Experimental Testing of the Theoretically Predicted Magnetic Properties for Kagomé Compounds in the Li–Fe–Ge System
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Highlights: • TmMgGaO{sub 4} crystallizes in the R-3m space group with the YbFe{sub 2}O{sub 4} structure. • TmMgGaO{sub 4} exhibits geometric magnetic frustration with no ordering down to 1.8 K. • Magnetic properties of TmMgGaO{sub 4} are highly anisotropic. - Abstract: The crystal growth, structure, and basic magnetic properties of TmMgGaO{sub 4} are reported. The Tm ions are located in a planar triangular lattice consisting of distorted TmO{sub 6} octahedra, while the Mg and Ga atoms randomly occupy intermediary bilayers of M-O triangular bipyramids. The Tm ions are positionally disordered. The material displays an antiferromagnetic Curie Weiss theta of ∼−20 −25 K, with no clear ordering visible in the magnetic susceptibility down to 1.8 K; the structure and magnetic properties suggest that ordering of the magnetic moments is frustrated by both structural disorder and the triangular magnetic motif. Single crystal magnetization measurements indicate that the magnetic properties are highly anisotropic, with large moments measured perpendicular to the triangular planes. At 2 K, a broad step-like feature is seen in the field-dependent magnetization perpendicular to the plane on applied field near 2 T.
We synthesized monodisperse nanospheres of an intermetallic FeSn{sub 5} phase via a nanocrystal-conversion protocol using preformed Sn nanospheres as templates. This tetragonal phase in P4/mcc space group, along with the defect structure Fe{sub 0.74}Sn{sub 5} of our nanospheres, has been resolved by synchrotron X-ray diffraction and Rietveld refinement. Importantly, FeSn{sub 5}, which is not yet established in the Fe-Sn phase diagram, exhibits a quasi-one dimensional crystal structure along the c-axis, thus leading to interesting anisotropic thermal expansion and magnetic properties. Magnetization measurements indicate that nanospheres are superparamagnetic above the blocking temperature T{sub B} = 300 K, which is associated with the higher magnetocrystalline anisotropy constant K = 3.33 kJ m{sup -3}. The combination of the magnetization measurements and first-principles density functional theory calculations reveals the canted antiferromagnetic nature with significant spin fluctuation in lattice a-b plane. The low Fe concentration also leads Fe{sub 0.74}Sn{sub 5} to enhanced capacity as an anode in Li ion batteries.
Low temperature crystal structure and magnetic properties of RAl{sub 2} (R = Pr and Nd) have been studied using temperature dependent powder x-ray diffraction, magnetization, and heat capacity measurements. Unlike PrAl{sub 2}, NdAl{sub 2} retains cubic MgCu{sub 2}-type structure from room temperature down to 5 K, which is also confirmed from first principles electronic structure calculations. The magnetization measurements show both PrAl{sub 2} and NdAl{sub 2} order ferromagnetically at T{sub C} = 32 K and 77 K, respectively. However, the magnetization measurements show the former is a hard ferromagnet compared to the latter which is a soft ferromagnetic material. The magnetic entropy change obtained from heat capacity measurements at ΔH = 30 kOe for PrAl{sub 2} and NdAl{sub 2} are 3.15 J mol{sup −1} K{sup −1} and 1.18 J mol{sup −1} K{sup −1}, respectively.
Explore the source record for details and available documents.
Amorphous Hf{sub 2}Co{sub 11}B alloys produced by melt-spinning have been crystallized by annealing at 500–800 °C, and the products have been investigated using magnetization measurements, x-ray diffraction, and scanning electron microscopy. The results reveal the evolution of the phase fractions, microstructure, and magnetic properties with both annealing temperature and time. Crystallization of the phase denoted HfCo{sub 7}, which is associated with the development of coercivity, occurs slowly at 500 °C. Annealing at intermediate temperatures produces mixed phase samples containing some of the HfCo{sub 7} phase with the highest values of remanent magnetization and coercivity. The equilibrium structure at 800 °C contains HfCo{sub 3}B{sub 2}, Hf{sub 6}Co{sub 23}, and Co, and displays soft ferromagnetism. Maximum values for the remanent magnetization, intrinsic coercivity, and magnetic energy product among the samples are approximately 5.2 kG, 2.0 kOe, and 3.1 MGOe, respectively, which indicates that the significantly higher values observed in crystalline, melt-spun Hf{sub 2}Co{sub 11}B ribbons are a consequence of the non-equilibrium solidification during the melt-spinning process. Application of high magnetic fields during annealing is observed to strongly affect the microstructural evolution, which may provide access to higher performance materials in Zr/Hf-Co hard ferromagnets. The crystal structure of HfCo{sub 7} and the related Zr analogues is unknown, and without knowledge of atomic positions powder diffraction cannot distinguish among proposed unit cells and symmetries found in the literature.
Pr{sub 2}Co{sub 14}B permanent magnet powders were prepared by mechanical milling of an arc-melted ingot. X-ray diffraction analysis revealed the presence of the 2:14:1 phase after 1 h of milling which transformed into an amorphous phase with additional milling time. Increasing the milling time also lowered the intrinsic coercivity while the saturation magnetization increased up to 105 emu/g. Differential scanning calorimetry measurements revealed a crystallization temperature of around 560 °C. Upon annealing 30 h of as-milled amorphous powders between 500 and 900 °C, we observed the precipitation of the 2:14:1 phase. The optimum post-milling annealing temperature was 600 °C with an intrinsic coercivity of 7 kOe and maximum energy product of 6 MGOe.
FeNi having the tetragonal L1{sub 0} crystal structure is a promising new rare-earth-free permanent magnet material. Laboratory synthesis is challenging, however, tetragonal L1{sub 0} FeNi—the mineral “tetrataenite”—has been characterized using specimens found in nickel-iron meteorites. Most notably, the meteorite NWA 6259 recovered from Northwest Africa is 95 vol. % tetrataenite with a composition of 43 at. % Ni. Hysteresis loops were measured as a function of sample orientation on a specimen cut from NWA 6259 in order to rigorously deduce the intrinsic hard magnetic properties of its L1{sub 0} phase. Electron backscatter diffraction showed that NWA 6259 is strongly textured, containing L1{sub 0} grains oriented along any one of the three equivalent cubic directions of the parent fcc structure. The magnetic structure was modeled as a superposition of the three orthonormal uniaxial variants. By simultaneously fitting first-quadrant magnetization data for 13 different orientations of the sample with respect to the applied field direction, the intrinsic magnetic properties were estimated to be saturation magnetization 4πM{sub s} = 14.7 kG and anisotropy field H{sub a} = 14.4 kOe. The anisotropy constant K = 0.84 MJ/m{sup 3} is somewhat smaller than the value K = 1.3 MJ/m{sup 3} obtained by earlier researchers from nominally equiatomic FeNi prepared by neutron irradiation accompanied by annealing in a magnetic field, suggesting that higher Ni content (fewer Fe antisite defects) may improve the anisotropy. The fit also indicated that NWA 6259 contains one dominant variant (62% by volume), the remainder of the sample being a second variant, and the third variant being absent altogether.
Spinel-type compounds of Fe–Ni–Sb–O system were synthesized as polycrystalline powders. The crystal and magnetic properties were investigated using X-ray and neutron powder diffraction, Mössbauer and X-ray absorption spectroscopy and magnetization measurements. The samples crystallize in the cubic system, space group Fd – 3 m. The distribution of cations between octahedral and tetrahedral sites was refined from the diffraction data sets using constraints imposed by the magnetic, Mössbauer and EDS results and the ionic radii. The cation distribution and the temperature dependence of the lattice parameter (a) and the oxygen positional parameter (u) were obtained. A chemical formula close to Fe0.8Ni1.8Sb0.4O4 was determined, with Sb5+ cations occupying octahedral sites, and Fe3+ and Ni2+ occupying both tetrahedral and octahedral sites. Fe3+ mainly (85/15 ratio) occupy tetrahedral sites, and conversely Ni2+ mainly reside on octahedral ones. The magnetic unit cell is the same as the crystallographic one, having identical symmetry relations. The results indicate that the compounds have a collinear ferrimagnetic structure with antiferromagnetic coupling between the tetrahedral (A) and octahedral (B) sites. Uniquely, the temperature dependence of the net magnetization of this rare earth free ferrimagnet exhibits a compensation point.
Here, we analyze the role of a thin Cr spacer between Fe and Gd layers on the structure and magnetic properties of a [Fe(35 Å)/Cr(t Cr )/Gd(50 Å)/Cr(t Cr )] 12 superlattice. Samples without the Cr spacer (t Cr = 0) and with a thin spacer (t Cr = 4 Å) are investigated using X-ray diffraction, polarized neutron and resonance X-ray magnetic reflectometry, static magnetometry, magneto-optical Kerr effect, and ferromagnetic resonance techniques. Magnetic properties are studied experimentally in a wide temperature range 4–300 K and analyzed theoretically using numerical simulation on the basis of the mean-field model. We show that a reasonable agreement with the experimental data can be obtained considering temperature dependence of the effective field parameter in gadolinium layers. In conclusion, the analysis of the experimental data shows that besides a strong reduction of the antiferromagnetic coupling between Fe and Gd, the introduction of Cr spacers into Fe/Gd superlattice leads to modification of both structural and magnetic characteristics of the ferromagnetic layers.
We report electronic structure, magnetic properties, and magnetostructural transformations of selected rare earth dialuminides calculated by using local spin density approximation (LSDA), including the Hubbard U parameter (LSDA + U) approach. Total energy calculations show that CeAl{sub 2} and EuAl{sub 2} adopt antiferromagnetic (AFM) ground states, while dialuminides formed by other magnetic lanthanides have ferromagnetic (FM) ground states. The comparison of theoretical and experimental magnetic moments of CeAl{sub 2} indicates that the 4f orbital moment of Ce in CeAl{sub 2} is quenched. Theoretical calculations confirm that Eu in EuAl{sub 2} and Yb in YbAl{sub 2} are divalent. PrAl{sub 2} exhibits a tetragonal distortion near FM transition. HoAl{sub 2} shows a first order magnetostructural transition while DyAl{sub 2} shows a second order transformation below magnetic transition. The dialuminides formed by Nd, Tb, and Er are simple ferromagnets without additional anomalies in the FM state.
In this article, inert-gas condensation was used to synthesize Co-W clusters. The formation, structure, and magnetic properties of the clusters were investigated. Sub-10-nm clusters were obtained, and the structures and average sizes were strongly dependent on sputtering power. At low sputtering powers, the clusters were predominantly amorphous, while, at high sputtering power, the clusters were crystalline. X ray diffraction and transmission electron microscopy revealed clusters with hcp structure at high sputtering power. The magnetic properties were dependent on the sputtering power and temperature, with the highest coercivity of 810 Oe at 10 K for high sputtering power.
The strong interplay of fundamental order parameters in complex oxides is known to give rise to exotic physical phenomena. The 4$d$ transition-metal oxide SrRh O 3 has generated much interest, but advances have been hindered by difficulties in preparing single-crystalline phases. Here we epitaxially stabilize high-quality single-crystalline SrRh O 3 films and investigate their structural, electronic, and magnetic properties. Lastly, we determine that their properties significantly differ from the paramagnetic metallic ground state that governs bulk samples and are strongly related to rotations of Rh O 6 octahedra.
Explore the source record for details and available documents.
Mn-Ga alloys have shown hard magnetic properties, even though these alloys contain no rare-earth metals. However, much work is needed before rare-earth magnets can be replaced. We have examined the magnetic properties of bulk alloys made with partial replacement of both the Mn and Ga elements in the Mn{sub 0.8}Ga{sub 0.2} system. Bulk samples of Mn-Ga-Bi, Mn-Ga-Al, Mn-Fe-Ga and Mn-(FeB)-Ga alloys were fabricated and studied using mechanically milling and heat treatments while altering the atomic percentage of the third element between 2.5 and 20 at%. The ternary alloy exhibits all hard magnetic properties at room temperature with large coercivity. Annealed Mn-Ga-X bulk composites exhibit high coercivities up to 16.6 kOe and remanence up to 9.8 emu/g, that is increased by 115% over the binary system.
The first-principles density functional theory has been used to study Ga/In-substituted strontium hexaferrite (SrFe12O19). Based on the calculation of the substitution energy of Ga and In in SrFe12O19 and the formation probability analysis, we conclude that in SrFe12−xGaxO19 the substituted Ga atoms prefer to occupy the 12k, 2a, and 4f1 sites, while In atoms in SrFe12−xInxO19 occupy the 12k, 4f2, and 4f1 sites. We used the site occupation probabilities to calculate the magnetic properties of the substituted SrFe12O19. It was found that as the fraction of Ga atoms in SrFe12−xGaxO19 increases, the saturation magnetization (Ms) as well as magnetic anisotropy energy (MAE) decrease, while the anisotropy field (Ha) increases. In the case of SrFe12−xInxO19, Ms, MAE, and Ha decrease with an increase of the concentration of In atoms.
Electrode materials for Li-ion batteries should combine electronic and ionic conductivity, structural integrity, and safe operation over thousands of lithium insertion and removal cycles. The quest for higher energy density calls for better understanding of the redox processes, charge and mass transfer occurring upon battery operation. A number of techniques have been used to characterize long-range and local structure, electronic and ionic transport in bulk of active materials and at interfaces, with an ongoing move toward in situ techniques determining the changes as they happen. This paper reviews several representative examples of using magnetic properties toward understanding of Li-ion battery materials with a notion to highlight the intimate connection between the magnetism, electronic and atomic structure of solids, and to demonstrate how this connection has been used to reveal the fine electronic and atomic details related to the electrochemical performance of the battery materials.
The crystal structure of the R5Ni2In4 intermetallic compounds was earlier reported for R Ho, Er, Tm, and Lu (Lu5Ni2In4-type, oP22, Pbam); more recently the isostructural phases Dy5Ni2In4 and Sc5Ni2In4 have also been identified. Three inequivalent crystallographic sites are occupied by the R atoms in these compounds. We have synthesized and characterized Dy5Ni2In4 and the two new isotypic compounds Tb5Ni2In4 and Y5Ni2In4. So far, none of the physical properties have been reported on any of these phases; in this article we report on the physical properties of the Dy5Ni2In4 and the crystal structure of Tb5Ni2In4 and Y5Ni2In4 compounds. Measurements of the magnetic properties performed on Dy5Ni2In4 show a ferromagnetic-like ordering with a T-C approximate to 105 K, followed by multiple magnetic orderings at lower temperatures. The fit of the inverse susceptibility in the paramagnetic state follows the Curie-Weiss law, where mu(eff). - 10.3 mu(B)/Dy-atom (close to theoretical value of 10.64 mu(B) for the free ion Dy3+) and a positive paramagnetic Curie temperature theta(p) - 58 K. Ni atoms are most likely to be nonmagnetic. The heat capacity also shows three peaks: a large one at 103K and two weaker at 12 and 8 K, respectively; the in-field heat capacity data corroborate these results, suggesting ferromagnetic and antiferromagnetic orderings at the temperature of 103 and 12 K, respectively. Low temperature x-ray diffraction has shown that the compound does not undergo any structural change down to 5K. (C) 2012 American Institute of Physics