Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Isomerism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Decay of a microsecond seniority 3 isomeric state in Hf 155

Excited states in the neutron-deficient nuclide Hf 155 have been investigated in experiments performed at the Accelerator Laboratory of the University of Jyväskylä. The Hf 155 nuclei were produced in fusion-evaporation reactions induced by beams of 295 and 315 MeV Ni 58 ions bombarding an isotopically enriched Pd 102 target and separated using the recoil mass separator MARA. An isomeric state having a half-life of 510(30) ns was discovered and is interpreted as a seniority υ = 3 , ( π h 11 / 2 2 ⊗ ν f 7 / 2 ) 27 / 2 − configuration. The γ -ray transitions emitted in the deexcitation of the isomeric state to the ground state were identified and a level scheme was constructed, from which the excitation energy of the isomer was determined to be 2581.5(10) keV. A B ( E 2 ) value of 0.45(3) W.u. was deduced for the 105.4 keV transition depopulating the isomeric state. The deduced level scheme and B ( E 2 ) value are compared with systematics and shell-model calculations. Published by the American Physical Society 2024

Physics↗
DOE OSTI2025

Isomeric yield ratios of fission products: A missing piece in reactor antineutrino summation calculations

The calculation of the spectrum of antineutrinos ($\bar{v}_e$) from a reactor is a complicated problem requiring several nuclear data and physics inputs. Many of these have been investigated thoroughly to improve calculations and properly account for uncertainties. One input which has heretofore escaped consideration is the fission-yield distribution between ground and isomeric states. Here, in this work, we explore the effect of incorporating newly evaluated isomeric yield ratios (IYR) for 43 fission products into summation calculations and identify the disproportionate importance of certain isotopes, particularly at higher energies. Our analysis indicates that updated IYRs contribute to a significant increase in the $\bar{v}_e$ spectrum around and above 7 MeV, with increases of more than 50% at higher energies. Through a detailed sensitivity study, we highlight a number of isotopes for which the IYR has a substantial effect on the $\bar{v}_e$ spectrum. This work stresses the critical role of isomeric yields in calculations of reactor $\bar{v}_e$ spectra and points to the necessity for their accurate experimental determination, especially for key fission products, in order to refine our understanding and address the observed anomalies between measured and calculated $\bar{v}_e$ spectra.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Evidence for an isomeric {pi}½{sup +}[411] state in {sup 183}Ta

We report on the identification of a new isomeric state in Ta populated via the ground-state -decay of Hf. The experiment was performed at the KISS setup at RIKEN, where neutron-rich hafnium isotopes were produced via multi-nucleon transfer (MNT) reactions, followed by laser ionization of hafnium atoms, mass separation, and detection using an electron-gamma coincidence system. Isomeric spectroscopy was carried out by gating on different electron-gamma time correlations. A 459.1 keV -ray transition was identified in delayed spectra, and a half-life of μ was extracted through time-distribution fitting. The 459.1 keV state in Ta is known from previous work and has been assigned a Nilsson orbital configuration of , while a proposed new isomeric state above it is interpreted as a configuration that decays to via a low-energy, unobserved E2 transition. This is consistent with the systematic trends in neighbouring odd-A nuclei and transition rate calculations. Similar content being viewed by others

Doshi, S.↗
DOE OSTI2025

Isomeric Yield Ratios of fission products: a missing piece in reactor antineutrino summation calculations

The calculation of the spectrum of antineutrinos ( $\overline{V}$ e ) from a reactor is a complicated problem requiring several nuclear data and physics inputs. Many of these have been investigated thoroughly to improve calculations and properly account for uncertainties. One input which has heretofore escaped consideration is the fission yield distribution between ground and isomeric states. In this work, we explore the effect of incorporating newly evaluated isomeric yield ratios (IYR) for 43 fission products into summation calculations and identify the disproportionate importance of certain isotopes, particularly at higher energies. Our analysis indicates that updated IYRs contribute to a significant increase in the $\overline{V}$ e spectrum around and above 7 MeV, with increases of more than 50% at higher energies. Through a detailed sensitivity study, we highlight a number of isotopes for which the IYR has a substantial effect on the $\overline{V}$ e spectrum. This work stresses the critical role of isomeric yields in calculations of reactor $\overline{V}$ e spectra and points to the necessity for their accurate experimental determination, especially for key fission products, in order to refine our understanding and address the observed anomalies between measured and calculated $\overline{V}$ e spectra.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

The Dependence of Olefin Hydrogenation and Isomerization Rates on Zirconium Metal–Organic Framework Structure

Zirconium metal–organic frameworks (Zr-MOFs) are a structurally diverse and well-defined class of materials studied in heterogeneous catalysis. Previously, we showed that partial dehydration of the Zr 6 O 8 node in NU-1000 results in heterolytic H 2 cleavage over adjacent Lewis acid and base sites, leading to catalytic conversion of 1-butene. In this work, given the ubiquity of the Zr 6 O 8 node as a secondary building unit (SBU) in Zr-MOFs, with many different potential MOF topologies and capping ligands surrounding the cluster, we study the influence of thermal pretreatments and MOF topology (MOF-808, NU-1000, UiO-66, and NU-1000-NDC) on the activity of the Zr 6 O 8 cluster for H 2 activation and 1-butene hydrogenation and isomerization. Diffuse reflectance IR in the presence of H 2 and pyridine shows that both thermal pretreatment and MOF topology affect the Brønsted acidity of protons generated from H 2 activation and their resulting activity for olefin conversion. High isomerization activity of dehydrated NU-1000 is correlated with the formation of μ 3 OH species after H 2 activation. Additionally, catalytic studies show that the geometry of open coordination sites on individual Zr 6 O 8 nodes influences butene hydrogenation. For this reason, MOF-808 gives anomalously low hydrogenation activity, despite its relatively high total number of open coordination sites, as calculated either from its crystal structure or from NH 3 adsorption. Furthermore, these results reiterate the importance of pretreatment in defining MOF catalytic activity and demonstrate that MOF topology, outside of simply affecting node accessibility, influences reactivity at individual nodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Verifying the structure-property-performance relationship of Y6-based small molecule acceptors by alkoxy-side chain isomerization and conjugated skeleton asymmetry

Non-fullerene small molecule acceptors (NF-SMAs) such as Y6 derivatives were the current working horse for the top performing polymer solar cells (PSCs). For this reason, numerous chemical modifications have been explored for establishing structure–property-performance relationship for Y6-based NF-SMAs. In this work, we explored the isomerization on asymmetrical Y6 derivatives by varying the position of alkoxy side chain on the thiophene linkage between the core and one of the end groups of Y6. The isomers with differences in conformational restriction raised by noncovalent interactions as well as steric hindrance revealed distinctive behavior in crystallization and polymorphism, which led to a significant contrast in PSC performances. Here the X-TO1 molecule with alkoxy side chain facing the end group (outward) displayed preferred molecular configuration and polymorph, delivering power conversion efficiency (PCE) of 15.63%, while its isomer X-TO2 showed coexisted polymorphs significantly increased the charge recombination in the PSC devices led to a low PCE around 3%. This structure–property-performance relationship not only highlighted the elegancy of isomerization in tuning the photovoltaic performances but also identified polymorphism as one of the causes for impairing photovoltaic performances of PSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Contra-Thermodynamic Positional Isomerization of Olefins

A light-driven method for the contra-thermodynamic positional isomerization of olefins is described. In this work, stepwise PCET activation of a more substituted and more thermodynamically stable olefin substrate is mediated by an excited-state oxidant and a Brønsted base to afford an allylic radical that is captured by a Cr(II) cocatalyst to furnish an allylchromium- (III) intermediate. In situ protodemetalation of this allylchromium complex by methanol is highly regioselective and affords an isomerized and less thermodynamically stable alkene product. The higher oxidation potential of the less substituted olefin isomer renders it inert to further oxidation by the excited-state oxidant, enabling it to accumulate in solution over the course of the reaction. A broad range of isopropylidene substrates are accommodated, including enol ethers, enamides, styrenes, 1,3-dienes, and tetrasubstituted alkyl olefins. Mechanistic investigations of the protodemetalation step are also presented.

14 SOLAR ENERGY↗
DOE OSTI2020

Consequences of sp 2 –sp 3 boron isomerization in supercooled liquid borates

In this study, time-resolved high-energy synchrotron x-ray total scattering measurements on supercooled molten lithium metaborate (LiBO 2 ) reveal an isomerization reaction involving conversion of trigonal sp 2 boron to tetrahedral sp 3 boron during quenching and glass formation. Van't Hoff analysis yields an accurate enthalpy change, ΔH = 21(1) kJ mol –1 boron, from which we develop an analytical model for the sp 3 isomer fraction and its contribution to configurational heat capacity (C p conf ) and entropy as a function of temperature and composition. Isomerization constitutes 40% of the total calorimetric C p conf at the glass transition for LiBO 2 and directly contributes to the observed rise in liquid fragility with the lithium content.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Single pot catalyst strategy to branched products via adhesive isomerization and hydrocracking of polyethylene over platinum tungstated zirconia

Hydrocracking is an insufficiently explored route for chemical recycling of plastics waste. Platinum tungstated zirconia (Pt-WZr) was used in a batch reactor at low temperatures of 250 °C and 30 bar H 2 pressure for 1-24 h reaction times using low-density polyethylene (LDPE, M w ~76 kDa). We find Pt-WZr is a bifunctional catalyst for LDPE hydrocracking leading to higher value branched fuel- and lubricant-ranged alkanes. Here we demonstrate that the catalyst metal-to-acid site molar ratio (MAB) shifts the product distribution to larger cracked products and increases the isomerization degree in the residual polymer. We propose a new adhesive isomerization mechanism between the metal and Brønsted acid sites in parallel with slow polymer chain cracking, caused by competitive adsorption of the polymer over the liquid products and stereochemical hindrance of methines. This study provides a blueprint on how to engineer effective catalysts for hydrocracking polyolefin plastic wastes using the MAB as a catalyst descriptor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Direct WIMP detection rates for transitions in isomeric nuclei

The direct detection of dark matter constituents, in particular the weakly interacting massive particles (WIMPs), is central to particle physics and cosmology. In this paper we study WIMP induced transitions from isomeric nuclear states for two possible isomeric candidates: 180 Ta and 166 Ho. The experimental setup, which can measure the possible decay of 180 Ta induced by WIMPs, was proposed. The corresponding estimates of the half-life of 180 Ta are given in the sense that the WIMP-nucleon interaction can be interpreted as ordinary radioactive decay.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Conjugation in Isomeric Cyclosilane Thioethers

Conjugation in thioether-functionalized cyclosilanes depends on both conformation and connectivity. Borane-catalyzed dehydrocoupling of thiophenols with partially hydrogenated cyclosilanes proceeded with high chemoselectivity for Si–H bonds in the presence of Si–Si bonds. Isomeric 1,3- and 1,4-functionalized cyclosilanes afforded isomeric cyclosilane thioethers that also differed in preference for chair or twist-boat conformations as demonstrated by both X-ray crystal structures and density functional theory (DFT) calculations. Here, the confounding effects of different conformations and connectivity could be distinguished with time-dependent DFT (TD-DFT) calculations and validated with experimentally obtained UV–vis spectra.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Allosteric control of olefin isomerization kinetics via remote metal binding and its mechanochemical analysis

Abstract Allosteric control of reaction thermodynamics is well understood, but the mechanisms by which changes in local geometries of receptor sites lower activation reaction barriers in electronically uncoupled, remote reaction moieties remain relatively unexplored. Here we report a molecular scaffold in which the rate of thermal E-to-Z isomerization of an alkene increases by a factor of as much as 10 4 in response to fast binding of a metal ion to a remote receptor site. A mechanochemical model of the olefin coupled to a compressive harmonic spring reproduces the observed acceleration quantitatively, adding the studied isomerization to the very few reactions demonstrated to be sensitive to extrinsic compressive force. The work validates experimentally the generalization of mechanochemical kinetics to compressive loads and demonstrates that the formalism of force-coupled reactivity offers a productive framework for the quantitative analysis of the molecular basis of allosteric control of reaction kinetics. Important differences in the effects of compressive vs. tensile force on the kinetic stabilities of molecules are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fused-ring isomerism modulates molecular packing and device performance in non-halogenated organic solar cells

Subtle changes in molecular backbone geometry impact intermolecular interactions and performance of organic solar cells. Here, three isomeric small-molecule acceptors (NaO1, NaO2, and NaO3) are investigated to reveal how different fused-ring configurations control molecular packing, electronic coupling, and film formation. Structural and spectroscopic analyses show that the linearly fused NaO1 forms a compact three-dimensional packing network with large and balanced electronic couplings (>24 meV) across multiple directions, while the more curved analogues exhibit excessive crystallization and phase segregation. In-situ optical measurements demonstrate that NaO1 promotes fast and continuous structural evolution during film formation, resulting in smooth morphology and homogeneous phase distribution. These structural and dynamic advantages facilitate efficient charge generation and transport, accompanied by reduced non-radiative energy loss, ultimately achieving an efficiency of 20.07% for non-halogenated ternary devices. Our findings highlight how fused-ring isomerism decisively governs structure–packing–performance relationships in organic solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Gas-phase pyrolysis of trans 3-pentenenitrile: competition between direct and isomerization-mediated dissociation

The flash pyrolysis of trans 3-pentenenitrile (3-PN, CH 3 –$CH=CH$–CH 2 –CN) was studied by combining the results of VUV photoionization mass spectra with broadband microwave spectra recorded as a function of the temperature of the pyrolysis tube. The two separated functional groups (vinyl and nitrile) open up isomerization as an initial step in competition with unimolecular dissociation. Primary products were detected by keeping the 3-PN concentration low and limiting reaction times to the traversal time of the gas in the pyrolysis tube (~100 μs). The reaction is quenched and products are cooled by expansion into vacuum before interrogation over the 8–18 GHz region using chirped-pulse broadband methods. 118 nm VUV photoionization of the same reaction mixture provides a means of detecting all products with ionization potentials below 10.5 eV with minimal fragmentation. These results are combined with a detailed computational investigation of the C 5 H 7 N and related potential energy surfaces, leading to a consistent picture of the unimolecular decomposition of 3-PN. Loss of two H-atoms to form a 79 amu product is proven from its microwave transitions to contain trans-Z-2,4-pentadienenitrile, while no pyridine is observed. Methyl loss, HCN loss, and breaking the central C(2)–C(3) bond all occur following isomerization of the position of the double bond, thereby opening up low-energy pathways to these decomposition channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

First observation of isomeric states in 111 Zr, 113 Nb, and 115 Mo

Isomeric states in the neutron-rich nuclei 111 Zr [T 1/2 =0.10 (7) μs] , 113 Nb [T 1/2 =0.7 (4) μs], 115 Mo [T 1/2 =46 (3) μs] were first identified at the Radioactive Ion Beam Factory (RIBF) of RIKEN by using in-flight fission and fragmentation of a 238 U beam at an energy of 345 MeV/u. Here is a brief report of the γ transitions de-exciting from isomeric states and half-lives measurements, which provides the first spectroscopy in the nuclear region of prolate-to-oblate shape-phase transition around mass A ≈110.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

New isomeric transition in Mg 36 : Bridging the N = 20 and N = 28 islands of inversion

Here, we observed a new isomeric γ transition at 168 keV in 36 Mg, with a half-life of T1/2=90⁢($^{+410}_{-50}$) ns. We propose that the observed transition deexcites a new 0 + isomeric state at 833 keV and populates the previously known first 2 + state. The existence of this isomer is consistent with the predictions of the large-scale shell-model calculations of 36 Mg using the sdpf-u-mix interaction. The observed excitation energy of the second 0 + state is caused by the small energy separation between two prolate-deformed configurations where the intruder configuration corresponds to two-neutron excitations from the sd to the pf shell. Within this interpretation, 36 Mg becomes the crossing point between nuclei in which ground state deformed/superdeformed configurations are caused by the dominance of N=20 intruders ( 32,34 Mg) and nuclei where deformed configurations are associated with the breaking of the N=28 closure and a large occupancy of the 1⁢p 3/2 neutron orbit ( 38 Mg and beyond). We found the lack of three-body monopole corrections in other effective interactions results in a predominance of N=20 intruder configurations past 38 Mg incompatible with our observation. We conclude that 36 Mg bridges the N=20 and N=28 islands of inversion, forming the so-called big island of deformation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Excitation functions of proton-induced nuclear reactions on $$^{86}$$Sr, with particular emphasis on the formation of isomeric states in $$^{86}$$Y and $$^{85}$$Y

Abstract Cross sections of proton-induced nuclear reactions on enriched $$^{\mathrm {86}}$$ 86 Sr target were measured by the activation technique up to proton energies of 44 MeV. The isomeric cross-section ratios for $$^{\mathrm {86m,g}}$$ 86 m , g Y and $$^{\mathrm {85m,g}}$$ 85 m , g Y as a function of projectile energy were deduced from their measured data. The present experimental data for the nuclear reaction products, namely $$^{\mathrm {86m}}$$ 86 m Y, $$^{\mathrm {86g+xm}}$$ 86 g + xm Y, $$^{\mathrm {85m}}$$ 85 m Y, $$^{\mathrm {85g}}$$ 85 g Y, $$^{\mathrm {84}}$$ 84 Rb and $$^{\mathrm {83}}$$ 83 Rb were compared with the results of nuclear model calculations using the code TALYS, which combines the statistical, precompound, and direct interactions. In general, the experimental cross-section data as well as the isomeric cross-section ratios are reproduced well by the model calculations, provided the input model parameters are properly chosen and the level structure of the product nucleus is thoughtfully considered. The quality of the agreement between experimental data and model calculations was numerically quantified. For products formed via emission of a light complex particle as well as multi-nucleons (e.g., $$\alpha $$ α and 2p2n), the contribution of the latter process starts increasing when its energy threshold is crossed.

Uddin, M. S.↗
DOE OSTI2024

Excitation functions and isomeric cross-section ratios of (d,xn) reactions on 86 Sr

Excitation functions of the 86 Sr(d,n) 87m,87g Y, 86 Sr(d,2n) 86m,86g Y and 86 Sr(d,3n) 85m,85g Y reactions on enriched 86 Sr target were measured by the activation technique up to deuteron energies of 49 MeV. The isomeric cross-section ratios as a function of projectile energy were deduced from the measured data for 87m Y, 87g Y(cum), 86m Y, 86g Y(cum), 85m Y and 85g Y pairs for the same energy range. All measurements are reported for the first time. The experimental data were compared with the data from the TENDL library which is based on TALYS calculation with default parameters. No satisfactory agreement was observed. Nuclear model calculations were then performed using the codes TALYS and EMPIRE with some parameter adjustments, and compared with the experimental data. The quality of the agreement between experimental data and model calculations was numerically quantified. In general, the data as well as the isomeric cross-section ratios are partially reproduced by the model calculations, provided the input model parameters are properly chosen and the level structure of the product nucleus is thoughtfully considered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗