. This is particularly important for climate models which cannot be run at eddy-resolving resolutions because of the computational constraints. At JPL, a 1/6 degree latitude by 1/6 degree longitude with 37 vertical levels Atlantic Ocean model has been developed. The model is based on the Parallel Ocean Program (POP) developed at Los Alamos National Laboratory (LANL). Using the 256-processor Cray T3D, we have conducted a 40-year integration of this Atlantic eddy-resolving ocean model. A regional analysis demonstrate that many observed features associated with the Caribbean Sea eddies can be realistically simulated by this model. Analysis of this Atlantic eddy-resolving ocean model further suggests that these Caribbean Sea eddies are connected with eddies formed outside the Caribbean Sea at the confluence of the North Brazil Current (NBC) and the North Equatorial Countercurrent. The diagram of the model simulated surface current shows that the Caribbean eddies ultimately originate in the NBC retroflection region, traveling more than a year from the North Brazil coast through the Lesser Antilles into the Caribbean Sea and eventually into the Gulf of Mexico. Additional information is contained in the original.

Chao, Yi↗
NASA NTRS2002

Research and Project Activities in Astrophysics

In collaboration with G Micela, S. Sciortino, and others at the Osservatorio Astronomico di Palermo G. S. Valens, we conducted studies of X-ray emission from normal stars, primarily via observations of several open star clusters and star forming regions (viz. the Pleiades, NBC 2516, NBC 2264, and the Orion Nebula Cluster). Our work was based on combined data from several X-ray observatories, Einstein, ROSAT, XMM-Newton and Chandra, as well as ground-based optical and radio data. Preliminary results were presented at several meetings: HEAD/AAS, November, 1997 a 195th AAS Meeting, January 2000 a Three Islands Conference, April 2000 a X-ray Astronomy 2000, September 2000 a 197th AAS Meeting, January 2001 Two Years of Science with Chandra, September 2001

Harnden, F. Rick, Jr.↗
NASA NTRSDate not supplied

Refractory Carbides for Hydrogen Erosion Resistance in Carbon Tubes for Nuclear Thermal Propulsion

As crewed travel becomes more common to the Moon and beyond, space nuclear propulsion-based craft offer reduced travel times and double the specific impulse compared to conventional chemical rockets. The nuclear core and its integral hydrogen propellant channels will require advanced refractory carbide coatings over a carbon/carbon substrate for hydrogen resistance. Using ab initio and other computational techniques, we studied select (Zr/Ta/Nb)C mixed carbide systems for erosion resistance and hydrogen diffusion using realistic levels of carbon vacancies and experimentally obtainable stoichiometries. Various contributions to the formation and hydrogen erosion free energies were calculated, including configurational, electronic, and vibrational terms. Our calculations indicate that ZrC is less likely to lose carbon than NbC or TaC, providing an explanation for heritage NERVA data on ZrC and NbC mass loss performance. Additionally, binary mixtures show compositions that are more stable than their end-member counterparts. Hydrogen diffusion in stoichiometric ZrC was found to be slightly higher than previously theorized, with the caveat that hydrogen saturation of carbon vacancies will hinder further hydrogen diffusion through the bulk, while hydrogen diffusion in ZrNbC is slightly enhanced over ZrC. And finally, we show that as carbon is depleted, the deformation mechanism of ZrC changes from brittle to ductile. Though many questions still remain as to the bulk performance of these materials, these trends and results are important in terms of materials selection efforts for hydrogen-resistant coatings on carbon/carbon substrates.

William C Tucker↗
NASA NTRSDate not supplied

Refractory Carbides for Hydrogen Erosion Resistance in Carbon Tubes for Nuclear Thermal Propulsion

As crewed travel becomes more common to the Moon and beyond, space nuclear propulsion-based craft offer reduced travel times and double the specific impulse compared to conventional chemical rockets. The nuclear core and its integral hydrogen propellant channels will require advanced refractory carbide coatings over a carbon/carbon substrate for hydrogen resistance. Using \textit{ab initio} and other computational techniques, we studied select (Zr/Ta/Nb)C mixed carbide systems for erosion resistance and hydrogen diffusion using realistic levels of carbon vacancies and experimentally obtainable stoichiometries. Various contributions to the formation and hydrogen erosion free energies were calculated, including configurational, electronic, and vibrational terms. Our calculations indicate that ZrC is less likely to lose carbon than NbC or TaC, providing an explanation for heritage NERVA data on ZrC and NbC mass loss performance. Additionally, binary mixtures show compositions that are more stable than their end-member counterparts. Hydrogen diffusion in stoichiometric ZrC was found to be slightly higher than previously theorized, with the caveat that hydrogen saturation of carbon vacancies will hinder further hydrogen diffusion through the bulk, while hydrogen diffusion in ZrNbC is slightly enhanced over ZrC. And finally, we show that as carbon is depleted, the deformation mechanism of ZrC changes from brittle to ductile. Though many questions still remain as to the bulk performance of these materials, these trends and results are important in terms of materials selection efforts for hydrogen-resistant coatings on carbon/carbon substrates.

William C. Tucker↗
NASA NTRSDate not supplied

Refractory Carbides for Hydrogen Erosion Resistance in Carbon Tubes for Nuclear Thermal Propulsion

As crewed travel becomes more common to the Moon and beyond, space nuclear propulsion-based craft offer reduced travel times and double the specific impulse compared to conventional chemical rockets. The nuclear core and its integral hydrogen propellant channels will require advanced refractory carbide coatings over a carbon/carbon substrate for hydrogen resistance. Using ab initio and other computational techniques, we studied select (Zr/Ta/Nb)C mixed carbide systems for erosion resistance and hydrogen diffusion using realistic levels of carbon vacancies and experimentally obtainable stoichiometries. Various contributions to the formation and hydrogen erosion free energies were calculated, including configurational, electronic, and vibrational terms. Our calculations indicate that ZrC is less likely to lose carbon than NbC or TaC, providing an explanation for heritage NERVA data on ZrC and NbC mass loss performance. Additionally, binary mixtures show compositions that are more stable than their end-member counterparts. Hydrogen diffusion in stoichiometric ZrC was found to be slightly higher than previously theorized, with the caveat that hydrogen saturation of carbon vacancies will hinder further hydrogen diffusion through the bulk, while hydrogen diffusion in ZrNbC is slightly enhanced over ZrC. And finally, we show that as carbon is depleted, the deformation mechanism of ZrC changes from brittle to ductile. Though many questions still remain as to the bulk performance of these materials, these trends and results are important in terms of materials selection efforts for hydrogen-resistant coatings on carbon/carbon substrates.

William C Tucker↗
DOE OSTI2020

Electrical and Elastic Properties of Individual Single-Layer Nb 4 C 3 T x MXene Flakes

2D carbides and nitrides (MXenes) are widely recognized for their exceptional promise for numerous applications. However, physical property measurements of their individual monolayers remain very limited despite their importance for revealing the intrinsic physical properties of MXenes. The first mechanical and electrical measurements of individual single-layer flakes of Nb 4 C 3 T x MXene, which are prepared via an improved synthetic method are reported. Characterization of field-effect transistor devices based on individual single-layer Nb 4 C 3 T x flakes shows an electrical conductivity of 1024 ± 165 S cm -1 , which is two orders of magnitude higher than the previously reported values for bulk Nb 4 C 3 T x assemblies, and an electron mobility of 0.41 ± 0.27 cm 2 V -1 s -1 . Atomic force microscopy nanoindentation measurements of monolayer Nb 4 C 3 T x membranes yield an effective Young's modulus of 386 ± 13 GPa, assuming a membrane thickness of 1.26 nm. This is the highest value reported for nanoindentation measurements of solution-processable 2D materials, revealing the potential of Nb 4 C 3 T x as a primary component for various mechanical applications. In conclusion, the agreement between the mechanical properties of 2D Nb 4 C 3 T x MXene and cubic NbC suggests that the extensive experimental data on bulk carbides could be useful for identifying new MXenes with improved functional characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The compositional optimization and secondary phases evaluation regarding the creep resistance in Grade 91 steel through the CALPHAD approach

The critical secondary phases along with critical temperatures in regard to the creep resistance of Grade 91 steel alloy were evaluated in order to optimize the composition of the alloy to improve the creep resistance. The critical temperatures which are highlighted in this paper are Ac1 (the threshold temperature in which austinite begins to form), and Ac3 (the threshold temperature at which ferrite is fully transformed into austenite). Furthermore, optimization was presented through various Cr, V, Nb, and N concentrations in Gr.91 in relation to these critical temperatures and the mole fraction of M 23 C 6 , MX, and Z-Phase as critical secondary phases. Here, the results indicate that increasing V and Nb will increase MX stability, whereas decreasing Cr and N lead to a decrease in Z-Phase and M 23 C 6 stability, which may lead to an increased creep resistance of the material. Upon further analyzing the V, Nb, and N concentrations in Gr.91, results indicate that increasing Nb content in the steel can lead to an increased stability of Nb-rich MX2 carbide which can be used to replace Z-Phase in low N steels. Simulation results indicate that elimination of N with a dramatic increase in Nb concentrations result in the stability increase of only M 23 C 6 and MX2 phases at temperature regions between 600 °C and 1370 °C and a complete removal of Z-Phase precipitation. Overall, with the elimination of N, which destabilizes Z-Phase precipitation, and an increase in Nb for NbC carbide stability, a possible solution to increasing both long-term and short-term creep resistance for Gr.91 can be achieved, though further optimization and creep experiments need to be conducted for final conclusions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Identification of Active Metal Carbide and Nitride Catalytic Facets for Hydrodeoxygenation Reactions

The catalytic hydrodeoxygenation (HDO) reaction is of considerable interest for biomass conversion to valuable chemicals and fuels, where one of the critical bottlenecks is the lack of cost-effective and efficient catalysts. To discover cost-efficient catalysts for the HDO reaction, we employed a density functional theory-based hierarchical catalyst design strategy based on catalytic descriptors, reaction energy profiles, and microkinetic modeling (MKM). We focused on the carbide and nitride catalyst space, for which we calculated 121 catalyst surfaces of Mo 2 C, MoC, Mo 2 N, W 2 C, NbC, VC, VN, and NbN catalysts. Based on the computed surface energies, reaction energies of oxygen removal, carbon binding strength, and the surface area of nanoparticles, the likely active facets are the Mo 2 C(111), MoC(011), VN(100), Mo 2 N(001), Mo 2 N(011), and Mo 2 N(100) surfaces. Further, detailed energy profiles were obtained, and MKM was performed for a model reaction (glycolaldehyde + 2H 2 . ethylene + 2H 2 O) on the Mo 2 C(111), VN(100), and MoC(100) surfaces. Based on the computed volcano map obtained from MKM, the predicted active facets for this HDO reaction are the Mo 2 C(111), MoC(011), VN(011), Mo 2 N(001), Mo 2 N(011), and Mo 2 N(100) surfaces. Additionally, none of the carbide and nitride catalyst surfaces are located in the optimal catalytic activity part. Therefore, it is essential to modify the catalyst via adding dopants or alloying to improve the catalytic activity. Catalytic modifications that can destabilize the surface adsorption of O*/H 2 O* and decrease the energy barriers of O-H bond formation are recommended to facilitate the HDO on the carbide and nitride catalysts. These a priori investigations provide guidelines for future low-cost HDO catalyst development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synthesis and Structural Investigation of Rigid Naphthyridine-Bis(carbene) for Trigonal Planar Coordination of Coinage Metals

Coinage metal complexes, particularly Cu(I) and Au(I), supported by N-heterocyclic carbenes are of broad interest in organometallic synthesis, catalysis, and luminescent materials. The d 10 coinage metals can adopt varied linear, trigonal planar, and tetrahedral geometries. However, two-coordinate, linear Cu(I) and Au(I) complexes supported by sterically demanding monodentate or chelating carbenes are generally observed. In most cases, chelating ligands generate multinuclear species with linear geometries at the corresponding Cu(I) centers rather than mononuclear complexes. In this report, we synthesized two bis(carbene) ligands anchored by a flexible bipyridine and a rigid naphthyridine backbone with tunable proximal and distal steric properties at the wingtips to examine the influence of backbone rigidity and directionality of carbene donors on the formation of trigonal planar coinage metal species. Here, the bipyridine-bis(carbene) (ImPy) 2 ligand exclusively stabilizes dinuclear chloride complexes of Cu(I) and Ag(I), whereas the naphthyridine-bis(carbene) (NBC) stabilizes mononuclear, trigonal planar chloride complexes of Cu(I) and Ag(I) and a dinuclear chloride Au(I) complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Phase controlled synthesis of transition metal carbide nanocrystals by ultrafast flash Joule heating

Nanoscale carbides enhance ultra-strong ceramics and show activity as high-performance catalysts. Traditional lengthy carburization methods for carbide syntheses usually result in coked surface, large particle size, and uncontrolled phase. Here, a flash Joule heating process is developed for ultrafast synthesis of carbide nanocrystals within 1 s. Various interstitial transition metal carbides (TiC, ZrC, HfC, VC, NbC, TaC, Cr 2 C 3 , MoC, and W 2 C) and covalent carbides (B 4 C and SiC) are produced using low-cost precursors. By controlling pulse voltages, phase-pure molybdenum carbides including β-Mo 2 C and metastable α-MoC 1-x and η-MoC 1-x are selectively synthesized, demonstrating the excellent phase engineering ability of the flash Joule heating by broadly tunable energy input that can exceed 3000 K coupled with kinetically controlled ultrafast cooling (>10 4 K s –1 ). Theoretical calculation reveals carbon vacancies as the driving factor for topotactic transition of carbide phases. The phase-dependent hydrogen evolution capability of molybdenum carbides is investigated with β-Mo 2 C showing the best performance.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Predicted Heat Flux Performance of Actively Cooled Tungsten-Armored Graphitic Foam Monoblocks

Tungsten (W)–armored graphitic foam monoblocks were developed for applications requiring high-Z plasma-facing material in long-pulse fusion experiments and ultimately deuterium-tritium fusion reactors. The monoblocks are an integrated material system combining the advantages of a chemical vapor deposited (CVD) W coating with a high-conductivity graphitic foam. The W is a high-melting-point, high-Z material with low tritium retention. The graphitic foam coupled to a swirl tube serves as a high-thermal-conductivity heat sink that cannot melt, although it can sublime at much higher temperatures than copper melts. Together, they comprise a robust plasma-facing component (PFC) weighing roughly 5% of an all-W component or 17% of a traditional W-coated copper heat sink.A single-channel mock-up consisting of four graphitic foam monoblocks equipped with a water-cooled swirl tube was fabricated for eventual testing in the 60-kW, EB-60, rastered electron beam at the Applied Research Laboratory of The Pennsylvania State University. Two monoblocks have a thin 50-μm-thick coating of pure W chemically vapor deposited over NbC and pure Nb interlayers. Two others have a 2-mm-thick pure W coating CVD on graphitic monoblocks using the same interlayers. The mock-up will be cooled with available 10 m/s, 0.7 MPa water with a 22°C inlet temperature and subjected to varying uniform heat loads up to 20 MW/m 2 . It is equipped with type-K thermocouples at various depths, and calibrated infrared thermography and spot pyrometry will be used to characterize the heated surface. Real-time water calorimetry will be used to ascertain the absorbed steady-state power and infer the heat flux during testing. Since testing cannot be done under prototypic divertor flow conditions, it is necessary to predict the thermal response of this novel PFC system and investigate the power sharing between radiation and convection at divertor heat flux levels and its inherent ability to avoid critical heat flux. Results are reported for predictions obtained from computational fluid dynamics models up to 30 MW/m 2 of steady-state uniform heat flux. Leading-edge heat loads of 30 MW/m 2 on a 2-mm-wide side strip were also investigated to ascertain if coating delamination is likely.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗