Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MOLECULAR PUMP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

SysML Success Tree for DAVINCI In-Situ Campaign Requirements Validation and Redundancy Assessment

The DAVINCI mission will scientifically study the Venusian atmosphere to better understand the current state of the planet and its evolutionary history. This will be accomplished by deploying a descent probe to collect in-situ atmospheric dynamic and spectroscopic measurements, characterize ambient temperatures and pressures during descent, and surface imaging below the cloud layer. To better characterize the DAVINCI In-Situ Campaign, a success tree, developed in the SysML tool, MagicDraw, was created to define the events necessary to have a successful in-situ campaign, for each phase of the campaign. This success tree was also used to validate DAVINCI Program, Mission, and Element level requirements. In addition, because DAVINCI is a single-string mission, the success tree was also used to identify areas of redundancy and resiliency throughout the campaign. The initial redundancy assessment recommended further on-orbit evaluation of the probe’s communication system, as well as further evaluation of the ability of the mass spectrometer turbo-molecular pump to handle the expected decent environment. During the integration and test phase of the overall mission, the success tree will be used to guide the mission validation process, helping to ensure that the in-situ mission elements can perform in accordance with the DAVINCI In-Situ Concept of Operations document.

ConOps↗
NASA NTRSDate not supplied

SysML Success Tree for DAVINCI In-Situ Campaign Requirements Validation and Redundancy Assessment

The DAVINCI mission will scientifically study the Venusian atmosphere to better understand the current state of the planet and its evolutionary history. This will be accomplished by deploying a descent probe to collect in-situ atmospheric dynamic and spectroscopic measurements, characterize ambient temperatures and pressures during descent, and surface imaging below the cloud layer. To better characterize the DAVINCI In-Situ Campaign, a success tree, developed in the SysML tool, MagicDraw, was created to define the events necessary to have a successful in-situ campaign, for each phase of the campaign. This success tree was also used to validate DAVINCI Program, Mission, and Element level requirements. In addition, because DAVINCI is a single-string mission, the success tree was also used to identify areas of redundancy and resiliency throughout the campaign. The initial redundancy assessment recommended further on-orbit evaluation of the probe’s communication system, as well as further evaluation of the ability of the mass spectrometer turbo-molecular pump to handle the expected decent environment. During the integration and test phase of the overall mission, the success tree will be used to guide the mission validation process, helping to ensure that the in-situ mission elements can perform in accordance with the DAVINCI In-Situ Concept of Operations document.

model-based↗
NASA NTRS1986

Ultraviolet-pumped infrared fluorescent molecular hydrogen emission in reflection nebulae

Strong molecular hydrogen emission at 2.41 microns has been observed in three out of six reflection nebulae surveyed. A spectrum of one nebula, Parsamyan 18, shows several H2 lines whose intensity ratios have values agreeing with those predicted if the excitation is due to UV-pumped fluoresence and disagreeing with those predicted for shock and X-ray excitations.

Sellgren, K.↗
NASA NTRS2013

Very-Low-Cost, Rugged Vacuum System

NASA, DoD, DHS, and commercial industry have a need for miniaturized, rugged, low-cost vacuum systems. Recent advances in sensor technology have led to the development of very small mass spectrometer detectors as well as other miniature analytical instruments. However, the vacuum systems to support these sensors remain large, heavy, and power-hungry. To meet this need, a miniaturized vacuum system was created based on a very small, rugged, and inexpensive- to-manufacture molecular drag pump (MDP). The MDP is enabled by the development of a miniature, veryhigh- speed, rugged, low-power, brushless DC motor optimized for wide temperature operation and long life. Such a pump represents an order-of-magnitude reduction in mass, volume, and cost over current, commercially available, state-ofthe- art vacuum pumps. The vacuum system consists of the MDP coupled to a ruggedized rough pump (for terrestrial applications or for planets with substantial atmospheres). The rotor in the MDP consists of a simple smooth cylinder of aluminum spinning at approximately 200,000 RPM inside an outer stator housing. The pump stator comprises a cylindrical aluminum housing with one or more specially designed grooves that serve as flow channels. To minimize the length of the pump, the gas is forced down the flow channels of the outer stator to the base of the pump. The gas is then turned and pulled toward the top through a second set of channels cut into an inner stator housing that surrounds the motor. The compressed gas then flows down channels in the motor housing to the exhaust port of the pump. The exhaust port of the pump is connected to a diaphragm or scroll pump. This pump delivers very high performance in a very small envelope. The design was simplified so that a smaller compression ratio, easier manufacturing process, and enhanced ruggedness can be achieved at the lowest possible cost. The machining of the rotor and stators is very simple compared to that necessary to fabricate TMP (turbo molecular pump) rotor and stator blades. Also, the symmetry of the rotor is such that dynamic balancing of the rotor is greatly simplified. Finally, because of the simplified design, the number of parts in the unit is cut by nearly a factor of three. In fact, there are only five parts, not counting the motor and off-the-shelf screws and O-rings. This reduces the amount of machining and also makes fit-up much simpler while allowing the maintenance of close tolerances.

Kline-Schoder, Robert↗
NASA NTRS1967

Molecular sink.

Molecular sink for simulated testing of spacecraft components noting vessel construction, vacuum pump system, molecular trap array, etc

MOLECULAR PUMP↗
NASA NTRS1994

The near-infrared structure and spectra of the bipolar nebulae M2-9 and AFGL 2688: The role of ultraviolet pumping and shocks in molecular hydrogen excitation

High-resolution near-infrared images and moderate resolution spectra were obtained of the bipolar nebulae M2-9 and AFGL 2688. The ability to spatially and spectrally resolve the various components of the nebulae has proved to be important in determining their physical structure and characteristics. In M2-9, the lobes are found to have a double-shell structure. The inner shell is dominated by emission from hydrogen recombination lines, and the outer shell is primarily emission from H2 lines in teh 2-2.5 micron region. Analysis of H2 line ratios indicates that the H2 emission is radiatively excited. A well-resolved photodissociation region is observed in the lobes. The spectrum of the central source is dominated by H recombination lines and a strong continuum rising toward longer wavelengths consistent with a T = 795 K blackbody. Also present are lines of He I and Fe II. In contrast, the N knot and E lobe of M2-9 show little continuum emission. The N knot spectrum consists of lines of (Fe II) and hydrogen recombination lines. In AGFL 2688, the emission from the bright lobes is mainly continuum reflected from the central star. Several molecular features from C2 and CN are present. In the extreme end of the N lobe and in the E equatorial region, the emission is dominated by lines of H2 in the 2-2.5 region. The observed H2 line ratios indicate that the emission is collisionally excited, with an excitation temperature T(sub ex) approixmately = 1600 +/- 100 K.

Hora, Joseph L.↗
NASA NTRS1975

Studies of discharge mechanisms in high pressure gases-applications to high efficiency high power lasers

By measuring the absorption and emission cantinua of various states in the cesium/xenon molecule, the collisional rates critical in populating the alkali/rare gas excimer levels have been estimated. Cs atomic states that are weakly optically connected to ground have been shown to form excimer levels that are attractive as potential dissociation lasers. In particular, the (Cs/7 2S/Xe) excited molecule appears promising as a source of high energy laser radiation due to its large dissociation energy, stimulated emission cross section, and small population inversion densities. Monitoring of the optically pumped Cs2 molecular absorption profile in the presence of xenon shows a drastic change with increasing xenon pressure for the Cs2C band. Dominant absorption at large xenon densities is centered around approximately 6380 A as opposed to 6300 A for lower perturber pressure.

Cherrington, B. E.↗
NASA NTRS1980

Collisional narrowing by polyatomic buffer gases in an optically pumped CH3F laser

The gain linewidth of an optically pumped CH3F molecular laser is observed with the addition of various polyatomic buffer gases. This is interpreted as collisional (Dicke) narrowing. The measurement is the first observation of collisional narrowing by polyatomic buffer gases. It is also the first observation of the effect in a laser oscillator. The effect was observed using a heterodyne mixing technique at the laser emission frequency of 604 GHz. Collision cross sections for SF6-CH3F and CS2-CH3F are obtained.

Lawandy, N. M.↗
NASA NTRS1994

Apparent sizes and spectral line profiles for spherical ('three-dimensional') astrophysical masers

Calculations are performed for the frequency-dependent transport of radiation in a uniform spherical maser. Coupling between the intensities at different frequencies is treated. Spherical masers are commonly utilized as idealized geometries in which to assess possible deviations (sometimes, 'three-dimensional effects') from the approximation of a linear geometry. We find that the spectral line profile rebroadens in approximately the same manner as that for a linear maser so that the relationship between the line breadth and the luminosity, beaming angle, and degree of saturation is essentially unchanged. The variation of the apparent size of a spherical maser with frequency is not found to be significant at frequencies within the line profile at which the intensity is appreciable. The 'standard approximation' is adequate for obtaining most of the basic properties of spherical masers that have been examined including the relationship between the pumping (or molecular populations) and the intensity of maser radiation. The improved methods employed here are, however, necessary to obtain variation of the apparent size with frequency in the saturated regime. These conclusions differ from those of previous investigators. The calculations here are more reliable than those of previous investigators because these are self-consistent and avoid certain inaccurate simplifications.

Emmering, Robert T.↗
NASA NTRS2012

Low-Cost, Rugged High-Vacuum System

A need exists for miniaturized, rugged, low-cost high-vacuum systems. Recent advances in sensor technology have led to the development of very small mass spectrometer detectors as well as other analytical instruments such as scanning electron microscopes. However, the vacuum systems to support these sensors remain large, heavy, and power-hungry. To meet this need, a miniaturized vacuum system was developed based on a very small, rugged, and inexpensive-to-manufacture molecular drag pump (MDP). The MDP is enabled by a miniature, very-high-speed (200,000 rpm), rugged, low-power, brushless DC motor optimized for wide temperature operation and long life. The key advantages of the pump are reduced cost and improved ruggedness compared to other mechanical hig-hvacuum pumps. The machining of the rotor and stators is very simple compared to that necessary to fabricate rotor and stator blades for other pump designs. Also, the symmetry of the rotor is such that dynamic balancing of the rotor will likely not be necessary. Finally, the number of parts in the unit is cut by nearly a factor of three over competing designs. The new pump forms the heart of a complete vacuum system optimized to support analytical instruments in terrestrial applications and on spacecraft and planetary landers. The MDP achieves high vacuum coupled to a ruggedized diaphragm rough pump. Instead of the relatively complicated rotor and stator blades used in turbomolecular pumps, the rotor in the MDP consists of a simple, smooth cylinder of aluminum. This will turn at approximately 200,000 rpm inside an outer stator housing. The pump stator comprises a cylindrical aluminum housing with one or more specially designed grooves that serve as flow channels. To minimize the length of the pump, the gas is forced down the flow channels of the outer stator to the base of the pump. The gas is then turned and pulled toward the top through a second set of channels cut into an inner stator housing that surrounds the motor. The compressed gas then flows down channels in the motor housing to the exhaust port of the pump. The exhaust port of the pump is connected to a commercially available diaphragm or scroll pump.

Sorensen, Paul↗
NASA NTRS1985

Identification and properties of molecular systems of potential use in solar-pumped lasers

The concepts and computational tools of theortical chemistry are used to investigate molecular properties needed in direct solar-pumped lasers. Compounds of the type RR'CXY, with R and R' organic groups, and X and Y halide atoms were identified as likely candidates because of their highly enhanced absorption coefficients over compounds with a single halide atom. The use of a combination of vibrational excitation followed by electronic excitation to enhance quantum yields at certain wavelengths is indicated. A self-consistent eikonal approximation to state-to-state transitions was tested for CH3I and is useful for other problems involving electronic energy and charge transfer. An approach to calculate potential energy surfaces and transition dipoles was developed which is based on the generation of eigenstates of the nonrelativisitc Hamiltonian followed by incorporation of the spin-orbit coupling by configuration interaction.

Micha, D. A.↗
NASA NTRS1986

Molecular-Beam Chopper and Four-Channel Amplifier

Molecular-beam chopper phase controller and timing interface is subsystem of four-stage, differentially pumped, modulated molecular-beam/mass spectrometer. Subsystem maintains accurate phase control and timing for repetitive signal averaging over several hours of operation. Chopper phase controller/ timing interface and four-channel programable time-multiplexed amplifier provide substantial improvements in attainable signal-to-noise ratio, detection limit, and accuracy of molecular-beam/mass-spectrometer system.

Adams, B. R.↗
NASA NTRS1977

Excimer lasers

The results of a two-year investigation into the possibility of developing continuous wave excimer lasers are reported. The program included the evaluation and selection of candidate molecular systems and discharge pumping techniques. The K Ar/K2 excimer dimer molecules and the xenon fluoride excimer molecule were selected for study; each used a transverse and capillary discharges pumping technique. Experimental and theoretical studies of each of the two discharge techniques applied to each of the two molecular systems are reported. Discharge stability and fluorine consumption were found to be the principle impediments to extending the XeF excimer laser into the continuous wave regime. Potassium vapor handling problems were the principal difficulty in achieving laser action on the K Ar/K2 system. Of the four molecular systems and pumping techniques explored, the capillary discharge pumped K Ar/K2 system appears to be the most likely candidate for demonstrating continuous wave excimer laser action primarily because of its predicted lower pumping threshold and a demonstrated discharge stability advantage.

Palmer, A. J.↗