Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METEOROIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Multi‐Sensor Trajectory Reconstruction of the 24 April 2025 Alaska Fireball and Implications for Planetary Defense

On 24 April 2025 at 18:30:57 UTC, a bright daytime fireball over Southcentral Alaska was detected by 37 seismic stations, 16 single infrasound sensors, and four infrasound arrays, yielding 30 ballistic and multiple fragmentation arrivals. Here, the unprecedented density of seismoacoustic coverage enabled detailed reconstruction of the event using acoustic signals, with fragmentation source locations further guiding the identification of Doppler weather radar signatures of a meteorite fall. Incorporation of a radar-derived terminal point yielded a final trajectory solution, which agreed closely with an independent optical trajectory solution from video analysis. The reconstructed entry parameters from seismoacoustic analysis indicate a velocity of 25.3 km/s, an entry angle of 19°, and an energy release of ∼38 t TNT equivalent. Assuming a chondritic composition, the pre-entry object diameter was ∼0.7 m. Using orbital parameters from the optical solution, we estimate meteoroid composition as most likely an L-type ordinary chondrite. The event occurred in the sub-Arctic, where space-based optical systems face challenges in detection, demonstrating the critical role of dense ground-based seismoacoustic networks in characterizing high-latitude atmospheric entries. This uniquely well-recorded event demonstrates the capability of dense seismoacoustic networks to constrain bolide trajectories, energetics, and fragmentation, with radar and optical data providing critical confirmation and complementary perspectives. These results bridge the methodological gap between planetary-defense monitoring of natural impactors and space-traffic analyses of artificial reentries, illustrating how multi-sensor integration can deliver calibration-grade trajectories even for unpredicted events.

Fireball↗
DOE OSTI2024

Experiments and Simulations of the Dusty Properties of Hypervelocity Impact Plasmas

Hypervelocity impacts, referring to impacts occurring at several times the speed of sound in the target, result in inertial stresses greatly exceeding the material strength and produce behavior that is not fully understood. These impact phenomena are seen in space through impacts of orbital debris and meteoroids on spacecraft and airless natural bodies but can also be produced in laboratory environments using light-gas guns and electrostatic dust accelerators. When a hypervelocity impact occurs, plasma is generated both from thermal ionization and from pressure ionization, producing a wide range of plasma densities depending on the impactor’s velocity. This plasma is initially formed in the warm dense matter (WDM) regime and governed by high energy density (HED) hydrodynamics before it rapidly expands and dissipates, spanning many orders of magnitude in density and length scale. The plasma can also contain a dust component, which is particularly relevant for the lower-velocity range of hypervelocity impacts with parameters that are particularly relevant to Tokamak plasmas. Therefore, the properties and dynamics of these plasmas cannot be fully characterized without considering dusty plasma effects, which are ubiquitous but poorly understood.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Hypervelocity impact flash expansion geometry under various spacecraft surface electrical conditions

A more congested space environment due to increasing space activities introduces new threats to spacecraft operators. Among these threats include hypervelocity impacts from microparticles (< 1 µg) in the form of meteoroids and space debris. These microparticles travel at speeds between 11.2 and 72.8 km/s with respect to the Earth and can impact spacecraft forming a small (~1 µm) and dense (~ 10 26 m -3 ) plasma. This plasma can generate a strong optical emission (impact flash) and a radio frequency (RF) emission. These emissions can lead to spacecraft electrical anomalies when the impacted spacecraft surface (target) carries high electrical potential due to various space weather effects. To understand the microparticle hypervelocity impact plasma and its associated threat to spacecraft electronics, we studied the hypervelocity impact flash expansion geometry under various spacecraft surface electrical conditions. Three high-speed broadband photomultiplier tubes (PMT) are used to capture the temporal evolution of the impact flash and the temporal evolution of the angular distribution of the impact flash expansion geometry in a 3 MV electrostatic dust accelerator during a ground-based experiment. Overall, results indicate that the impact surface electrical condition has a statistically significant influence on the impact flash geometry, and a strong similarity between the impact plasma and flash expansion geometry. Thus, this paper provides new experimental support for the impact flash origin from and connection with the impact plasma, and serves as the first impact flash expansion geometry characterization under various impact surface electrical conditions in a collisionless environment (< 10 -5 Torr).

42 ENGINEERING↗
DOE OSTI2022

Plasma production and composition from hypervelocity impacts on solar cell cover glass

Satellites are subjected to detrimental effects from the space environment, including impacts by orbital debris and meteoroids that can cause mechanical or electrical damage. While mechanical damage is well studied, electrical effects resulting from hypervelocity impact (HVI) remain poorly understood. In HVIs, where the projectile speed exceeds the speed of sound in the target material, the impact energy ionizes the material near the surface, creating a plasma that can cause radio frequency emission. This emission is the main source of electrical anomalies in satellites, but the mechanism behind its creation is still unknown. Ground-based experiments have been used to characterize HVI plasma, including the empirical power law relations that describe the impact charge produced as a function of impactor mass and speed. Quantifying these power law relations gives us a better understanding of the species formed in the impact which can eventually lead to plasma evolution models and help us first, understand the mechanism behind radio frequency emission and second, ways to prevent its damage to the satellites. In this paper, we interpret the results of the HVI experiments on solar cell coverglass targets and identify the potential chemical or molecular reactions that form the impact ion species. This is done by looking simultaneously at multiple data sets for different species within the same impact configuration, and using a new technique for quantifying the power law relations for each emitted species. We use time of flight analysis (TOF) to detect the charged particle compositions and determine their initial speeds. The results suggest that the charge production power law is species specific, with different formation mechanisms involved in a single HVI event, some of which are associated with dissociation and some with ionization of a molecule. Furthermore, our results also show that electrons have different power laws that depend on the spacecraft surface charge. TOF measurements of ions from impact events on solar cell cover glass shows the presence of SiO + and SiO – 2 as the dominant species present in plasmas on positively and negatively charged targets, respectively, as well as the formation of FeO + .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Preliminary study of radio frequency waves in hypervelocity impact plasma

Orbital debris and meteoroids can cause mechanical and electrical anomalies by impacting spacecraft. Although mechanical damage tends to occur only from particles with masses >10 –3 g, electrical damage can be a result of hypervelocity (> 10 km/s) impacts (HVI) even with smaller particles. In HVI, the projectile speed exceeds the speed of sound in the material and has enough energy to create plasma by ionizing the material near the surface, which can then emit radio frequency (RF) waves. In this paper, we conduct a preliminary study on the characteristics of impact-generated RF emission with the ultimate goal of building an RF predictive model for risk assessment of HVI electrical effects that can damage spacecraft. First, we introduce wavelet analysis as a method for denoising and quantifying the total RF signal energy. An appropriate mother wavelet and the number of decomposition levels are selected using a synthetic signal. Second, the total energy of the RF emission is calculated using Parseval’s theorem. Results suggest that the total RF signal energy is proportional to the energy flux of the impactor. Lastly, spectrograms of the RF emission are analyzed to characterize features that can be used in the future to predict impacts that can cause electrical damage to satellites.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Observations on the deformation of metal microspheres in shock-driven polymer flows

We report that solid particles can be fragmented by a fast-moving fluid if their velocity difference is great enough, such as during the atmospheric entry of meteoroids or the shock compression of engineered particulate composites. The extent of particle deformation and breakup in such systems is poorly understood because the necessary extreme conditions make observation difficult and data scarce. To meet this need, experiments combining ultrafast synchrotron-based radiography with plate impact loading were performed at the dynamic compression sector at the advanced photon source. Metal microspheres of several densities and strengths (Au, Ta, and W) were placed inside a polymer matrix. A planar shock wave was then produced in the polymer by the impact of a gun-launched flyer plate. X-ray images of the resulting flow were collected at ~150ns intervals. These images document the progression of particle deformation across a range of flow conditions and particle materials. They show that the extent of deformation is sensitive to the ratio of drag stress to particle strength. The deforming particle's shape is determined by the initial shock–particle interaction, fluid stagnation pressure, and vorticity, each acting on its own timescale. A set of scaling relationships is presented to capture these observations and enable comparison with prior hydrodynamic data. The result is a framework for predicting the conditions under which strong particles are severely deformed by a shock-driven flow.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The fall, recovery, classification, and initial characterization of the Hamburg, Michigan H4 chondrite

Abstract The Hamburg meteorite fell on January 16, 2018, near Hamburg, Michigan, after a fireball event widely observed in the U.S. Midwest and in Ontario, Canada. Several fragments fell onto frozen surfaces of lakes and, thanks to weather radar data, were recovered days after the fall. The studied rock fragments show no or little signs of terrestrial weathering. Here, we present the initial results from an international consortium study to describe the fall, characterize the meteorite, and probe the collision history of Hamburg. About 1 kg of recovered meteorites was initially reported. Petrology, mineral chemistry, trace element and organic chemistry, and O and Cr isotopic compositions are characteristic of H4 chondrites. Cosmic ray exposure ages based on cosmogenic 3 He, 21 Ne, and 38 Ar are ~12 Ma, and roughly agree with each other. Noble gas data as well as the cosmogenic 10 Be concentration point to a small 40–60 cm diameter meteoroid. An 40 Ar‐ 39 Ar age of 4532 ± 24 Ma indicates no major impact event occurring later in its evolutionary history, consistent with data of other H4 chondrites. Microanalyses of phosphates with LA‐ICPMS give an average Pb‐Pb age of 4549 ± 36 Ma. This is in good agreement with the average SIMS Pb‐Pb phosphate age of 4535.3 ± 9.5 Ma and U‐Pb Concordia age of 4535 ± 10 Ma. The weighted average age of 4541.6 ± 9.5 Ma reflects the metamorphic phosphate crystallization age after parent body formation in the early solar system.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Correction and calibration of atmospheric impact observations in GOES GLM data

The Earth's atmosphere is impacted daily by both meteoroids and artificial objects. Calibrated observations of the emitted light at sufficiently high sampling rates can enable or improve the estimation of impactor attributes such as size, cohesion, trajectory, and composition, but are difficult to obtain owing to the unpredictability, brevity, and high dynamic (brightness) range of impacts. Ground-based camera systems have successfully monitored small regions of the atmosphere at video frame rates and with limited radiometric capabilities, but most impacts occur over the 70% of the Earth's surface covered by water and are therefore missed by these networks. The Geostationary Lightning Mapper (GLM) instruments aboard Geostationary Operational Environmental Satellites 16 and 17 provide near-hemispherical coverage at 500 frames per second. These data have been shown to contain the signatures of many independently confirmed impacts, often from both viewing angles simultaneously, and constitute an observational resource that is currently unparalleled in the public domain. NASA's Asteroid Threat Assessment Project has implemented an automated impact detection pipeline that processes data from GLM daily. Given a detected impact, the GLM data contain a wealth of information for use in quantitative follow-up analyses. However, impact events differ from lightning in ways that violate key assumptions built into GLM's design. The result is that GLM's onboard processing introduces errors into pixel observations of impact events and the calibrated energies near the periphery of the detector may be substantially overestimated. We present methods for mitigating these and other issues to produce a data product more suitable for impact analyses than the existing GLM lightning product.

58 GEOSCIENCES↗
DOE OSTI2025

Full‐Waveform Simulation of Infrasound Propagation in the Atmosphere: A Case Study of the 2023 April 20 SpaceX Starship Explosion

Infrasound, low‐frequency sound below 20 Hz, has been a key technology to monitor explosion events in the atmosphere. The International Monitoring System (IMS) of the Comprehensive Nuclear‐Test‐Ban Treaty Organization provides the means for continuous monitoring of infrasonic events worldwide. Infrasonic techniques for event location and size estimation can also complement other observational techniques for the detection and characterization of the entry of asteroids or large meteoroids. In this study, we describe the detection capability of IMS infrasound stations for an explosive event in the middle of the atmosphere. Full‐waveform simulations are performed with the specification of atmospheric conditions and incorporated into the event location and explosion yield estimation. We applied it to the 2023 April 20 SpaceX Starship explosion at 29 km altitude. Starship is a super heavy‐lift space vehicle constructed by SpaceX and known as the largest and most powerful rocket ever built. The Starship explosion created huge pressure disturbances in the atmosphere, and its infrasound was detected by the IMS arrays in North America between 2000 and 4000 km. Independent observational data and available ground‐truth information provide a rare opportunity to evaluate the monitoring capability of the IMS network for elevated sources in the atmosphere. We also demonstrate the capability of full‐waveform simulation for infrasound wavefield characterization and prediction to improve event location and yield estimation.

Geosciences↗
DOE OSTI2025

Array-Based Seismic Measurements of OSIRIS-REx’s Re-Entry

The return home of the OSIRIS-REx spacecraft in September 2023 marked only the fifth time that an artificial object entered the Earth’s atmosphere at interplanetary velocities. Although rare, such events serve as valuable analogs for natural meteoroid re-entries; enabling study of hypersonic dynamics, shock wave generation, and acoustic-to-seismic coupling. Here, in this study, we report on the signatures recorded by a dense (100 m scale) 11-station array located almost directly underneath the capsule’s point of peak atmospheric heating in northern Nevada. Seismic data are presented, which allow inferences to be made about the shape of the shock wave’s footprint on the surface, the capsule’s trajectory, and its flight parameters.

58 GEOSCIENCES↗
DOE OSTI2025

Along-Trajectory Acoustic Signal Variations Observed During the Hypersonic Re-Entry of the OSIRIS-REx Sample Return Capsule

The re-entry of the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) sample return capsule (SRC) on 24 September 2023 presented a rare opportunity to study atmospheric entry dynamics through a dense network of ground-based infrasound sensors. As the first interplanetary capsule to re-enter over the United States since Stardust in 2006, this event allowed for unprecedented observations of infrasound signals generated during hypersonic descent. We deployed 39 single-sensor stations across Nevada and Utah, strategically distributed to capture signals from distinct trajectory points. Infrasound data were analyzed to examine how signal amplitude and period vary with altitude and propagation path for a nonablating hypersonic object with well-defined physical and aerodynamic properties. Raytracing simulations incorporated atmospheric specifications from the ground-2-space model to estimate source altitudes for observed signals. Results confirmed ballistic arrivals at all stations, with source altitudes ranging from 44 to 62 km along the trajectory. Signal period and amplitude exhibited strong dependence on source altitude, with higher altitudes corresponding to lower amplitudes, longer periods, and reduced high-frequency content. Regression analysis demonstrated strong correlations between signal characteristics and both altitude and propagation geometry. Our results suggest, when attenuation is considered, the amplitude is primarily determined by the source, with the propagation path playing a secondary role over the distances examined. These findings emphasize the utility of controlled SRC re-entries for advancing our understanding of natural meteoroid dynamics, refining atmospheric entry models, and improving methodologies for planetary defense. The OSIRIS-REx SRC campaign represents the most comprehensive infrasound study of a hypersonic re-entry to date, showcasing the potential of coordinated geophysical observational networks for high-energy atmospheric phenomena, including space debris re-entries.

58 GEOSCIENCES↗
DOE OSTI2025

Computational Prediction of Infrasound Arrival Times and Directions from Stationary and Moving Impulsive Sources

This report addresses the need to predict infrasound signal arrival times and back azimuths at monitoring stations, enabling more focused and efficient searches within recorded waveform data. The primary challenge is estimating expected signal arrival windows for stationary and moving acoustic sources, such as chemical explosions, volcanic eruptions, meteoroids, and spacecraft re-entry events. To address this challenge, a reproducible methodology is described that uses simplified propagation speeds for boundary layer, tropospheric, stratospheric, and thermospheric atmospheric waveguides. While the Python source code itself is not freely available, this document provides detailed, step-by-step instructions, and equations enabling users to replicate and adapt the method independently. The method reliably predicts signal arrival intervals and back azimuths, thereby supporting rapid detection and accurate interpretation of infrasound events. Results demonstrate that this method effectively identifies plausible signal arrival intervals and directions, facilitating faster event detection and more reliable interpretation. This methodology directly supports atmospheric monitoring, planetary defense, and forensic analysis of explosive atmospheric events.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Final Technical Report for DoE award DE‐SC0023367 “Energetic Electron Transport in Magnetized Plasma with Magnetic Islands”

This project investigated how plasmas interact with energetic particles and solid materials under extreme conditions relevant to fusion energy, space plasmas, and planetary environments. Using experiments on the DIII-D National Fusion Facility, the research first examined how high-energy electrons move, become trapped, and are released in plasmas containing magnetic islands—structures commonly found in fusion reactors and Earth’s magnetosphere—providing new insight into particle transport and acceleration processes. The project also explored plasma-driven chemical reactions that can occur during meteoroid entry into planetary atmospheres, demonstrating that simple molecules such as ammonia can be produced and survive in high-temperature plasma conditions. Together, these results improve understanding of plasma behavior across laboratory, space, and planetary systems while informing fusion plasma control and plasma–material interaction studies. The project additionally contributed to workforce development by training graduate students, undergraduates, and early-career researchers and by disseminating results through peer-reviewed publications and international scientific conferences.

Orlov, Dmitri Mikhailovich [UC San Diego] (ORCID:0↗
DOE OSTI2024

Seismoacoustic measurements of the OSIRIS-REx re-entry with an off-grid Raspberry PiShake

Hypersonic re-entries of spacecraft are valuable analogues for the identification and tracking of natural meteoroids re-entering the Earth's atmosphere. We report on the detection of seismic and acoustic signals from the OSIRIS-REx landing sequence, acquired near the point of peak capsule heating and recorded using a fully off-grid Raspberry PiShake sensor. This simple setup is able to record all the salient features of both the seismic and acoustic wavefields; including the primary shockwave, later reverberations, and possible locally induced surface waves. Peak overpressures of 0.7 Pa and ground velocities of 2x10 -6 m/s yield lower bound on the air-to-ground coupling factor between 3 and 44 Hz of 1.4x10 -6 m/s/Pa, comparable to results from other re-entries.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

The OSIRIS-REx Sample Return Capsule re-entry: A coordinated seismo-acoustic observational campaign for the study of meteor phenomena

Objects entering Earth’s atmosphere at hypersonic velocities may generate powerful acoustic waves. Depending on atmospheric conditions and acoustic propagation paths, they may be captured using ground or balloon-borne microbarometers and microphones. Impacts into the Earth’s atmosphere by asteroids in a meter-size range are sporadic and unannounced, and thus, well-documented scientific observations of asteroids are rare and generally happen by chance. Arriving from interplanetary space at hypervelocity, spacecraft are considered analogues for low velocity meteoroids and asteroids impacting the Earth’s atmosphere, and as such provide unprecedented and unique opportunity to carry out planned observational campaigns and perform detailed studies of meteor phenomena. However, since the end of the Apollo era, only four instances of a hypersonic re-entry of an artificial body from interplanetary space with an incident speed of 11-12 km/s have been observed and studied. These were the Sample Return Capsules (SRCs) that brought physical samples of extraterrestrial material back to Earth (Genesis, Stardust, Hayabusa 1, Hayabusa 2). These re-entries were also detected by infrasound and/or seismic sensors. The next opportunity to observe an artificial meteor will be on 24 September 2023 with the re-entry of NASA’s OSIRIS-REx SRC that will bring samples of the carbonaceous near-Earth asteroid Bennu. The re-entry consists of several flight phases, including hypersonic and supersonic, providing a unique opportunity to observe these by infrasound and seismic sensors. We will discuss observational campaign efforts aimed to capture geophysical signals generated by the OSIRIS-REx SRC re-entry. This campaign utilizes an unparalleled number of instruments, both ground and airborne, strategically positioned in the immediate and extended region around the projected re-entry trajectory to maximize the scientific output.

47 - OTHER INSTRUMENTATION↗
DOE OSTI2025

Investigating the Relationship Between Bolide Entry Angle and Apparent Direction of Infrasound Signal Arrivals

Infrasound sensing offers critical capabilities for detecting and geolocating bolide events globally. However, the observed back azimuths, directions from which infrasound signals arrive at stations, often differ from the theoretical expectations based on the bolide’s peak brightness location. For objects with shallow entry angles, which traverse longer atmospheric paths, acoustic energy may be emitted from multiple points along the trajectory, leading to substantial variability in back azimuth residuals. This study investigates how the entry angle of energetic bolides affects the back azimuth deviations, independent of extrinsic factors such as atmospheric propagation, station noise, and signal processing methodologies. A theoretical framework, the Bolide Infrasound Back-Azimuth EXplorer Model (BIBEX-M), was developed to compute predicted back azimuths solely from geometric considerations. The model quantifies how these residuals vary as a function of source-to-receiver distance, revealing that bolides entering at shallow angles, e.g., 10°, can produce average residuals of 20°, with deviations reaching up to 46° at distances below 1000 km, and remaining significant even at 5000 km (up to 8°). In contrast, bolides with steeper entry angles, e.g., > 60°, show smaller deviations, typically under 5° at 1000 km and diminishing to less than ~1° beyond 5000 km. These findings attest to the need for careful interpretation when evaluating signal detections and estimating bolide locations. This work is not only pertinent to bolides but also to other high-energy, extended-duration atmospheric phenomena such as space debris and reentry events, where similar geometric considerations can influence infrasound arrival directions.

Acoustics↗
DOE OSTI2025

The formation and structure of iron-dominated planetesimals

Metal-rich asteroids and iron meteorites are considered core remnants of differentiated planetesimals and/or products of oxygen-depleted accretion. Investigating the origins of iron-rich planetesimals could provide key insights into planet formation mechanisms. Using differentiation models, we evaluate the interior structure and composition of representative-sized planetesimals (~200 km diameter), while varying oxygen fugacity and initial bulk meteoritic composition. Under the oxygen-poor conditions that likely existed early in the inner regions of the Solar System and other protoplanetary disks, core fractions remain relatively consistent across a range of bulk compositions (CI, H, EH, and CBa). Some of these cores could incorporate significant amounts of silicon (10–30 weight%) and explain the metal fractions of Fe-rich bodies in the absence of mantle stripping. Conversely, planetesimals forming under more oxidizing conditions, such as beyond snow lines, could exhibit smaller cores, enriched in carbon, sulfur (>1 wt%), and oxides. Sulfur-rich cores, like those formed from EH and H bulk compositions, could remain partly molten, sustain dynamos, and even drive sulfur-rich volcanism. Additionally, bodies with high carbon contents, such as CI compositions, can form graphitic outer layers. These variations highlight the importance of initial formation conditions in shaping planetesimal structures. Future missions, such as NASA’s Psyche mission, offer an opportunity to measure the relative abundances of key elements (Fe, Ni, Si, and S) necessary to distinguish among formation scenarios and structure models for Fe-rich and reduced planetesimals.

meteorites↗