Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “K2O”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Growth of Megaspherulites In a Rhyolitic Vitrophyre

Megaspherulites occur in the middle zone of a thick sequence of rhyolitic vitrophyre that occupies a small, late Eocene to early Oligocene volcanic-tectonic basin near Silver Cliff, Custer County, Colorado. Diameters of the megaspherulites range from 0.3 m to over 3.66 m, including a clay envelope. The megaspherulites are compound spherulites. consisting of an extremely large number (3.8 x 10(exp 9) to 9.9 x 10(exp 9)) of individual growth cones averaging 3 mm long by 1.25 mm wide at their termination. They are holocrystalline, very fine- to fine-grained, composed of disordered to ordered sanidine (orthoclase) and quartz, and surrounded by a thin K-feldspar, quartz rich rind, an inner clay layer with mordenite, and an outer clay layer composed wholly of 15 A montmorillonite. Whole rock analyses of the megaspherulites show a restricted composition from their core to their outer edge, with an average analyses of 76.3% SiO2, 0.34% CaO, 2.17% Na2O, 6.92% K2O, 0.83% H2O+ compared to the rhyolitic vitrophyre from which they crystallize with 71.07% SiO2, 0.57% CaO, 4.06% Na2O,4.l0% K2O, and 6.40% H2O+. The remaining oxides of Fe2O3 (total Fe), A12O3, MnO,MgO, TiO2, P2O5, Cr2O3, and trace elements show uniform distribution between the megaspherulites and the rhyolitic vitrophyre. Megaspherulite crystallization began soon after the rhyolitic lava ceased to flow as the result of sparse heterogeneous nucleation, under nonequilibrium conditions, due to a high degree of undercooling, delta T. The crystals grow with a fibrous habit which is favored by a large delta T ranging between 245 C and 295 C, despite lowered viscosity, and enhanced diffusion due to the high H2O content, ranging between 5% and 7%. Therefore, megaspherulite growth proceeded in a diffusion controlled manner, where the diffusion, rate lags behind the crystal growth rate at the crystal-liquid interface, restricting fibril lengths and diameters to the 10 micron to 15 micron and 3 micron and 8 micron ranges respectively. Once diffusion reestablishes itself at the crystallization front, a new nucleation event occurs at the terminated tips of the fibril cones and a new cone begins to develop with a similar orientation (small angle branching) to the earlier cones. During crystallization, these fibril cones impinge upon each other, resulting in fibril cone-free areas. These cone-free areas consist of coarser, fine-grained phases, dominated by quartz, which crystallized from the melt as it accumulated between the crystallizing K-feldspar fibrils of the cones. The anhydrous nature of the disordered to ordered sanidine (orthoclase) and quartz, suggests that water in the vitrophyre moved ahead of the crystallization front, resulting in a water rich fluid being enriched in Si, K, Na, Mg, Ca, Sr, Ba, and Y. The clay layers associated with the megaspherulites are therefore, the result of the deuteric alteration between the fractionated water and the vitrophyre, as indicated by the presence of the minerals mordenite and montmorillonite. This silica rich fluid also resulted in the total silicification of the megaspherulites within the upper 3 m of the vitrophyre.

Smith, Robert K.↗

Ensemble methods for quantification of potassium oxide in ChemCam Mars and laboratory spectra

In this paper we test new approaches for predicting the amount of element oxides in rock samples from the ChemCam instrument suite onboard the NASA Curiosity rover by focusing on K 2 O. Using the expanded dataset compiled by Gasda et al. (2021) with and without the Earth to Mars (E2M and NoE2M) transformation discussed in Clegg et al. (2017) we trained blended submodels using the “double blending” technique and compared these to ensemble methods (Random Forest, ExtraTrees, and Gradient Boosting Regression). We found that ensemble methods performed similar to blended submodels when looking at RMSE-P on the laboratory spectra and provided significant advantages when looking at spectra coming from Mars. For the full model, blended submodels achieved an RMSE-P of 0.62 and 0.60 (E2M and NoE2M respectively) while Gradient Boosting Regression resulted in a slightly improved RMSE-P of 0.59 and 0.60. More importantly, by employing a local RMSE-P estimation technique where model performance is evaluated based on nearby test samples we found that using ensemble methods can lower the quantification limit for K 2 O from the current value of ≈0.6 wt% to ≈0.08 wt% using Extra Trees and Random Forest. This would allow for a much larger range of K 2 O values to be quantified on Mars with greater certainty given that most targets seen on Mars tend to have <1 wt% K2O. Finally, we used both Mean Decrease in Impurity (MDI) and permutation importance techniques to investigate the wavelengths used by the ensemble methods and found that they correspond to known potassium emission lines. This suggests that ensemble methods can provide an easier to train and improved alternative to blended submodels for predicting potassium compositions from Laser Induced Breakdown Spectroscopy (LIBS) data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials Data on K2Fe2Co2C12N12O by Materials Project

K2O(Fe)2(Co(CN)6)2 crystallizes in the triclinic P1 space group. The structure is zero-dimensional and consists of two iron molecules, one potassium monoxide molecule, and two Co(CN)6 clusters. In each Co(CN)6 cluster, Co2+ is bonded in an octahedral geometry to six N3- atoms. There are a spread of Co–N bond distances ranging from 2.09–2.15 Å. There are six inequivalent C+2.17+ sites. In the first C+2.17+ site, C+2.17+ is bonded in a single-bond geometry to one N3- atom. The C–N bond length is 1.17 Å. In the second C+2.17+ site, C+2.17+ is bonded in a single-bond geometry to one N3- atom. The C–N bond length is 1.17 Å. In the third C+2.17+ site, C+2.17+ is bonded in a single-bond geometry to one N3- atom. The C–N bond length is 1.17 Å. In the fourth C+2.17+ site, C+2.17+ is bonded in a single-bond geometry to one N3- atom. The C–N bond length is 1.17 Å. In the fifth C+2.17+ site, C+2.17+ is bonded in a single-bond geometry to one N3- atom. The C–N bond length is 1.17 Å. In the sixth C+2.17+ site, C+2.17+ is bonded in a single-bond geometry to one N3- atom. The C–N bond length is 1.17 Å. There are six inequivalent N3- sites. In the first N3- site, N3- is bonded in a distorted linear geometry to one Co2+ and one C+2.17+ atom. In the second N3- site, N3- is bonded in a linear geometry to one Co2+ and one C+2.17+ atom. In the third N3- site, N3- is bonded in a linear geometry to one Co2+ and one C+2.17+ atom. In the fourth N3- site, N3- is bonded in a linear geometry to one Co2+ and one C+2.17+ atom. In the fifth N3- site, N3- is bonded in a linear geometry to one Co2+ and one C+2.17+ atom. In the sixth N3- site, N3- is bonded in a linear geometry to one Co2+ and one C+2.17+ atom.

36 MATERIALS SCIENCE↗

Assessment of Potential Dose and Environmental Impacts from Proposed Testing at the INL Radiological Response Training Range

This assessment uses screening-level models to calculate potential environmental impacts from proposed tests at the Idaho National Laboratory (INL) Radiological Response Training Range (RRTR) site. Proposed tests could be conducted using 11 different radioactive material types that include K2O, LaBr3, KBr, Cu, Zr, F, Ga, Ga2O3, NaNO2, Ga-68, and Tc-99m. The tests could potentially release radioactive material to the atmosphere and radionuclides and other contaminants to the soil, which could leach into the unsaturated zone and migrate to the aquifer. Atmospheric transport of radionuclides to potential human receptors and time-integrated air concentrations were calculated with a Gaussian plume model and three years of hourly meteorological data. Potential surface-soil impacts were calculated with the computer program mixing-cell model (MCM). Groundwater impacts were calculated with the computer programs MCM and GWSCREEN. Radiological doses from potential atmospheric releases were calculated for public receptors off the INL Site and for workers at nearby INL facilities. Results were compared to regulatory dose limits. Maximum potential groundwater concentrations were estimated in the aquifer below the NSTR site and compared to drinking water standards or risk-based screening levels for resident tap water. Soil concentrations were calculated and compared to risk-based screening levels for workers and potential future residents. All impacts were estimated assuming 12 tests are conducted annually using all 11 material types for a period of 15 years. This document provides the resources to enable a subject matter expert in the field of environmental assessments to replicate the modeling and calculations. The methodology and parameters are presented in the text. All electronic files, including computer-code input, output, executable files, batch files, scripts, and spreadsheet files are contained in a zip file that can be accessed by selecting “Additional Information” (select Native File) in the INL Electronic Document Management System (EDMS). It is highly unlikely the test scenarios evaluated in this ECAR will adversely impact human health based on comparisons of calculated dose and concentration against regulatory standards and risk-based screening levels. Conservative estimates of dose to workers and the public from atmospheric transport of possible radionuclide releases are far below federal radiation protection standards. Conservative estimates of potential contaminant concentrations in groundwater are less than federal drinking water standards or screening levels. Predicted radionuclide concentrations in surface soils are below risk-based screening levels, except for Ge-68 (material Ga-68) for the worker. The Ge-68 soil concentration can be made less than the worker PRG, if the number of annual tests using Ga-68 is reduced from 12 to 6. However, the sum of ratios still exceeds one because of the high K-40 ratio. If the EF of the worker (number of days the worker is in the contaminated testing area) is reduced from 225 days/yr (default value for full time worker) to 112 days/yr, the Ge-68 ratio is less than one and the sum of ratios is less than one. Actual radiation doses and groundwater and surface-soil concentrations are likely to be much less than those calculated because of the conservative assumptions and parameters employed in the modeling. For example, atmospheric-transport calculations assume the entire inventory of each material type is readily released to the atmosphere and no plume deposition, depletion, or radioactive decay occurs during transport. The calculations also assume the same meteorological conditions (e.g., wind velocity, wind direction, stability class) that produce the maximum 95th percentile concentration (i.e., concentration representing the 95th percentile of a distribution of concentrations derived from 3 years of hourly meteorological data) at each receptor location are the same for all 12 tests during the year, and each receptor is assumed to be present during all 12 tests. The surface-soil assessment assumes the entire inventory of each test is deposited in the top 5 cm of soil. No atmospheric dispersal is assumed, and the radionuclides are subject only to leaching and radioactive decay. The groundwater-pathway modeling is conservative in that it is one-dimensional in the unsaturated zone (no lateral spreading/dilution) and assumes the entire inventory of contaminants infiltrates into the ground at the same location for every test. This is especially conservative for particulate radionuclides because they would have to dissolve or corrode first and some would be dispersed into the atmosphere. The groundwater receptor is also assumed to consume water directly from a hypothetical well positioned in the location of maximum concentration. In addition, conservative degradation rates were used, and volatilization was not considered for the nonradioactive chemical

54 ENVIRONMENTAL SCIENCES↗

A dunite-norite lunar microbreccia.

An olivine-rich microbreccia with noritic affinities, collected on the Apollo 14 mission to Fra Mauro, is described and analyzed. A photomicrograph (by plain transmitted light) of the microbreccia is discussed. One of three distinct areas on the microbreccia is shown to be a dunite containing over 90% olivine. The other two are more gabbroic in composition, though most of the mineral clasts are olivine. The fine grained matrix material contains significant amounts of K2O and P2O5, suggesting a relation to norites.

Taylor, G. J.↗

Effects of vaporization and condensation on Apollo 11 glass spherules - Implications for cooling rates.

Fourteen of 40 glass spherules present in a section of the Apollo 11 microbreccia 10019,22 were found to exhibit steep concentration gradients at their rims; the oxides of the relatively volatile elements Na, K, and P increase by, respectively, factors of up to 67, 16, and greater than 54 at the spherule rims in comparison to the homogeneous centers. These gradients usually extend over 25-30 microns. Furthermore, the natural surfaces of 11 unpolished glass spherules separated from the fines 10084,97, in 60-80% of all cases, show higher concentrations in Na2O, K2O, and P2O5 than the averages for the central portions of 45 independently analyzed glass spherules. It is suggested that the concentration gradients observed are diffusion gradients and are the result of the impact event which produced the glasses; in the impact melting process, splash drops of melt formed that lost volatiles by vaporization. A procedure is described to determine the cooling rate of a spherule from measured concentration gradients, provided the diffusion coefficients are known for the particular glass compositions in question.

Kurat, G.↗

Bulk, rare earth, and other trace elements in Apollo 14 and 15 and Luna 16 samples.

Measurement of 24 and 34 bulk, minor, and trace elements in lunar specimens by instrumental and radiochemical neutron activation analysis shows greater Al2O3, Na2O, and K2O abundances and higher TiO2, FeO, MnO and Cr2O3 depletions in Apollo 14 soil samples as compared to Apollo 11 samples and to most of Apollo 12 samples. The uniform abundances in 14230 core tube soils and three other Apollo 14 soils indicate that the regolith is uniform to at least 22 cm depth and within about 200 m from the lunar module.

Laul, J. C.↗

The Oro Grande, New Mexico, chondrite and its lithic inclusion.

The Oro Grande, New Mexico, U.S.A., chondrite was found in 1971. Electron microprobe analyses and microscopic examination show the following mineralogy: olivine (Fa 19.3 mole %), orthopyroxene (Fs 16.2 mole %), diopside, feldspar (An 13.6 mole %), chlorapatite, whitlockite, kamacite, taenite, troilite, chromite, and an iron-bearing terrestrial weathering product. A bulk chemical analysis of the meteorite shows the following results (weight %): Fe 0.84, Ni 1.46, Co 0.07, FeS 3.62, SiO2 34.18, TiO2 0.14, Al2O3 1.83, Cr2O3 0.55, Fe2O3 21.25, FeO 9.13, MnO 0.31, MgO 21.52, CaO 1.72, Na2O 0.70, K2O 0.08, P2O5 0.25, H2O(+) 2.14, H2O(-) 0.40, C 0.22, sum 100.41. On the basis of composition and texture the Oro Grande meteorite is classified as an H5 chondrite.

Fodor, R. V.↗

Major and trace elements in igneous rocks from Apollo 15.

The concentrations of major and trace elements have been determined in igneous rocks from Apollo 15. All materials analyzed have typical depletions of Eu except for minerals separated from sample 15085. Four samples have concentrations of trace elements that are similar to those of KREEP. The samples of mare basalt from Apollo 15 have higher concentrations of FeO, MgO, Mn, and Cr and lower concentrations of CaO, Na2O, K2O, and rare-earth elements (REE) as compared to the samples of mare basalt from Apollos 11, 12, and 14. The samples can be divided into two groups on the basis of their normative compositions. One group is quartz normative and has low concentrations of FeO while the other is olivine normative and has high concentrations of FeO. The trace element data indicate that the samples of olivine normative basalt could be from different portions of a single lava flow.

Helmke, P. A.↗

Glass-to-metal seals comprising relatively high expansion metals

A glass suitable for glass-to-metal seals that has a resistance to attack by moisture and a high coefficient of linear thermal expansion is introduced. Linear expansion covers the range from 12 to 14 x 10 to the minus 6 C between room temperature and 500 C. The glass is essentially composed of, by molar percent, about 9% of K2O, about 10% of Na2O, about 70% of SiO2, about 6% Al2O3, and about 5% of MgO.

Hirayama, C.↗

Electron Microprobe Analyses of Lithic Fragments and Their Minerals from Luna 20 Fines

The bulk analyses (determined with the broad beam electron microprobe technique) of lithic fragments are given in weight percentages and are arranged according to the rock classification. Within each rock group the analyses are arranged in order of increasing FeO content. Thin section and lithic fragment numbers are given at the top of each column of analysis and correspond to the numbers recorded on photo mosaics on file in the Institute of Meteoritics. CIPW molecular norms are given for each analysis. Electron microprobe mineral analyses (given in oxide weight percentages), structural formulae and molecular end member values are presented for plagioclase, olivine, pyroxene and K-feldspar. The minerals are selected mostly from lithic fragments that were also analyzed for bulk composition. Within each mineral group the analyses are presented according to the section number and lithic fragment number. Within each lithic fragment the mineral analyses are arranged as follows: Plagioclase in order of increasing CaO; olivine and pyroexene in order of increasing FeO; and K-feldspar in order of increasing K2O. The mineral grains are identified at the top of each column of analysis by grain number and lithic fragment number.

Conrad, G. H.↗

Apollo 15 rake sample microbreccias and non-mare rocks: Bulk rock, mineral and glass electron microprobe analyses

Quantitative electron microprobe data of Apollo 15 nonmare rake samples are presented. Bulk analyses of lithic fragments in the nomare rocks (expressed in oxide weight-percent) and the corresponding CIPW molecular norms are given. The mineralogy of the rocks and lithic fragments are also given; structural formulae for complete analyses and molecular end-members for all mineral analyses are included. The mineral analyses include pyroxene, olivine, plagioclase, barian K-feldspar, spinel and ilmenite, cobaltian metallic nickel-iron as well as SiO2-K2O-rich residual glass. Electron micropobe analyses (oxide weight percent) of glasses in loose fines and microbreccia samples and their CIPW molecular norms are presented along with electron microprobe data on bulk, mineral, and matrix glass from chondrules.

Hlava, P. F.↗

Experimental liquid line of descent and liquid immiscibility for basalt 70017

The paper describes one possible liquid line of descent produced for a high-titanium mare basalt composition through an arbitrarily chosen series of partial equilibrium and fractional crystallization experiments on basalt 70017. The liquid line of descent leading to immiscibility at 994 C is characterized by enrichment of FeO, K2O, SiO2, and MnO and depletion of MgO and TiO2 in the residual liquids. The composition of the residual liquid at the onset of immiscibility is ferrobasaltic, and the initial appearance of immiscible liquids in the form of silica-rich spherules is in the vicinity of plagioclase-liquid contacts. The integrated bulk composition of the areas of finely exsolved liquids indicates that the trend of the liquid line of descent is at a small angle to the tie lines joining the two liquids.

Rutherford, M. J.↗

Regolith compositions from the Apollo 17 mission

An investigation of the chemical, mineralogical, and petrographic data from six Apollo 17 regolith samples is summarized. The samples from the center of the Taurus-Littrow valley are very similar in composition and consist of mare basalt and a minor admixture (about 25%) of plagioclase-rich material. The material from Station 9 (Van Serg Crater) contains much less basalt and more breccia and are higher in Al2O3 and lower in TiO2 and FeO than the other mare sites. The chemical compositions of the samples from the North Massif, the South Massif, and the light mantle believed to be of landslide origin, are very similar and correspond to an olivine norite; the relatively high K2O and P2O5 content indicate the presence of a KREEP component. Additional results are described in detail.

Mason, B.↗

Amoeboid olivine aggregates in the Allende meteorite

Greyish-brown irregularly-shaped aggregates composed predominantly of olivine make up nearly 2% of the Allende meteorite by volume. Many of the aggregates are constructed of subspherical lumps of micron-sized crystals of olivine, pyroxene, nepheline and sodalite surrounded by coarser-grained olivine. Rarely, anorthite, spinel and perovskite are also present. The olivine ranges in composition from Fo64 to Fo99. Pyroxenes range from aluminous diopside to hedenbergite to very Al-rich and Ti-Al-rich varieties. The nepheline contains 1.6-2.4% K2O and 1.6-5.2% CaO but the sodalite is significantly poorer in these elements. The spinel contains 2.1-13.4% FeO. Textural information and oxygen isotopic data suggest that the aggregates are composed of primary, solid condensates from the solar nebula. The perovskite, spinel and Ti-Al-rich pyroxenes are the remains of high-temperature condensates, but the olivine compositions and the presence of feldspathoids indicate that some of the grains continued to react with the solar nebular vapor in the temperature range 500-900 K.

Grossman, L.↗

Poikilitic KREEP impact melts in the Apollo 14 white rocks

A KREEP-rich fragment-laden melt series in the Apollo 14 white rocks is interpreted to be the result of impact into a source region possibly consisting of KREEP volcanic rock flows, underlain and surrounded by anorthositic-troctolitic highlands rocks. The melt groundmass is a high-alumina, high-K2O Fra Mauro basalt, enriched in plagioclase. A poikilitic texture is developed in the coarser members of the series, possibly as a result of the impact melt being seeded with relict plagioclase nuclei.

Ryder, G.↗

Reactions of yttria-stabilized zirconia with oxides and sulfates of various elements

The reactions between partially stabilized zirconia, containing 8 weight-percent yttria, and oxides and sulfates of various elements were studied at 1200, 1300, and 1400 C for times to 800, 400, and 200 hours, respectively. These oxides and sulfates represent impurities and additives potentially present in gas turbine fuels or impurities in the turbine combustion air as well as the elements of the substrate alloys in contact with zirconia. Based on the results, these compounds can be classified in four groups: (1) compounds which did not react with zirconia (Na2SO4, K2SO4, Cr2O3, Al2O3 and NiO); (2) compounds that reached completely with both zirconia phases (CaO, BaO, and BaSO4); (3) compounds that reacted preferentially with monoclinic zirconia (Na2O, K2O, CoO, Fe2O3, MgO, SiO2, and ZnO); and (4) compounds that reacted preferentially with cubic zirconia (V2O5, P2O5).

Zaplatynsky, I.↗

High-silica glass inclusions in olivine of Luna-24 samples

Optical examination of nine polished grain mounts of Luna-24 drill-core material (0.09-0.50 mm size) revealed melt inclusions in olivine crystals. Two inclusions consist of clear glass with exceptionally high Si, yet contain no visible daughter minerals and have had no reaction effects with the olivine walls. Their compositions (one has SiO2 93.8, Al2O3 1.51, FeO 2.32, MgO 1.61, CaO 0.06, Na2O less than 0.05, K2O 0.11, total 99.41%; the other is similar) are unique and quite unlike the high-Si high-K melt of granitic composition that is found as inclusions in late-stage minerals of these (and the Apollo) samples, from silicate liquid immiscibility. The host olivines are Fo73 and Fo51. The origin of the melt in the inclusions and the lack of reaction effects are perplexing unsolved problems.

Roedder, E.↗