Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NOMOGRAPH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Design parameters of toroidal and bobbin magnetics

The adoption by NASA of the metric system for dimensioning to replace the long-used English units imposes a requirement on the U.S. transformer designer to convert from the familiar units to the less familiar metric equivalents. Material is presented to assist in that transition in the field of transformer design and fabrication. The conversion data makes it possible for the designer to obtain a fast and close approximation of significant parameters such as size, weight, and temperature rise. Nomographs are included to provide a close approximation for breadboarding purposes. For greater convenience, derivations of some of the parameters are also presented.

Mclyman, W. T.↗
NASA NTRS1974

Simplified cut core inductor design

Although filter inductor designers have routinely tended to specify molypermalloy powder cores for use in high frequency power converters and pulse-width modulated switching regulators, there are sigificant advantages in specifying C cores and cut toroids fabricated from grain oriented silicon steels which should not be overlooked. Such steel cores can develop flux densities of 1.6 tesla, with useful linearity to 1.2 tesla, whereas molypermalloy cores carrying d.c. current have useful flux density capabilities only to about 0.3 tesla. The use of silicon steel cores thus makes it possible to design more compact cores, and therefore inductors of reduced volume, or conversely to provide greater load capacity in inductors of a given volume. Information is available which makes it possible to obtain quick and close approximations of significant parameters such as size, weight and temperature rise for silicon steel cores for breadboarding. Graphs, nomographs and tables are presented for this purpose, but more complete mathematical derivations of some of the important parameters are also included for a more rigorous treatment.

Mclyman, W. T.↗
NASA NTRS1974

Design parameters for toroidal and bobbin magnetics

The adoption by NASA of the metric system for dimensioning to replace long-used English units imposes a requirement on the U.S. transformer designer to convert from the familiar units to the less familiar metric equivalents. Material is presented to assist in that transition in the field of transformer design and fabrication. The conversion data makes it possible for the designer to obtain a fast and close approximation of significant parameters such as size, weight, and temperature rise. Nomographs are included to provide a close approximation for breadboarding purposes. For greater convenience, derivations of some of the parameters are also presented.

Mclyman, W. T.↗
NASA NTRS1974

Uncertainties in derived temperature-height profiles

Nomographs were developed for relating uncertainty in temperature T to uncertainty in the observed height profiles of both pressure p and density rho. The relative uncertainty delta T/T is seen to depend not only upon the relative uncertainties delta P/P or delta rho/rho, and to a small extent upon the value of T or H, but primarily upon the sampling-height increment Delta h, the height increment between successive observations of p or delta. For a fixed value of delta p/p, the value of delta T/T varies inversely with Delta h. No limit exists in the fineness of usable height resolution of T which may be derived from densities, while a fine height resolution in pressure-height data leads to temperatures with unacceptably large uncertainties.

Minzner, R. A.↗
NASA NTRS1975

In situ spectroradiometric quantification of ERTS data

The author has identified the following significant results. Analyses of ERTS-1 photographic data were made to quantitatively relate ground reflectance measurements to photometric characteristics of the images. Digital image processing of photographic data resulted in a nomograph to correct for atmospheric effects over arid terrain. Optimum processing techniques to derive maximum geologic information from desert areas were established. Additive color techniques to provide quantitative measurements of surface water between different orbits were developed which were accepted as the standard flood mapping techniques using ERTS.

Yost, E. F.↗
NASA NTRS1976

Cryogenic storage tank thermal analysis

Parametric study discusses relationship between cryogenic boil-off and factors such as tank size, insulation thickness and performance, structural-support heat leaks and use of vapor-cooled shields. Data presented as series of nomographs and curves.

Wright, J. P.↗
NASA NTRS1977

Simplified cut-core inductor

Technical memorandum describes design of linear reactor fabricated from grain-oriented steel. It includes design charts and nomographs and illustrates design of grain-oriented inductor via seven-step example. Typical values of core inductance, operating frequency, and coil current (dc and ac) are given.

Mclyman, W. T.↗
NASA NTRS1978

Free-air content in fluid systems

Nomograph used with compressibility tester automatically finds amount of free-air within closed fluid system. Device reduces time required for task and reduces likelihood of error.

Gum, G. R.↗
NASA NTRS1978

Optimized solar module design

The minimum cost per unit of power output from flat plate solar modules can most likely be achieved through efficient packaging of higher efficiency solar cells. This paper outlines a module optimization method which is broadly applicable, and illustrates the potential results achievable from a specific high efficiency tandem junction (TJ) cell. A mathematical model is used to assess the impact of various factors influencing the encapsulated cell and packing efficiency. The optimization of the packing efficiency is demonstrated. The effect of encapsulated cell and packing efficiency on the module add-on cost is shown in a nomograph form.

Santala, T.↗
NASA NTRS1979

Determination of noise equivalent reflectance for a multispectral scanner: A scanner sensitivity study

The methods used to calculate the sensitivity parameter noise equivalent reflectance of a remote-sensing scanner are explored, and the results are compared with values measured over calibrated test sites. Data were acquired on four occasions covering a span of 4 years and providing various atmospheric conditions. One of the calculated values was based on assumed atmospheric conditions, whereas two others were based on atmospheric models. Results indicate that the assumed atmospheric conditions provide useful answers adequate for many purposes. A nomograph was developed to indicate sensitivity variations due to geographic location, time of day, and season.

Gibbons, D. E.↗
NASA NTRS1981

Predicting the impacts of new technology aircraft on international air transportation demand

International air transportation to and from the United States was analyzed. Long term and short term effects and causes of travel are described. The applicability of econometric methods to forecast passenger travel is discussed. A nomograph is developed which shows the interaction of economic growth, airline yields, and quality of service in producing international traffic.

Ausrotas, R. A.↗
NASA NTRS1982

A comparison of potential electric propulsion systems for orbit transfer

Electric propulsion concepts are compared on the basis of trip time for the low earth orbit (LEO) to geosynchronous earth orbit (GEO) mission. Resistojet, arcjet, magnetoplasmadynamic (MPD), pulsed inductive, and ion engine thruster concepts are included. The optimum (minimum trip time) value of specific impulse is found to be dependent upon the specific mission and system being considered. As expected, the devices which can deliver good efficiency at low specific impulses promise the fastest trip times. The solution for trip time and propellant mass for the constant power, continuous low acceleration orbit transfer problem (one way and round trip) is presented in nomograph form. The influences of mission Delta V, thruster efficiency, specific impulse, power, power and propulsion system mass, and payload mass are clearly illustrated.

Jones, R. M.↗
NASA NTRS1988

Ice/frost/debris assessment for space shuttle mission STS-26R

An Ice/Frost/Debris Assessment was conducted for Space Shuttle Mission STS-26R. Debris inspections of the flight elements and launch pad are performed before and after launch. Ice/Frost conditions are assessed by use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by an on-pad visual inspection. High speed photography is viewed after launch to identify ice/debris sources and evaluate potential vehicle damage. The Ice/Frost/Debris conditions of Mission 26R and their effect on the Space Shuttle Program is documented.

Stevenson, Charles G.↗
NASA NTRS1989

Ice/frost/debris assessment for space shuttle mission STS-27R, December 2, 1988

An Ice/Frost/Debris assessment was conducted for Space Shuttle Mission STS-27R. Debris inspections of the flight elements and launch pad are performed before and after launch. Ice/frost conditions are assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by an on-pad visual inspection. High speed photography is viewed after launch to identify ice/debris sources and evaluate potential vehicle damage. The Ice/Frost/Debris conditions of Mission STS-27R and their effect on the Space Shuttle Program are documented.

Katnik, Gregory N.↗
NASA NTRS1989

KSC ice/frost/debris assessment for Space Shuttle Mission STS-30R

An ice/frost/debris assessment was conducted for Space Shuttle Mission STS-30R. Debris inspections of the flight elements and launch pad are performed before and after launch. Ice/frost conditions on the external tank are assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by an on-pad visual inspection. High speed photography is analyzed after launch to identify ice/debris sources and evaluate potential vehicle damage. The ice/frost/debris conditions of Mission STS-30R and their overall effect on the Space Shuttle Program is documented.

Stevenson, Charles G.↗
NASA NTRS1989

KSC ice/frost/debris assessment for space shuttle mission STS-29R

An ice/frost/debris assessment was conducted for Space Shuttle Mission STS-29R. Debris inspections of the flight elements and launch pad are performed before and after launch. Ice/frost conditions on the external tank are assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by an on-pad visual inspection. High speed photography is analyzed after launch to identify ice/debris sources and evaluate potential vehicle damage. The ice/frost/debris conditions of Mission STS-29R and their effect on the Space Shuttle Program are documented.

Stevenson, Charles G.↗
NASA NTRS1989

Debris/ice/TPS assessment and photographic analysis for Shuttle Mission STS-34

A Debris/Ice/Thermal Protection System (TPS) assessment and photographic analysis was conducted for Space Shuttle Mission STS-34. Debris inspections of the flight elements and launch pad are performed before and after launch. Ice/frost conditions on the External Tank are assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by on-pad visual inspection. High speed photography is analyzed after launch to identify ice/debris sources and evaluate potential vehicle damage and/or in-flight anomalies. The debris/ice/TPS conditions and photographic analysis of Mission STS-34, and their overall effect on the Space Shuttle Program are documented.

Stevenson, Charles G.↗