Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mechanistic Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Ground-Based Gas-Liquid Flow Research in Microgravity Conditions: State of Knowledge

During the last decade, ground-based microgravity facilities have been utilized in order to obtain predictions for spacecraft system designers and further the fundamental understanding of two-phase flow. Although flow regime, pressure drop and heat transfer coefficient data has been obtained for straight tubes and a limited number of fittings, measurements of the void fraction, film thickness, wall shear stress, local velocity and void information are also required in order to develop general mechanistic models that can be utilized to ascertain the effects of fluid properties, tube geometry and acceleration levels. A review of this research is presented and includes both empirical data and mechanistic models of the flow behavior.

McQuillen, J.↗
NASA NTRS1990

Corrosion fatigue crack propagation in metals

This review assesses fracture mechanics data and mechanistic models for corrosion fatigue crack propagation in structural alloys exposed to ambient temperature gases and electrolytes. Extensive stress intensity-crack growth rate data exist for ferrous, aluminum and nickel based alloys in a variety of environments. Interactive variables (viz., stress intensity range, mean stress, alloy composition and microstructure, loading frequency, temperature, gas pressure and electrode potential) strongly affect crack growth kinetics and complicate fatigue control. Mechanistic models to predict crack growth rates were formulated by coupling crack tip mechanics with occluded crack chemistry, and from both the hydrogen embrittlement and anodic dissolution/film rupture perspectives. Research is required to better define: (1) environmental effects near threshold and on crack closure; (2) damage tolerant life prediction codes and the validity of similitude; (3) the behavior of microcrack; (4) probes and improved models of crack tip damage; and (5) the cracking performance of advanced alloys and composites.

Gangloff, Richard P.↗
NASA NTRS1993

Kinetic dissection of individual steps in the poly(C)-directed oligoguanylate synthesis from guanosine 5'-monophosphate 2-methylimidazolide

A kinetic study of oligoguanylate synthesis on a polycytidylate template, poly(C), as a function of the concentration of the activated monomer, guanosine 5'-monophosphate 2-methylimidazolide, 2-MeImpG, is reported. Reactions were run with 0.005-0.045 M 2-MeImpG in the presence of 0.05 M poly(C) at 23 degrees C. The kinetic results are consistent with a reaction scheme (eq 1) that consists of a series of consecutive steps, each step representing the addition of one molecule of 2-MeImpG to the growing oligomer. This scheme allows the calculation of second-order rate constants for every step by analyzing the time-dependent growth of each oligomer. Computer simulations of the course of reaction based on the determined rate constants and eq 1 are in excellent agreement with the product distributions seen in the HPLC profiles. In accord with an earlier study (Fakhrai, H.; Inoue, T.; Orgel, L. E. Tetrahedron 1984, 40, 39), rate constants, ki, for the formation of the tetramer and longer oligomers up to the 16-mer were found to be independent of length and somewhat higher than k3 (formation of trimer), which in turn is much higher than k2 (formation of dimer). The ki (i > or = 4), k3, and k2 values are not true second-order rate constants but vary with monomer concentration. Mechanistic models for the dimerization (Scheme I) and elongation reactions (Scheme II) are proposed that are consistent with our results. These models take into account that the monomer associates with the template in a cooperative manner. Our kinetic analysis allowed the determination of rate constants for the elementary processes of covalent bond formation between two monomers (dimerization) and between an oligomer and a monomer (elongation) on the template. A major conclusion from our study is that bond formation between two monomer units or between a primer and a monomer is assisted by the presence of additional next-neighbor monomer units. This is consistent with recent findings with hairpin oligonucleotides (Wu, T.; Orgel, L. E. J. Am. Chem. Soc. 1992, 114, 317). Our study is the first of its kind that shows the feasibility of a thorough kinetic analysis of a template-directed oligomerization and provides a detailed mechanistic model of these reactions.

Non-NASA Center↗
NASA NTRS2003

Decoupling of Iron and Phosphate in the Global Ocean

Iron is an essential micronutrient for marine phytoplankton, limiting their growth in high nutrient, low chlorophyll regions of the ocean. I use a hierarchy of ocean circulation and biogeochemistry models to understand controls on global iron distribution. I formulate a mechanistic model of iron cycling which includes scavenging onto sinking particles and complexation with an organic ligand. The iron cycle is coupled to a phosphorus cycling model. Iron's aeolian source is prescribed. In the context of a highly idealized multi-box model scheme, the model can be brought into consistency with the relatively sparse ocean observations of iron in the oceans. This biogeochemical scheme is also implemented in a coarse resolution ocean general circulation model. This model also successfully reproduces the broad regional patterns of iron and phosphorus. In particular, the high macronutrient concentrations of the Southern Ocean result from iron limitation in the model. Due to the potential ability of iron to change the efficiency of the carbon pump in the remote Southern Ocean, I study Southern Ocean surface phosphate response to increased aeolian dust flux. My box model and GCM results suggest that a global ten fold increase in dust flux can support a phosphate drawdown of 0.25-0.5 micromolar.

GLOBAL OCEAN MODEL↗
NASA NTRS2022

Evolution and folding of repeat proteins

Repeat proteins are made with tandem copies of similar amino acid stretches that fold into elongated architectures. These proteins constitute excellent model systems to investigate how evolution relates to structure, folding, and function. Here, we propose a scheme to map evolutionary information at the sequence level to a coarse-grained model for repeat-protein folding and use it to investigate the folding of thousands of repeat proteins. We model the energetics by a combination of an inverse Potts-model scheme with an explicit mechanistic model of duplications and deletions of repeats to calculate the evolutionary parameters of the system at the single-residue level. These parameters are used to inform an Ising-like model that allows for the generation of folding curves, apparent domain emergence, and occupation of intermediate states that are highly compatible with experimental data in specific case studies. We analyzed the folding of thousands of natural Ankyrin repeat proteins and found that a multiplicity of folding mechanisms are possible. Fully cooperative all-or-none transitions are obtained for arrays with enough sequence-similar elements and strong interactions between them, while noncooperative element-by-element intermittent folding arose if the elements are dissimilar and the interactions between them are energetically weak. Additionally, we characterized nucleation-propagation and multidomain folding mechanisms. We show that the global stability and cooperativity of the repeating arrays can be predicted from simple sequence scores.

Ezequiel A. Galpern↗
NASA NTRS1984

Axisymmetric circulations forced by heat and momentum sources - A simple model applicable to the Venus atmosphere

A simple mechanistic model of a zonally averaged circulation forced by heat and momentum sources is developed and applied to the Venus atmosphere in the light of recent data. Basic equations for a steady-state axisymmetric circulation are discussed, and the parametric dependence of a nearly inviscid Hadley circulation in the absence of eddy forcing is examined and extended to a wide range of thermal Rossby numbers. The effect of diffusion is considered and found to be small for the Venus cloud region. The zonally averaged eddy sources and sinks required to support the zonal superrotation on Venus are determined.

Hou, A. Y.↗
NASA NTRS1992

A micromechanics-based progressive failure model for laminated composite structures

A micromechanics-based mechanistic model for progressive failure analysis of laminated composite shell structures is developed. A finite-element program for laminated shell analysis is coupled with a micromechanical elasticity solution for predicting failure and effective composite properties. The laminate model is based on a third-order shell theory which allows for both transverse normal and shearing deformations. Results are presented for the progressive failure of a (0/90(4)s graphite/epoxy laminate under uniaxial tension. The effect of fiber volume fraction in the 90-deg plies on laminate behavior was studied, and it was found that decreasing the fiber-volume fraction in the off-axis plies did not affect the laminate stiffness or the ultimate failure load, but significantly increased the load at which initial failure occurred.

Averill, R. C.↗
NASA NTRS2021

The impact of increasing stratospheric radiative damping on the quasi-biennial oscillation period

Stratospheric radiative damping increases as atmospheric carbon dioxide concentration rises. We use the one-dimensional mechanistic models of the quasi-biennial oscillation (QBO) to conduct sensitivity experiments and find that the simulated QBO period shortens due to the enhancing of radiative damping in the stratosphere. This result suggests that increasing stratospheric radiative damping due to rising CO2 may play a role in determining the QBO period in a warming climate along with wave momentum flux entering the stratosphere and tropical vertical residual velocity, both of which also respond to increasing CO2.

Stratospheric Radiative Damping↗
NASA NTRS2002

Comparison of measurements and models in stratospheric polar vortex studies

An overview will be given of recent studies comparing model results with observations of stratospheric meteorological and trace gas fields, focusing on the polar vortex during winter. Studies comparing process-oriented (e.g., stability) model, mechanistic (i.e., forced lower boundary near the tropopause) model and general circulation model (GCM) simulations of the dynamics of the polar winter stratosphere with analyzed or assimilated meteorological datasets are reviewed.

modeling↗
NASA NTRS2010

Shorebird Migration Patterns in Response to Climate Change: A Modeling Approach

The availability of satellite remote sensing observations at multiple spatial and temporal scales, coupled with advances in climate modeling and information technologies offer new opportunities for the application of mechanistic models to predict how continental scale bird migration patterns may change in response to environmental change. In earlier studies, we explored the phenotypic plasticity of a migratory population of Pectoral sandpipers by simulating the movement patterns of an ensemble of 10,000 individual birds in response to changes in stopover locations as an indicator of the impacts of wetland loss and inter-annual variability on the fitness of migratory shorebirds. We used an individual based, biophysical migration model, driven by remotely sensed land surface data, climate data, and biological field data. Mean stop-over durations and stop-over frequency with latitude predicted from our model for nominal cases were consistent with results reported in the literature and available field data. In this study, we take advantage of new computing capabilities enabled by recent GP-GPU computing paradigms and commodity hardware (general purchase computing on graphics processing units). Several aspects of our individual based (agent modeling) approach lend themselves well to GP-GPU computing. We have been able to allocate compute-intensive tasks to the graphics processing units, and now simulate ensembles of 400,000 birds at varying spatial resolutions along the central North American flyway. We are incorporating additional, species specific, mechanistic processes to better reflect the processes underlying bird phenotypic plasticity responses to different climate change scenarios in the central U.S.

Smith, James A.↗
NASA NTRS2011

The Analysis of the Patterns of Radiation-Induced DNA Damage Foci by a Stochastic Monte Carlo Model of DNA Double Strand Breaks Induction by Heavy Ions and Image Segmentation Software

To create a generalized mechanistic model of DNA damage in human cells that will generate analytical and image data corresponding to experimentally observed DNA damage foci and will help to improve the experimental foci yields by simulating spatial foci patterns and resolving problems with quantitative image analysis. Material and Methods: The analysis of patterns of RIFs (radiation-induced foci) produced by low- and high-LET (linear energy transfer) radiation was conducted by using a Monte Carlo model that combines the heavy ion track structure with characteristics of the human genome on the level of chromosomes. The foci patterns were also simulated in the maximum projection plane for flat nuclei. Some data analysis was done with the help of image segmentation software that identifies individual classes of RIFs and colocolized RIFs, which is of importance to some experimental assays that assign DNA damage a dual phosphorescent signal. Results: The model predicts the spatial and genomic distributions of DNA DSBs (double strand breaks) and associated RIFs in a human cell nucleus for a particular dose of either low- or high-LET radiation. We used the model to do analyses for different irradiation scenarios. In the beam-parallel-to-the-disk-of-a-flattened-nucleus scenario we found that the foci appeared to be merged due to their high density, while, in the perpendicular-beam scenario, the foci appeared as one bright spot per hit. The statistics and spatial distribution of regions of densely arranged foci, termed DNA foci chains, were predicted numerically using this model. Another analysis was done to evaluate the number of ion hits per nucleus, which were visible from streaks of closely located foci. In another analysis, our image segmentaiton software determined foci yields directly from images with single-class or colocolized foci. Conclusions: We showed that DSB clustering needs to be taken into account to determine the true DNA damage foci yield, which helps to determine the DSB yield. Using the model analysis, a researcher can refine the DSB yield per nucleus per particle. We showed that purely geometric artifacts, present in the experimental images, can be analytically resolved with the model, and that the quantization of track hits and DSB yields can be provided to the experimentalists who use enumeration of radiation-induced foci in immunofluorescence experiments using proteins that detect DNA damage. An automated image segmentaiton software can prove useful in a faster and more precise object counting for colocolized foci images.

Ponomarev, Artem↗
NASA NTRS2019

Integrating Remote Sensing Observations with NASA's GEOS-5 Modeling Framework in Support of Retrospective Analyses and Seasonal Prediction of Biosphere-Atmosphere CO2 Flux

The absorption of nearly half of all anthropogenic carbon dioxide (CO2) emissions by terrestrial and marine ecosystems has played a critical role in mitigating climate change. However, a persistent lack of understanding of these uptake processes impedes attribution, and thereby introduces large uncertainties into projections of the trajectory of carbon and climate in coming decades. A better understanding and quantification of the seasonal and interannual variability of carbon flux between the atmosphere and ocean and terrestrial biospheres is critically needed to improve predictions from Earth system models. We propose to bring together a diverse suite of remote sensing observations, mechanistic models, and NASA's Goddard Earth Observing System, version 5 (GEOS-5) model to address two objective 1) quantify the processes controlling the temporal variability of biosphere-atmosphere CO2 flux on seasonal and interannual timescales from 1989 to 2018 and 2) evaluating the predictability of the components of carbon flux on seasonal timescales. Because GEOS-5 has been developed to incorporate a variety of Earth system observations and includes a complete and physically consistent depiction of the atmosphere, land, and ocean carbon cycles, it represents a unique and ideal synthesis framework for this effort. By expanding the realism of processes that could be included in GEOS-5 seasonal forecasts, this effort supports NASA's goals toward an integrated Earth system modeling and prediction framework.We propose to integrate a number of observations into the GEOS-5 modeling system to refine retrospective estimates of both terrestrial and marine carbon flux and to test hypotheses regarding the effects of climate drivers on terrestrial carbon flux. This will include assimilating several satellite ocean color products in the NASA Ocean Biogeochemistry Model (NOBM) to improve the representation of ocean biology. We will also utilize remote sensing datasets to increase the temporal resolution of global land-use change estimates and fire emissions to better constrain the temporal variability of the terrestrial carbon cycle. This information will be incorporated into two NASA terrestrial biosphere models Catchment-CN, a dynamic vegetation model that is integrated within GEOS-5 and the Ecosystem Demography (ED) model, a core modeling resource supporting the Global Ecosystem Dynamics Investigation (GEDI) mission to map biomass. Fluxes will be evaluated through 1) comparison to top-down flux estimates inferred from surface CO2 observations and 2) comparison against available aircraft and satellite observations.By combining predictions of net ecosystem exchange and air-sea CO2 flux from land and ocean models with statistical predictions of land use change, fire, and fossil fuel emissions, we propose to create the first dynamical CO2 forecast on seasonal timescales. Because of the experimental nature of this endeavor, an important project objective will be to evaluate the limits to the predictability of different carbon cycle processes over lead times of 1-12 months using different satellite and surface data streams.

Ott, Lesley↗
NASA NTRS2005

Space Based Ornithology: On the Wings of Migration and Biophysics

The study of bird migration on a global scale is one of the compelling and challenging problems of modern biology with major implications for human health and conservation biology. Migration and conservation efforts cross national boundaries and are subject to numerous international agreements and treaties. Space based technology offers new opportunities to shed understanding on the distribution and migration of organisms on the planet and their sensitivity to human disturbances and environmental changes. Migration is an incredibly diverse and complex behavior. A broad outline of space based research must address three fundamental questions: (1) where could birds be, i.e. what is their fundamental niche constrained by their biophysical limits? (2) where do we actually find birds, i.e. what is their realizable niche as modified by local or regional abiotic and biotic factors, and (3) how do they get there (and how do we know?), that is what are their migration patterns and associated mechanisms? Our working hypothesis is that individual organism biophysical models of energy and water balance, driven by satellite measurements of spatio-temporal gradients in climate and habitat, will help us to explain the variability in avian species richness and distribution. Dynamic state variable modeling provides one tool for studying bird migration across multiple scales and can be linked to mechanistic models describing the time and energy budget states of migrating birds. Such models yield an understanding of how a migratory flyway and its component habitats function as a whole and link stop-over ecology with biological conservation and management. Further these models provide an ecological forecasting tool for science and application users to address what are the possible consequences of loss of wetlands, flooding, drought or other natural disasters such as hurricanes on avian biodiversity and bird migration.

Smith, James A.↗
NASA NTRS2001

Implementing a Nitrogen-Based Model for Autotrophic Respiration Using Satellite and Field Observations

The rate of carbon accumulation by terrestrial plant communities in a process-level, mechanistic modeling is the difference of the rate of gross photosynthesis by a canopy (A(sub g)) and autotrophic respiration (R) of the stand. Observations for different biomes often show that R to be a large and variable fraction of A(sub g), ca. 35% to 75%, although other studies suggest the ratio of R and A(sub g) to be less variable. Here, R has been calculated according to the two compartment model as being the sum of maintenance and growth components. The maintenance respiration of foliage and living fine roots for different biomes has been determined objectively from observed nitrogen content of these organs. The sapwood maintenance respiration is based on pipe theory, and checked against an independently derived equation considering sapwood biomass and its maintenance coefficient. The growth respiration has been calculated from the difference of A(sub g) and maintenance respiration. The A(sub g) is obtained as the product of biome-specific radiation use efficiency for gross photosynthesis under unstressed conditions and intercepted photosynthetically active radiation, and adjusted for stress. Calculations have been done using satellite and ground observations for 36 consecutive months (1987-1989) over large contiguous areas (ca. 10(exp 5) sq km) of boreal forests, crop land, temperate deciduous forest, temperate grassland, tropical deciduous forest, tropical evergreen forest, tropical savanna, and tundra. The ratio of annual respiration and gross photosynthesis, (R/A(sub g)), is found to be 0.5-0.6 for temperate and cold adopted biome areas, but somewhat higher for tropical biome areas (0.6-0.7). Interannual variation of the fluxes is found to be generally less than 15%. Calculated fluxes are compared with observations and several previous estimates. Results of sensitivity analysis are presented for uncertainties in parameterization and input data. It is found that uncertainty in determining maintenance respiration for tropical biomes is such that R/A(sub g) for these biomes could be similar to that for temperate biomes.

Choudhury, Bhaskar J.↗
NASA NTRS2006

Space-Based Ornithology: On the Wings of Migration and Biophysics

Understanding bird migration and avian biodiversity is one of the most compelling and challenging problems of modern biology with major implications for human health and conservation biology. Migration and conservation efforts cross national boundaries and are subject to numerous international agreements and treaties. Public interest is high with concerns about avian flu, Katrina and its impacts, and the recent sightings of the ivory-billed woodpecker. Space based technology gives us new opportunities to shed light on the distribution and movement of organisms on the planet and their sensitivity to human disturbances and environmental changes. Together with the USGS and other agencies, we are creating ecological forecasting tools for science and application users to address the consequences of loss of wetlands, flooding, drought or other natural disasters such as hurricanes on avian biodiversity and bird migration. In our work, we use individual organism biophysical models of energy and water balance and drive these models with satellite measurements of spatio-temporal gradients in climate and habitat. Dynamic state variable modeling provides an additional tool for studying bird migration across multiple scales and can be linked to our mechanistic models describing the time and energy budget states of migrating birds. Such models yield an understanding of how a migratory flyway and its component habitats function as a whole and link stop-over ecology with biological conservation and management. We also build upon the canopy done by the Environmental Laboratory over the past few years.

Smith, James A.↗
NASA NTRS2017

Predictive Modeling of Fast-Curing Thermosets in Nozzle-Based Extrusion

This work presents an approach to modeling the dynamic spreading and curing behavior of thermosets in nozzle-based extrusions. Thermosets cover a wide range of materials, some of which permit low-temperature processing with subsequent high-temperature and high-strength working properties. Extruding thermosets may overcome the limited working temperatures and strengths of conventional thermoplastic materials used in additive manufacturing. This project aims to produce technology for the fabrication of thermoset-based structures leveraging advances made in nozzle-based extrusion, such as fused deposition modeling (FDM), material jetting, and direct writing. Understanding the synergistic interactions between spreading and fast curing of extruded thermosetting materials will provide essential insights for applications that require accurate dimensional controls, such as additive manufacturing [1], [2] and centrifugal coating/forming [3]. Two types of thermally curing thermosets -- one being a soft silicone (Ecoflex 0050) and the other being a toughened epoxy (G/Flex) -- served as the test materials in this work to obtain models for cure kinetics and viscosity. The developed models align with extensive measurements made with differential scanning calorimetry (DSC) and rheology. DSC monitors the change in the heat of reaction, which reflects the rate and degree of cure at different crosslinking stages. Rheology measures the change in complex viscosity, shear moduli, yield stress, and other properties dictated by chemical composition. By combining DSC and rheological measurements, it is possible to establish a set of models profiling the cure kinetics and chemorheology without prior knowledge of chemical composition, which is usually necessary for sophisticated mechanistic modeling. In this work, we conducted both isothermal and dynamic measurements with both DSC and rheology. With the developed models, numerical simulations yielded predictions of diameter and height of droplets, along with width and height of extruded lines cured at varied temperatures. Experimental results carried out on a goniometric platform and a nozzle-based 3D printer showed agreement with the numerical simulations. Finally, this presentation will show how the models are adaptable to the planning of tool paths and designs in additive manufacturing.

Xie, Jingjin↗