Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LED simulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Reconstructed Performance of the Mars InSight Lander’s Supersonic Parachute & Comparison with the Phoenix Lander

On November 26th, 2018 the Mars InSight landersuccessfully touched down at Elysium Planitia. InSight’s Entry,Descent, and Landing sequence included an 11.8-m supersonicallydeployed Disk-Gap-Band parachute that was a largelybuild-to-print version of the parachute used to successfully landthe Phoenix lander a decade earlier. This paper describes thereconstructed performance of InSight’s supersonic parachuteat Mars, highlighting the differences and similarities with theperformance of Phoenix’s parachute. Measurements from theonboard inertial measurement unit along with pre-launch measurementsof the parachute system and spacecraft, assumptionsabout the vehicle’s aerodynamics, and models for the Martianatmosphere were used to reconstruct the spacecraft’s trajectoryand the parachute system’s performance. The reconstruction resultswere compared against pre-flight predictions. Reconstructionof the InSight trajectory leading up to parachute deploymentshowed that the vehicle trimmed in a lift-down orientationduring entry and thus experienced greater deceleration thanexpected by most pre-flight simulations. This led to parachutedeployment conditions that diverged from the nominal preflightpredictions. The parachute was mortar-deployed at aMach number of approximately 1.5, below the nominal preflightexpectation of 1.66. The approximate dynamic pressureat mortar fire was between 518 Pa and 546 Pa, which agreedwell with pre-flight expectations. The mortar system performednominally, and the system’s deployment (0.755 s) and inflation(1.1 s) times were in line with pre-flight modeling. The peakinflation load was 45 kN, well below the parachute’s 67 kNdesign limit load. Following deployment of the parachute,the vehicle’s rotational rates and the dynamics of the systemwere in excellent agreement with pre-flight expectations. Theperformance of the InSight parachute system was also foundto agree well with that of the Phoenix parachute system, asexpected given the similarities between the two systems.

Karlgaard, Chris↗
DOE OSTI2024

WTK-LED: The WIND Toolkit Long-Term Ensemble Dataset

To satisfy a wide group of stakeholders across various wind energy disciplines, including but not limited to stakeholders in the distributed and utility scale wind industry, the new emerging airborne wind energy field, grid integration, power systems modeling, environmental modeling, and researchers in academia, and to close some of the gaps that current public datasets have, we aimed at developing an updated version of the meteorological WIND Toolkit, named WIND Toolkit Long-term Ensemble Dataset (WTK-LED), which is a meteorological dataset providing time series every 5 min and 2 km, including model uncertainty of wind speed at every modeling grid point so that users are provided with a range of possible wind speeds every 2 km. The data were produced using the Weather Research and Forecasting Model (WRF). The vertical grid used in WTK-LED includes many vertical layers in the atmospheric boundary layer to provide information of atmospheric quantities across the rotor layer of utility scale and distributed wind turbines. The WTK-LED includes: 1) Numerical simulations covering the continental United States, Alaska, and Hawaii, with high-resolution data being available for 3 years (2018-2020). 2) Climate simulations from Argonne National Laboratories covering the North American continent, including Alaska, Canada, and most of Mexico and the Caribbean Islands. These simulations complement the new WTK-LED to offer a 4-km dataset covering 20 years, from 2001-2020. 3) Specific long-term,high-resolution offshore simulations have been conducted separately for the US coasts, Hawaii, and the Great Lakes, leading to the 2023 National Offshore Wind data set. This report focuses on a description of the land-based WTK-LED for CONUS, Hawaii, and Alaska, for the 3-year 2-km/5-min dataset and the 20-year 4-km/hourly dataset, as well as the uncertainty quantification method. We also provide limited validation results. Based on our results to date, we suggest use cases and applications for each dataset of the WTK-LED.

17 WIND ENERGY↗
NASA NTRS2001

Data Synchronization Discrepancies in a Formation Flight Control System

Aircraft hardware-in-the-loop simulation is an invaluable tool to flight test engineers; it reveals design and implementation flaws while operating in a controlled environment. Engineers, however, must always be skeptical of the results and analyze them within their proper context. Engineers must carefully ascertain whether an anomaly that occurs in the simulation will also occur in flight. This report presents a chronology illustrating how misleading simulation timing problems led to the implementation of an overly complex position data synchronization guidance algorithm in place of a simpler one. The report illustrates problems caused by the complex algorithm and how the simpler algorithm was chosen in the end. Brief descriptions of the project objectives, approach, and simulation are presented. The misleading simulation results and the conclusions then drawn are presented. The complex and simple guidance algorithms are presented with flight data illustrating their relative success.

Ryan, Jack↗
NASA NTRS2017

Smectite Formation in the Presence of Sulfuric Acid: Implications for Acidic Smectite Formation on Early Mars

The excess of orbital detection of smectite deposits compared to carbonate deposits on the martian surface presents an enigma because smectite and carbonate formations are both favored alteration products of basalt under neutral to alkaline conditions. We propose that Mars experienced acidic events caused by sulfuric acid (H2SO4) that permitted phyllosilicate, but inhibited carbonate, formation. To experimentally verify this hypothesis, we report the first synthesis of smectite from Mars-analogue glass-rich basalt simulant (66 wt% glass, 32 wt% olivine, 2 wt% chromite) in the presence of H2SO4 under hydrothermal conditions (approximately 200 degC). Smectites were analyzed by X-ray diffraction, Mossbauer spectroscopy, visible and near-infrared reflectance spectroscopy and electron microprobe to characterize mineralogy and chemical composition. Solution chemistry was determined by Inductively Coupled Plasma Mass Spectrometry. Basalt simulant suspensions in 11-42 mM H2SO4 were acidic with pH less than or equal to 2 at the beginning of incubation and varied from acidic (pH 1.8) to mildly alkaline (pH 8.4) at the end of incubation. Alteration of glass phase during reaction of the basalt simulant with H2SO4 led to formation of the dioctahedral smectite at final pH approximately 3 and trioctahedral smectite saponite at final pH approximately 4 and higher. Anhydrite and hematite formed in the final pH range from 1.8 to 8.4 while natroalunite was detected at pH 1.8. Hematite was precipitated as a result of oxidative dissolution of olivine present in Adirondack basalt simulant. Formation of secondary phases, including smectite, resulted in release of variable amounts of Si, Mg, Na and Ca while solubilization of Al and Fe was low. Comparison of mineralogical and solution chemistry data indicated that the type of smectite (i.e., dioctahedral vs trioctahedral) was likely controlled by Mg leaching from altering basalt and substantial Mg loss created favorable conditions for formation of dioctahedral smectite. We present a model for global-scale smectite formation on Mars via acid-sulfate conditions created by the volcanic outgassing of SO2 in the Noachian and early Hesperian.

Smectite↗
NASA NTRS1986

N-ROSS: The dynamics and control issues

The Navy Remote Ocean Sensing System (N-ROSS) Dynamic Stability Study team concluded that the frozen April 1985 design was viable and contained no show stoppers, although it was also clear from the study results that the configuration required further optimization. While the frozen N-ROSS configuration used has since been superceded, and the vehicle is now under competitive procurement, several other results remain from the study that will have lasting value to the N-ROSS program. The importance of constructing an integrated simulation, to serve as a design and verification aid, has been clearly established. The two team approach to the study afforded the Navy a higher degree of confidence in the results than could have been accomplished by a single simulation, and the approach led to results that highlighted subtleties in the model and simulation development that surely would have been overlookded without the benefit of an independent companion simulation with which to compare it.

Lindberg, Robert E.↗
DOE OSTI2026

Intelligent Experiments Through Real-time AI: Fast Data Processing and Autonomous Detector Control for sPHENIX and Future EIC Detectors (Final Report)

The overall vision of this project was to integrate real-time artificial intelligence (AI) directly into the data acquisition and detector-control systems of nuclear physics experiments, including both fast online event selection and an autonomous detector-control feedback loop. The work carried out under the award focused on the fast online event-selection half of that vision: the efficient recording of low-momentum heavy-flavor (HF) hadron decays in proton-proton collisions at the sPHENIX experiment at the Relativistic Heavy Ion Collider (RHIC)—an observable that requires fast tracking and topological trigger selection not previously demonstrated at RHIC, and that is essential for QCD studies at future facilities such as the Electron-Ion Collider (EIC). The autonomous detector-control (GPU-based feedback) component named in the project title remained a design concept and was not implemented under this award. The Massachusetts Institute of Technology (MIT) group led the offline simulation and data processing needed to train the machine-learning (ML) models, the translation of trained models to Field-Programmable Gate Array (FPGA) firmware using the hls4ml framework, and the physics validation of heavy-flavor reconstruction. Over the award period, the team developed and hardware-tested the principal components of an AI-based heavy-flavor trigger on simulated and recorded sPHENIX tracker data: a software Bipartite Graph Attention Network (BiGAT) trigger model reaching > 95% signal efficiency at 99% background rejection; an FPGA-native hit clusterizer matching the offline clustering; smaller networks synthesized to FPGA within the required sub-10 µs latency; and an assembled decoder–clusterizer–inference firmware chain exercised on the FELIX readout board. A complete, fully integrated hardware demonstrator was not finished within the award period. This report documents the project goals, the MIT group’s contributions, the technical accomplishments, and the outlook toward applications at the future EIC ePIC detector.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1973

Impact resistance of fiber composite blades used in aircraft turbine engines

Resistance of advanced fiber reinforced epoxy matrix composite materials to ballistic impact was investigated as a function of impacting projectile characteristics, and composite material properties. Ballistic impact damage due to normal impacts, was classified as transverse (stress wave delamination and splitting), penetrative, or structural (gross failure). Steel projectiles were found to be gelatin ice projectiles in causing penetrative damage leading to reduced tensile strength. Gelatin and ice projectiles caused either transverse or structural damage, depending upon projectile mass and velocity. Improved composite transverse tensile strength, use of dispersed ply lay-ups, and inclusion of PRD-49-1 or S-glass fibers correlated with improved resistance of composite materials to transverse damage. In non-normal impacts against simulated blade shapes, the normal velocity component of the impact was used to correlate damage results with normal impact results. Stiffening the leading edge of simulated blade specimens led to reduced ballistic damage, while addition of a metallic leading edge provided nearly complete protection against 0.64 cm diameter steel, and 1.27 cm diameter ice and gelatin projectiles, and partial protection against 2.54 cm diameter projectiles of ice and gelatin.

Friedrich, L. A.↗
NASA NTRS1976

The effect of digital computing on the performance of a closed-loop control-loading system

A sampled data model of a control loader system for flight simulation was developed and successfully validated. The model accounts for the effects of the central digital simulation computer on the response of the analog control loader system and includes the spring-gradients, bob-weight, and actuator-lag effects of the aircraft. The revelation of a frequency error introduced by the implementation of force feedback through the digital computer that could adversely affect pilot performance in simulated flight has led to a proposed new implementation which will minimize the impact of the frequency problem.

Parrish, R. V.↗
NASA NTRS1979

Waveguide arc study

Research on waveguide arcs is presented as well as an evaluation on an arc detector. Ways of improving the radio frequency arc generation include methods of generating RF arcs inside the resonator. Dc nitrogen arcs were used to study a spectroradiometer. The spectral strucutres obtained provide a general sketch of spectral distribution and their relative magnitude. The upgrading of a transmitter test light and the simulation of an LED array are reported.

Yen, H. C.↗
NASA NTRS2022

The impacts of immersion ice nucleation parameterizations on Arctic mixed-phase stratiform cloud properties and the Arctic radiation budget in GEOS-5

The influence of four different immersion freezing parameterizations on Arctic clouds and the top-of-the atmosphere (TOA) and surface radiation fluxes is investigated in the fifth version of the National Aeronautics and Space Administration (NASA) Goddard Earth Observing System (GEOS-5) with sea surface temperature, sea ice fraction and aerosol emissions held fixed. The different parameterizations were derived from a variety of sources, including classical nucleation theory, field and laboratory measurements. Despite the large spread in the ice-nucleating particle (INP) concentrations in the parameterizations, the cloud properties and radiative fluxes had a tendency to form two groups, with the lower INP concentration category producing larger water path and low-level cloud fraction during winter and early spring, whereas the opposite occurred during the summer season. The stability of the lower troposphere was found to strongly correlate with low-cloud fraction, and along with the effect of ice nucleation, ice sedimentation and melting rates, appears to explain the spring-to-summer reversal pattern in the relative magnitude of the cloud properties between the two categories of simulations. The strong modulation effect of the liquid phase on immersion freezing led to the successful simulation of the characteristic Arctic cloud structure, with a layer rich in supercooled water near cloud top and ice and snow at lower levels. Comparison with satellite retrievals and in situ data suggest that simulations with low INP concentrations more realistically represent Arctic clouds and radiation.

Arctic↗
NASA NTRS2018

Computational Model Prediction and Biological Validation Using Simplified Mixed Field Exposures for the Development of a GCR Reference Field

The yield of chromosomal aberrations has been shown to increase in the lymphocytes of astronauts after long-duration missions of several months in space. Chromosome exchanges, especially translocations, are positively correlated with many cancers and are therefore a potential biomarker of cancer risk associated with radiation exposure. Although extensive studies have been carried out on the induction of chromosomal aberrations by low- and high-LET radiation in human lymphocytes, fibroblasts, and epithelial cells exposed in vitro, there is a lack of data on chromosome aberrations induced by low dose-rate chronic exposure and mixed field beams such as those expected in space. Chromosome aberration studies at NSRL will provide the biological validation needed to extend the computational models over a broader range of experimental conditions (more complicated mixed fields leading up to the galactic cosmic rays (GCR) simulator), helping to reduce uncertainties in radiation quality effects and dose-rate dependence in cancer risk models. These models can then be used to answer some of the open questions regarding requirements for a full GCR reference field, including particle type and number, energy, dose rate, and delivery order. In this study, we designed a simplified mixed field beam with a combination of proton, helium, oxygen, and iron ions with shielding or proton, helium, oxygen, and titanium without shielding. Human fibroblasts cells were irradiated with these mixed field beam as well as each single beam with acute and chronic dose rate, and chromosome aberrations (CA) were measured with 3-color fluorescent in situ hybridization (FISH) chromosome painting methods. Frequency and type of CA induced with acute dose rate and chronic dose rates with single and mixed field beam will be discussed. A computational chromosome and radiation-induced DNA damage model, BDSTRACKS (Biological Damage by Stochastic Tracks), was updated to simulate various types of CA induced by acute exposures of the mixed field beams used for the experiments. The chromosomes were simulated by a polymer random walk algorithm with restrictions to their respective domains in the nucleus [1]. The stochastic dose to the nucleus was calculated with the code RITRACKS [2]. Irradiation of a target volume by a mixed field of ions was implemented within RITRACKs, and the fields of ions can be delivered over specific periods of time, allowing the simulation of dose-rate effects. Similarly, particles of various types and energies extracted from a pre-calculated spectra of galactic cosmic rays (GCR) can be used in RITRACKS. The number and spatial location of DSBs (DNA double-strand breaks) were calculated in BDSTRACKS using the simulated chromosomes and local (voxel) dose. Assuming that DSBs led to chromosome breaks, and simulating the rejoining of damaged chromosomes occurring during repair, BDSTRACKS produces the yield of various types of chromosome aberrations as a function of time (only final yields are presented). A comparison between experimental and simulation results will be shown.

Hada, M.↗
NASA NTRSDate not supplied

Synthesis Analysis of Mulit-Dimensional Ozone Lidar Measurements in Coastal Environments Toward Improving Ozone Simulation

Large surface ozone variations are frequently observed in coastal regions which makes the modeling of air quality in these regions challenging. The ability to properly model coastal regions relies heavily on the proper detailed observations. There have been three air quality studies (over Chesapeake Bay and the Long Island Sound) that focused on thorough measurements in these complex coastal regions; OWLETS 1 & 2 and LISTOS. Over the course of the campaigns, there were surface ozone observations taken from LIDAR (LIght Detection And Ranging) instruments for a total of 89 days at a high temporal rate. We developed a clustering method that characterizes the multiple timestamps of measurements into a range of ozone events that are specific to these coastal regions. We simulated coastal ozone for these cluster groups using WRF-GC and WRF-Chem to identify gaps within the model. Using the characterized ozone clusters, we were able to identify multiple coastal mechanisms that led to incorrect model simulations.

Claudia Bernier↗
NASA NTRS2013

Enhanced Contact Graph Routing (ECGR) MACHETE Simulation Model

Contact Graph Routing (CGR) for Delay/Disruption Tolerant Networking (DTN) space-based networks makes use of the predictable nature of node contacts to make real-time routing decisions given unpredictable traffic patterns. The contact graph will have been disseminated to all nodes before the start of route computation. CGR was designed for space-based networking environments where future contact plans are known or are independently computable (e.g., using known orbital dynamics). For each data item (known as a bundle in DTN), a node independently performs route selection by examining possible paths to the destination. Route computation could conceivably run thousands of times a second, so computational load is important. This work refers to the simulation software model of Enhanced Contact Graph Routing (ECGR) for DTN Bundle Protocol in JPL's MACHETE simulation tool. The simulation model was used for performance analysis of CGR and led to several performance enhancements. The simulation model was used to demonstrate the improvements of ECGR over CGR as well as other routing methods in space network scenarios. ECGR moved to using earliest arrival time because it is a global monotonically increasing metric that guarantees the safety properties needed for the solution's correctness since route re-computation occurs at each node to accommodate unpredicted changes (e.g., traffic pattern, link quality). Furthermore, using earliest arrival time enabled the use of the standard Dijkstra algorithm for path selection. The Dijkstra algorithm for path selection has a well-known inexpensive computational cost. These enhancements have been integrated into the open source CGR implementation. The ECGR model is also useful for route metric experimentation and comparisons with other DTN routing protocols particularly when combined with MACHETE's space networking models and Delay Tolerant Link State Routing (DTLSR) model.

Segui, John S.↗
NASA NTRS2022

Interactive Biogenic Emissions and Drought Stress Effects on Atmospheric Composition in NASA GISS ModelE

Drought is a hydroclimatic extreme that causes perturbations to the terrestrial biosphere and acts as a stressor on vegetation, affecting emissions patterns. During severe drought, isoprene emissions are reduced. In this paper, we focus on capturing this reduction signal by implementing a new percentile isoprene drought stress (y d ) algorithm in NASA GISS ModelE based on the MEGAN3 (Model of Emissions of Gases and Aerosols from Nature Version 3) approach as a function of a photosynthetic parameter (V c,max ) and water stress (β). Four global transient simulations from 2003–2013 are used to demonstrate the effect without y d (Default_ModelE) and with online y d (DroughtStress_ModelE). DroughtStress_ModelE is evaluated against the observed isoprene measurements at the Missouri Ozarks AmeriFlux (MOFLUX) site during the 2012 severe drought where improvements in the correlation coefficient indicate it is a suitable drought stress parameterization to capture the reduction signal during severe drought. The application of y d globally leads to a decadal average reduction of ∼ 2.7 %, which is equivalent to ∼14.6 Tg yr -1 of isoprene. The changes have larger impacts in regions such as the southeastern US. DroughtStress_ModelE is validated using the satellite ΩHCHO column from the Ozone Monitoring Instrument (OMI) and surface O 3 observations across regions of the US to examine the effect of drought on atmospheric composition. It was found that the inclusion of isoprene drought stress reduced the overestimation of ΩHCHO in Default_ModelE during the 2007 and 2011 southeastern US droughts and led to improvements in simulated O 3 during drought periods. We conclude that isoprene drought stress should be tuned on a model-by-model basis because the variables used in the parameterization responses are relative to the land surface model hydrology scheme (LSM) and the effects of y d application could be larger than seen here due to ModelE not having large biases of isoprene during severe drought.

drought stress effects↗
DOE OSTI2025

Systematic softening in universal machine learning interatomic potentials

Machine learning interatomic potentials (MLIPs) have introduced a new paradigm for atomic simulations. Recent advancements have led to universal MLIPs (uMLIPs) that are pre-trained on diverse datasets, providing opportunities for universal force fields and foundational machine learning models. However, their performance in extrapolating to out-of-distribution complex atomic environments remains unclear. In this study, we highlight a consistent potential energy surface (PES) softening effect in three uMLIPs: M3GNet, CHGNet, and MACE-MP-0, which is characterized by energy and force underprediction in atomic-modeling benchmarks including surfaces, defects, solid-solution energetics, ion migration barriers, phonon vibration modes, and general high-energy states. The PES softening behavior originates primarily from the systematically underpredicted PES curvature, which derives from the biased sampling of near-equilibrium atomic arrangements in uMLIP pre-training datasets. Our findings suggest that a considerable fraction of uMLIP errors are highly systematic, and can therefore be efficiently corrected. We argue for the importance of a comprehensive materials dataset with improved PES sampling for next-generation foundational MLIPs.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Excess noise from supersonic underexpanded jets in flight. I

A combination of flow visualization and measurement of both the near and far-field radiated noise of supersonic underexpanded jets under simulated flight conditions has led to the identification of a mechanism of excess jet noise production. It was observed that large lateral oscillations were imparted to the entire jet by the complex interaction of the outer flow with the jet. These jet oscillations appeared to develop almost abruptly into large oscillations becoming fully developed at about 6 to 10 diameters downstream of the nozzle exit at a location where the jet became subsonic. This lateral jet motion was observed to be planar and was accompanied by the production of weak shock waves. These weak shock waves existed in 'localized' circumferential regions outside the jet, e.g., quadrants or portions thereof and traveled upstream. It was determined that the measured excess noise was produced by these weak shock waves. Neither the jet oscillations nor the excess noise existed when there was no outer flow around the supersonic underexpanded jet.

Sarohia, V.↗
NASA NTRS1980

Space Telescope design for maintenance

The Space Telescope is the first free-flying spacecraft designed to be serviced and repaired by EVA astronauts performing in-orbit maintenance tasks necessary to replace failed or worn-out components. The Telescope's operational profile anticipates in-orbit maintenance approximately two and one half years after initial launch, spacecraft return to ground after five years, and relaunch about one year later. Component design for in-orbit maintenance is being verified by 1-G and neutral buoyancy simulation techniques. Skylab experience led to the implementation of this approach which has significant economic benefits compared to 'one-time-use' space hardware.

Field, E. L.↗
NASA NTRS2007

Progress in Spacecraft Environment Interactions: International Space Station (ISS) Development and Operations

The set of spacecraft interactions with the space flight environment that have produced the largest impacts on the design, verification, and operation of the International Space Station (ISS) Program during the May 2000 to May 2007 time frame are the focus of this paper. In-flight data, flight crew observations, and the results of ground-based test and analysis directly supporting programmatic and operational decision-making are reported as are the analysis and simulation efforts that have led to new knowledge and capabilities supporting current and future space explorations programs. The specific spacecraft-environment interactions that have had the greatest impact on ISS Program activities during the first several years of flight are: 1) spacecraft charging, 2) micrometeoroids and orbital debris effects, 3) ionizing radiation (both total dose to materials and single event effects [SEE] on avionics), 4) hypergolic rocket engine plume impingement effects, 5) venting/dumping of liquids, 6) spacecraft contamination effects, 7) neutral atmosphere and atomic oxygen effects, 8) satellite drag effects, and 9) solar ultraviolet effects. Orbital inclination (51.6deg) and altitude (nominally between 350 km and 460 km) determine the set of natural environment factors affecting the performance and reliability of materials and systems on ISS. ISS operates in the F2 region of Earth s ionosphere in well-defined fluxes of atomic oxygen, other ionospheric plasma species, solar UV, VUV, and x-ray radiation as well as galactic cosmic rays, trapped radiation, and solar cosmic rays. The micrometeoroid and orbital debris environment is an important determinant of spacecraft design and operations in any orbital inclination. The induced environment results from ISS interactions with the natural environment as well as environmental factors produced by ISS itself and visiting vehicles. Examples include ram-wake effects, hypergolic thruster plume impingement, materials out-gassing, venting and dumping of fluids, and specific photovoltaic (PV) power system interactions with the ionospheric plasma. Vehicle size (L) and velocity (v), combined with the magnitude and direction of the geomagnetic field (B) produce operationally significant magnetic induction voltages (VxB.L) in ISS conducting structure during high latitude flight (>+/- 45deg) during each orbit. In addition, ISS is a large vehicle and produces a deep wake structure from which both ionospheric plasma and neutrals species are largely excluded. ISS must fly in a very limited number of approved flight attitudes, so that exposure of a particular material or system to environmental factors depends upon: 1) location on ISS, 2) ISS flight configuration, 3) ISS flight attitude, and 4) variation of solar exposure (Beta angle), and hence thermal environment, with time. Finally, an induced ionizing radiation environment is produced by trapped radiation and solar/cosmic ray interactions with the relatively massive ISS structural shielding.

Koontz, Steve↗