Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Iodide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Bypassing the yellow phase for extremely stable formamidinium lead iodide perovskite solar cells

INTRODUCTION Formamidinium lead iodide (FAPI) emerged as an ideal material for single-junction perovskite solar cells owing to its near optimal bandgap of 1.45 to 1.5 eV and outstanding thermal stability. However, the photoactive cubic α-phase (3C-FAPI) of FAPI is structurally unstable and undergoes a reconstructive phase transition to the nonperovskite yellow hexagonal δ-phase (2H-FAPI) at ambient temperature. The phase reconstruction from 3C-FAPI to 2H-FAPI could be prevented by alloying methylammonium (MA) or Cs or both at the A-site and Br at the halide site, but this limits long-term durability owing to phase segregation or materials instability. Addressing these challenges requires a rational design strategy to stabilize 3C-FAPI by restricting lattice reconstruction without compromising thermal stability. RATIONALE Two main strategies have emerged to improve the phase stability and film quality of FAPI. Here, the first is a lattice-templating approach, which enables the slow formation of perovskite but it eventually degrades through the formation of yellow phases. The second approach, which has been widely explored, involves additive engineering, using alkyl ammonium halide or mostly chloride-based additives, which provide better control over the crystallization route. However, the FAPI films fabricated using these additives are often alloyed and compromise long-term stability. Moreover, the exact role of Cl has been unclear and speculative, specifically when Cl-based additives are used. Even after using a high additive concentration, the incorporation of Cl in perovskite lattice is rare. RESULTS Guided by synergistic modeling and experimental studies, we developed a coadditive strategy using 15 mol % FACl and 0.5 mol % BA 2 PbI 4 perovskites in combination (where BA is butylammonium) to enable a highly oriented (100) Cl-doped FAPI film with exceptional durability. Synchrotron-based in situ wide-angle x-ray scattering revealed a favorable transition for the coadditive-treated FAPI (FAPI-CA) to the corner-sharing 3C black phase through a progressive transformation through the 2H, 4H, 6H, and 8H phases. Moreover, solid-state 35 Cl nuclear magnetic resonance (NMR) revealed Cl incorporation in the perovskite lattice and, as predicted by modeling, indicated that Cl plays a key role in altering the energetics of both the formation and degradation pathways. The Cl-doped perovskite can completely bypass the expected and energetically favorable degradation pathway via the yellow phase or the 2H-PbI 2 phase. Instead, it undergoes degradation only upon exposure to harsh conditions such as 15-sun illumination and 90°C through the energetically uphill 3R-PbI 2 phase path. A p-i-n device fabricated with FAPI-CA film demonstrated a power conversion efficiency (PCE) of 25.1% with an average of 24.1% (40 devices). The notable film stability translated to other devices and retained 98% of its initial PCE under open-circuit conditions at 85° ± 5°C for 1200 hours. CONCLUSION Our study highlights the decisive role of chloride in regulating both the formation and degradation pathways. This regulation is critical for creating a perovskite film with commercially relevant durability.

Garai, Rabindranath [Rice Univ., Houston, TX (Unit↗
DOE OSTI2026

Quantitative Evaluation of Potassium Iodide Implementation Strategies for Emergency Preparedness and Response

This study evaluates the effectiveness of potassium iodide (KI) distribution strategies in mitigating exposure to radioiodine during severe nuclear power plant accidents. This analysis quantitatively compares various KI distribution methods (pre-distributed versus stockpiles), including scenarios with and without KI administration. The results indicate that differences in distribution strategies impact the projected thyroid dose by at least an order of magnitude. The results also indicate that the timing of KI administration is critical, as expected. For scenarios involving delayed releases of significant quantities of radionuclides, evacuation is the most effective protection strategy regardless of KI distribution method. For scenarios involving rapid releases, retrieving KI from stockpiles can have a detrimental effect. Pre-distributed KI is potentially the most effective approach when used as a supplement to evacuation and sheltering. However, these model results are based on idealized conditions for KI distribution and administration; the actual benefits of KI prophylaxis are likely to be less than estimated in this report due to many variables. The results highlight the importance of considering the cost and rigor of different distribution programs and public compliance with emergency instructions. This report includes suggested research to explore KI distribution plans for advanced reactors.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Why are Lead Iodide‐Based Perovskite Precursor Inks Yellow?

A challenge faced by metal halide perovskite (MHP) photovoltaics is scaling up solution deposition processes to realize rapid and inexpensive manufacturing. The challenge lies in completely understanding and controlling solution speciation, nucleation, and self-assembly of iodoplumbate complexes during solvent evaporation as the liquid transforms into gels and solids. An accurate description of solution species, at all points in the transformation, is a prerequisite to design robust and reliable processes. Here, in this study, the common assumption that initial monoplumbate solution species typically invoked (e.g., [PbI 6 ] 4− ) are certainly not the origin of optical absorbance at >400 nm wavelengths is disproved, as are many large particles of common “intermediate” iodoplumbate phases with face- or edge-sharing connectivity. Instead, a new perspective is offered, involving (partially) corner-sharing iodo(poly)plumbates (>1 Pb 2+ per complex) that experience highly dynamic chemical environments. It is outlined how the MHP field would benefit by elucidating these phenomena. Future work is required to determine the size and kinetic behavior of polyplumbate species, and contextualize these findings in relation to broader trends in materials chemistry beyond MHPs. Ultimately, a complete explanation for the solution speciation, optical absorbance signatures, and the color of MHP precursor inks remains an open challenge to the community.

14 SOLAR ENERGY↗
DOE OSTI2025

Polymorphism and Phase Control in Dion–Jacobson 2D 3-(Aminomethyl)piperidinium-Based Metal Iodide Perovskites

Two-dimensional halide perovskites exhibit rich structural diversity and tunable optoelectronic properties, making them promising materials for energy, sensing, and photonic applications. In this work, we report the structural mapping of four distinct polymorphs, γ (P2 1 /c), β (P4/mbm), α (P4/mmm), and δ (Cmcm) in the two-dimensional iodoplumbate, iodostannate, and iodogermanate perovskite so-called Dion-Jacobson series (3AMP)MI4 (M = Sn, Pb, Ge), where 3AMP is 3-(aminomethyl)piperidinium. The phases exhibit systematic evolution in octahedral distortion, lattice symmetry, and metal–halide geometry, enabling structural control over optoelectronic properties. Notably, the α-phase of (3AMP)SnI 4 represents a rare, ambient-stable, high-symmetry structure for Sn-based perovskites, without a phase transition down to 100 K. Variable-temperature single-crystal diffraction, powder x-ray diffraction (PXRD), and calorimetry reveal metal- and temperature-dependent polymorph interconversions, including the emergence of long range supercell reflections in Pb-rich compositions at low temperature. Optical spectroscopy and photoelectron yield spectroscopy confirm band gap tunability and band alignment trends, highlighting symmetry-dependent shifts and anomalous band gap bowing in mixed-metal systems, verified by electronic structure calculations. Calculations additionally indicate that the higher symmetry phases have reduced electron and hole effective masses compared to the lower symmetry phases.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Temperature-Dependent Speciation of Ni(II) in Molten Chloride, Bromide, and Iodide Salts

Understanding the fundamental speciation and local structure of metal cations─such as nickel, which is present as a corrosion product─in molten salt media is essential for assessing their impact on the thermal and physical properties of salts used for advanced nuclear energy applications. In this study, we employed an integrated approach of combining X-ray absorption spectroscopy (XAS), UV–vis spectroscopy, and ab initio molecular dynamics (AIMD) to investigate the halide-dependent speciation of divalent nickel ions, Ni(II), in LiCl–KCl, LiBr–KBr, and LiI–KI eutectic salt mixtures from room temperature to 600 °C. Our findings show that both halide type and temperature significantly influence the local coordination of nickel in these molten salt systems. A notable aspect of Ni(II) speciation in LiI–KI salts is the formation of a polyiodide species. In conclusion, our findings provide critical insights into metal ion speciation in molten salt systems, enhancing our understanding of the factors that govern the physicochemical properties of these complex fluids.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrolytic gold plating, stripping, and ion transport dynamics through a solid-state iodide perovskite

The pronounced electrochemical reactivity between halide perovskites and metal electrodes can introduce mobile extrinsic metal ions which can cause device instability or enable novel functionalities. Here we systematically investigate the kinetics of gold cation (Au + ) migration in indium tin oxide (ITO)/methylammonium lead triiodide (MAPbI 3 )/Au model devices under long-term potentiostatic biasing. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) analyses reveal that Au + ions, electrochemically generated at the Au anode, traverse the perovskite layer with diffusion coefficients on the order of 10 −11 to 10 −10 cm 2 s −1 and are subsequently reduced at the cathode as Au 0 clusters, resembling metal plating behavior in electrolytic cells and solid-state batteries during charging. Furthermore, reversing the applied bias strips the plated Au 0 , revealing reversibility suitable for bipolar resistive switching devices and providing direct evidence of the electrochemical and ionic nature of Au transport within the perovskite matrix. Quantitatively determining diffusion coefficients and ion concentrations provides foundational inputs for future drift-diffusion modelling opportunities and allows us to relate our findings to implications on long term operation of devices like photovoltaic modules. These results clearly demonstrate the solid-state electrochemical nature of perovskite devices, highlight methods to be more quantitative about ion transport properties, provide and emphasize the importance of disentangling electro-, photo-, photoelectrochemical processes for understanding device performance and unlocking new functionalities.

14 SOLAR ENERGY↗
DOE OSTI2024

Exploring direct photodetachment and photodissociation–photodetachment dynamics of platinum iodide anions (PtI n - , n = 2–5) using cryogenic photoelectron spectroscopy

The direct photodetachment and two-photon photodissociation–photodetachment processes of a series of PtI n - (n = 2–5) anions were systematically studied using cryogenic anion photoelectron spectroscopy and first-principles electronic structure calculations. The adiabatic/vertical detachment energies (ADEs/VDEs) of these anions were determined from their 193 nm photoelectron (PE) spectra, i.e., 3.54/3.63, 4.04/4.09, 4.33/4.36, and 4.37/4.41 eV for n = 2–5, respectively, and well reproduced by B3LYP-D3(BJ)/aug-cc-pVTZ-pp calculations. As the coordination number increases, the electron affinity (EA) of PtI n • (n = 2–5) neutrals (equivalent to the corresponding anion’s ADE) gradually increases, exceeding the EA of Cl at n = 3 and exhibiting superhalogen characteristics for n ≥ 3. Meanwhile, the ground state transition contributed from detaching electrons in the highest occupied molecular orbital gradually evolves from the central metal Pt to the iodine ligands. For the PtI 3 - anion, besides one-photon direct detachment, four distinct two-photon photodissociation–photodetachment channels were identified, and the competition between them was discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparative study of crystallization kinetics and phase segregation of triple cation and methylammonium lead iodide perovskites on moisture probing using synchrotron X-ray based radiation

3D mixed perovskites have achieved substantial success in boosting solar cell efficiency, but the complicated perovskite crystal formation pathway remains mysterious. Here we present detailed crystallization kinetics of mixed perovskites FA 0.83 MA 0.17 Pb(I 0.83 Br 0.17 ) 3 , where FA is formamidinium and MA is methylammonium, with the addition of Cs + to form a triple cation perovskite (3-CAT), in a comparison with the perovskite building block MAPbI 3 (MAPI) via static grazing-incidence wide-angle X-ray scattering (GIWAXS) and micro-diffraction measurements. Spin-coated films produced α-perovskite peaks with no PbI 2 or δ-intermediate phases, which was a promising result for the 3-CAT perovskite from micro-diffraction measurements. However, the 3-CAT did not remain stable on probing with varied relative humidity (RH) conditions as segregation back to the δ-intermediate and PbI 2 phase after 10 s of exposure to an RH value of 11% was found to occur from the GIWAXS results. When RH levels were elevated to over 100%, segregation peaks of PbI 2 and δ-intermediate (2H, 4H and 6H) became conspicuous as the α-phase intensity diminished, unlike for MAPI that remains relatively stable. The possible cause of this is hydrophilic bonds that form between the 3-CAT crystals and the small annealing window of the best composition perovskite (5% Cs + ) film.

Shatsala, Miller (ORCID:0009000927230192)↗
DOE OSTI2025

Adsorptive Capture of Iodide by Metal-Organic Framework from Off-Gas Condensate Simulate

Millions of gallons of liquid nuclear wastes generated due to nuclear weapon development during the Cold War are in tank storage at several Department of Energy (DOE) sites across the country. DOE is responsible for disposal of the tank nuclear waste and clean-up of the contaminated sites. These efforts are complex and challenging technically and are costly financially, with the predicted overall cost reaching $377 billion over the next few decades [1]. The current practice of nuclear waste treatment and tank closure is to separate high-level waste (HLW) and low-level waste (LLW) [2]. The HLW is then vitrified into a borosilicate-based glass waste form [3], while the LLW is immobilized into cementitious grout or vitrified into glass [4]. However, these treatment processes have met unsolved technical problems

Jiang, Junhua [Savannah River National Laboratory ↗
DOE OSTI2025

Controlling Preferred Grain Orientation in Vapor-Deposited Metal-Halide Perovskite Thin Films

Metal-halide perovskites are promising semiconductor materials for light-absorber layers in solar cells due to their optimized band gap, defect tolerance, and relative ease of synthesis. In this work, we demonstrate the viability of vapor transport deposition (VTD), a solvent-free processing method, to realize polycrystalline films of both lead iodide (PbI 2 ) and methylammonium lead iodide (MAPbI 3 ) perovskites showing preferential crystallographic orientation. Notable is the difference in perovskite film texturing observed for sequentially and co-deposited VTD films of MAPbI 3 , as well as the lack of strong preferential orientation in solution-processed MAPbI 3 films. While sequential deposition of the perovskite precursors PbI 2 and methylammonium iodide (MAI) leads to a MAPbI 3 film with a limited preferential grain orientation, co-deposited MAPbI 3 films mirror the orientation of excess PbI 2 present in the film. The latter is confirmed by the similar dependence of preferential orientation for PbI 2 and co-deposited MAPbI 3 on underlayer roughness, as well as the emergence of preferential orientation in MAPbI 3 only when excess PbI 2 is present. Both MAPbI 3 and PbI 2 films show a strong preferred lattice orientation on smooth substrates, while on rougher substrates, this orientation is disrupted. Furthermore, these results are interpreted as excess PbI 2 frustrating the diffusion of MAI in the film, which would otherwise disrupt the preferred orientation, pointing to a notable difference in lattice orientation arising from processing technique and conditions.

Deposition↗
DOE OSTI2026

Light-Driven Iodine Loss and Photoluminescence Homogenization in Mixed-Halide Perovskite Semiconductors

Carrier-induced instabilities in lead halide perovskites are often investigated as either transient phenomena, e.g., photoinduced halide segregation or permanent performance changes, e.g., photodegradation, while the mechanistic links between them remain unclear. Here, we aim to connect these observations by studying a model mixed-halide system, MAPb(Br x I 1–x ) 3 . By combining grazing-incidence X-ray diffraction, photothermal deflection spectroscopy, and photoluminescence measurements with hyperspectral microscopy, we investigate the role of mobile halide defects and local chemistry on reversible and long-term instabilities in these materials. Our results show that mixed-halide perovskites are uniquely susceptible to photoinduced changes with illumination driving initial iodide redistribution (i.e., halide segregation), eventual selective iodine expulsion, and subsequent changes in photoinduced halide segregation behavior. By quantifying structural and compositional changes, we estimate an approximately 3–5% iodine loss in our mixed-halide samples after only 24 h of illumination. Further, using microscale measurements, we identify pre-existing iodide-rich domains as key contributors to both the observed transient photostability and permanent iodine loss in MAPbBrI 2 , and see evidence that extended light soaking results in iodide redistribution that improves optoelectronic homogeneity. Overall, our results emphasize the importance of carrier-induced halide oxidation in creating a dynamic defect landscape in mixed-halide perovskites and provide a framework for interpreting apparent light-driven changes in optoelectronic behavior through the lens of permanent compositional changes.

electrical conductivity↗
DOE OSTI2025

Suppressing Polaronic Defect–Photocarrier Interaction in Halide Perovskites by Pre-distorting Its Lattice

In halide perovskites, photocarriers can have strong polaronic interactions with point defects. For iodide-deficient MAPbI 3 , we found that the Fermi level can shift significantly by 0.6–0.7 eV upon light illumination. This energy level shift is accompanied by the formation of deep electron traps. These experimental observations are consistent with the formation of a Pb–Pb dimer when photoexcited electrons are trapped at an iodide vacancy. Interestingly, we found that this polaronic interaction is suppressed when a portion of MA + cations is replaced by smaller Cs + ions. Density functional theory calculations reveal that Cs-doping can reduce the distance between two Pb atoms across an iodide vacancy, even without electron trapping. The predistortion of the lattice induced by cation replacement resembles the Pb–Pb dimer formed by electron trapping at the defect site, which explains the suppression of light-induced effects observed in the experiment. Furthermore, our finding unveils a counterintuitive strategy to enhance the photostability of halide perovskites by preintroducing distortions into its lattice.

14 SOLAR ENERGY↗
DOE OSTI2025

Evidence for I 2 loss from the perovskite–gas interface upon light-induced halide segregation

Sunlight-induced halide segregation in (CH 3 NH 3 )Pb(Br x I 1−x ) 3 (1 > x > 0.2), which limits obtainable voltages from solar cells with these perovskite absorbers, reverses upon resting in the dark. However, sustained illumination at ca. 1 sun opens a new decomposition pathway, leading to irreversible I 2 loss in an open system. We conclusively show I 2 off-gassing from halide-segregated (CH 3 NH 3 )Pb(Br 0.75 I 0.25 ) 3 by trapping gaseous I 2 and tracking the electronic conductivity of the perovskite, which increases from electron-doping as iodides are oxidized to iodine. Importantly, we show that this reaction occurs across the perovskite-air solid–gas interface, without confounding effects from solvent or reactive solid interfaces. This characterization was conducted under a nitrogen atmosphere, avoiding vacuum- and oxygen-driven I 2 loss pathways. Consistent observations of I 2 loss upon light-soaking CsPb(Br 0.75 I 0.25 ) 3 films show that this reaction is intrinsic to the inorganic framework. We propose that the disruption of iodide-rich domains in the halide-segregated films through I 2 loss can masquerade as a light-induced healing or apparent remixing of the segregated film, when in fact it leads to irreversible decomposition. Although I 2 off-gassing is less likely in bromide-rich solid solutions, light-induced halide segregation brings the iodides into proximity and forms electronic states that are energetically poised to trap and accumulate holes, providing a driving force for I 2 loss. Thus, even bromide-rich mixed-halide perovskite absorbers will benefit from I 2 -impermeable encapsulation for long-term stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Challenges in selecting appropriate electrodes for high-temperature molten salt systems

Based on a specific molten salt (e.g., chloride, fluoride, iodide) investigated, different working and reference electrode materials can be selected considering the chemical and thermal stability of the electrochemical cell components. In this talk, the electrode materials and challenges encountered with a spectro-electrochemical setup installed inside a glovebox, and the solutions implemented to address these challenges, specifically for the chloride and iodide molten salts will be presented. For molten chlorides, the fundamental interactions between neodymium chloride (NdCl3) and Nd metal in lithium chloride-potassium chloride eutectic salt were investigated at 773 K. The electrochemical transitions Nd2+,3+/Nd(s) were analyzed using an inert W electrode with cyclic voltammetry and chronoamperometry techniques, coupled with in-situ UV-Vis spectroscopy to elucidate the kinetic pathways of this disproportionation reaction (eq. 1). Nd(s) + NdCl3 = NdCl2 (1) For molten iodides, the challenges related to working electrode selectivity and present spectro-electrochemical results obtained from cyclic voltammetry measurements conducted at 673 K will be discussed.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Nanoscale Decoupling of Carrier-Phonon Transport in Carbon Nanotube-Halide Perovskite Heterostructures

In conventional semiconductors, electrical and thermal conductivity are typically coupled, posing a challenge in optimizing both simultaneously. Overcoming this inherent trade-off enables strategies for advancing electronic applications. Herein, a strategy is demonstrated to decouple electrical and thermal conductivity trade-off by creating heterostructures of highly conductive single-walled carbon nanotubes (SWCNTs) coated with low conductivity hybrid perovskites. Coating SWCNTs with methylammonium lead iodide perovskite results in an enhancement in electrical conductivity (408-1266 S cm-1) due to p-type doping followed by a threefold decrease of the in-plane thermal conductivity (3.3-1 W m-1 K-1), compared to pristine SWCNTs. Molecular dynamics simulations uncover phonon boundary scattering at the SWCNT/perovskite interface as well as localization of methylammonium-related and softening of the Pb-I-related phonon modes in methylammonium lead iodide perovskite decreasing the thermal conductivity.

14 SOLAR ENERGY↗
DOE OSTI2025

Water reactive polyurethane grouting for deep vadose zone contaminant immobilization

Contaminants in the deep vadose zone (DVZ) pose a long-term threat to groundwater, human health, and the environment. Polyurethane grouting is a type of chemical grouting that is potentially advantageous in immobilizing contaminants in DVZs. Polyurethane resin has low viscosity that makes it feasible to penetrate and fill the pore space between fine particles. Here, in this study a series of laboratory pressure grouting and leaching tests were conducted to simulate and assess the effectiveness of polyurethane grouting for immobilizing contaminants in DVZs. Soil with fine particles was prepared with 127 I (as iodide) that served as a non-radioactive surrogate for radioactive 129 I. After grouting and curing, leaching tests were used to measure and compare contaminant diffusivity and leachability index values. Additionally, changes in porosity and saturated hydraulic conductivity of grouted soil were measured. X-Ray Computer Tomography (XCT) results showed that the cured polyurethane was distributed nearly homogeneously and approximately half of the voids were filled with cured polyurethane. Grouting reduced the saturated hydraulic conductivity of soil by 37 %. The effective diffusivity decreased by more than 80 % as compared with the ungrouted soil. The leachability index of the grouted soil was 6.5; meeting the criteria established by the U.S. Nuclear Regulatory Commission (NRC) standard. The results obtained in this study provide a valuable assessment of polyurethane grouting for iodide immobilization in the DVZ and indicate this approach may be a viable method for contaminant remediation in DVZ soils.

Contaminant Diffusion↗
DOE OSTI2025

Bulky Cation-Modified Interfaces for Thermally Stable Lead Halide Perovskite Solar Cells

Charged conjugated organic molecules offer promising prospects for reducing nonradiative recombination at interfaces in perovskite solar cells, while protecting the active layer from moisture. However, several studies have shown that the heat induced diffusion of these cations leads to irreversible solar cell degradation. Passivation molecules for perovskite can reconstruct the film surface into lower-dimensional phases when exposed to thermal stress, impeding charge extraction and affecting the photoconversion efficiency (PCE) of devices. In this work, we study how molecular interactions between passivation molecules and 3D CsFAPbI 3 perovskite impact stability and charge extraction at the perovskite/hole transport layer interfaces. Two model π- conjugated molecules are studied: 2-([2,2′-bithiophen]-5-yl)ethan-1-aminium iodide (2TI) and 2-(3‴,4′-dimethyl-[2,2′:5′,2″:5″,2‴- quaterthiophen]-5-yl)ethan-1-ammonium iodide (4TmI). We demonstrate that the speed of surface layer reconstruction under thermal stress can be controlled by the cation size and correlate these structural changes with the solar cell performance and stability. Devices treated with 2TI and 4TmI achieve PCEs over 21% and maintain their performance under thermal stress. Our findings demonstrate that thermal stability in PSCs can be achieved via the design engineering of passivation agents, offering a blueprint for developing next-generation passivation molecules.

36 MATERIALS SCIENCE↗