Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Matrix models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Finite-temperature phase diagram of the Berenstein-Maldacena-Nastase matrix model on the lattice

We investigate the thermal phase structure of the Berenstein-Maldacena-Nastase matrix model using nonperturbative lattice Monte Carlo calculations. Our main analyses span 3 orders of magnitude in the coupling, involving systems with sizes up to 𝑁𝜏 =24 lattice sites and SU⁡(𝑁) gauge groups with 8 ≤𝑁 ≤16. In addition, we carry out extended checks of discretization artifacts for 𝑁𝜏 ≤128 and gauge group SU(4). We find results for the deconfinement temperature that interpolate between the perturbative prediction at weak coupling and the large-𝑁 dual supergravity calculation at strong coupling. While we confirm that the phase transition is first order for strong coupling, it appears to be continuous for weaker couplings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Density-Matrix Model for Photon-Driven Transport in Quantum Cascade Lasers

In this report we develop a time-dependent density-matrix model to study photon-assisted (PA) electron transport in quantum cascade lasers. The Markovian equation of motion for the density matrix in the presence of an optical field is solved for an arbitrary field amplitude. Level-broadening terms emerge from microscopic Hamiltonians and supplant the need for empirical parameters that are often employed in related approaches. We show that, in quantum cascade lasers with diagonal design, photon resonances have a pronounced impact on electron dynamics around and above the lasing threshold, an effect that stems from the large spatial separation between the upper and lower lasing states. With the inclusion of PA tunneling, the calculated current density and output power are in good agreement with experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Random matrix model of the Virasoro minimal string

The model of two dimensional quantum gravity defining the Virasoro minimal string, presented recently by Collier, Eberhardt, Mühlmann, and Rodriguez, was also shown to be perturbatively (in topology) equivalent to a random matrix model. An alternative definition is presented here, in terms of double-scaled orthogonal polynomials, thereby allowing direct access to nonperturbative physics. Already at leading order, the defining string equation’s properties yield valuable information about the nonperturbative fate of the model, confirming that the case ( c = 25 , c ^ = 1 ) (central charges of spacelike and timelike Liouville sectors) is special, by virtue of sharing certain key features of the N = 1 supersymmetric JT gravity string equation. Solutions of the full string equation are constructed using a special limit, and the (Cardy) spectral density is completed to all genus and beyond. The distributions of the underlying discrete spectra are readily accessible too, as is the spectral form factor. Some examples of these are exhibited. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2023

Even spheres as joint spectra of matrix models

The Clifford spectrum is a form of joint spectrum for noncommuting matrices. This theory has been applied in photonics, condensed matter and string theory. In applications, the Clifford spectrum can be efficiently approximated using numerical methods, but this only is possible in low dimensional example. In this paper we examine the higher-dimensional spheres that can arise from theoretical examples. We also describe a constructive method to generate five real symmetric almost commuting matrices that have a K-theoretical obstruction to being close to commuting matrices. For this, we look to matrix models of topological electric circuits.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2013

Floating Node Method and Virtual Crack Closure Technique for Modeling Matrix Cracking-Delamination Interaction

A novel approach is proposed for high-fidelity modeling of progressive damage and failure in composite materials that combines the Floating Node Method (FNM) and the Virtual Crack Closure Technique (VCCT) to represent multiple interacting failure mechanisms in a mesh-independent fashion. In this study, the approach is applied to the modeling of delamination migration in cross-ply tape laminates. Delamination, matrix cracking, and migration are all modeled using fracture mechanics based failure and migration criteria. The methodology proposed shows very good qualitative and quantitative agreement with experiments.

DeCarvalho, N. V.↗
NASA NTRS2013

Floating Node Method and Virtual Crack Closure Technique for Modeling Matrix Cracking-Delamination Migration

A novel approach is proposed for high-fidelity modeling of progressive damage and failure in composite materials that combines the Floating Node Method (FNM) and the Virtual Crack Closure Technique (VCCT) to represent multiple interacting failure mechanisms in a mesh-independent fashion. In this study, the approach is applied to the modeling of delamination migration in cross-ply tape laminates. Delamination, matrix cracking, and migration are all modeled using fracture mechanics based failure and migration criteria. The methodology proposed shows very good qualitative and quantitative agreement with experiments.

DeCarvalho, Nelson V.↗
DOE OSTI2021

2D dilaton-gravity, deformations of the minimal string, and matrix models

A large class of two-dimensional dilaton-gravity theories in asymptotically AdS2 spacetimes are holographically dual to a matrix integral, interpreted as an ensemble average over Hamiltonians. Viewing these theories as Jackiw–Teitelboim gravity with a gas of defects, we extend this duality to a broader class of dilaton potentials compared to previous work by including conical defects with small deficit angles. In order to do this we show that these theories are equal to the large p limit of a natural deformation of the (2, p) minimal string theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1994

A fiber matrix model for fluid flow and streaming potentials in the canaliculi of an osteon

A theoretical model is developed to predict the fluid shear stress and streaming potential at the surface of osteocytic processes in the lacunar-canalicular porosity of an osteon when the osteon is subject to mechanical loads that are parallel or perpendicular to its axis. The theory developed in Weinbaum et al. (31) for the flow through a proteoglycan matrix in a canaliculus is employed in a poroelastic model for the osteon. Our formulation is a generalization of that of Petrov et al. (17). Our model predicts that, in order to satisfy the measured frequency dependence of the phase and magnitude of the SGP in macroscopic bone samples, the fiber spacing in the fluid annulus must lie in the narrow range 6-7 nm typical of the spacing of GAG sidechains along a protein monomer. The model predictions for the local SGP profiles in the osteon agree with the experimental observations of Starkebaum et al. (24). The theory predicts that the pore pressure relaxation time, tau d, for a 150-300 microns diameter osteon with the foregoing matrix structure is approximately 0.03-0.13 sec, and that the amplitude of the mean fluid shear stress on the membrane of the osteocytic process at the mean areal radius of the osteon has a maximum at 28 Hz if tau d = 0.06 sec. This maximum, which is independent of the magnitude of the loading, could be important in vivo since the recent experiments of Turner et al. (28) and McLeod et al. (15) have a peak in the strain frequency spectrum between 20 and 30 Hz that also appears to be independent of the type (magnitude) of loading. Numerical predictions for the amplitude of the average fluid shear stress on the osteocytic membrane at the mean areal radius of the osteon show that the fluid shear stress associated with the low amplitude 20-30 Hz spectral strain component is at least as large as the average fluid shear stress associated with the high amplitude 1 Hz stride component, although the latter loading is an order of magnitude larger, and has a magnitude that lies within the middle of the range, 6-30 dynes/cm2, where fluid shear stresses in tissue culture studies with osteoblast monolayers have elicited an intracellular Ca++ response (31). The implications of these results for intracellular electrical communication are discussed.

Non-NASA Center↗
NASA NTRS2013

T-Matrix Modeling of Linear Depolarization by Morphologically Complex Soot and Soot-Containing Aerosols

We use state-of-the-art public-domain Fortran codes based on the T-matrix method to calculate orientation and ensemble averaged scattering matrix elements for a variety of morphologically complex black carbon (BC) and BC-containing aerosol particles, with a special emphasis on the linear depolarization ratio (LDR). We explain theoretically the quasi-Rayleigh LDR peak at side-scattering angles typical of low-density soot fractals and conclude that the measurement of this feature enables one to evaluate the compactness state of BC clusters and trace the evolution of low-density fluffy fractals into densely packed aggregates. We show that small backscattering LDRs measured with groundbased, airborne, and spaceborne lidars for fresh smoke generally agree with the values predicted theoretically for fluffy BC fractals and densely packed near-spheroidal BC aggregates. To reproduce higher lidar LDRs observed for aged smoke, one needs alternative particle models such as shape mixtures of BC spheroids or cylinders.

atmospheric radiation↗
DOE OSTI2022

Flow and transport in three-dimensional discrete fracture matrix models using mimetic finite difference on a conforming multi-dimensional mesh

Here, we present a comprehensive workflow to simulate single-phase flow and transport in fractured porous media using the discrete fracture matrix approach. The workflow has three primary parts: (1) a method for conforming mesh generation of and around a three-dimensional fracture network, (2) the discretization of the governing equations using a second-order mimetic finite difference method, and (3) implementation of numerical methods for high-performance computing environments. A method to create a conforming Delaunay tetrahedralization of the volume surrounding the fracture network, where the triangular cells of the fracture mesh are faces in the volume mesh, that addresses pathological cases which commonly arise and degrade mesh quality is also provided. Our open-source subsurface simulator uses a hierarchy of process kernels (one kernel per physical process) that allows for both strong and weak coupling of the fracture and matrix domains. We provide verification tests based on analytic solutions for flow and transport, as well as numerical convergence. We also provide multiple expositions of the method in complex fracture networks. In the first example, we demonstrate that the method is robust by considering two scenarios where the fracture network acts as a barrier to flow, as the primary pathway, or offers the same resistance as the surrounding matrix. In the second test, flow and transport through a three-dimensional stochastically generated network containing 257 fractures is presented.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

A Mixed Fracture-Matrix Model for Evaluating Well Orientation and Completion Options for the Utah FORGE Site

Orientation and completion for well pairs that have been subjected to multi-zonal stimulation play a critical role in the long-term performance of an Enhanced Geothermal Reservoir. Here we present the development of a methodology to rapidly and efficiently numerically simulate mixed fracture-matrix flow systems for evaluation of well design and completion options. An example evaluation based on a small fracture network representative of FORGE Well 16(A and B)-78(32) follows a discussion of the theory and model validation.

58 GEOSCIENCES↗
DOE OSTI2021

A Mixed Fracture-Matrix Model for Evaluating Well Orientation and Completion Options for the Utah FORGE Site

Orientation and completion for well pairs that have been subjected to multi-zonal stimulation play a critical role in the long-term performance of an Enhanced Geothermal Reservoir. Here we present the development of a methodology to rapidly and efficiently numerically simulate mixed fracture-matrix flow systems for evaluation of well design and completion options. An example evaluation based on a small fracture network representative of FORGE Well 16(A and B)-78(32) follows a discussion of the theory and model validation.

15 GEOTHERMAL ENERGY↗
NASA NTRS1987

Transfer matrix modeling of geared system vibration

The need for a general technique to predict geared system response is demonstrated. It is believed that an analytical model that is general enough to allow for the analysis of arbitrarily constructed systems would be the most useful. Transfer matrices in geared system analysis are discussed and an example problem is presented.

David, J. W.↗
NASA NTRS1990

Unitary-matrix models as exactly solvable string theories

Exact differential equations are presently found for the scaling functions of models of unitary matrices which are solved in a double-scaling limit, using orthogonal polynomials on a circle. For the case of the simplest, k = 1 model, the Painleve II equation with constant 0 is obtained; possible nonperturbative phase transitions exist for these models. Equations are presented for k = 2 and 3, and discussed with a view to asymptotic behavior.

Periwal, Vipul↗
NASA NTRS2024

How the INCOSE Model-Based Capability Matrix Has Steered Model-Based Systems Engineering Transformation at NASA

The National Aeronautics and Space Administration (NASA) is embarking on new, complex, and diverse missions to accomplish its scientific and exploration objectives, and it views digital transformation as a key enabler for those missions. The NASA Model-Based Systems Engineering (MBSE) Lead-ership Team (MLT) is leading the charge in the digital transformation of the systems engineering domain at NASA, and it is using the INCOSE Model-Based Capability Matrix (MBCM) as a roadmap. This paper discusses the modifications and tailoring of the INCOSE MBCM (Hale & Hoheb, 2020) for use at NASA, the process the team has taken on multiple rounds of assessment, findings to date, and work products that have been generated as a result of the assessment. The paper will also discuss findings and potential changes that should be made to the original product.

MBSE↗