Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Moment equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Problems in simulating the stratocumulus-topped boundary layer with a third-order closure model

The Andre et al. (1976, 1978) third-order closure model, in which the time rate of change terms, the relaxation and rapid effects for pressure-related terms, and the clipping approximation are used along with the quasi-normal closure, is invoked in the study of turbulence in a cloudy layer that is radiatively cooled from above. A spurious oscillation whose greatest amplitude lies near the inversion is shown by analysis to arise from the mean gradient and buoyancy terms of the triple-moment equations. An attempt is made to damp the oscillation through the introduction of diffusion terms into the triple-moment equations. The results obtained are noted to be sensitive to the ad hoc eddy coefficient applied in the third-moment equations.

Moeng, C.-H.↗

The Aerodynamics of Axisymmetric Blunt Bodies Flying at Angle of Attack

The Mars Science Laboratory entry capsule is used as an example to demonstrate how a blunt body of revolution must be treated as asymmetric in some respects when flying at a non-zero trim angle of attack. A brief description of the axisymmetric moment equations are provided before solving a system of equations describing the lateral-directional moment equations for a blunt body trimming at an angle of attack. Simplifying assumptions are made which allow the solution to the equations to be rearranged to relate the roll and yaw stability with sideslip angle to the frequency of oscillation of the vehicle body rates. The equations show that for a blunt body the roll and yaw rates are in phase and proportional to each other. The ratio of the rates is determined by the static stability coefficients and mass properties about those axes. A trajectory simulation is used to validate the static yaw stability parameter identification equation and a simple method of identifying the oscillation frequency from the body rates. The approach is shown to successfully extract the modeled yaw stability coefficient along a simulated Mars entry in agreement with data earlier analysis of MSL flight data.

Schoenenberger, Mark↗

Six-degree-of-freedom simulation of an astronaut detumble system

The problem of stabilizing the attitude of an untethered astronaut in a three-axis tumble is addressed. A simple six thruster detumbling system mounted on the astronaut's Portable Life Support System backpack is analyzed as a possible solution. A six-degree-of-freedom dynamical model is constructed using the Clohessy-Wiltshire equations, Euler's moment equations, and quaternions. The six thruster system produces both moments and forces when activated. However, it is shown that the thrust forces acting on the body during detumbling do not significantly affect the translational motion.

Fowler, W. T.↗

Discrete ordinates analysis of the forced-flight variance reduction technique in Monte Carlo neutral particle transport simulations

This paper presents mathematical formulations and methods to predict the effect of forced-flight variance reduction on Monte Carlo tally variance and calculation time. This includes deducing biasing operators that are then used to construct a history-score probability density function (HSPDF), which represents all possible Monte Carlo random walks and gives the probability of a Monte Carlo history scoring in a tally from a particular phase-space position. The history-score moment equations (HSMEs), the statistical moments of the HSPDF, are then derived to calculate the statistical behavior of the Monte Carlo tally when forced-flight variance reduction is applied. In addition, the future-time equation (FTE) is derived to predict the Monte Carlo computational time as a result of applying forced-flight variance reduction. The solutions of the HSMEs and FTE can be used to predict Monte Carlo computational cost. Furthermore, this work also describes a discrete ordinates method to solve the forced-flight HSMEs and FTE. Several 1-D and 2-D test problems verify that the derivations are performed and implemented correctly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of multiple scattering on scintillation of transionospheric radio signals

Recent development in the optical scintillation theory has been adapted to the ionospheric geometry in order to study the ionospheric scintillation phenomenon in the presence of multiple scattering. Under approximations well satisfied in typical ionospheres for a frequency above about 20 MHz, the first through fourth moment equations have been derived and some analytic solutions given. The fourth moment equation has also been solved numerically. The numerical results show clearly the occurrence of focusing and saturation phenomena. The new multiple-scatter effects are emphasized.

Liu, C. H.↗

The diffusion approximation and transport theory for cosmic rays in relativistic flows

Equations describing the transport of cosmic rays in relativistic flows in the diffusion approximation are obtained. The analysis is based on the zeroth, first, and second differential moment equations of the relativistic Boltzmann equation with a BGK collision term. A perturbation solution of the moment equations in the diffusion approximation yields both the co-moving frame particle current and viscous stresses. The resultant cosmic-ray continuity equation contains three readily recognized energy change terms: the adiabatic energy change term; the viscous shear energy change term; and a term proportional to the scalar product of the acceleration vector of the scattering frame and the heat flux.

Webb, G. M.↗

Structure of Weak Shock Waves in a Monatomic Gas

The profiles and thicknesses of normal shock waves in argon at Mach numbers of 1.335, 1.454, 1.576, and 1-713 were determined experimentally by means of a free-molecule probe whose equilibrium temperature is related by kinetic theory to the local flow properties and their gradients. Comparisons were made between the experimental shock profiles and the theoretical profiles calculated from the Navier-Stokes equations, the Grad 13-moment equations, and the Burnett equations. New, very accurate numerical integrations of the Burnett equations were obtained for this purpose with results quite different from those found by Zoller, to whom the solution of this problem is frequently attributed. The experimental shock profiles were predicted with approximately equal success by the Navier-Stokes and Burnett theories, while the 13-moment method was definitely less satisfactory. A surprising feature of the theoretical results is the relatively small difference in predictions between the Navier-Stokes and Burnett theories in the present range of shock strengths and the contrastingly large difference between predictions of Burnett and the 13-moment theories. It is concluded that the Navier-Stokes equations are correct for weak shocks and that within the present shock strength range the Burnett equations make no improvement which merits the trouble of solving them. For shocks of noticeably greater strength, say with a shock Mach number of more than 2.5, it remains fundamentally doubtful that any of these theories can be correct.

Sherman, F. S.↗

Impact of Aerodynamic Modeling Assumptions on Flutter Speeds of Vertical-Axis Wind Turbines

Theodorsen’s unsteady aerodynamic theory has been used extensively in flutter speed prediction of wind turbine blades. In this study, three key assumptions of Theodorsen theory (thin airfoil, flat wake, and small angle of attack) have been revisited, and all three assumptions have been addressed in combination to obtain new lift and moment equations that are subsequently applied in flutter calculations for full-scale vertical-axis wind turbine (VAWT) rotors, not just of an individual airfoil or blade. Furthermore, edgewise aerodynamics terms are added to the lift and moment equations to include their effects on flutter speeds. The newly obtained equations were implemented in the OWENS (Offshore Wind ENergy Simulation) toolkit, which is an FEM (Finite Element Method)-based toolkit for aeroelastic analysis of VAWTs. The effect of modifying each of these assumptions has been studied for the flutter RPM prediction of three primary modes of flutter of VAWTs: propeller, butterfly, and tower modes. For the land-based case, the most change was observed for the flutter RPM of the propeller mode, with a maximum increase of 2.62% for the two-bladed UTD 5 MW VAWT case. For the floating offshore case, the primary flutter modes (tower and platform pitch) were not significantly affected.

Engineering↗

Turbulence modeling and experiments

The best way of verifying turbulence is to do a direct comparison between the various terms and their models. The success of this approach depends upon the availability of the data for the exact correlations (both experimental and DNS). The other approach involves numerically solving the differential equations and then comparing the results with the data. The results of such a computation will depend upon the accuracy of all the modeled terms and constants. Because of this it is sometimes difficult to find the cause of a poor performance by a model. However, such a calculation is still meaningful in other ways as it shows how a complete Reynolds stress model performs. Thirteen homogeneous flows are numerically computed using the second order closure models. We concentrate only on those models which use a linear (or quasi-linear) model for the rapid term. This, therefore, includes the Launder, Reece and Rodi (LRR) model; the isotropization of production (IP) model; and the Speziale, Sarkar, and Gatski (SSG) model. Which of the three models performs better is examined along with what are their weaknesses, if any. The other work reported deal with the experimental balances of the second moment equations for a buoyant plume. Despite the tremendous amount of activity toward the second order closure modeling of turbulence, very little experimental information is available about the budgets of the second moment equations. Part of the problem stems from our inability to measure the pressure correlations. However, if everything else appearing in these equations is known from the experiment, pressure correlations can be obtained as the closing terms. This is the closest we can come to in obtaining these terms from experiment, and despite the measurement errors which might be present in such balances, the resulting information will be extremely useful for the turbulence modelers. The purpose of this part of the work was to provide such balances of the Reynolds stress and heat flux equations for the buoyant plume.

Shabbir, Aamir↗

Lagrangian analysis for turbulent transport in variable-density turbulence

In this report Lagrangian analysis of materially conserved scalars is applied to the problem of turbulent transport in variable-density flows. The consequences of an additional material conserved quantity, the density, is generally not acknowledged and leads to significant and meaningfully different expressions for turbulent transport in the moment equations. The formal Lagrangian analysis produces gradient transport expressions substantially different from those obtained by the physically intuitive “argument by analogy” method used in computational models. Various intuitive arguments, in Favre and Reynolds averaged settings, are contrasted to the formal Lagrangian results. Using expressions from the formal analysis, we derive consistent gradient transport closures for the turbulent transport terms that appear in the first- and second-order Favre moment equations. Results for coupled multispecies turbulent transport are given. The analysis is limited to variable-density turbulence in which the dilatation of the fluctuating velocity is small. The results are applicable to turbulent combustion and to stellar convection problems in which the density fluctuations are on the order of the mean density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulations of the stratocumulus-topped boundary layer with a third-order closure model

A third order closure model is proposed by Andre et al. (1982), in which the time rate of change terms, the relaxation and rapid effects for the pressure related terms, and the clipping approximation are included along with the quasi-normal closure, to study turbulence in a cloudy layer which is cooled radiatively from above. A spurious oscillation which is strongest near the inversion occurs. An analysis of the problem shows that the oscillation arises from the mean gradient and buoyancy terms of the triple moment equations; these terms are largest near the cloud top. The oscillation is physical, rather than computational. In nature the oscillation is effectively damped, by a mechanism which apparently is not included in our model. In the stably stratified layer just above the mixed layer top, turbulence can excite gravity waves, whose energy is radiated away. Because the closure assumption for the pressure terms does not take into account the transport of wave energy, the model generates spurious oscillations. Damping of the oscillations is possible by introducing diffusion terms into the triple moment equations. With a large enough choice for the diffusion coefficient, the oscillation is effectively eliminated. The results are quite sensitive to the ad hoc eddy coefficient.

Moeng, C. H.↗

Microscopic Simulation and Macroscopic Modeling for Thermal and Chemical Non-Equilibrium

This paper deals with the accurate microscopic simulation and macroscopic modeling of extreme non-equilibrium phenomena, such as encountered during hypersonic entry into a planetary atmosphere. The state-to-state microscopic equations involving internal excitation, de-excitation, dissociation, and recombination of nitrogen molecules due to collisions with nitrogen atoms are solved time-accurately. Strategies to increase the numerical efficiency are discussed. The problem is then modeled using a few macroscopic variables. The model is based on reconstructions of the state distribution function using the maximum entropy principle. The internal energy space is subdivided into multiple groups in order to better describe the non-equilibrium gases. The method of weighted residuals is applied to the microscopic equations to obtain macroscopic moment equations and rate coefficients. The modeling is completely physics-based, and its accuracy depends only on the assumed expression of the state distribution function and the number of groups used. The model makes no assumption at the microscopic level, and all possible collisional and radiative processes are allowed. The model is applicable to both atoms and molecules and their ions. Several limiting cases are presented to show that the model recovers the classical twotemperature models if all states are in one group and the model reduces to the microscopic equations if each group contains only one state. Numerical examples and model validations are carried out for both the uniform and linear distributions. Results show that the original over nine thousand microscopic equations can be reduced to 2 macroscopic equations using 1 to 5 groups with excellent agreement. The computer time is decreased from 18 hours to less than 1 second.

Modeling↗

A two-region model of the solar wind including azimuthal velocity

The two-region model of the solar wind divides the interplanetary space into two regions: it assumes that the solar wind is one-fluid in an inner region within 0.4 AU and two-fluid in an outer region beyond 0.4 AU. This paper includes the angular motion of the solar wind in the two-region model. The flow in the one-fluid region is governed by the one-fluid magnetohydrodynamic equations. The second and third moment equations of the Vlasov equation together with other conservation equations are used to describe the solar-wind flow in the two-fluid region. The predicted azimuthal velocity at 1 AU is less than 2 km/s. All other macroscopic and microscopic properties from this model are in good agreement with experimental quiet-time observations at 1 AU. The numerical results also confirm that when the azimuthal velocity is included in the analysis, the amount of magnetic-field energy converted into kinetic energy in the solar wind is only a small fraction of the total expansion energy flux and has little effect upon the final radial expansion velocity.

Acuna, M. H.↗

Grain formation around carbon stars. 1: Stationary outflow models

Asymptotic giant branch (AGB) stars are known to be sites of dust formation and undergo significant mass loss. The outflow is believed to be driven by radiation pressure on grains and momentum coupling between the grains and gas. While the physics of shell dynamics and grain formation are closely coupled, most previous models of circumstellar shells have treated the problem separately. Studies of shell dynamics typically assume the existence of grains needed to drive the outflow, while most grain formation models assume a constant veolcity wind in which grains form. Furthermore, models of grain formation have relied primarily on classical nucleation theory instead of using a more realistic approach based on chemical kinetics. To model grain formation in carbon-rich AGB stars, we have coupled the kinetic equations governing small cluster growth to moment equations which determine the growth of large particles. Phenomenological models assuming stationary outflow are presented to demonstrate the differences between the classical nucleation approach and the kinetic equation method. It is found that classical nucleation theory predicts nucleation at a lower supersaturation ratio than is predicted by the kinetic equations, resulting in significant differences in grain properties. Coagulation of clusters larger than monomers is unimportant for grain formation in high mass-loss models but becomes more important to grain growth in low mass-loss situations. The properties of the dust grains are altered considerably if differential drift velocities are ignored in modeling grain formation. The effect of stellar temperature, stellar luminosity, and different outflow velocities are investigated. The models indicate that changing the stellar temperature while keeping the stellar luminosity constant has little effect on the physical parameters of the dust shell formed. Increasing the stellar luminosity while keeping the stellar temperature constant results in large differences in grain properties. For small outflow velocities, grains form at lower supersaturation ratios and close to the stellar photosphere, resulting in larger but fewer grains. The reverse is true when grains form under high outflow velocities, i.e., they form at higher supersaturation ratios, farther from the star, and are much smaller but at larger quantities.

Egan, Michael P.↗

Effects of negative triangularity shaping on energetic particle driven Alfvén eigenmodes in DIII-D

Shape variations from positive to negative triangularity may lead to improved performance regimes in a tokamak with a reduction in microturbulence as well as improved thermal confinement. The motivation of this investigation is to model and compare the neutral beam driven Alfvén eigenmode (AE) activity in two DIII-D discharges with positive and negative triangularity shaping of plasma. The simulations are performed using the linear version of the FAR3d code, which solves the reduced MHD equations for thermal plasma with addition of moment equations for the energetic ion density and parallel velocity with appropriate Landau closure relations. Overall, our numerical results indicate that for similar physical parameters, the unstable AEs observed in the negative triangularity case have lower growth rates as compared to the positive triangularity regime. Our findings may be useful to analyze the influence of the reverse-D like geometry on the AE instabilities in DIII-D and may lead to better configurations for minimizing fast ion losses in a tokamak device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗