Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MOFs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Understanding MOF Gas Entrapment Through Modeling

Metal organic frameworks (MOF) were created for the capture of noble gases (NG). They were tested to see which would be the most efficient and selective. MOFs are synthetic materials that are used in a variety of purposes: gas separations, catalysis reactions, drug delivery, and gas storage. In a previous study, there was an extremely long retention time of NG within the Ca-MOF material. Between 30-65 % of the NG was never recovered even under vacuum and at 150 °C. An understanding of this retention at a fundamental level is needed for utilizing the MOF material in industry or other applications

Metal organic frameworks↗
DOE OSTI2025

Metal-Organic Frameworks (MOFs) Containing Frustrated Lewis Pairs (FLP) for H 2 Storage at Ambient Temperature

This final technical report summarizes the key accomplishments of the HyMarc Seedling project to develop new materials based on metal-organic framework (MOF) incorporated with frustrated Lewis pairs (FLP) termed as FLP@MOF, as next-generation of hydrogen storage sorbent that can meet or exceed DOE’s 2025 performance target of hydrogen storage gravimetric density of 5.5 wt.% and volumetric density of 0.040 kg H 2 /L. The project was carried out by the PI Shengqian Ma at the University of North Texas (UNT) along with Argonne National Laboratory (ANL) to develop FLP@MOF systems that exhibit high hydrogen storage capacity at ambient temperature under pressure <100 bar, as well as to obtain improved fundamental understanding of hydrogen adsorption mechanism in FLP@MOF system.

08 HYDROGEN↗
DOE OSTI2024

Trace Adsorptive Removal of PFAS from Water by Optimizing the UiO‐66 MOF Interface

Abstract The confluence of pervasiveness, bioaccumulation, and toxicity in freshwater contaminants presents an environmental threat second to none. Exemplifying this trifecta, per‐ and polyfluoroalkyl substances (PFAS) present an alarming hazard among the emerging contaminants. State‐of‐the‐art PFAS adsorbents used in drinking water treatment, namely, activated carbons and ion‐exchange resins, are handicapped by low adsorption capacity, competitive adsorption, and/or slow kinetics. To overcome these shortcomings, metal–organic frameworks (MOFs) with tailored pore size, surface, and pore chemistry are promising alternatives. Thanks to the compositional modularity of MOFs and polymer–MOF composites, herein we report on a series of water‐stable zirconium carboxylate MOFs and their low‐cost polymer‐grafted composites as C 8 –PFAS adsorbents with benchmark kinetics and “parts per billion” removal efficiencies. Bespoke insights into the structure–function relationships of PFAS adsorbents are obtained by leveraging interfacial design principles on solid sorbents, creating a synergy between the extrinsic particle surfaces and intrinsic molecular building blocks.

Ilić, Nebojša↗
DOE OSTI2026

Commutative Algebra Modeling in Materials Science – A Case Study on Metal–Organic Frameworks (MOFs)

Metal-organic frameworks (MOFs) are a class of important crystalline and highly porous materials whose hierarchical geometry and chemistry hinder interpretable predictions in materials properties. Commutative algebra is a branch of abstract algebra that has been rarely applied in data and material sciences. We introduce the first ever commutative algebra modeling and prediction in materials science. Specifically, category-specific commutative algebra (CSCA) is proposed as a new framework for MOF representation and learning. It integrates element-based categorization with multiscale algebraic invariants to encode both local coordination motifs and global network organization of MOFs. These algebraically consistent, chemically aware representations enable compact, interpretable, and data efficient modeling of MOF properties such as Henry’s constants and uptake capacities for common gases. Compared to traditional geometric and graph-based approaches, CSCA achieves comparable or superior predictive accuracy while substantially improving interpretability and stability across data sets. By aligning commutative algebra with the chemical hierarchy, the CSCA establishes a rigorous and generalizable paradigm for understanding structure and property relationships in porous materials and provides a nonlinear algebra-based framework for data-driven material discovery.

Khaemba, Caleb S.↗
DOE OSTI2024

Predicting Partial Atomic Charges in Metal–Organic Frameworks: An Extension to Ionic MOFs

Molecular simulation is an invaluable tool to predict and understand the usage of metal–organic frameworks (MOFs) for gas storage and separation applications. Accurate partial atomic charges, commonly obtained from density functional theory (DFT) calculations, are often required to model the electrostatic interactions between the MOF and adsorbates, especially when the adsorbates have dipole or quadrupole moments, such as water and CO 2 . Machine learning (ML) models have been previously employed to predict partial charges and avoid the computational cost associated with DFT calculations. However, previous ML models suffer from small training data sets, which limit their scope of application. In this work, we introduce two novel machine learning models, PACMOF2-neutral and PACMOF2-ionic, aimed at predicting the density-derived electrostatic and chemical (DDEC6) partial atomic charges for both neutral and ionic MOFs. These models not only yield DFT-level accuracy at a fraction of the computational cost but also demonstrate a remarkable improvement in prediction of adsorption, as validated with grand canonical Monte Carlo simulations. Furthermore, the robustness and fast computational time of the PACMOF2 models, along with their transferability to other porous materials such as covalent organic frameworks and zeolites, underscores their potential in high-throughput screening of MOFs for diverse applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Charge Transfer and Recombination Pathways through Fullerene Guests in Porphyrin-Based MOFs

Porphyrin-based metal–organic frameworks (MOFs) offer a unique platform for building porous donor–acceptor networks that exhibit long-lived charge separation and transport upon incorporation of electron acceptor guest species. Here, in this work, porphyrin-based MOFs, PCN-222(H 2 ) and PCN-222(Zn), synthesized as nanoparticle suspensions, are successfully infiltrated with fullerene acceptor molecules, C 60 or PC 61 BM, in both polar and nonpolar solvent environments. The location and relative binding strength of these guest species are evaluated through a combination of N 2 physisorption measurements, photoluminescence quenching, and UV–vis absorption titration experiments. Semiempirical tight binding calculations are used to screen potential locations of the fullerene guest within the MOF pores, and hybrid density functional theory (DFT)-computed interaction energies confirm the energetically favorable positions. The fundamental photophysics of these donor–acceptor host–guest combinations are probed using ultrafast transient absorption spectroscopy. Sub-picosecond electron transfer involving initial exciplex population is observed, with slow charge recombination lifetimes on the order of τ ~1 ns for all systems in both dimethylformamide and 1,4-dioxane. Charge recombination occurs through population of fullerene and/or framework porphyrin triplet states depending on the porphyrin metalation status. The photophysics of the fullerene-loaded MOFs are discussed in the context of relevant porphyrin–fullerene donor–acceptor molecules to highlight the unique role of the framework environment in dictating photoinduced electron transfer and decay pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Uniting Theory and Experiment to Deliver Flexible MOFS for Superior Methane (NG) Storage

The objective of the project was to use previous insights developed through synthesis and quantitative modeling of rigid metal–organic frameworks (MOFs) in an established synergistic theoretical/experimental team to create, modify, and evaluate flexible MOFs (FlexMOFs) for natural gas (NG) storage and release at practically useful pressures and transform the NG storage economy. The goal was reduced pressure absorbed natural gas (ANG) FlexMOF storage at operating pressures less than 100 bar with physisorption exploiting the favorable thermodynamics and kinetics of flexible porous material opening in response to adsorption. Hydrogen behavior in this context was also considered. The specific aim of the project was to design and develop a standard computational modeling methodology for, first, detailed atomistic retrodiction of FlexMOF gating behavior and ultimately prediction of the effects of functionalization and/or substitution on structural transitioning. The project was also geared towards the establishment of the interaction of methane with the framework and binding sites using modeling and the FlexMOF will be both internally and external validated as a SMART metric. This has value to the scientific community both from the obvious standpoint of providing a better understanding of the promising test case systems (CdIF-13 and the MIL-53(Al) series of MOFs), but also in providing an avenue of obtaining insight into these FlexMOF systems in general, which is of particular interest given the tendency of structure-function correlation to lag behind synthesis methodology (making the latter a hit or miss proposition for applications). This gap remains significant for FlexMOF systems whose gate opening behaviors complicate computational examination. The computational methodologies are relatively inexpensive in terms of both money and computational resources enhancing the general viability of these methodologies. The ultimate gain to the public will be in the application of these techniques to design systems for natural gas storage and use to cut down on green-house emissions.

03 NATURAL GAS↗
DOE OSTI2025

Review of the potential and challenges of MOF-based adsorption heat pumps for sustainable cooling and heating in the buildings

Heat pumps are regarded as the most suitable means to meet the future demand of heating and cooling in the building, as they require small input of electrical energy and output high thermal energy. Vapor compression heat pump (VCHP) and transcritical-CO 2 heat pump are the two major heat pump technologies currently dominating the market. However, VCHP system suffers from its fugitive emission of hydrofluorocarbon (HFC) refrigerants, and transcritical-CO 2 system requires high operating pressure (typically 9–13 MPa). For low-to-medium temperature heating and cooling applications thermally driven adsorption heat pump (AHP) provides a better alternative to VCHP and transcritical-CO 2 system as AHP uses natural refrigerants and operates at a much lower pressure. But currently available AHP technology has the limitation of low coefficient of performance (COP). Advances in synthesizing metal-organic frameworks (MOF) with high gas adsorption capacity have created an opportunity to address the problem of low COP of current AHP technology. Here, this article reviews the progress made in the past decade in utilizing MOF and conventional adsorbents with different working fluids in AHP technology and compares their performance. The article also summarizes the key challenges for the MOF-based AHP technology and provides the authors’ perspective to address these challenges.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Flexible MOFs as Pressure-Tunable Filters for Hydrocarbon Separation

Metal–organic frameworks (MOFs) hold significant promise for separating gas mixtures, especially hydrocarbons. While the main focus in the field is the development of new adsorbents for specific separations of binary mixtures, a preferable situation would be using a single framework for separating various species. This has been achieved in some flexible MOFs, where ternary mixtures can be separated at different temperatures. Here, we propose a simple yet fascinating way of utilizing the flexibility of MOFs to create tunable filters as a function of external pressure. We thus replace the more costly temperature-driven tunability with a cost-efficient external-pressure tunability. As a proof-of-concept, we select the CaMOF flexible framework for C6 hydrocarbon separation, however, our results are applicable to other flexible framework and gas molecules. Furthermore, our findings provide mechanistic insight and guidelines to engineer separation filters by designing flexible pores with critical sizes that can be effectively manipulated by external pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Examining Metal Identity and Proximity Effects on Acetylene Hydrogenation with Azolate-Based MOFs

Liquid organic hydrogen carriers (LOHCs) are an attractive fuel source due to their compatibility with existing transportation methods and ease of use. However, they suffer from sluggish (de)hydrogenation kinetics. One promising platform for developing next-generation catalysts is metal–organic frameworks (MOFs), which can enable systematic interrogation into the influence of metal identity and spatial arrangement. In this study, the effect of the coordination environment was investigated using Ni- and Co-based azolate MOFs: MFU-4l-OH (M x Zn 5–x (OH) 4 (BTDD) 3 ; x = 4 for M = Co and x = 3 for M = Ni, H 2 BTDD = bis(1H-1,2,3-triazolo[4,5-b][4′,5′-i])dibenzo[1,4]dioxin), composed of single-site nodes, and M(OH) 2 BBTA (M = Ni, Co; H 2 BBTA = 1H,5H-benzo(1,2-d:4,5-d’)bistriazole), composed of extended chain-type nodes. The catalysts were characterized by isotherms, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and X-ray photoelectron spectroscopy (XPS) analysis. Acetylene hydrogenation activity under steady state conditions (150 °C, 1:1 C 2 H 2 :H 2 ) revealed higher turnover frequencies (TOFs) up 1.17 × 10 –2 mol C 2 H 2 mol −1 Ni min −1 and 1.98 × 10 –3 mol C 2 H 2 mol −1 Co min −1 for Ni-MFU-4l-OH and Co-MFU-4l-OH, respectively, compared to their BBTA analogues. However, the Co-based MOFs, particularly Co 2 (OH) 2 -BBTA, exhibited greater selectivity (up to 19%) for the fully hydrogenated ethane product. Isosteric heat of adsorption (Q st ) measurements for ethylene and ethane revealed that the BBTA framework had stronger binding to the products than MFU-4l. Furthermore, these findings demonstrate that metal identity and coordination environment may modulate acetylene hydrogenation performance, leading to design principles for tuning LOHC hydrogenation catalysts.

catalysts↗
DOE OSTI2025

In Situ MOF Pyrolysis Construction of Hierarchical Porous Co‐Nanoparticles/Carbon Cloth Composites for Enhanced Electromagnetic Wave Shielding and Absorption

The development of high-performance electromagnetic protection materials integrating broadband absorption and effective shielding capabilities is hindered by challenges in simultaneously optimizing multiple electromagnetic properties through conventional material designs. This study pioneers a hierarchical porous Co nanoparticle/carbon cloth (Co/CC) composite via controlled annealing of a Co-MOF precursor on carbon cloth. The Co-MOF served a dual role as both magnetic source and pore-forming agent, enabling in situ generation of uniformly dispersed Co nanoparticles and creation of abundant pores/interfaces on the CC fibers during pyrolysis. This unique architecture synergistically enhanced dielectric loss (via interfacial/dipolar polarization) and magnetic loss (via natural resonance, exchange interactions, and eddy currents), significantly improving impedance matching. The hierarchical pores further functioned as integrated “absorption–reflection” units for efficient electromagnetic energy attenuation. Consequently, the Co/CC composite annealed at 800°C (Co/CC-800) achieves minimum reflection loss (−40.69 dB) and 120% effective absorption bandwidth extension (6.16 GHz) as a filler, and exhibits superior electromagnetic interference shielding effectiveness (46.66 dB) as an integrated component. Significantly, Co/CC-800 demonstrated robust photothermal and electrothermal conversion capabilities, ensuring operational stability in ice-covered and humid harsh environments. This work pioneers a pore-structure-mediated strategy to harmonize dielectric–magnetic synergy, providing a new paradigm for designing advanced multifunctional electromagnetic protection materials.

dielectric‐magnetic synergy↗
DOE OSTI2024

Exploring the Computational Aspects of Propylene Oligomerization Catalysis Using M′ 2 M Type Trimetallic MOF Nodes

Metal-organic frameworks have emerged as promising materials in the field of catalysis. They offer an optimal ground for screening catalysts and tailoring their catalytic properties. Here, in this work, via density functional theory (DFT) calculations, we investigated the catalytic activity of the trimetallic MOF nodes, M' 2 M for propylene oligomerization, by varying the active metal M from Sc to Cu with M' being Fe, aiming to grasp the impact of altering the active atoms on the catalyst's activity. Additionally, we examined how substituting the spectator atom, M', with other transition metals, i.e., from Sc to Cu, affects these energy barriers, keeping Ni as the active metal. We proposed several cases with lower or comparable energy barriers to the experimentally reported Fe 2 Ni trimetallic MOF node. In addition, we found a correlative relationship between spin-density from natural population analysis and energy barriers in the realm of C-C bond formation, whereby an elevation in spin-density is found to be inversely proportional to the magnitude of the energy barriers. Moreover, we calculated the energy barriers for C-C coupling and beta-hydride elimination using multireference NEVPT2 calculations on top of the CASSCF wave function to validate the rate-determining step that is predicted by DFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural Templation of MOF-Derived Zirconia Nanoparticles

Templated synthesis is an important avenue for the development and synthesis of porous materials, as it provides a high level of control over the resulting structure. However, this control is difficult to achieve at the atomic level for poorly crystalline or noncrystalline materials, such as metal–organic framework (MOF)-derived carbons. We report the carbonization of three zirconium-based MOFs with different framework and inorganic building unit structures to form zirconia nanoparticles in a carbon matrix. Using a combination of X-ray diffraction, X-ray total scattering, and transmission electron microscopy, we found that the extended Zr-oxo chains of MIL-140C-bpy facilitate the formation of larger and more ordered zirconia nanoparticles. In contrast, the discrete Zr 6 -oxo clusters of UiO-67-bpy and Zr-ABTC result in smaller and differently structured nanoparticles.

metal-organic framework↗
DOE OSTI2025

Single-Electron Transfer Stabilizes Metastable Alane in a Bipyridine-Functionalized MOF Nanopore

Nanoconfinement of metastable hydrides such as alane (AlH 3 ) in functionalized porous frameworks represents a promising yet largely untapped strategy for high-capacity energy storage. Despite its potential, the underlying mechanisms responsible for the thermodynamic stabilization of metastable hydrides are poorly understood. Here, in this study, concepts from solution Lewis acid–base chemistry were applied to a crystalline metal–organic framework (MOF) to stabilize AlH 3 . The long-range order and synthetically versatile pore chemistry enabled us to reveal the intimate details of the hydride-host interactions. Powder X-ray diffraction (PXRD) of AlH 3 -infiltrated UiO-67bpy (Zr 6 O 4 (OH) 4 (bpydc) 6 ; bpydc 2– = 2,2′-bipyridine-5,5′-dicarboxylate) confirms that the framework maintains its crystallinity up to 250 °C and is stable under 70 MPa H 2 pressure. We find that thermodynamic stabilization arises from coupled single-electron and hydrogen-atom transfer from AlH 3 to bipyridine-containing linkers. Electron paramagnetic resonance detects a bipyridyl radical with an anisotropic g-tensor (g values of 2.00132, 2.00215, and 2.00275), consistent with Bader charge analysis predicting 0.82 e – transferred from the hydride to the MOF. These findings establish critical structure–property relationships underpinning AlH 3 stabilization and suggest general strategies for tuning the thermodynamics and kinetics of metastable materials.

Shivanna, Mohana [Sandia National Laboratories (SN↗
DOE OSTI2026

Photocatalytic Ammonia Synthesis using Fe-Based MOFs: The Role of Ligand Functionalization

Photocatalytic ammonia (NH 3 ) synthesis offers a carbon-neutral alternative to the Haber−Bosch process, which generates 42 million metric tons of CO 2 equivalent emissions annually. However, solar-to-ammonia conversion with contemporary photocatalysts remains far from practical requirements, and understanding the limiting factors in systems with well-defined active sites is crucial. Here, we show how the μ 3 -oxo-centered trinuclear Fe cluster in MIL-101(Fe) functions as the catalytic motif for N 2 -to-NH 3 conversion through combined experimental and computational investigations. Comparative studies with a molecular analogue demonstrate that the cluster is stabilized within the MOF framework, sustaining redox cycling and maintaining high catalytic activity. We systematically functionalized the dicarboxylate ligands of MIL-101(Fe) with −NH 2 , −Br, −NO 2 , −F, and −CF 3 to probe how ligand chemistry modulates Fe electron density, N 2 adsorption capacity, and proton availability, correlating these properties with catalytic performance using spectroscopic and surface characterization techniques alongside timeresolved infrared to assess excited-state lifetimes. F-functionalization optimally balances N 2 activation, proton availability at Fe active sites, and excited-state lifetimes, boosting NH 3 production by ∼ 60% relative to unmodified MIL-101(Fe). This study of ligandfunctionalized MIL-101(Fe) MOFs uncovers the underlying structure-activity relationships and advances design principles for solardriven NH 3 synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Node Distortions as a Means of Defect Engineering in Zr-Based MOFs

Defect engineering in Zr-based metal–organic frameworks (Zr-MOFs) has focused primarily on missing-linker defects. However, recent studies suggest that node dehydroxylation–which creates distortions and coordinatively unsaturated Zr sites (Zr cus )–may have a more significant impact on properties. The present work uses pair distribution function (PDF) and thermogravimetric analysis coupled with systematic defect manipulation to study the effect of node dehydroxylation and missing-linker defects in UiO-66. By employing rapid heat treatment (RHT) under humid flow, we tracked the transition from high-symmetry [Zr 6 O 4 (OH) 4 ] 12+ to distorted [Zr 6 O 6 ] 12+ nodes. This structural evolution significantly improves As(V) uptake, whereas increasing the number of missing linkers–via chemical treatment or RHT of mixed-ligand frameworks–fails to enhance performance. Crucially, our detection of distorted nodes in as-synthesized UiO-66 also raises the possibility that these defects were silently present in many earlier studies that span various applications, where their role in governing performance may have been inadvertently overlooked. The present study challenges the prevailing “missing-linker” paradigm and establishes cluster dehydroxylation as a defect-engineering strategy to enhance Lewis-acidic performance in Zr-MOFs.

Adsorption↗
DOE OSTI2025

Towards Mitigating Electron Beam-Induced Damage in MOFs Using Low Dose Electron Microscopy for In-Situ Room-Temperature Measurements

Metal-Organic Frameworks (MOFs) have emerged as a versatile class of materials with applications in gas storage and separation, catalysis, and drug delivery [1]. Understanding their damage mechanisms in under various environmental conditions is crucial for optimizing performance and stability [2]. This study employs a combination of Length Structural Coherence (LSC) analysis in electron scattering and Electron Energy Loss Spectroscopy (EELS) to elucidate the damage mechanisms in two representative MOFs. MIL101(Fe), and MIL101(Cr). Here, the primary objective is to reveal structural and chemical changes that occur under electron beam irradiation in Scanning Transmission Electron Microscopy (STEM), both in the pristine state and during in-situ CO and CO 2 adsorption. By combining LSC in Radial Distribution Function (RDF) analysis with EELS, comprehensive insights into the nanoscale alterations are obtained and correlated to the electron dose rate.

dos Santos, Gabriel T. [Northwestern University, E↗
DOE OSTI2025

High-current-density electrosynthesis of formate from captured CO 2 solution by MOF-derived bismuth nanosheets

Greenhouse gas emissions present a significant challenge to humanity, and utilizing renewable electricity to convert emitted CO 2 into value-added products offers a promising solution; however, traditional CO 2 capture and regeneration processes remain energy-intensive, restricting the overall system efficiency and decarbonization efficacy. In this study, an advanced direct reduction of captured CO 2 with large current densities for formate electrosynthesis was demonstrated without the need for CO 2 regeneration or compression. The bismuth nanosheet (DRM-BiNS) was synthesized by direct reduction of a Bi-based MOF, representing a new class of catalytic materials with a large surface area and interconnected pores, suitable for the direct reduction of captured CO 2 . By seamlessly combining experimentation and simulation, insights into the structure-parameter-performance relation were acquired in a flow cell setting, including critical membrane-electrode distance, cell orientation, and pumping flow rate. Important flow-cell components, such as catholyte volume, electrode substrate, membrane choice, and ionomer type, were also carefully examined to enhance the cell performance. In sharp contrast to prior studies limited to current densities below 20 mA/cm 2 in bicarbonate-based captured CO 2 solutions, this work demonstrates a remarkable current density of 300 mA/cm 2 with an FE to formate comparable to the case with gas-fed CO 2 reduction. Moreover, the process sustained an FE above 50% at a high current density of 500 mA/cm 2 . The DRM-BiNS catalyst exhibited outstanding selectivity, activity, and stability, significantly outperforming oxide-derived bismuth nanosheets (OD-BiNS) in captured CO 2 reduction. Furthermore, these findings offer critical insights into the development of sustainable and scalable CO 2 utilization technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗