Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Computational studies of metal-metal and metal-ligand interactions

Accurate calculations on the bond length, dipole moment, and harmonic frequency of CO are presented, using large basis sets and high levels of electron correlation. The geometric structure, force constants and binding energies of Cr(C0)6 and Cr(CO)5 are computed using large basis sets and high levels of electron correlation. The molecule 04(+) is studied, using large basis sets and high levels of electron correlation, including the CASSCF, CASSI and CASPT2 methods. Binding energies, geometries and frequencies are computed. Symmetry breaking is a particular problem for the antisymmetric stretch, which is addressed using the CASSI method. The symmetry breaking problem in 04(+) has also been studied using the Brueckner coupled cluster method. This gives results in good agreement with CASSI. A multi-region numerical integration scheme is investigated for use in Density Functional Calculations. This scheme is found to give comparable results to a widely used scheme based on the Euler-Maclaurin technique.

Barnes, Leslie A.↗
NASA NTRS1994

Computational studies of metal-metal and metal-ligand interactions

Accurate calculations on the bond length, dipole moment, and harmonic frequency of CO are presented, using large basis sets and high levels of electron correlation. The geometric structure, force constants and binding energies of Cr(CO)6 and Cr(CO)5 are computed using large basis sets and high levels of electron correlation. The molecule O4(+) is studied, using large basis sets and high levels of electron correlation, including the CASSCF, CASSI,and CASPT2 methods. Binding energies, geometries and frequencies are computed. Symmetry breaking is a particular problem for the antisymmetric stretch, which is addressed using the CASSI method. The symmetry breaking problem in O4(+) has also been studied using the Brueckner coupled-cluster method. This gives results in good agreement with CASSI. A multi-region numerical integration scheme is investigated for use in Density Functional Calculations. This scheme is found to give comparable results to a widely used scheme based on the Euler-Maclaurin technique.

Barnes, Leslie A.↗
NASA NTRS2003

The Parameterization of Solid Metal-Liquid Metal Partitioning of Siderophile Elements

The composition of a metallic liquid can significantly affect the partitioning behavior of elements. For example, some experimental solid metal-liquid metal partition coefficients have been shown to increase by three orders of magnitude with increasing S-content of the metallic liquid. Along with S, the presence of other light elements, such as P and C, has also been demonstrated to affect trace element partitioning behavior. Understanding the effects of metallic composition on partitioning behavior is important for modeling the crystallization of magmatic iron meteorites and the chemical effects of planetary differentiation. It is thus useful to have a mathematical expression that parameterizes the partition coefficient as a function of the composition of the metal. Here we present a revised parameterization method, which builds on the theory of the current parameterization of Jones and Malvin and which better handles partitioning in multi-light-element systems.

Chabot, N. L.↗
NASA NTRS2003

Diffusion of Siderophile Elements in Fe Metal: Application to Zoned Metal Grains in Chondrites

The distribution of highly siderophile elements (HSE) in planetary materials is controlled mainly by metal. Diffusion processes can control the distribution or re-distribution of these elements within metals, yet there is little systematic or appropriate diffusion data that can be used to interpret HSE concentrations in such metals. Because our understanding of isotope chronometry, redox processes, kamacite/taenite-based cooling rates, and metal grain zoning would be enhanced with diffusion data, we have measured diffusion coefficients for Ni, Co, Ga, Ge, Ru, Pd, Ir and Au in Fe metal from 1200 to 1400 C and 1 bar and 10 kbar. These new data on refractory and volatile siderophile elements are used to evaluate the role of diffusional processes in controlling zoning patterns in metal-rich chondrites.

Righter, K.↗
NASA NTRS1989

Alkali metal-refractory metal biphase electrode for AMTEC

An electrode having increased output with slower degradation is formed of a film applied to a beta-alumina solid electrolyte (BASE). The film comprises a refractory first metal M.sup.1 such as a platinum group metal, suitably platinum or rhodium, capable of forming a liquid or a strong surface adsorption phase with sodium at the operating temperature of an alkali metal thermoelectric converter (AMTEC) and a second refractory metal insoluble in sodium or the NaM.sup.1 liquid phase such as a Group IVB, VB or VIB metal, suitably tungsten, molybdenum, tantalum or niobium. The liquid phase or surface film provides fast transport through the electrode while the insoluble refractory metal provides a structural matrix for the electrode during operation. A trilayer structure that is stable and not subject to deadhesion comprises a first, thin layer of tungsten, an intermediate co-deposited layer of tungsten-platinum and a thin surface layer of platinum.

Williams, Roger M.↗
NASA NTRS1972

Recent materials compatibility studies in refractory metal-alkali metal systems for space power applications.

Advanced Rankine and other proposed space power systems utilize refractory metals in contact with both single-phase and two-phase alkali metals at elevated temperatures. A number of recent compatibility experiments are described which emphasize the excellent compatibility of refractory metals with the alkali metals, lithium, sodium, and potassium, under a variety of environmental conditions. The alkali metal compatibilities of tantalum-, columbium-, molybdenum-, and tungsten-base alloys are discussed.

Harrison, R. W.↗
NASA NTRS1984

Amorphous metallic films in silicon metallization systems

The general objective was to determine the potential of amorphous metallic thin films as a means of improving the stability of metallic contacts to a silicon substrate. The specific objective pursued was to determine the role of nitrogen in the formation and the resulting properties of amorphous thin-film diffusion barriers. Amorphous metallic films are attractive as diffusion barriers because of the low atomic diffusivity in these materials. Previous investigations revealed that in meeting this condition alone, good diffusion barriers are not necessarily obtained, because amorphous films can react with an adjacent medium (e.g., Si, Al) before they recrystallize. In the case of a silicon single-crystalline substrate, correlation exists between the temperature at which an amorphous metallic binary thin film reacts and the temperatures at which the films made of the same two metallic elements react individually. Amorphous binary films made of Zr and W were investigated. Both react with Si individually only at elevated temperatures. It was confirmed that such films react with Si only above 700 C when annealed in vacuum for 30 min. Amorphous W-N films were also investigated. They are more stable as barriers between Al and Si than polycrystalline W. Nitrogen effectively prevents the W-Al reaction that sets in at 500 C with polycrystalline W.

Nicolet, M. A.↗
NASA NTRS2001

Preparation of high density heavy metal fluoride glasses with extended ultraviolet and infra red ranges, and such high density heavy metal fluoride glasses

A heavy metal fluoride glass composition range (in mol percent) consisting essentially of: (16-30)BaF.sub.2.(8-26)HfF.sub.4.(6-24)InF.sub.3 or GaF.sub.3.(4-16)CdF.sub.2.(6-24)YbF.sub.3.(4-22)ZnF.sub.2. In an alternative embodiment, a heavy metal fluoride glass composition range (in mol percent) comprises (16-30)BaF.sub.2.(8-26)HfF.sub.4.(6-24) of (0-24)InF.sub.3, (0-24)GaF.sub.3 and (0-19)AlF.sub.3.(1-16)CdF.sub.2.(6-24)YbF.sub.3.(4-26)ZnF.sub.2. A preferred heavy metal fluoride glass produced in accordance with the present invention comprises a composition (in mol %) and comprises about 26BaF.sub.2.18HfF.sub.4.7InF.sub.3.5GaF.sub.3.10CdF.sub.2.18YbF.sub.3. 16ZnF.sub.2. A preferred heavy metal fluoride glass has maximum thickness of most preferably about 3 mm. Another preferred heavy metal fluoride glass comprises a composition (in mol %) and comprises about 26BaF.sub.2.18HfF.sub.4.12AlF.sub.3.10CdF.sub.2.18YbF.sub.3.16ZnF.sub.2.

Martin, Steven W.↗
NASA NTRS1973

Metal-oxide-metal point contact junction detectors

The detection mechanism(s) and design of a mechanically stable metal-oxide-metal point contact junction detector are considered. A prototype for a mechanically stable device has been constructed and tested. A technique has been developed which accurately predicts microwave video detector and heterodyne mixer SIM (semiconductor-insulator-metal) diode performance from low dc frequency volt-ampere curves. The difference in contact potential between the two metals and geometrically induced rectification constitute the detection mechanisms.

Baird, J.↗
NASA NTRS1974

Mesosiderites. I - Compositions of their metallic portions and possible relationship to other metal-rich meteorite groups

The metal from 17 mesosiderites has been analyzed for Ni, Ga, Ge, and Ir by the techniques of atomic-absorption spectrometry and neutron activation. Most mesosiderite metal samples fall in a narrow compositional range: Ni, 7.0-9.0%; Ga, 13-16 ppm; Ge, 47-58 ppm; and Ir, 2.4-4.4 ppm. Most of those falling outside these ranges belong to Powell's (1971) least-metamorphosed type. Mesosiderite metal falls in the same general composition range as IIIAB irons, IIIE irons, pallasites and H-group chondrite metal. There are distinct differences in detail, however, and firm evidence for a close genetic relationship between any of these groups and the mesosiderites is lacking.

Wasson, J. T.↗
NASA NTRS1976

Heat transfer analysis of metal hydrides in metal-hydrogen secondary batteries

The heat transfer between a metal-hydrogen secondary battery and a hydrogen-storing metal hydride was studied. Temperature profiles of the endothermic metal hydrides and the metal-hydrogen battery were obtained during discharging of the batteries assuming an adiabatic system. Two hydride materials were considered in two physical arrangements within the battery system. In one case the hydride is positioned in a thin annular region about the battery stack; in the other the hydride is held in a tube down the center of the stack. The results show that for a typical 20 ampere-hour battery system with lanthanum pentanickel hydride as the hydrogen reservoir the system could perform successfully.

Onischak, M.↗
NASA NTRS1985

Near-infrared two-color pyrometer for determining ignition temperatures of metals and metal alloys

A two-color pyrometer has been designed, constructed, and used to measure the ignition temperatures of metals and metal alloys. Cylindrical metal and metal alloy specimens were ignited by a focused cw CO2 laser beam in a cool, static, pure oxygen environment. The pyrometer operates in the near-infrared at two narrow spectral regions, with a nominal bandwidth of 10 nm centered at 0.9051 and 1.06 micron, and has a temperature range from 1000 to 4000 K. In the present design the temperature of a spot, about 0.5 mm in diameter, can be recorded with a maximum time resolution of 25 microseconds and with an accuracy of a few percent. Results of CO2 laser ignition of cylindrical specimens of 6061 aluminum alloy and 302 SS in a pure oxygen environment were obtained from the two-color pyrometer and were compared with those obtained from a thermocouple placed inside the specimen near the laser-irradiated surface.

Nguyen, K.↗
NASA NTRS1992

Stability of metal particle and metal particulate media

Metal particulate (MP) video tape was launched for 8 mm video tape in 1985. Since then MP tapes have been applied to several consumer formats and instrumental formats because of its superior electrical performance. Recently data storage media, such as DDS and D-8, have started employing MP tape. However, there are serious concerns with archival stability of MP tape particularly in the case of data storage use, as metal particles essentially have problems with chemical instability and are susceptible to oxidation and corrosion. Although there were some studies about the archival stability of metal particles or MP tapes, a clear understanding has yet to be reached. In this paper, we report the stability of magnetic properties of current metal particles, and then discuss the new technologies to improve the stability further.

Okamoto, Kazuhiro↗
NASA NTRS2004

Metallic Chondrules in NWA1390 (H3-6): Clues to Their History from Metallic Cu

A recent study of ordinary chondrites suggests that many long-recognized shock indicators in olivine and pyroxene minerals may be erased by post-shock annealing. Therefore, the presence of other indicators of shock, which can not be erased by subsequent heating, are important to fully characterize the history of chondritic meteorites. One such proposed indicator is metallic Cu, which occurs in at least 2/3 of ordinary chondrites. Here we present a comparative study of two metallic chondrules in the NWA1390 ordinary chondrite, both of which contain appreciable Cu in the Fe,Ni metal phase and one that is partially rimmed by metallic Cu.

LaBlue, A. R.↗
NASA NTRS2004

Solid Metal-Liquid Metal Partitioning of Pt, Re, and Os: The Effect of Carbon

If the measured Os isotopic ratios are a signature from the Earth's outer core, understanding them is a unique opportunity to understand more about the Earth's core. The distribution of elements between the Earth's solid inner core and the liquid outer core will depend on their solid metal-liquid metal partition coefficients (D). Solid metal-liquid metal partitioning data are loosely consistent with the needed fractionations between Re-Os and Pt-Os to account for the Os isotopic signature; D(Os) is greater than both D(Re) and D(Pt), and the magnitude of the partition coefficients are similar to those needed [e.g. 7, 8]. The pressure in the core, the composition of the core, and the crystal structure of the solid Fe alloy in the inner core may influence the specific values of the partition coefficients. It may thus be possible to use these sensitivities of the partition coefficients to gain insight into the conditions within the Earth's core. In this abstract, we focus on the compositional influence of C, a potential component of the light element in the Earth's core [9], on the partitioning behaviors of Pt, Re, and Os.

Chabot, N. L.↗
NASA NTRS2005

Hydrogen Abundances in Metal Grains from the Hammadah Al Hamra (HaH) 237 Metal-rich Chondrite: A Test of the Nebular-Formation Theory

The Bencubbin-like (CB) chondrites are metal-rich, primitive meteorites [1,2]. Some of these chondrites (HaH 237, QUE 94411) contain compositionally zoned metal grains with near-chondritic bulk compositions. Thermodynamic modeling of the zoning patterns in these grains suggests that they were formed by condensation in a region of the solar nebula with enhanced dust/gas ratios and a total pressure of 10(exp -4) bars at temperatures between 1400 - 1500 K [3]. If these predictions are correct than the metal grains would have been exposed to abundant H2 gas, which comprises the bulk of nebular systems. Since Fe-based alloys can absorb significant quantities of H, metal grains formed in the solar nebula should contain measurable abundances of H.

Lauretta, D. S.↗
NASA NTRS2011

Fabrication and Characterization of Brazed Joints for SiC-Metallic Systems Utilizing Refractory Metals

Metal to ceramic joining plays a key role for the integration of ceramics into many nuclear, ground and aero based technologies. In order to facilitate these technologies, the active metal brazing of silicon carbide (CVD beta-SiC, 1.1 mm thick, and hot-pressed alpha-SiC, 3 mm thick) to the refractory metals molybdenum and tungsten using active braze alloys was studied. The joint microstructure, composition, and microhardness were evaluated by optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Knoop hardness testing. The braze alloys, Cusil-ABA, Ticusil and Copper-ABA, all formed sound joints with excellent wetting and chemical bonding with the SiC substrate. Despite the close thermal expansion match between the metal substrates and SiC, hairline cracks formed in alpha-SiC while beta-SiC showed no signs of residual stress cracking. The use of ductile interlayers to reduce the effect from residual stresses was investigated and joints formed with copper as an interlayer produced crack free systems utilizing both CVD and hot-pressed SiC.

Coddington, Bryan↗
NASA NTRS1947

Some Investigations of the General Instability of Stiffened Metal Cylinders IX : Criterions for the Design of Stiffened Metal Cylinders Subject to General Instability Failures

Results are presented of an experimental investigation of the general instability of reinforced thin-walled metal cylinders subjected to pure bending and pure torsion over a range of geometrical quantities and structural sectional characteristics. Based on the experimental results and an existing theory of unstiffened metal cylinders, parameters were evolved which make possible an estimate of the stress at which general instability will occur for any given stiffened metal structure of circular cross section. (author)

STRESSED SKIN - CYLINDERS, METAL↗