Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mossbauer spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Moessbauer Spectroscopy of Mineral Separates from SNC Meteorites

Numerous workers have recently focused attention on the issue of the oxygen fugacity (f(sub O2)) of martian samples. Estimates of fO2 based on Fe-Ti oxides and D(sub Eu)/D(sub Gd) and D(sub Eu)/D(sub Sm) ratios suggest a range of fO2 values for SNC meteorites from IW+2.5 - IW+3.5 for Shergotty to IW- 2.0 - IW+0.2 for QUE94201. Fe(3+)/Fe(2+) is also a function of f(sub O2), and synchrotron micro-XANES values for olivine, pyroxene, and feldspar Fe(3+) have been reported. However, the relationship between the reported Fe(3+) values and the other methods for estimating f(sub O2) is not clear, and further measurements of Fe(3+)/Fe(2+) by a more conventional technique have been needed. Accordingly, in this project, new Mossbauer spectroscopy data on mineral separates handpicked from 10 SNC meteorites are reported.

Dyar, M. D.↗
NASA NTRS1999

Spectroscopic Properties of Metamorphosed Mafic Rocks: Remote Sensing Applications on Mars

Reflectance spectroscopy in the visible and near-infrared wavelengths, between 420 mn to 2588 nm. was utilized on a suite of hydrothermally metamorphosed mafic rocks from the Smartville complex in the northern Sierra Nevada mountains in California. A detailed data base of 102 samples was compiled in order to distinguish differences in mineralogy, petrology, and degree of metamorphism for remote sensing applications. Study was limited to metaigneous and metasedimentary rocks in an attempt to spectrally characterize terrestrial rocks analogous to the possible surface of Mars, for a better understanding and possible detection of the geologic features on the remote surface. Diagnostic absorption bands of iron, water, and hydroxyl produced the majority of discernible features in this study. Mossbauer spectroscopy was performed in order to determine specific iron sites. The resulting spectral data base along with thin section mineral identification, metamorphic zone, rock type and location were recorded and available for future application and research. Continued exploration of Mars in the advancing years, will further advance our understanding of the geology of Mars. Spectroscopic techniques will undoubtedly be integral parts of these future missions. Work on terrestrial analogs to the Martian surface must continue, in order to produce extensive data bases and broaden our knowledge of spectral features.

Graff, Trevor G.↗
NASA NTRS1971

Oxidation state of iron in plagioclase from lunar basalts.

Determination of the oxidation state of iron in the plagioclase from the coarse-grained basalts 10044 and 12021, using Mossbauer spectroscopy. The location of iron in the crystal structure was also investigated. The spectra show that iron is in the high-spin ferrous state, and they located at least two distinct positions with different coordination numbers. Some excess resonant absorption is probably due to Fe(3+), although the Fe(3+) doublet could not be positively resolved.

Hafner, S. S.↗
NASA NTRS1972

Hyperfine interactions of Fe/2+/ in ilmenite.

Hyperfine interactions at the Fe(2+) sites in ilmenite have been determined by Mossbauer spectroscopy. At 5 K, the internal magnetic field is -43 (plus or minus 3) kOe, and the quadrupole coupling constant is +1.44 (plus or minus 0.01) mm/sec. Theoretical interpretation of the internal magnetic field in terms of dipolar-, orbital-, and core-polarization contributions is shown to depend critically upon the still unknown lattice contribution to the quadrupole coupling constant.

Grant, R. W.↗
NASA NTRS1971

Moessbauer spectra of ferrite catalysts used in oxidative dehydrogenation

Room temperature Mossbauer spectroscopy was used to examine bulk changes which occur in low surface area CoFe2O4 and CuFe2O4 catalysts as a result of contact with various mixtures of trans-2-butene and O2 during oxidative dehydrogenation reactions at about 420 C. So long as there was at least some O2 in the gas phase, the CoFe2O4 spectrum was essentially unchanged. However, the spectrum changed from a random spinel in the oxidized state to an inverse spinel as it was reduced by oxide ion removal. The steady state catalyst lies very near the fully oxidized state. More dramatic solid state changes occurred as the CuFe2O4 underwent reduction. Under severe reduction, the ferrite was transformed into Cu and Fe3O4, but it could be reversibly recovered by oxidation. An intense doublet located near zero velocity persisted in all spectra of CuFe2O4 regardless of the state of reduction.

Cares, W. R.↗
NASA NTRS1973

High voltage electron microscopy of lunar samples

Lunar pyroxenes from Apollo 11, 12, 14, and 15 were investigated. The iron-rich and magnesium-rich pyroxene specimens were crushed to a grain size of ca. 50 microns and studied by a combination of X-ray and electron diffraction, electron microscopy, 57 Fe Mossbauer spectroscopy and X-ray crystallography techniques. Highly ordered, uniform electron-dense bands, corresponding to exsolution lamellae, with average widths of ca. 230A to 1000A dependent on the source specimen were observed. These were?qr separated by wider, less-dense interband spacings with average widths of ca. 330A to 3100A. In heating experiments, splitting of the dense bands into finer structures, leading finally to obliteration of the exsolution lamellae was recorded. The extensive exsolution is evidence for significantly slower cooling rates, or possibly annealing, at temperatures in the subsolidus range, adding evidence that annealing of rock from the surface of the moon took place at ca. 600 C. Correlation of the band structure with magnetic ordering at low temperatures and iron clustering within the bands was studied.

Fernandez-Moran, H.↗
NASA NTRS1974

Mossbauer spectroscopic study of Luna 16 lunar regolith

Samples of bulk fractions of lunar regolith from the surface layer A and the deep layer V were measured by Mossbauer spectroscopy with the FE57 nucleus. Metallic iron, ilmenite, olivine, pyroxene (mainly augite), and glasses were found. The iron distribution by mineral phases indicates that Luna 16 regolith differs from Apollo 11 regolith by a lower ilmenite content and a greater amount of olivine, and differs from Apollo 12 regolith by somewhat more olivine. No appreciable amount of iron was found in the trivalent state.

Malysheva, T. V.↗
NASA NTRS1974

Solar wind and micrometeorite alteration of the lunar regolith

Developments in the understanding of reduction processes which occur in the lunar regolith as a result of solar-wind bombardment and micrometeorite impacts are discussed. The mechanism is described by which water released during reduction is removed from the lunar surface, and the possible contribution of solar-wind sputtering to the reduction process is considered. It is shown that the overall reduction efficiency of incoming hydrogen ions may reach several per cent, which is sufficient to produce all the metallic iron observed in the regolith. Mossbauer spectroscopic data on the amount of metallic iron present as isolated atoms or small clusters in reduced grain surfaces are presented together with data on the metallic iron content of fines samples obtained by Mossbauer spectroscopy, ferromagnetic resonance, and scanning as well as transmission electron microscopy. A portable magnetic probe is described which has been designed for determining surface-exposure age profiles in intact lunar core and drive-tube samples.

Housley, R. M.↗
NASA NTRS1974

Electrical conductivity of lunar surface rocks - Laboratory measurements and implications for lunar interior temperatures

Results are reported for laboratory measurements of the dc and low-frequency ac electrical conductivity of three lunar rocks with ferrous iron contents of 5 to 26 wt %. The measurements were made at temperatures ranging from 20 to 1000 C, and Mossbauer spectroscopy was used to determine the dependence of electrical conductivity on furnace atmosphere. It is found that the magnitude of electrical conductivity generally increases with increasing iron content. A comparison of the data on these samples with data on terrestrial olivines and pyroxenes shows that the electrical conductivity of anhydrous silicate minerals is influenced primarily by the concentration, oxidation state, and distribution of iron, while the silicate crystal structure is only of secondary importance. Lunar interior temperatures are deduced from experimental lunar conductivity profiles, and the resulting temperature-depth profiles are found to be consistent with those calculated for two different lunar evolutionary models as well as with various experimental constraints.

Schwerer, F. C.↗
NASA NTRS1977

Investigation of the composition of the Luna 16 lunar sample

The concentrations of aluminum, manganese, sodium, chromium, iron, cobalt, and 12 rare earth elements were determined by neutron activation analysis using slow neutrons. Oxygen and silicon were determined using a fast neutron generator. Mossbauer spectroscopy was used to investigate iron compounds in Luna 16 regolith samples from the upper part of the core.

Bakos, L.↗
NASA NTRS1977

The analysis of various size, visually selected and density and magnetically separated fractions of Luna 16 and 20 samples

Samples of Luna 16 and 20 have been separated according to size, visual appearance, density, and magnetic susceptibility. Selected aliquots were examined in eight British laboratories. The studies included mineralogy and petrology, selenochronology, magnetic characteristics, Mossbauer spectroscopy, oxygen isotope ratio determinations, cosmic ray track and thermoluminescence investigations, and carbon chemistry measurements. Luna 16 and 20 are typically mare and highland soils, comparing well with their Apollo counterparts, Apollo 11 and 16, respectively. Both soils are very mature (high free iron, carbide, and methane and cosmogenic Ar), while Luna 16, but not Luna 20, is characterized by a high content of glassy materials. An aliquot of anorthosite fragments, handpicked from Luna 20, had a gas retention age of about 4.3 plus or minus 0.1 Gy.

Eglinton, G.↗
NASA NTRS1980

Mossbauer study of FeSi2 and FeSe thin films

Structural studies of FeSi2 and FeSe thin films have been conducted via Mossbauer spectroscopy as continuation of earlier investigation of FeTe films. Results discuss structures of bulk and thin-film FeSi2 and bulk and thin-film FeSe.

Aggarwal, K.↗
NASA NTRS1985

Rapid Solidification of Magnetic Oxides

The enhanced control over microstructural evolution inherent in rapid solidification processing techniques are exploited to create novel ceramic magnetic materials. The great sensitivity of magnetic properties to local structure provides a powerful probe both for the study of structure and of microscopic solidification mechanisms. The first system studied is the SrO-Fe2O3 binary, which contains the commercially important hard magnetic compound strontium hexaferrite. The products were analyzed by transmission electron microscopy, Mossbauer spectroscopy, magnetic measurements, and differential thermal analysis. As-quenched ribbons contain high concentrations of super-paramagnetic particles, 80 to 250 Angstroms in diameter, in a glassy matrix. This suggests the possibility of crystallizing monodomain strontium hexaferrite during subsequent heat treatment, with a resulting increase in coercivity over conventionally processed ferrite magnets. That magnetic properties can be controlled in solidification processing by varying the quench rate is demonstrated.

Kalonji, G.↗
NASA NTRS1986

Lunar sample analysis

A wide variety of lunar sample and meteorite studies were performed. Abstracts of the most recent reports are also attached. Experimental techniques employed have included scanning electron microscopy, transmission electron microscopy, Mossbauer spectroscopy, atomic absorption analysis and a variety of simulation studies.

Housley, R. M.↗
NASA NTRS1987

Nuclear techniques in studies of condensed matter

Nuclear techniques have played an important role in the studies of materials over the past several decades. For example, X-ray diffraction, neutron diffraction, neutron activation, and particle- or photon-induced X-ray emission techniques have been used extensively for the elucidation of structural and compositional details of materials. Several new techniques have been developed recently. Four such techniques are briefly reviewed which have great potential in the study and development of new materials. Of these four, Mossbauer spectroscopy, muon spin rotation, and positron annihilation spectroscopy techniques exploit their great sensitivity to the local atomic environments in the test materials. Interest in synchrotron radiation, on the other hand, stems from its special properties, such as high intensity, high degree of polarization, and high monochromaticity. It is hoped that this brief review will stimulate interest in the exploitation of these newer techniques for the development of improved materials.

Singh, Jag J.↗
NASA NTRS1989

The cooling rate dependence of cation distributions in CoFe2O4

The room-temperature cation distributions in bulk CoFe2O4 samples, cooled at rates between less than 0.01 and about 1000 C/sec, have been determined using Mossbauer spectroscopy in an 80-kOe magnetic field. With increasing cooling rate, the quenched structure departs increasingly from the mostly ordered cation distribution ordinarily observed at room temperature. However, the cation disorder appears to saturate just short of a random distribution at very high cooling rates. These results are interpreted in terms of a simple relaxation model of cation redistribution kinetics. The disordered cation distributions should lead to increased magnetization and decreased coercivity in CoFe2O4.

De Guire, Mark R.↗
NASA NTRS1991

Synthesis and properties of Ti-substituted goethites and hematites

The objective was to synthesize Ti-substituted goethites and hematites and to characterize them using x-ray diffraction, thermogravimetric analysis, coulimetry, optical and Mossbauer spectroscopies, and magnetic data in order to determine the evidence of Ti substitution for Martian spectral data. Evidence is provided that up to 4 mole percent can be incorporated into the goethite structure during the low temperature synthesis. Because the spectral data in the visible and near-IR are not sensitive to the degree of Ti-substitution in goethites and hematites, such data cannot be used to infer the presence or absence of Ti substitution in Martian hematites and goethites.

Vempati, R. K.↗