Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LITHIUM HALIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Material Design Strategy for Halide Solid Electrolytes Li 3 MX 6 (X = Cl, Br, and I) for All-Solid-State High-Voltage Li-Ion Batteries

Although several solid electrolyte (SE) candidates have been explored, achieving the necessary combination of performance, stability, and processability has been challenging. Recently, several lithium ternary halides have attracted increasing attention for SEs because of their favorable combination of high ionic conductivity and wide electrochemical window. This study aims to provide a material design strategy for lithium halides Li 3 MX 6 (X = Cl, Br, and I) for high-voltage all-solid-state Li-ion batteries, achieved by the systematic investigation of crystal structures, phase and electrochemical stabilities, electronic and mechanical properties, and ionic conductivities. Calculation results reveal that the electronegativity difference between M and X affects structural properties and stabilities. Weak Coulomb interactions in Li 3 MX 6 result in the preference of the monoclinic phase, and the oxidation potential and chemical stability against the cathode materials of Li 3 MX 6 increase for relatively small X. Chlorides exhibit the highest oxidation potential (~4.3 V) among Li 3 MX 6 , suggesting that chlorides are appropriate SEs for high-voltage cathodes. The band gap and elastic moduli increase for relatively small X, suggesting the relatively low electronic conductivity and elastic deformability of chlorides. Chlorides with transition metals typically exhibit trigonal phases, a wider electrochemical stability window, a larger band gap, and higher elastic moduli compared to other types of halides. Additionally, chloride Li 3 MCl 6 is expected to have relatively high ionic conductivities with the aliovalent substitution of M 3+ to Zr 4+ and the anion mixing of Cl with Br. The findings of this study will provide fundamental guidelines for the development of lithium halide SEs for high-voltage all-solid-state Li-ion batteries.

25 ENERGY STORAGE↗

Capacitance scaling law for diatomic molecules and prediction of their electron detachment energies

The variation or 'scaling' of the quantum capacitances is explored for 45 diatomic molecules as a function of their dimensions. Scaling trends in the capacitances of these diatomic molecules dictate an 'atoms-in-molecules' view of their valence energetics. That is, experimentally derived quantum capacitances for both homonuclear and heteronuclear diatomic molecules scale linearly with the average of the mean radii for the outermost orbitals of their component atoms. This is in accord with Maxwell's law for classical capacitors formed from two conducting atom-sized spheres in tangential contact. However, the scaling behavior for the molecules has some nonclassical features. Notably, the quantum capacitances extrapolate to nonzero values at zero dimensions. Radius-capacitance points of the homonuclear diatomics lie primarily along five scaling lines, with each determined by points for molecules composed of atoms with the same atomic symmetry (i.e., atoms from the same column in the periodic table). Five scaling lines for heteronuclear diatomics each are determined by points for molecules of the same or similar molecular symmetries. The molecules' quantum capacitances are calculated from their ionization potentials (IPs) and electron affinities (EAs). Thus, equations or laws for the scaling lines impose mutual consistency conditions among these electron detachment energies for different diatomics of similar symmetries. By taking advantage of this, the linear quantum capacitance scaling laws and ab initio atomic mean radii are used to predict IPs for two diatomics with known EAs (Ga{sub 2} and SeO), but for which there is no standard value of the IP. Similarly, the laws are used to predict EAs that were unknown or uncertain for several diatomics (Li{sub 2}, LiF, CSe, PN, BF, BCl, SiO, GeO, NCl, CaO, SrO, and BaO) with known IPs.

36 MATERIALS SCIENCE↗

Molten salt synthesis and localized surface plasmon resonance study of vanadium dioxide nanopowders

Rutile-type vanadium dioxide nanopowders with four different sizes were successfully synthesized by carbothermal reducing V{sub 2}O{sub 5} in KCl-LiCl molten salt. XRD and TEM characterizations suggested that vanadium dioxide particles formed by a broken and reunited process of vanadium oxide. Molten salt and organic carbon sources are crucial to the size of final particles. In the presence of the molten salt, the organic carbon with a shorter chain length would induce smaller particles. The UV-VIS-IR spectral measurements for as-prepared vanadium dioxide announced an obvious localized surface plasmon resonance band in the near infrared region at 90 deg. C. - Graphical abstract: Schematic illustration of the formation mechanism of VO{sub 2}(M) nanoparticles in molten salt, particles size can be controlled by choosing organic carbon sources with different chain length.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A universal wet-chemistry synthesis of solid-state halide electrolytes for all-solid-state lithium-metal batteries

Solid-state halide electrolytes have gained revived research interests owing to their high ionic conductivity and high-voltage stability. However, synthesizing halide electrolytes from a liquid phase is extremely challenging because of the vulnerability of metal halides to hydrolysis. In this work, ammonium-assisted wet chemistry is reported to synthesize various solid-state halide electrolytes with an exceptional ionic conductivity (>1 microsiemens per centimeter). Microstrain-induced localized microstructure change is found to be beneficial to lithium ion transport in halide electrolytes. Furthermore, the interfacial incompatibility between halide electrolytes and lithium metal is alleviated by transforming the mixed electronic/ionic conductive interface into a lithium ion–conductive interface. Such all-solid-state lithium-metal batteries (ASSLMBs) demonstrate a high initial coulombic efficiency of 98.1% based on lithium cobalt oxide and a high discharge capacity of 166.9 microampere hours per gram based on single-crystal LiNi 0.6 Mn 0.2 Co 0.2 O 2 . This work provides universal approaches in both material synthesis and interface design for developing halide-based ASSLMBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tetrahedral Tilting and Lithium‐Ion Transport in Halide Argyrodites Prepared by Rapid, Microwave‐Assisted Synthesis

Abstract This study demonstrates a rapid, dry, microwave‐assisted (MW) synthesis method that enables preparation of halide argyrodites ( , , ) in less than 20 min. The structures and ion transport properties of the resulting materials are compared with those synthesized by conventional solid‐state synthesis methods. The microwave‐assisted method leads to increased site disorder and elevated Arrhenius prefactors (), which lead to an order of magnitude improvement in the 30 ionic conductivity of MW‐. X‐ray pair distribution function analysis (XPDF) reveals significant rotational disorder of the units, which is impacted by the synthesis method, choice of halide, and presence of / site disorder. These rotational displacements are strongly correlated with ion transport, specifically and entropy of migration (). Overall, this study demonstrates a rapid synthesis route for preparing high‐quality halide argyrodite solid‐state electrolytes in less than 20 min, and further unravels atomistic insights into the interplay of structural disorder, rotational dynamics, and ion transport mechanisms.

36 MATERIALS SCIENCE↗

Valence photoionization of the LiCl monomer and dimer

This paper reports a study of valence photoionization of the LiCl monomer and dimer. The behavior of the photoionization partial cross section for molecular valence orbitals was measured as a function of photon energy between 15 and 35 eV. A square-integrable-function method was used to model the ionization partial cross section in both the LiCl monomer and dimer.

74 ATOMIC AND MOLECULAR PHYSICS↗

Photoelectron emission from LiF surfaces by ultrashort electromagnetic pulses

Energy- and angle-resolved electron emission spectra produced by incidence of ultrashort electromagnetic pulses on a LiF(001) surface are studied by employing a distorted-wave method named the crystal surface-Volkov (CSV) approximation. The theory makes use of the Volkov phase to describe the action of the external electric field on the emitted electron, while the electron-surface interaction is represented within the tight-binding model. The CSV approach is applied to investigate the effects introduced by the crystal lattice when the electric field is oriented parallel to the surface plane. These effects are essentially governed by the vector potential of the external field, while the influence of the crystal orientation was found to be negligible.

74 ATOMIC AND MOLECULAR PHYSICS↗

In situ X-ray absorption spectroscopic investigation of the electrochemical conversion reactions of CuF{sub 2}-MoO{sub 3} nanocomposite

We have used X-ray absorption spectroscopy at the Cu K-edge to investigate the electrochemical conversion reaction of 20 nm size 85 wt% CuF{sub 2}-15 wt% MoO{sub 3} nanocomposite under in situ conditions. The nanocomposite was prepared by high energy milling. Upon discharge, the lithiation reaction with the nanocomposite resulted in the formation of nanophase metallic Cu, which is consistent with the conversion of CuF{sub 2} into Cu and LiF. Based on XANES and Fourier transforms of EXAFS spectra, we show that the discharge process proceeded via the formation of highly dispersed Cu particles. Based on the coordination number of the first shell of Cu, the average size of the Cu particles was estimated to be in the 1-3 nm range in the fully discharged state. -- Graphical Abstract: Comparison of Fourier transform of in situ Cu K-edge EXAFS spectra for a fully discharged CuF{sub 2{center_dot}}MoO{sub 3} nanocomposite in a nonaqueous Li cell with that of a Cu foil. Quantitative analysis of the Fourier transforms confirmed that the discharge mechanism for the nanocomposite proceeds via the reaction CuF{sub 2}+2Li{yields}Cu+2LiF. The discharge product of Cu is in the form of highly dispersed nanoparticles. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of the photoelastic effect on the thermal lensin a YLF crystal

The thermal lens in an YLF crystal is calculated taking into account the anisotropy of the thermal conductivity, elasticity, linear expansion, and refractive index. It is proved that the experimentally observed strong astigmatism of the thermal lens in YLF can be explained only taking into account the photoelastic effect. It is shown that, in an YLF crystal cut so that the optical axis lies in the plane of the rod face, the contribution to the thermal lens is made only by three photoelastic coefficients for the ordinary wave and only by two coefficients for the extraordinary wave. Using these five photoelastic coefficients as fitting parameters, all the known experimental data are quantitatively interpreted. (active media)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Liquid-like solid-state diffusion of lithium ions in super-halide-rich argyrodite

The development of solid electrolytes with high ionic conductivity is essential for advancing safer, high-energy-density solid-state batteries, where lithium site distribution in the sublattice strongly affects ion transport. Here, we report a super-halide-rich argyrodite, Li 5.3 PS 4.3 Cl 1.7 , with remarkable room-temperature ionic conductivity (11.4 ± 0.7 mS cm -1 ) due to population of two additional interstitial lithium sites induced by vacancy redistribution. Prominent lithium density between lithium sites and elevated atomic displacement parameters indicate liquid-like diffusive behavior resembling sublattice melting. Combining electrochemical impedance spectroscopy, pulsed-field gradient NMR, and T 1 relaxation methods, we demonstrate that the augmented conductivity partly arises from a low energy barrier (0.08 eV) at the local scale, attributed to a three-site lithium distribution that drives correlated lithium dynamics. This work advances our understanding of the structure-dynamics interplay in super-halide-rich argyrodites, and highlighting their potential as solid-state battery electrolytes in cells with a coated single-crystal NMC82 cathode that achieve 170 mAh/g capacity at a 0.2 C rate .

25 ENERGY STORAGE↗

Parametric study of expanding plasma plume formed by laser-blow-off of thin film using triple Langmuir probe

The triple probe technique has been used to study the parameters of flowing plasma plume formed by laser-blow-off (LBO) of a multicomponent LiF-C target. The advantages of triple Langmuir probe over the single probe have been discussed with regard to the present study. Our results show that triple probe is better suited for parametric measurements close to the target. The spatiotemporal evolutions of electron density and temperature were measured in different ambient environments and for various laser fluences. The angular distribution of electron density and temperature was also measured. It was found that the presence of ambient gas drastically affects the electron density and temperature of the LBO plume. Large enhancement in n{sub e} and T{sub e} at intermediate pressures (10{sup -2} Torr) is expected due to increase in collisional processes. On the other hand, laser fluence does not affect the observed n{sub e} and T{sub e} significantly. In vacuum, a new phenomenon, i.e., an oscillation in the trailing portion of the plasma plume at a closer distance from the target, is also reported.

36 MATERIALS SCIENCE↗

LINE-IMAGING ORVIS MEASUREMENTS OF INTERFEROMETRIC WINDOWS UNDER QUASI-ISENTROPIC COMPRESSION

A line-imaging optically recording velocity interferometer system (ORVIS) has been implemented on the Veloce pulsed power generator to enable measurement of spatially resolved velocity histories of materials under dynamic compression. Interferometric windows are regularly used to maintain the high-pressure state of shock and ramp (quasi-isentropic) loaded materials. Although imaging through a shock or fast ramp (<=10 ns) loaded window material has been reasonably successful, for slower ramp loading (approx440 ns) experiments, the elastic-plastic yielding of the window has an adverse effect on return light to the line-imaging ORVIS. The results of quasi-isentropic loading experiments with various interferometric windows such as LiF, PMMA, NaCl, quartz and sapphire are presented.

36 MATERIALS SCIENCE↗

Experimental and Simulated Characterization of a Beam Shaping Assembly for Accelerator- Based Boron Neutron Capture Therapy (AB-BNCT)

In the frame of the construction of a Tandem Electrostatic Quadrupole Accelerator facility devoted to the Accelerator-Based Boron Neutron Capture Therapy, a Beam Shaping Assembly has been characterized by means of Monte-Carlo simulations and measurements. The neutrons were generated via the {sup 7}Li(p, n){sup 7}Be reaction by irradiating a thick LiF target with a 2.3 MeV proton beam delivered by the TANDAR accelerator at CNEA. The emerging neutron flux was measured by means of activation foils while the beam quality and directionality was evaluated by means of Monte Carlo simulations. The parameters show compliance with those suggested by IAEA. Finally, an improvement adding a beam collimator has been evaluated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Laser generated neutron source for neutron resonance spectroscopy

A neutron source for neutron resonance spectroscopy has been developed using high-intensity, short-pulse lasers. This technique will allow robust measurement of interior ion temperature of laser-shocked materials and provide insight into material equation of state. The neutron generation technique uses laser-accelerated protons to create neutrons in LiF through (p,n) reactions. The incident proton beam has been diagnosed using radiochromic film. This distribution is used as the input for a (p,n) neutron prediction code which is validated with experimentally measured neutron yields. The calculation infers a total fluence of 1.8x10{sup 9} neutrons, which are expected to be sufficient for neutron resonance spectroscopy temperature measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Emission Analysis of RE{sup 3+} (= Nd{sup 3+} and Er{sup 3+}) Doped Bi{sub 2}O{sub 3}-B{sub 2}O{sub 3}-LiF Glass Systems

This paper reports on the absorption and emission spectra o of RE{sup 3+} (= Nd{sup 3+} or Er{sup 3+}) doped Bi{sub 2}O{sub 3}-B{sub 2}O{sub 3}-LiF (Bi-B-LiF) glass system. The absorption spectrum of Nd{sup 3+} doped Bi-B-LiF glass has exhibited eight absorption bands at 513 nm, 525 nm, 584 nm, 626 nm, 682 nm, 748 nm, 805 nm and 876 which correspond to the electronic transitions of ({sup 4}I{sub 9/2}{yields}{sup 4}G{sub 9/2}), ({sup 4}I{sub 9/2}{yields}{sup 4}G{sub 9/2}, {sup 4}G{sub 7/2}), ({sup 4}I{sub 9/2}{yields}{sup 4}G{sub 5/2}, {sup 2}G{sub 7/2}), ({sup 4}I{sub 9/2}{yields}{sup 2}H{sub 11/2}), ({sup 4}I{sub 9/2}{yields}{sup 4}F{sub 9/2}), ({sup 4}I{sub 9/2}{yields}{sup 4}F{sub 5/2}, {sup 4}S{sub 3/2}), ({sup 4}I{sub 9/2}{yields}{sup 4}F{sub 5/2}, {sup 2}H{sub 9/2}) and ({sup 4}I{sub 9/2}{yields}{sup 4}F{sub 5/2}) respectively. From Nd{sup 3+} : Bi-B-LiF glass, three NIR emission bands have been observed at 900 nm, 1075 nm and 1342 nm, which are assigned to the transitions of ({sup 4}F{sub 3/2}{yields}{sup 4}I{sub 9/2}), ({sup 4}F{sub 3/2}{yields}{sup 4}I{sub 11/2}) and ({sup 4}F{sub 3/2}{yields}{sup 4}I{sub 13/2}) respectively with an excitation at 514.5 nm (Ar{sup +} ion laser). The Er{sup 3+} : Bi-B-LiF glass has revealed six absorption bands at 489 nm, 522 nm, 653 nm, 800 nm, 973 nm and 1531 nm which are labeled to the transitions of ({sup 4}I{sub 15/2}{yields}{sup 4}F{sub 7/2}), ({sup 4}I{sub 15/2}{yields}{sup 2}H{sub 11/2}, 4G{sub 11/2}), ({sup 4}I{sub 15/2}{yields}{sup 4}F{sub 9/2}), ({sup 4}I{sub 15/2}{yields}{sup 4}I{sub 7/2}), ({sup 4}I{sub 15/2}{yields}{sup 4}I{sub 11/2}), and ({sup 4}I{sub 15/2}{yields}{sup 4}I{sub 13/2}) respectively. From the Er{sup 3+}: Bi-B-LiF glass, an NIR emission at 1540 nm ({sup 4}I{sub 13/2}{yields}{sup 4}I{sub 15/2}), has been observed with an excitation at 514.5 nm (Ar{sup +} ion laser).

36 MATERIALS SCIENCE↗

Analysis of the absorption spectra and spectral hole burning in zero-phonon lines of F{sup +}{sub 3} and N{sub 1} colour centres in LiF crystals

The temperature dependences and mechanisms of broadening of zero-phonon lines of F{sup +}{sub 3} (488 nm) and N{sub 1} (523 nm) colour centres in LiF crystals are investigated. The results obtained make it possible to determine the quadratic electronic-vibrational coupling constant for N{sub 1} colour centres. The experimental data on the spectral hole burning in zero-phonon lines of F{sup +}{sub 3} and N{sub 1} colour centres indicate that the latter are positively charged. (laser applications and other topics in quantum electronics)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗