Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEAD 215”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

36 records · Page 2

Low-temperature Stirling Engine for Geothermal Electricity Generation

Up to 2700 terawatt-hours per year of geothermal electricity generation capacity has been shown to be available within North America, typically with wells drilled into geologically active regions of the earth's crust where this energy is concentrated (Huttrer, 2001). Of this potential, about half is considered to have temperatures high enough for conventional (steam-based) power production, while the other half requires unconventional power conversion approaches, such as organic Rankine cycle systems or Stirling engines. If captured and converted effectively, geothermal power generation could replace up to 100GW of fossil fuel electric power generation, leading to a significant reduction of US power sector emissions. In addition, with the rapid growth of hydro-fracking in oil and gas production, there are smaller-scale distributed power generation opportunities in heated liquids that are co-produced with the main products. Since 2006, Cool Energy, Inc. (CEI) has designed, fabricated and tested four generations of low-temperature (100°C to 300°C) Stirling engine power conversion equipment. The electric power output of these engines has been demonstrated at over 2kWe and over 16% thermal conversion efficiency for an input temperature of 215°C and a rejection temperature of 15°C. Initial pilot units have been shipped to development partners for further testing and validation, and significantly larger engines (20+ kWe) have been shown to be feasible and conceptually designed. Originally intended for waste heat recovery (WHR) applications, these engines are easily adaptable to geothermal heat sources, as the heat supply temperatures are similar. Both the current and the 20+ kWe designs use novel approaches of self-lubricating, low-wear-rate bearing surfaces, non-metallic regenerators, and high-effectiveness heat exchangers. By extending CEI's current 3 kWe SolarHeart® Engine into the tens of kWe range, many additional applications are possible, as one 20 kWe design produces nearly seven times the power output of the 3 kWe unit but at only 2.5 times the estimated fabrication cost. Phase I of the proposed SBIR program will therefore study the feasibility of generating electricity with one or more 20 kWe or larger Stirling engines, powered by geothermal heat produced by current and possibly some forward-looking borehole extraction methods, and from producing oil and gas wells. The feasibility study will include full analysis of the thermodynamic and heat transfer processes within the engine (necessary to produce optimum theoretical designs and performance maps), the cost of pumping the geothermal heat recovery fluid, and how the system tradeoffs impact the overall system economics. The goal is a geothermal system design that could be demonstrated during a Phase II follow-on program at a field test site.

15 GEOTHERMAL ENERGY↗

Exclusive dielectron production in ultraperipheral Pb+Pb collisions at $\sqrt{s_{\textrm{NN}}}$ = 5.02 TeV with ATLAS

Exclusive production of dielectron pairs, γγ → e + e – , is studied using $\mathcal{L}_{int}$ = 1.72 nb –1 of data from ultraperipheral collisions of lead nuclei at $\sqrt{s_{NN}}$ = 5.02 TeV recorded by the ATLAS detector at the LHC. The process of interest proceeds via photon–photon interactions in the strong electromagnetic fields of relativistic lead nuclei. Dielectron production is measured in the fiducial region defined by following requirements: electron transverse momentum $p^{e}_{T}$ > 2.5 GeV, absolute electron pseudorapidity |η e | < 2.5, dielectron invariant mass m ee > 5 GeV, and dielectron transverse momentum $p^{ee}_{T}$ < 2 GeV. Differential cross-sections are measured as a function of m ee , average $p^{e}_{T}$, absolute dielectron rapidity |y ee |, and scattering angle in the dielectron rest frame, |cos θ*|, in the inclusive sample, and also with a requirement of no activity in the forward direction. The total integrated fiducial cross-section is measured to be 215 ± 1 (stat) $^{+23}_{-20}$ (syst.) ± 4 (lumi.) μ b. Within experimental uncertainties the measured integrated cross-section is in good agreement with the QED predictions from the Monte Carlo programs STARLIGHT and SUPERCHIC, confirming the broad features of the initial photon fluxes. The differential cross-sections show systematic differences from these predictions which are more pronounced at high |y ee | and |cos θ*| values.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Efficacy of Gadolinium Gallium Garnet (GGG) as a High-Impedance Optical Window for Shock Wave Experiments

We conducted a series of plate impact experiments to examine the efficacy of < 111>-oriented gadolinium gallium garnet (GGG) single crystals as high-impedance optical window for Photonic Doppler velocimetry (PDV) under shock and double-shock loading. At ~ 123 GPa, shocked GGG remains fully transparent to 1550 nm light for at least 250 ns without any signal degradation. Above 135 GPa, PDV data measured through GGG exhibit a gradual loss of fringe contrast following shock entrance, which eventually leads to transparency loss. The duration for which shocked GGG remains transparent decreases with increasing pressure, and at ~ 148 GPa, it becomes opaque within ~ 20–30 ns. This limits the use of GGG as an interferometry window between ~ 110–140 GPa under single shock loading. Within this pressure range, the refractive index of GGG increases linearly with density: n = 1.552 + 0.054ρ. In contrast to single shock loading, where GGG becomes opaque rapidly above ~ 140 GPa, double-shocked GGG remains optically transparent for over 100 ns when it is first shocked to ~ 123 GPa and then reshocked to significantly higher pressures (215–233 GPa). Our findings raise the exciting possibility of GGG being used as a high-impedance optical window in multi-shock and shock-ramp loading experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coupling FeNi alloys and hollow nitrogen-enriched carbon frameworks leads to high-performance oxygen electrocatalysts for rechargeable zinc–air batteries

A dual-template strategy for facile preparation of a bifunctional oxygen electrocatalyst for high-performance rechargeable zinc–air batteries has been reported. Coupling FeNi alloys with hollow nitrogen-doped carbon frameworks concludes in exceptionally high electrocatalytic oxygen reduction and evolution activities. In 1 M KOH, the resulting new material exhibits a superior oxygen evolution activity with a low overpotential of 250 mV to deliver 10 mA cm -2 current density, at which the obtained oxygen reduction performance is also comparable to that of commercial Pt/C and the half-wave potential reaches as high as 0.87 V. As a result, the bifunctional oxygen electrocatalysis performance thus obtained (0.61 V, 1 M KOH) ranks among the best of non-precious oxygen electrocatalysts. Using this new catalyst as an air electrode, the as-prepared rechargeable Zn–air battery shows a high current density of 215 mA cm -2 at a voltage of 1.0 V, large peak power density (310 mW cm -2 ), high potential efficiency (64.7% at 10 mA cm -2 ) and prolonged operation durability. This method provides a means to control the surface features, thereby tuning the catalytic properties of the material, and may open up new possibilities for the rational design and synthesis of new materials for electrochemical applications.

25 ENERGY STORAGE↗

Comparative Spectra of Oxygen-Rich Versus Carbon-Rich Circumstellar Shells: VY Canis Majoris and IRC(plus)10216 at 215-285 GHz

A sensitive (1sigma rms at 1 MHz resolution approx.3 mK) 1 mm spectral line survey (214.5-285.5 GHz) of VY Canis Majoris (VY CMa) and IRC +10216 has been conducted to compare the chemistries of oxygen- and carbon-rich circumstellar envelopes. This study was carried out using the Submillimeter Telescope of the Arizona Radio Observatory with a new Atacama Large Millimeter Array type receiver. This survey is the first to chemically characterize an O-rich circumstellar shell at millimeter wavelengths. In VY CMa, 128 emission features were detected arising from 18 different molecules; and in IRC +10216, 720 lines were observed, assigned to 32 different species. The 1 mm spectrum of VY CMa is dominated by SO, and SiS; in IRC +10216, C4H and SiC2 are the most recurrent species. Ten molecules were common to both sources: CO, SiS, SiO, CS, CN, HCN, HNC, NaCl, PN, and HCO(+). Sulfur plays an important role in VY CMa, but saturated/ unsaturated carbon dominates the molecular content of IRC +102.16, producing CH2NH, for example. Although the molecular complexity of IRC +10216 is greater, VY CMa supports a unique "inorganic" chemistry leading to the oxides PO, AlO, and AlOH. Only diatomic and triatomic compounds were observed in VY CMa, while species with four or more atoms are common in IRC +10216, reflecting carbon's ability to form multiple strong bonds, unlike oxygen. In VY CMa, a new water maser (v2 = 2) has been found, as well as vibrationally excited NaCl. Toward IRC +10216, vibrationally excited CCH was detected for the first time.

Tenebaum, E. D.↗

Aeroacoustic Measurements of a Wing-Flap Configuration

Aeroacoustic measurements are being conducted to investigate the mechanisms of sound generation in high-lift wing configurations, and initial results are presented. The model is approximately 6 percent of a full scale configuration, and consists of a main element NACA 63(sub 2) - 215 wing section and a 30 percent chord half-span flap. Flow speeds up to Mach 0.17 are tested at Reynolds number up to approximately 1.7 million. Results are presented for a main element at a 16 degree angle of attack, and flap deflection angles of 29 and 39 degrees. The measurement systems developed for this test include two directional arrays used to localize and characterize the noise sources, and an array of unsteady surface pressure transducers used to characterize wave number spectra and correlate with acoustic measurements. Sound source localization maps show that locally dominant noise sources exist on the flap-side edge. The spectral distribution of the noise sources along the flap-side edge shows a decrease in frequency of the locally dominant noise source with increasing distance downstream of the flap leading edge. Spectra are presented which show general spectral characteristics of Strouhal dependent flow-surface interaction noise. However, the appearance of multiple broadband tonal features at high frequency indicates the presence of aeroacoustic phenomenon following different scaling characteristics. The scaling of the high frequency aeroacoustic phenomenon is found to be different for the two flap deflection angles tested. Unsteady surface pressure measurements in the vicinity of the flap edge show high coherence levels between adjacent sensors on the flap-side edge and on the flap edge upper surface in a region which corresponds closely to where the flap-side edge vortex begins to spill over to the flap upper surface. The frequency ranges where these high levels of coherence occur on the flap surface are consistent with the frequency ranges in which dominant features appear in far field acoustic spectra. The consistency of strongly correlated unsteady surface pressures and far field pressure fluctuations suggests the importance of regions on the flap edge in generating sound.

Meadows, Kristine R.↗

COMPARATIVE SPECTRA OF OXYGEN-RICH VERSUS CARBON-RICH CIRCUMSTELLAR SHELLS: VY CANIS MAJORIS AND IRC +10216 AT 215-285 GHz

A sensitive (1{sigma} rms at 1 MHz resolution {approx}3 mK) 1 mm spectral line survey (214.5-285.5 GHz) of VY Canis Majoris (VY CMa) and IRC +10216 has been conducted to compare the chemistries of oxygen- and carbon-rich circumstellar envelopes. This study was carried out using the Submillimeter Telescope of the Arizona Radio Observatory with a new Atacama Large Millimeter Array type receiver. This survey is the first to chemically characterize an O-rich circumstellar shell at millimeter wavelengths. In VY CMa, 128 emission features were detected arising from 18 different molecules; and in IRC +10216, 720 lines were observed, assigned to 32 different species. The 1 mm spectrum of VY CMa is dominated by SO{sub 2} and SiS; in IRC +10216, C{sub 4}H and SiC{sub 2} are the most recurrent species. Ten molecules were common to both sources: CO, SiS, SiO, CS, CN, HCN, HNC, NaCl, PN, and HCO{sup +}. Sulfur plays an important role in VY CMa, but saturated/unsaturated carbon dominates the molecular content of IRC +10216, producing CH{sub 2}NH, for example. Although the molecular complexity of IRC +10216 is greater, VY CMa supports a unique 'inorganic' chemistry leading to the oxides PO, AlO, and AlOH. Only diatomic and triatomic compounds were observed in VY CMa, while species with four or more atoms are common in IRC +10216, reflecting carbon's ability to form multiple strong bonds, unlike oxygen. In VY CMa, a new water maser (v {sub 2} = 2) has been found, as well as vibrationally excited NaCl. Toward IRC +10216, vibrationally excited CCH was detected for the first time.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhancement of photoluminescence from defect states in ZnS random photonic crystal: An effect of electronic and photonic mode coupling

This paper reports on the enhanced defect state emission from ZnS in the form of a random photonic crystal (RPC) medium. ZnS photonic crystals with varied randomness are fabricated by colloidal self assembly of ZnS nanospheres (215 ± 10 nm). Reflection and transmission studies reveal mid band gap wavelength at ∼435 nm. The band structure calculated for BCC lattice with reduced packing fraction (53%) is in good agreement with experimental results. The reflection due to the photonic band gap diminishes with increased randomness in the nanosphere arrangement. The features of fluorescence from ZnS are modified in the RPC medium, resulting in suppression at wavelengths in the photonic band gap region and an enhancement at band edge wavelengths of 415 and 468 nm. This enhancement becomes less prominent with increasing randomness in the structure. Interestingly these two modes correspond to the electronic defect states of ZnS. Emission enhancement is shown to be due to the strong coupling of electronic defect states and photonic band edge states which is facilitated by randomly scattering slow Bloch modes in the ZnS RPC. Fabrication of RPCs by colloidal self-assembly with specifically designed degrees of randomness (leading to controllable features of emission) provides scope for the design of low threshold random lasing systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-F-T-626: Intracranial SRS Re-Treatment Without Acquisition of New CT Images

Purpose: Linear accelerator based stereotactic radiosurgery (SRS) for multiple intracranial lesions with frequent surveillance is becoming a popular treatment option. This strategy leads to retreatment with SRS as new lesions arise. Currently, each course of treatment uses magnetic resonance (MR) and computed tomography (CT) images for treatment planning. We propose that new MR images, with course 1 CT images, may be used for future treatment plans with negligible loss of dosimetric accuracy. Methods: Ten patients that received multiple courses of SRS were retrospectively reviewed. The treatment plans and contours from non-initial courses were copied to the initial CTs and recalculated. Doses metrics for the plans calculated on the initial CTs and later CTs were compared. All CT scans were acquired on a Philips CT scanner with a 600 mm field of view and 1 mm slice thickness (Philips Healthcare, Andover, MA). All targets were planned to 20 Gy and calculated in Eclipse V. 13.6 (Varian, Palo Alto, CA) using analytic anisotropic algorithm with 1 mm calculation grid. Results: Sixteen lesions were evaluated. The mean time between courses was 250 +/− 215 days (range 103–979). The mean target volume was 2.0 +/− 2.9 cc (range 0.1–10.1). The average difference in mean target dose between the two calculations was 0.2 +/− 0.3 Gy (range 0.0 – 1.0). The mean conformity index (CI) was 1.28 +/− 0.14 (range 1.07 – 1.82). The average difference in CI was 0.03 +/− 0.16 (range 0.00 – 0.44). Targets volumes < 0.5 cc showed the largest changes in both metrics. Conclusion: Continued treatment based on initial CT images is feasible. Dose calculation on the initial CT for future treatments provides reasonable dosimetric accuracy. Changes in dose metrics are largest for small volumes, and are likely dominated by partial volume effects in target definition.

60 APPLIED LIFE SCIENCES↗

The statistical character of Pc 4 magnetic pulsations at synchronous orbit

A statistical study of 215 magnetic pulsation events identified on the basis of waveform and period as Pc 4 (45- to 150-s period) observed at synchronous orbit by ATS 6 is reported. The study was designed to be similar to that done with Pc 3 (10- to 45-s period) by Arthur et al. (1977). These Pc 4 are found to occur most often near 1800 local time but are observed at all local times. The dominant period is approximately 100 s, but a secondary peak in the distribution occurred at approximately 53 s. They tend to be nearly linearly polarized, principally transverse to the ambient magnetic field. The Pc 4 are found to divide naturally into two classes (radial and azimuthal) on the basis of the azimuth of the major axis of polarization. These classes divide further into low-frequency (less than or equal to 0.015 Hz) and high-frequency (greater than or equal to 0.015 Hz) classes. These four classes organize the remaining wave characteristics quite well. Division of the Pc 4 events into these classes does not lead to identification of a single source mechanism as it did with Pc 3. However, some correspondence between the classes and various proposed mechanisms does exist.

Arthur, C. W.↗

SU-E-J-215: Towards MR-Only Image Guided Identification of Calcifications and Brachytherapy Seeds: Application to Prostate and Breast LDR Implant Dosimetry

Purpose: To identify and analyze the appearance of calcifications and brachytherapy seeds on magnitude and phase MRI images and to investigate whether they can be distinguished from each other on corrected phase images for application to prostate and breast low dose rate (LDR) implant dosimetry. Methods: An agar-based gel phantom containing two LDR brachytherapy seeds (Advantage Pd-103, IsoAid, 0.8mm diameter, 4.5mm length) and two spherical calcifications (large: 7mm diameter and small: 4mm diameter) was constructed and imaged on a 3T Philips MR scanner using a 16-channel head coil and a susceptibility weighted imaging (SWI) sequence (2mm slices, 320mm FOV, TR/ TE= 26.5/5.3ms, 15 degree flip angle). The phase images were unwrapped and corrected using a 32×32, 2D Hanning high pass filter to remove background phase noise. Appearance of the seeds and calcifications was assessed visually and quantitatively using Osirix (http://www.osirix-viewer.com/). Results: As expected, calcifications and brachytherapy seeds appeared dark (hypointense) relative to the surrounding gel on the magnitude MRI images. The diameter of each seed without the surrounding artifact was measured to be 0.1 cm on the magnitude image, while diameters of 0.79 and 0.37 cm were measured for the larger and smaller calcifications, respectively. On the corrected phase images, the brachytherapy seeds and the calcifications appeared bright (hyperintense). The diameter of the seeds was larger on the phase images (0.17 cm) likely due to the dipole effect. Conclusion: MRI has the best soft tissue contrast for accurate organ delineation leading to most accurate implant dosimetry. This work demonstrated that phase images can potentially be useful in identifying brachytherapy seeds and calcifications in the prostate and breast due to their bright appearance, which helps in their visualization and quantification for accurate dosimetry using MR-only. Future work includes optimizing phase filters to best identify and delineate seeds and calcifications.

60 APPLIED LIFE SCIENCES↗

(abstract) The SIR-C/X-SAR Mission

The Shuttle Imaging Radar-C and X-Band Synthetic Aperture Radar (SIR-C/X-SAR) is a cooperative experiment between the National Aeronautics and Space Administration (NASA), the German Space Agency (DARA), and the Italian Space Agency (ASI). The experiment is the next evolutionary step in NASA's Spaceborne Imaging Radar (SIR) program that began with the Seasat SAR in 1978, and continued with SAR -A in 1981 and SAR-B in 1984. The program will eventually lead to the Earth Observing System (EOS) SAR later in this decade. SIR-C will provide increased capability over Seasat, SIR-A, and SIR-B by acquiring polarimetric images simultaneously at two microwave frequencies: L-band (wavelength 24 cm) and C-band (wavelength 6 cm). X-SAR will operate at X-band (wavelength 3 cm) with VV polarization, resulting in a three-frequency capability. Because radar backscatter is most strongly influenced by objects comparable in size to the radar wavelength, this multifrequency capability will provide information about the Earth's surface over a wide range of scales not discernable with single-frequency experiments. The polarimetric data will yield quantitative information about the surface geometric structure, vegetation dielectric properties, and surface discontinuities. The first SIR-C/X-SAR flight is planned for early in 1994, with two subsequent flights in different seasons to enable data aquisition under different environmental conditions. SIR-C/X-SAR will collect data for a period of 6 to 9 days during each flight. The instrument will be flown in a 57(deg) inclination orbit with a nomimal orbit altitude of 215 km. This altitude will result in a slightly drifting orbit. The latest status of the SIR-C/X-SAR mission and instrument design, science activities, and expected results will be presented.

SIR-C/XSAR radar backscatter surface geometric str↗

Emissions mitigation technology for advanced water-lean solvent-based CO 2 capture processes

This technical final report submitted to DOE/NETL presents all the research activities performed during the entirety of DE-FE0031660 project-Emissions Mitigation Technology for Advanced Water-Lean Solvent-Based CO 2 Capture Processes which spans from October 2018 through March 2022. RTI International has been conducting studies from fundamental and operational aspects to reduce the overall amine emissions from the advanced Water-Lean Solvent (WLS) systems, specifically RTI’s Non-Aqueous Solvent (NAS). This technical final report will highlight the key findings from project which align closely to the project objectives which are: Identify the contribution of vapor loss, entrainment, and aerosols to the overall emissions of water-lean systems; Determine the significance of CO 2 capture system operating parameters to the amine emissions; Develop an emissions model based on critical operating parameters; Evaluate the effectiveness of emissions mitigation devices to reduce the amine emissions to <1 ppm under flue coal-fired flue gas; and, Determine the contribution of the ECTs to the overall CO 2 capture cost. The following are the key findings based on numerous tests using both lab-scale setups and parametric testing performed at RTI’s Bench-scale Gas Absorption System (BsGAS). During the BP1, the aerosol generation system and monitoring equipment were installed at BsGAS to produce and determine the aerosol characteristics during the NAS CO 2 capture process. The aerosol produced by this setup produced aerosols with the peak diameter and concentration of 50 micron and 1.2E10 7 cm -3 , respectively. These particle sizes and concentrations are matched to those observed in the actual coal-fired power plant flue gases and expected to be found at the absorber inlet of the CO 2 capture system. Over 1,300 hours of parametric testing have been conducted to evaluate the impact of the aerosols and operating conditions during the CO 2 capture with NAS on the overall amine emissions in the treated flue gas. At the worse condition tested, the presence of the aerosols in the flue gas could increase the overall emissions by 10X compared to the baseline emissions from NAS’s vapor pressure. CO 2 capture rate was found to be a main factor impacting the overall emissions as well as aerosol size and concentrations in the absorber off-gas. The higher CO 2 capture rate, the higher amine emissions in the treated gas. The temperature difference between the temperature bulge seen in the absorber and the water wash temperature also impacts the particle growth where the larger the temperature difference, the more amine emissions from aerosols in the treated gas. The majority of the aerosols did not grow substantially in the system, and the particle concentrations remained nearly constant between the absorber inlet and wash outlet. Only a small portion of the particles were found to grow significantly. The high efficiency demister with mesh size of 5-10 micron can be installed to remove a portion of the aerosols from the gas stream leaving the water wash. Overall, these results from parametric testing have established the emission baseline and validate our assumption on the need of emission control technologies (ECT) in order to minimize the emissions from the baseline NAS CO 2 capture process. Over 2,000 of BsGAS operating hours was used to investigate a handful of process improvements which led to a selection of the vital few changes that effectively control the amine emissions. These process improvements are lime-coated-filters for absorber gas inlet, advanced demister at the top of the absorber, a second water wash with amine recovery unit were designed, installed, and tested at BsGAS at the end of BP1. The result showed that the NAS CO 2 capture process with these additional emission control devices could lower the amine emission in the treated gas to about 1 ppm using a simulated coal-fire flue gas stream. The main contributor in lowering the amine emission came from the second water wash with amine recovery unit where the amine concentration in the scrubbing water was kept below 2 wt% through a continuous amine removal via an adsorbent bed, resulting in a low amine vapor pressure. The adsorbent bed was regenerated via a direct steam regeneration and the recover amine was returned to the absorber to minimize wastewater and makeup amine. A flue gas generation system was designed and installed during the first half of BP2 to support the emission testing using a real coal-derived flue gas. The system is capable of generating both coal- and natural gas- derived flue gases with the composition of the gaseous species highly resemble to that of the power plant flue gases. The particulates detected in the coal-derived flue gas showed the mean diameter of 1 micron. The CO 2 capture operating was then proceed using the real coal-derived flue gas where the amine emission was controlled to be about 0-3 ppm for the total run time of about 200 hours. Similar testing was conducted with natural gas-derived flue gas and the result showed a highly amine emission of 30 ppm under the total run time of 200 hours. The Principal Component Analysis (PCA) and the Partial Least Squares Projection to Latent Structures (PLS) techniques were applied to the parametric testing data to derive a multivariate statistical model. The model was validated and trained with half of the data collected, and the predictive ability of the model was evaluated using the remaining half of the data. The resulting empirical model was capable of predicting the overall emissions from the NAS process without the ECTs with ±15% accuracy (average absolute deviation, AAD) in BP1. As more emission data were obtained under the real coal-flue gas in the BP2, the model incorporated these new set of data to reflect the final process configuration, operating parameters, and amine emission. This results in the updated empirical model predicting the amine emission from the NAS CO 2 capture process with 84% goodness-of-fit (R 2 ), 85% predictability (Q 2 ), and 15% AAD. The study evaluates the use of RTI’s Non-Aqueous Solvent technology for 90% CO 2 capture from a net 650 MWe pulverized coal power plant, downstream of the flue-gas desulfurization unit. The captured CO 2 has a purity of > 95% CO 2 , and is dried, compressed to 15.3 MPa (2,215 psia), ready for sequestration. The analysis uses Case B12B from the DOE Baseline study on Bituminous Coal, Revision 4 where the Cansolv CO 2 capture plant is replaced by the RTI CO 2 Capture plant. The CO 2 capture plant has been sized to capture >90% CO 2 from flue gas derived from a net 650 MWe supercritical pulverized coal power plant. The CO 2 capture plant is equipped with emission control technologies that limits the amine emissions to < 1 ppm. Two different cases were evaluated for the technoeconomic study. The key difference between the two cases is the regenerator pressure. In Case 1, the regenerator operates at 0.195 MPa (28.3 psia), whereas in Case 2, the regenerator pressure is 0.44 MPa (64 psia) thus removing the need for the first stage of compression of the eight-stage compression train. Results from the TEA are compared against the DOE reference cases for SCPC plant with and without CO 2 Capture (Case B12A and Case B12B of the DOE Baseline study, respectively). Case 2 with CO 2 regeneration at higher pressure results in the lower cost of CO 2 capture. The total capital cost of the capture process has been estimated using 2018 dollars in Aspen Process Economic Analyzer and was estimated to be $579 MM. The capture plant operation leads to a total parasitic power loss rate of 96 MWe, resulting in a decrease in pulverized coal power plant efficiency of 7.8% points. The resulting cost of electric power increases from 64.4 mills/kWh, for no capture, to 97.5 mills/kWh, with 90% capture, an increase of 51% in the COE. The cost of capturing 90% CO 2 was estimated to be $38.2/tonne-CO 2 , and meets the DOE target of $40/t-CO 2 . Emission control technologies (ECT) investigated in this project includes a second water wash with use of activated carbon beds for removal of amine from the wash water prior to recirculation in the water wash. These ECT allow operation of the CO 2 capture plant with < 1 ppm amine emissions with the treated flue gas and contributes to $2.4/t-CO 2 captured. Amine emissions derived from thermal and oxidative degradations were investigated under this project along with the emissions derived from aerosols for the NAS system. The thermally degraded of the lean NAS showed less than 4% decreased of the original total amine content in the NAS at 150 °C while the result obtained at 120 °C showed no drop in total amine content, suggesting that thermal degradation of the NAS is minimal. These results also suggested that the thermally degraded species are not likely formed and contributed to the emissions due to the low regeneration temperature of the NAS at 90-105 °C. The oxidative degradation, on the other hand, could become problematic as some of these oxidative degraded species were observed during the NAS-5 testing at National Carbon Capture Center (NCCC) and SINTEF in our previous project. The rapid screening of selected inhibitors suggested that oxidative degradation of NAS can be suppressed using thiol containing compounds in amounts of at least 1 mol%. The detailed mechanistic degradation pathway was conceived for a specific amine used in NAS formulation during BP2. he reduction of the nitrosamines caused by the NO x present in the flue gas was also examined. The study suggested that the thermo-chemical treatment of the NAS solvent would be a more effective and economically viable compared to removing NO x at the DCC.

01 COAL, LIGNITE, AND PEAT↗

Discrete Measurements of the Least Horizontal Principal Stress from Core Data: An Application of Viscoelastic Stress Relaxation

Summary The emerging Paradox Oil Play in southeastern Utah is among the most significant unconventional plays in the western USA. The mean total undiscovered oil resources within just the Pennsylvanian Cane Creek interval of the Paradox Basin are believed to exceed 215 million barrels. However, to date, less than 5% (~9 million barrels) of the total Cane Creek resource has been produced from fewer than 40 wells, and only approximately one-half of those are horizontal wells. More than 95% of production is from the central Cane Creek Unit (CCU). Natural fractures are a key feature of many production wells, but stimulation by induced hydraulic fractures is not consistently successful. We hypothesize that more effective production in this play will rely on better fundamental characterization, especially on better quantification of the state of stress. Approximately 110 ft of core, well logs, and a diagnostic fracture injection test (DFIT) were acquired from the State 16-2 well within the CCU. With these data, we applied two methods to constrain and clarify the state of stress. The first technique, the Simpson’s coefficient method, provides lower bounds on the two horizontal principal stresses and relies on only limited data. Alternatively, the viscoelastic stress relaxation (VSR) method is used to estimate the least horizontal principal stress, building on observations that principal stresses become more isotropic as the viscous behavior of a rock is more pronounced. Results of these two methods support the hypothesis that the state of stress in the CCU of the Paradox Basin is nearly lithostatic and isotropic. Other factors consistent with this hypothesis include high formation pore pressure, which tends to reduce the possible stress states by changing the frictional failure equilibrium; lack of induced fractures in the core, which should be present in the case of stress anisotropy; and interbedded halite layers, which given their high degree of ductility, probably lead to greater VSR for the entire sedimentary package.

Energy & Fuels↗

Gerischer Electrochemistry Today

Semiconductor photoelectrochemistry is a dynamic and interdisciplinary field at the forefront of research in solar fuels, energy conversion, and catalysis. Here, this Perspective captures the collective insights from the second Gerischer Electrochemistry Today Symposium, held at Colorado State University in Fort Collins, CO, in August 2024, which convened leading researchers, early-career scientists, and industry partners to define the critical next steps for the field. Through interactive sessions, technical talks, panel discussions, and training initiatives─including a Semiconductor Electrochemistry Bootcamp─the symposium emphasized three pillars of advancement: (i) facilitating the exchange of new ideas in semiconductor electrochemistry and charge separation; (ii) fostering the development of future researchers, research topics, and participation in the semiconductor workforce; and (iii) building community. This Energy Focus distills key themes from the meeting and identifies major knowledge gaps in the following areas: mechanisms of charge separation and recombination, role of defects and disorder, dynamic and operando characterization methods, interfacial chemistry and surface passivation, theoretical and modeling limitations, and standardization and benchmarking. The inclusive and collaborative structure of the symposium enabled the generation of this comprehensive report that will serve as a roadmap for fundamental and applied research in the rapidly evolving field of semiconductor electrochemistry over the next decade.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intruder negative-parity states of neutron-rich {sup 33}Si

Yrast states in the neutron-rich {sub 14}{sup 33}Si{sub 19} nucleus have been studied using binary grazing reactions produced by the interaction of a 215-MeV beam of {sup 36}S ions with a thin {sup 208}Pb target. An experimental setup that combines the large-acceptance magnetic spectrometer PRISMA and the high-efficiency gamma-ray detection array CLARA was used in the experiment. Four new gamma-ray photopeaks at energies of 971, 1724, 1772, and 2655 keV were observed and assigned to the {sup 33}Si level scheme. The experimental level scheme is compared with the results of 1(Planck constant/2pi)omega p-sd-pf large-scale shell-model calculations using the recently developed PSDPFB effective interaction; good agreement is obtained. The structure of the populated states of {sup 33}Si is discussed within the context of an odd neutron coupled to states of the {sup 32}Si core.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Collectivity in {sup 41}S

Yrast states in the neutron-rich {sup 41}S nucleus have been studied using binary grazing reactions produced by the interaction of a 215-MeV beam of {sup 36}S ions with a thin {sup 208}Pb target. The magnetic spectrometer, PRISMA, and the {gamma}-ray array, CLARA, were used in the measurements. {gamma}-ray transitions of energy 449 and 638 keV were observed. Results from published intermediate-energy Coulomb excitation measurements in combination with those from the present work have led to the construction of a new {sup 41}S level scheme. Proposed J{sup {pi}} values are based on experimental observation and on model-dependent arguments. The level scheme and published electromagnetic transition probabilities are discussed within the context of state-of-art shell-model calculations using the SDPF-U effective interaction. In contrast with the excellent agreement observed in earlier published work, here there are significant discrepancies between experiment and the results of shell-model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

gamma-ray spectroscopy of neutron-rich {sup 40}S

Yrast states up to (6{sup +}) in the neutron-rich {sup 40}S nucleus have been studied using binary grazing reactions produced by the interaction of a 215 MeV beam of {sup 36}S ions with a thin {sup 208}Pb target. The novel experimental setup that combines the large acceptance magnetic spectrometer, PRISMA, and the high-efficiency gamma-ray detection array, CLARA, was used. A new gamma-ray transition at an energy of 1572 keV was observed and tentatively assigned to the (6{sup +})->(4{sup +}) transition. A comparison of experimental observations and the results of large-scale 0(Planck constant/2pi)omega sd-pf shell-model calculations indicates that one- and two-proton excitations from the 2s{sub 1/2} to the 1d{sub 3/2} orbitals play an important role in reproducing the {sup 40}S yrast level structure and the published B(E2;0{sub g.s.}{sup +}->2{sub 1}{sup +}) value. The structure of the yrast states of the even-A isotopes of sulfur is interpreted in terms of the configurations of valence protons and neutrons within the context of large-scale 0(Planck constant/2pi)omega sd-pf shell-model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗