Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Iron-based Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Dispersion kinks from electronic correlations in an unconventional iron-based superconductor

The attractive interaction in conventional BCS superconductors is provided by a bosonic mode. However, the pairing glue of most unconventional superconductors is unknown. The effect of electron-boson coupling is therefore extensively studied in these materials. A key signature are dispersion kinks that can be observed in the spectral function as abrupt changes in velocity and lifetime of quasiparticles. Here, we show the existence of two kinks in the unconventional iron-based superconductor RbFe 2 As 2 using angle-resolved photoemission spectroscopy (ARPES) and dynami- cal mean field theory (DMFT). In addition, we observe the formation of a Hubbard band multiplet due to the combination of Coulomb interaction and Hund’s rule coupling in this multiorbital systems. We demonstrate that the two dispersion kinks are a consequence of these strong many-body interactions. This interpretation is in line with a growing number of theoretical predictions for kinks in various general models of correlated materials. Our results provide a unifying link between iron-based superconductors and different classes of correlated, unconventional superconductors such as cuprates and heavy-fermion materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Strain-tunable microwave-resonance technique for quantum materials

By integrating a dielectric microwave resonator with a piezoelectric-based strain device, we develop an in situ strain-tunable microwave spectroscopy technique that enables contactless measurements of material properties under strain. To demonstrate the capability of this device, we measure the strain-dependent microwave surface impedance of the representative iron-based superconductor Ba⁢Fe 2 (As 1−𝑥 ⁢P 𝑥 ) 2 at the slightly overdoped composition. We successfully control and observe the suppression of superconductivity under both compressive and tensile anisotropic lattice distortions along the tetragonal [110] T direction, as manifested by changes in the quality factor and resonance frequency shifts of microwave resonance. Furthermore, strain-induced changes in microwave surface resistivity, an extension of conventional DC-limit transport elastoresistivity to the microwave regime, provide information on electronic anisotropy equivalent to that of DC elastoresistivity, while offering a contactless alternative. Furthermore, our strain-tunable cavity therefore serves as a powerful, contactless probe of fundamental material properties under strain and may also potentially facilitate the design of hybrid quantum systems with strain-engineered quantum degrees of freedom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1998

Effect of Composite Fabrication on the Strength of Single Crystal Al2O3 Fibers in Two Fe-Base Alloy Composites

Continuous single-crystal Al2O3 fibers have been incorporated into a variety of metal and intermetallic matrices and the results have consistently indicated that the fiber strength had been reduced by 32 to 50% during processing. Two iron-based alloys, FeNiCoCrAl and FeAlVCMn, were chosen as matrices for Al2O3 fiber reinforced metal matrix composites (MMC) with the goal of maintaining Al2O3 fiber strength after composite processing. The feasibility of Al2O3/FeNiCoCrAl and Al2O3/FeAlVCMn composite systems for high temperature applications were assessed in terms of fiber-matrix chemical compatibility, interfacial bond strength, and composite tensile properties. The strength of etched-out fibers was significantly improved by choosing matrices containing less reactive elements. The ultimate tensile strength (UTS) values of the composites could generally be predicted with existing models using the strength of etched-out fibers. However, the UTS of the composites were less than desired due to a low fiber Weibull modulus. Acoustic emission analysis during tensile testing was a useful tool for determining the efficiency of the fibers in the composite and for determining the failure mechanism of the composites.

Draper, Susan L.↗
DOE OSTI2023

N2-to-NH3 conversion by excess electrons trapped in point vacancies on 5f-element dioxide surfaces

Ammonia (NH 3 ) is one of the basic chemicals in artificial fertilizers and a promising carbon-free energy storage carrier. Its industrial synthesis is typically realized via the Haber−Bosch process using traditional iron-based catalysts. Developing advanced catalysts that can reduce the N 2 activation barrier and make NH 3 synthesis more efficient is a long-term goal in the field. Most heterogeneous catalysts for N 2 -to-NH 3 conversion are multicomponent systems with singly dispersed metal clusters on supporting materials to activate N 2 and H 2 molecules. Herein, we report single-component heterogeneous catalysts based on 5 f actinide dioxide surfaces (ThO 2 and UO 2 ) with oxygen vacancies for N 2 -to-NH 3 conversion. The reaction cycle we propose is enabled by a dual-site mechanism, where N 2 and H 2 can be activated at different vacancy sites on the same surface; NH 3 is subsequently formed by H − migration on the surface via associative pathways. Oxygen vacancies recover to their initial states after the release of two molecules of NH 3 , making it possible for the catalytic cycle to continue. Our work demonstrates the catalytic activities of oxygen vacancies on 5 f actinide dioxide surfaces for N 2 activation, which may inspire the search for highly efficient, single-component catalysts that are easy to synthesize and control for NH 3 conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Magnetostrictive materials for enhanced sensors and electronic components

Magnetostriction is a property of magnetic materials that causes them to change their shape or dimensions when their magnetization changes. Low-cost, mechanically robust magnetostrictive sensors would be valuable for a wide range of applications addressing DOE's energy, environmental, and national security missions. Several examples include monitoring internal conditions of pipelines, enhancing implantable systems for the human body, and improving the electrical grid by providing real time sensors for detecting high impedance faults that may act as ignition sources for forest fires. Historically, magnetostrictive materials tended to be expensive and mechanically brittle, but recent developments in iron-based alloys, especially those that include dilute solutions of rare earth elements, have demonstrated useful magnetostriction values, mechanical robustness, and low costs. This project investigated addition of dilute cerium doping on the magnetostrictive properties of Fe-Ga and Fe-Al alloys. Advanced manufacturing techniques were applied to these materials to take advantage of rapid cooling of the alloy to stabilize desired phases and to make near net shape coupons. These coupons develop significant texturing, offering a route to target microstructures with exceptional performance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pressure-temperature phase diagram of CaK ( Fe 1 – x Mn x ) 4 As 4 ( x = 0.024 )

Resistance measurements on single crystals of CaK(Fe 1–x Mn x ) 4 As 4 (x = 0.024) were performed under hydrostatic pressure up to 5.15 GPa. The pressure dependence of the magnetic and superconducting transition temperatures and that of the superconducting upper critical field are reported. Furthermore, our results show that upon increasing pressure, the magnetic transition temperature T N is suppressed, whereas the superconducting transition temperature T c first increases and then decreases, exhibiting a maximum at a pressure p c corresponding to the intersection of the T N (p) and T c (p) lines. In addition, a minimum in the normalized slope of the superconducting upper critical field as well as a change in the pressure dependence of the inferred superconducting coherence length are observed at p c , suggesting a difference in the Fermi surface of the paramagnetic and antiferromagnetic states. Finally, CaK(Fe 1–x Mn x ) 4 As 4 (x = 0.024) likely goes through a half-collapsed tetragonal phase transition at ~4.3 GPa, further demonstrating that the half-collapsed tetragonal transition pressure in the CaKFe 4 As 4 system is relatively insensitive to transition metal substitution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spin fluctuations in the 112-type iron-based superconductor Ca 0.82 La 0.18 Fe 0.96 Ni 0.04 As 2

Abstract We report time-of-flight inelastic neutron scattering (INS) investigations on the spin fluctuation spectrum in the 112-type iron-based superconductor (FeSC) Ca 0.82 La 0.18 Fe 0.96 Ni 0.04 As 2 (CaLa-112). In comparison to the 122-type FeSCs with a centrosymmetric tetragonal lattice structure (space group I 4 / m m m ) at room temperature and an in-plane stripe-type antiferromagnetic (AF) order at low temperature, the 112 system has a noncentrosymmetric structure (space group P 2 1 ) with additional zigzag arsenic chains between Ca/La layers and a magnetic ground state with similar wavevector Q A F but different orientations of ordered moments in the parent compounds. Our INS study clearly reveals that the in-plane dispersions and the bandwidth of spin excitations in the superconducting CaLa-112 closely resemble to those in 122 systems. While the total fluctuating moments ⟨ m 2 ⟩ ≈ 4.6 ± 0.2 μ B 2 /Fe are larger than 122 system, the dynamic correlation lengths are similar ( ξ ≈ 10 Å). These results suggest that superconductivity in iron arsenides may have a common magnetic origin under similar magnetic exchange couplings with a dual nature from local moments and itinerant electrons, despite their different magnetic patterns and lattice symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Understanding vortex dynamics in CaK(Fe,Ni) 4 As 4 and Ba(Fe,Co) 2 As 2 single crystals under the influence of random point disorder

We report on the influence of doping on vortex dynamics in 3 MeV proton-irradiated single crystals of CaK(Fe 1–x Ni x ) 4 As 4 (1144, x = 0.015, 0.025, and 0.03) and Ba(Fe 1–x Co x ) 2 As 2 (x = 0.04, 0.062, 0.066 and 0.074). Non-irradiated crystals of the 1144 system display superconducting critical temperatures ranging from 31 K for x = 0.015–20.5 K, as doping increases to 0.03. On the other hand, pristine crystals of the 122 system show T c values between 14.6 and 23.6 K, with the maximum T c occurring at intermediate doping levels. The fluence was set at 3 × 10 16 p cm –2 , resulting in a decrease in the T c by around 1.5 K for all samples and significantly affecting the vortex dynamics by reducing the flux creep relaxation compared to previously reported values for unirradiated crystals. Parameters such as vortex pinning energy U 0 and the glassy exponent μ dependencies on doping and magnetic field strength are identified. For the 1144 system, U 0 reaches values approaching 500 K for small fields in samples with T c = 29.3 K (x = 0.015), systematically decreasing to around 200 K as T c falls below 20 K. Furthermore, U 0 decreases as the field increases to 3 T for the same sample, varying from approximately 250 K to 100 K as T c decreases. These changes are typically accompanied by modifications in μ, gradually increasing from values around 1 towards 1.5, corresponding to small bundle relaxation in the collective creep theory. Despite differences in the substitutional disorder and magnetic phase diagram with respect to the 1144 system, the results for 122 single crystals follow a similar tendency in which U 0 usually reduces and μ increase rise as the applied magnetic field is increased. Due to moderate U 0 in these systems (few hundreds of kelvins), the resulting decay of persistent current at liquid helium temperatures is primarily determined by a balance between U 0 and bundle size contribution. Furthermore, these findings provide valuable insights for potential applications of these systems, particularly in the context of intrinsic superconducting parameters and the resulting pinning landscape.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Hund's coupling governed orbital-selective superconductivity in Ba 1−𝑥 ⁢K 𝑥⁢ Fe 2 ⁢As 2

Understanding how strong electronic correlations shape superconductivity remains a central challenge in quantum materials. In multiorbital systems, correlations driven by Hund's coupling can differentiate the behavior of individual orbitals, producing the so-called Hund's metal state. How such orbital-selectivity also governs superconducting pairing, however, has remained largely unexplored experimentally. Here, in this study, we use high-resolution angle-resolved photoemission spectroscopy to systematically map the superconducting gap structure across the phase diagram of the representative iron-based superconductor Ba 1−x K x Fe 2 As 2 . We find that superconductivity evolves in a strongly orbital-dependent manner: the gap associated with the d xy orbital collapses beyond optimal doping while pairing on the d xz /d yz orbitals persists. This behavior mirrors the orbital-selective correlations observed in the normal state and reveals a direct connection between Hund's metal physics and the superconducting pairing landscape. Our results demonstrate that superconducting gaps themselves can serve as a sensitive probe of orbital-dependent correlations and suggest that Hund's coupling plays a central role in shaping pairing in multiorbital superconductors.

Corbae, Elena [SLAC National Accelerator Laborator↗
DOE OSTI2025

Decoding the Oxygen Activity with Iron through Ligand-to-Metal Charge Transfer in Li-Rich Layered Cathodes

The quest for high-energy-density and cost-effective cathode materials has revitalized lithium-rich iron-based oxides, where Fe 3+ ions with their stable half-filled d 5 electronic configuration demonstrate unique potentials in regulating oxygen redox activity through ligand-to-metal charge transfer. Using operando 57 Fe Mössbauer spectroscopy, synchrotron X-ray techniques, and density functional theory calculations, we unravel the enhanced Fe–O redox activity through the LMCT process and the concomitant evolution of local structure distortion in the Li-rich layered system Li 1.2 MO 2 (M = Ni, Mn, Fe). The metastable Fe 4+ intermediates facilitate early activation of oxygen redox through LMCT along with increased delithiation at a lowered potential (below 4.5 V). Here, this process inherently suppresses Jahn–Teller distortion of Fe 4+ and exhibits Fe–O redox dominance over conventional Fe 3+ /Fe 4+ redox in Li-rich oxides. The Fe–O coupling redox exhibits improved initial Coulombic efficiency and 95% capacity retention over 200 cycles at 4.4 V. However, the LMCT process is accompanied by aggravated cation migration and voltage fade at low cutoff potentials, which requires further mitigation for the utilization of Fe–O redox. Overall, these findings demonstrate the regulating mechanism of iron for oxygen redox through LMCT and provide fundamental insights into the design principles for high-performance, cost-effective iron-based cathode materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural phase transition, s ± -wave pairing, and magnetic stripe order in bilayered superconductor La 3 Ni 2 O 7 under pressure

Motivated by the recently discovered high-T c superconductor La 3 Ni 2 O 7 , we comprehensively study this system using density functional theory and random phase approximation calculations. At low pressures, the Amam phase is stable, containing the Y 2- mode distortion from the Fmmm phase, while the Fmmm phase is unstable. Because of small differences in enthalpy and a considerable Y 2- mode amplitude, the two phases may coexist in the range between 10.6 and 14 GPa, beyond which the Fmmm phase dominates. In addition, the magnetic stripe-type spin order with wavevector (π, 0) was stable at the intermediate region. Pairing is induced in the s ± -wave channel due to partial nesting between the M = (π, π) centered pockets and portions of the Fermi surface centered at the X = (π, 0) and Y = (0, π) points. This resembles results for iron-based superconductors but has a fundamental difference with iron pnictides and selenides. Moreover, our present efforts also suggest La 3 Ni 2 O 7 is qualitatively different from infinite-layer nickelates and cuprate superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Direct Conversion of Methane to Ethylene and Acetylene over an Iron-Based Metal–Organic Framework

Conversion of methane (CH 4 ) to ethylene (C 2 H 4 ) and/or acetylene (C 2 H 2 ) enables routes to a wide range of products directly from natural gas. However, high reaction temperatures and pressures are often required to activate and convert CH 4 controllably, and separating C 2+ products from unreacted CH 4 can be challenging. Here, we report the direct conversion of CH 4 to C 2 H 4 and C 2 H 2 driven by non-thermal plasma under ambient (25 °C and 1 atm) and flow conditions over a metal–organic framework material, MFM-300(Fe). The selectivity for the formation of C 2 H 4 and C 2 H 2 reaches 96% with a high time yield of 334 μmol g cat –1 h –1 . At a conversion of 10%, the selectivity to C 2+ hydrocarbons and time yield exceed 98% and 2056 μmol g cat –1 h –1 , respectively, representing a new benchmark for conversion of CH 4 . In situ neutron powder diffraction, inelastic neutron scattering and solid-state nuclear magnetic resonance, electron paramagnetic resonance (EPR), and diffuse reflectance infrared Fourier transform spectroscopies, coupled with modeling studies, reveal the crucial role of Fe–O(H)–Fe sites in activating CH 4 and stabilizing reaction intermediates via the formation of an Fe–O(CH 3 )–Fe adduct. In addition, a cascade fixed-bed system has been developed to achieve online separation of C 2 H 4 and C 2 H 2 from unreacted CH 4 for direct use. Integrating the processes of CH 4 activation, conversion, and product separation within one system opens a new avenue for natural gas utility, bridging the gap between fundamental studies and practical applications in this area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Additive manufacturing of amorphous metal soft magnetic composites

Soft magnet alloys are used as magnetic cores for electric motors, transformers, wind turbines and other power generation systems. Soft magnetic cores are expensive and time consuming to manufacture in the complex shapes required for next-generation devices using conventional press and sinter powder metallurgy. The objective of this effort is to additively manufacture high performance soft magnets, with reduced cost and reduced material waste and 10x lower energy (core) loss at the high operating frequencies of many electric machines. Laser powder bed fusion additive manufacturing is used as the fabrication method. Electrical steel and amorphous alloys atomized powders are used as a feedstock materials. Magnetic cores are printed in topology optimized structures such as the Hilbert curve because this has been shown to reduce energy losses by minimizing the eddy currents that circulate within the magnet at high frequencies. In our project, we succeed in printing FeSi 3.5wt% and FeSi 6.5wt% electrical steels, and iron-based soft magnetic amorphous alloys in the shape of Hilbert and Peano curve topology optimized structures. We found that the Peano curve has a higher cut-off frequency than the Hilbert curve, and that amorphous alloys have high cut-off frequencies and higher mechanical hardness than electrical steels. Processing conditions such as laser power, scan speed, and hatching pattern were optimized to achieve high density prints, and optimize magnetic performance. We find that the printing of amorphous alloy soft magnetic cores may be technoeconomically feasible for large scale applications such as transformers, for which supply chain issues and the labor costs of manual fabrication of magnetic cores is prohibitive in some cases.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Microscopic origin of ultranodal superconducting states in spin- 1 2 systems

Several unconventional superconductors show indications of zero-energy excitations in the superconducting state consistent with the existence of a so-called Bogoliubov-Fermi surface (BFS). In particular, FeSe isovalently substituted with S seems to acquire a nonzero density of states at zero energy at low temperatures as the system goes into the tetragonal phase, consistent with a previously proposed phenomenological theory assuming an anisotropic spin singlet pairing gap coexisting with a nonunitary interband triplet component. Here we search for a microscopic model that can support the coexistence of singlet pairing with other orders, including interband nonunitary triplet pairing with magnetization, and discuss several candidates that indeed stabilize ground states with BFS. We show that with proper choice of the coupling strength of the various orders in our model, spontaneous breaking of C 4 rotational symmetry is realized at low temperatures. This feature resembles the findings of recent angle-resolved photoemission experiments in Fe(Se,S) in the tetragonal phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Universal Superconductivity in FeTe and All‐Iron‐Based Ferromagnetic Superconductor Heterostructures

Abstract Ferromagnetism (FM) and superconductivity (SC) are two of the most famous macroscopic quantum phenomena. However, nature normally does not allow SC and FM to coexist without significant degradation. Here, the first fully iron‐based SC/FM heterostructures, composed of Fe(Te,Se) and Fe 3 GeTe 2 , are introduced, and it is shown that this system exhibits both strong FM and high‐temperature SC with an atomically sharp interface. From this study, it is also discovered that minute level of various cationic dopants can drive otherwise non‐superconducting FeTe films into a SC state. This suggests that the ground state of FeTe is so close to the SC state that it can be driven in and out of the SC state with various other perturbations. Altogether, this shows that Fe‐Te‐based heterostructures provide a unique opportunity to manipulate magnetism, superconductivity, and topological physics, paving the way toward new superconducting technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2026

On the uncertainties in helium generation predictions for fission and fusion alloys

With ongoing advances in fusion and advanced fission reactors, quantifying irradiation effects in materials is critical. Transmutation-induced helium in cladding and structural materials can drive swelling and embrittlement, thereby reducing these components’ lifespans. Yet most studies ignore the considerable uncertainties in predicting helium generation rates. In this work, we created a code wrapper, F-SCATTER, that automatically performs simulations in FISPACT-II. We used this tool to investigate potential variance in helium generation rate, or He/dpa, calculations based on deviations in alloy composition, irradiating neutron flux spectrum, computational methodology, and nuclear data sources. We used 12 wt% Cr HT9 steel as the reference case and observed a 6.5%–98.3% He/dpa spread based on compositional variation within a single chemical specification, a 1.8%–11.5% He/dpa variation upon the incorporation of a 15% artificial uncertainty in flux at each energy, and a He/dpa difference as high as 231% when using ENDF/B-VIII.0 versus TENDL-2021 data libraries. Similar results were found for other prominent iron-based alloys, including Grade 91, castable nano-structured alloy, and 316H—where additional variations exist based on reactor type (e.g. thermal, fast, or fusion) and alloying elements such as carbon, nitrogen, and nickel. Based on the simulated results, we conclude that a significant part of the heat-to-heat variability in swelling responses of Fe-based alloys can be driven by impurity content in alloy compositions, and, therefore, chemical control should be a key element in supply chain design for advanced nuclear energy systems. Furthermore, we provide critical recommendations on best practices for evaluating and reporting helium production and lattice damage rates when computing predictions with multiphysics programs such as FISPACT-II.

FISPACT-II↗
DOE OSTI2023

Interrelationships between nematicity, antiferromagnetic spin fluctuations, and superconductivity: Role of hotspots in FeSe 1 - x S x revealed by high pressure Se 77 NMR study

The sulfur-substituted FeSe, FeSe 1-x S x , is one of the unique systems that provides an independent tunability of nematicity, antiferromagnetism, and superconductivity under pressure (p). Recently, Rana et al. [K. Rana et al., Phys. Rev. B 101, 180503(R) (2020)] reported, from 77 Se nuclear magnetic resonance (NMR) measurements on FeSe 0.91 S 0.09 under pressure, that there exists a clear role of nematicity in the relationship between antiferromagnetic (AFM) spin fluctuations and the superconducting transition temperature (T c ), where the AFM spin fluctuations are more effective in enhancing T c in the absence of nematicity than with nematicity. Here, motivated by the work, we carried out 77 Se NMR measurements on FeSe 1-x S x with x=0.15 and 0.29 under pressure up to 2.10 GPa to investigate the relationship in a wide range of x in the FeSe 1-x S x system. Based on the new results together with the previously reported data for x=0 [P. Wiecki et al., Phys. Rev. B 96, 180502(R) (2017)] and 0.09 [K. Rana et al. Phys. Rev. B 101, 180503(R) (2020)], we established a p–x–temperature (T) phase diagram exhibiting the evolution of AFM spin fluctuations. From the systematic analysis of the NMR data, we found that the superconducting (SC) state in a nematic state arises from a non-Fermi-liquid state with strong stripe-type AFM spin fluctuations, while the SC state without nematicity comes from a Fermi-liquid state with mild stripe-type AFM spin fluctuations. Furthermore, we show that the previously reported impact of nematicity on the relationship between AFM fluctuations and superconductivity holds throughout the wide range of x from x=0 to 0.29 in FeSe 1-x S x under pressure. We discuss the origin of the role of nematicity in terms of the different numbers of hotspots on Fermi surfaces with and without nematicity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Prioritization of Existing Reactor Materials

The Advanced Materials and Manufacturing Technologies (AMMT) Program is aiming at the faster incorporation of new materials and manufacturing technologies into complex nuclear-related systems. An integrated approach, combining advanced characterization, high-throughput and accelerated testing, modeling and simulation, including machine learning and artificial intelligence, will be employed. Although 316H (Fe–[16–18]Cr–[10–14]Ni–[2–3]Mo–[0.04–0.1]C) has been identified as a key alloy to be integrated into the AMMT accelerated alloy qualification approach because of its relevance for many current and future nuclear energy reactors, many other alloys could be considered for the advanced fabrication of innovative, high-performance nuclear components. Argonne National Laboratory (ANL), Idaho National Laboratory (INL), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL) are collaborating on identifying the most promising alloy candidates relevant for the AMMT Program. A selection criteria matrix was established to evaluate the alloys considering their relative importance and technological readiness levels for nuclear energy applications, with a focus on laser powder bed fusion (LPBF). Because of the broad range of potential candidate alloys, ORNL and INL focused on nickel-based alloys, and ANL and PNNL mainly evaluated iron-based alloys. PNNL previously published material scorecards reports on several key alloys, and this report provides a broader overview of iron- and nickel-based candidate alloys, expending beyond alloys well-known to the nuclear community.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗