Results for “INTERPLANETARY PROPULSION CONFIGURATION” — Page 2

NASA NTRSDate not supplied

Uranus Flagship-class Orbiter and Probe Using Aerocapture

Exploration of the Ice Giants, especially Uranus, via orbiter and atmospheric probes, is required to answer pressing science questions that have been raised in the latest National Academies of Sciences Planetary Decadal Survey. Since the Ice Giants are the farthest planets from Earth, traditional fully-propulsive orbit insertion missions have transit times to the planetary bodies bordering 13-15 years and require a large amount of propellant (wet mass percentages of around 60-70%) for the orbit insertion maneuver, leaving less mass for the scientific payload and a planetary probe. Aerocapture uses aerodynamic forces generated by flight within a planetary atmosphere to decelerate and achieve orbit insertion. Aerocapture has been considered for several past missions but it has not been demonstrated. However, recent developments in thermal protection systems (TPS), guidance and control (G&C), and interplanetary navigation capabilities show the potential for using rigid, heritage entry vehicle configurations already flown at other planetary bodies for Ice Giants aerocapture. Aerocapture can robustly deliver spacecraft to Ice Giant orbits, while substantially increasing on-orbit payload mass (more than 40%) that can be used for a robust atmospheric entry probe. Additionally, the aerocapture maneuver would reduce the interplanetary transit time by 2-5 years (15-30%) relative to fully-propulsive orbit insertion. Recent work has shown that a flagship-class mission can be conducted in a shorter time than fully-propulsive missions if using aerocapture. This paper will consider the merits of including aerocapture as the orbit-insertion mechanism for a Uranus mission. Specifically, the implications of aerocapture orbit insertion for in-situ atmospheric probes will be discussed. The Uranus Orbiter and Probe concept mission study [3] is considered as the potential payload. Results from a recent NASA Space Technology Mission Directorate (STMD)-funded activity that is designing an aerocapture mission for a Uranus orbiter will be presented.

Soumyo Dutta↗

NASA NTRSDate not supplied

Uranus Flagship-class Orbiter and Probe Using Aerocapture

Exploration of the Ice Giants, especially Uranus, via orbiter and atmospheric probes, is required to answer pressing science questions that have been raised in the latest National Academies of Sciences Planetary Decadal Survey. Since the Ice Giants are the farthest planets from Earth, traditional fully-propulsive orbit insertion missions have transit times to the planetary bodies bordering 13-15 years and require a large amount of propellant (wet mass percentages of around 60-70%) for the orbit insertion maneuver, leaving less mass for the scientific payload and a planetary probe. Aerocapture uses aerodynamic forces generated by flight within a planetary atmosphere to decelerate and achieve orbit insertion. Aerocapture has been considered for several past missions but it has not been demonstrated. However, recent developments in thermal protection systems (TPS), guidance and control (G&C), and interplanetary navigation capabilities show the potential for using rigid, heritage entry vehicle configurations already flown at other planetary bodies for Ice Giants aerocapture. Aerocapture can robustly deliver spacecraft to Ice Giant orbits, while substantially increasing on-orbit payload mass (more than 40%) that can be used for a robust atmospheric entry probe. Additionally, the aerocapture maneuver would reduce the interplanetary transit time by 2-5 years (15-30%) relative to fully-propulsive orbit insertion. Recent work has shown that a flagship-class mission can be conducted in a shorter time than fully-propulsive missions if using aerocapture. This paper will consider the merits of including aerocapture as the orbit-insertion mechanism for a Uranus mission. Specifically, the implications of aerocapture orbit insertion for in-situ atmospheric probes will be discussed. The Uranus Orbiter and Probe concept mission study [3] is considered as the potential payload. Results from a recent NASA Space Technology Mission Directorate (STMD)-funded activity that is designing an aerocapture mission for a Uranus orbiter will be presented.

Soumyo Dutta↗

NASA NTRS1977

A candidate mission using the Shuttle and solar electric propulsion

It is suggested that an out-of-the-ecliptic solar electric propulsion (SEP) mission be performed. Data would be gathered pertaining to the three-dimensional structure of solar features at radio and X-ray wavelengths, the properties of the solar wind as a function of latitude and time, the configuration of the interplanetary field and its relation to solar fields, and the modulations of cosmic rays to determine the spectrum of interstellar cosmic rays. The mission would also, it is thought, demonstrate the capability of SEP for use in Shuttle missions. The SEP spacecraft and the ongoing development of related systems are examined. The weight of a SEP stage is contrasted with the weight of a chemical rocket stage.

Duxbury, J. H.↗

NASA NTRS2018

Exergy Efficiency of Interplanetary Transfer Vehicles

In order to optimize systems, systems engineers require some sort of measure with which to compare vastly different system components. One such measure is system exergy, or the usable system work. Exergy balance analysis models provide a comparison of different system configurations, allowing systems engineers to compare different systems configuration options. This paper presents the exergy efficiency of several Mars transportation system configurations, using data on the interplanetary trajectory, engine performance, and vehicle mass. The importance of the starting and final parking orbits is addressed in the analysis, as well as intermediate hyperbolic escape and entry orbits within Earth and Mars' spheres of influence (SOIs). Propulsion systems analyzed include low-enriched uranium (LEU) nuclear thermal propulsion (NTP), high-enriched uranium (HEU) NTP, LEU methane (CH4) NTP, and liquid oxygen (LOX)/liquid hydrogen (LH2) chemical propulsion.

Owen, Sean T.↗

NASA NTRS2018

Exergy Efficiency of Interplanetary Transfer Vehicles

In order to optimize systems, systems engineers require some sort of measure with which to compare vastly different system components. One such measure is system exergy, or the usable system work. Exergy balance analysis models provide a comparison of different system configurations, allowing systems engineers to compare different systems configuration options. This paper presents the exergy efficiency of several Mars transportation system configurations, using data on the interplanetary trajectory, engine performance, and vehicle mass. The importance of the starting and final parking orbits is addressed in the analysis, as well as intermediate hyperbolic escape and entry orbits within Earth and Mars' spheres of influence (SOIs). Propulsion systems analyzed include low-enriched uranium (LEU) nuclear thermal propulsion (NTP), high-enriched uranium (HEU) NTP, LEU methane (CH4) NTP, and liquid oxygen (LOX)/liquid hydrogen (LH2) chemical propulsion.

Owen, Sean T.↗

NASA NTRS2018

Exergy Efficiency of Interplanetary Transfer Vehicles

In order to optimize systems, systems engineers require some sort of measure with which to compare vastly different system components. One such measure is system exergy, or the usable system work. Exergy balance analysis models provide a comparison of different system configurations, allowing systems engineers to compare different systems configuration options. This paper presents the exergy efficiency of several Mars transportation system configurations, using data on the interplanetary trajectory, engine performance, and vehicle mass. The importance of the starting and final parking orbits is addressed in the analysis, as well as intermediate hyperbolic escape and entry orbits within Earth and Mars' spheres of influence (SOIs). Propulsion systems analyzed include low-enriched uranium (LEU) nuclear thermal propulsion (NTP), high-enriched uranium (HEU) NTP, LEU methane (CH4) NTP, and liquid oxygen (LOX)/liquid hydrogen (LH2) chemical propulsion.

Owen, Sean T.↗

NASA NTRS1982

A review of aeroassisted orbit transfer

The development of a theory of aeroassisted orbital plane change maneuvers and necessary equipment is traced and an assessment is made of potential applications. Synergetic plane changes are effected through a combination of aerodynamic and propulsive forces involving the dip of an orbiting vehicle into the atmosphere, performance of an aerodynamic turn using thrust if necessary, then reboosting into a reconfigured orbit. The Orbiter is noted to possess large synergetic plane change capability, and configurations of spacecraft such as the Venus Orbiting Imaging radar for using aeroassist to brake interplanetary velocities before establishing orbits are described. Technology advances necessary to construct effective aerobrake, aerocapture, and orbital transfer vehicles are explored, including fabrication of inflatable ballutes, lighter L/D configurations, and lifting brakes, which are considered to be minor extensions of current capabilities.

Walberg, G. D.↗

NASA NTRS1978

Thermal analysis of a high energy propulsion system /hydrazine and liquid fluorine/ for a rover class Mars Orbiter

Maintaining cryogenic fluorine at a -189 C during the interplanetary cruise period to Mars is a major thermal problem. At this low temperature the heat rejection by radiation is severely limited and the allowable thermal load to the fluorine tank is less than approximately 8 watts. Previous studies generally constrain the spacecraft to an inline tank configuration which tends to maximize the fluorine tank's view and heat rejection to space. With the Inertial Upper Stage, sufficient stack height may not be available on the Shuttle for an inline tank configuration. Therefore, this study addresses the more thermally constraining side by side tank configuration.

Stultz, J. W.↗

NASA NTRS1981

Spacecraft mission and shielding thermal study for a space-storable fluorine-hydrazine propulsion system

The thermal management and shielding problems related to a space-storable fluorine-hydrazine propulsion system are investigated. The general configuration of a space storable propulsion spacecraft and three types of shield configurations are described in detail. An advanced MLI shielding design is proposed showing good agreement with test data. All examined shield configurations were found to be acceptable for inner as well as outer planetary missions. However, for the latter small local heaters may be required to maintain the fluorine above a minimum required temperature of approximately -350 F. The fluorine/hydrazine system with a 25 percent higher specific impulse than the conventionally used propulsion systems, was suggested for interplanetary missions that require substantial velocity changes.

Jones, J. A.↗

NASA NTRS2015

NASA's Space Launch System Program Update

Hardware and software for the world's most powerful launch vehicle for exploration is being welded, assembled, and tested today in high bays, clean rooms and test stands across the United States. NASA's Space Launch System (SLS) continued to make significant progress in 2014 with more planned for 2015, including firing tests of both main propulsion elements and the program Critical Design Review (CDR). Developed with the goals of safety, affordability, and sustainability, SLS will still deliver unmatched capability for human and robotic exploration. The initial Block 1 configuration will deliver more than 70 metric tons of payload to low Earth orbit (LEO). The evolved Block 2 design will deliver some 130 metric tons to LEO. Both designs offer enormous opportunity and flexibility for larger payloads, simplifying payload design as well as ground and on-orbit operations, shortening interplanetary transit times, and decreasing overall mission risk. Over the past year, every vehicle element has manufactured or tested hardware. An RS-25 liquid propellant engine was hotfire-tested at NASA's Stennis Space Center, Miss. for the first time since 2009 exercising and validating the new engine controller, the renovated A-1 test stand, and the test teams. Four RS-25s will power the SLS core stage. A qualification five-segment solid rocket motor incorporating several design, material, and process changes was scheduled to be test-fired in March at the prime contractor's facility in Utah. The booster also successfully completed its Critical Design Review (CDR) validating the planned design. All six major manufacturing tools for the core stage are in place at the Michoud Assembly Facility in Louisiana, and have been used to build numerous pieces of confidence, qualification, and even flight hardware, including barrel sections, domes and rings used to assemble the world's largest rocket stage. SLS Systems Engineering accomplished several key tasks including vehicle avionics software and hardware build and testing, scale model acoustic and base heating tests. Construction of the Interim Cryogenic Propulsion Stage (ICPS) began. Advanced development provided a look into the future of SLS. Shell buckling knockdown factor testing refined decades-old design margins that added thousands of pounds to rocket payloads. Adaptive manufacturing and structured light scanning development promised to cut the cost and time associated with manufacturing and testing. This paper will provide an overview of the progress made over the past year and provide a glimpse of 2015 milestones and beyond on the way to the first launch in 2018.

May, Todd↗

NASA NTRS2015

NASA's Space Launch System Program Update

Hardware and software for the world's most powerful launch vehicle for exploration is being welded, assembled, and tested today in high bays, clean rooms and test stands across the United States. NASA's Space Launch System (SLS) continued to make significant progress in 2014 with more planned for 2015, including firing tests of both main propulsion elements and the program Critical Design Review (CDR). Developed with the goals of safety, affordability, and sustainability, SLS will still deliver unmatched capability for human and robotic exploration. The initial Block 1 configuration will deliver more than 70 metric tons of payload to low Earth orbit (LEO). The evolved Block 2 design will deliver some 130 metric tons to LEO. Both designs offer enormous opportunity and flexibility for larger payloads, simplifying payload design as well as ground and on-orbit operations, shortening interplanetary transit times, and decreasing overall mission risk. Over the past year, every vehicle element has manufactured or tested hardware. An RS-25 liquid propellant engine was hotfire-tested at NASA's Stennis Space Center, Miss. for the first time since 2009 exercising and validating the new engine controller, the renovated A-1 test stand, and the test teams. Four RS-25s will power the SLS core stage. A qualification five-segment solid rocket motor incorporating several design, material, and process changes was scheduled to be test-fired in March at the prime contractor's facility in Utah. The booster also successfully completed its Critical Design Review (CDR) validating the planned design. All six major manufacturing tools for the core stage are in place at the Michoud Assembly Facility in Louisiana, and have been used to build numerous pieces of confidence, qualification, and even flight hardware, including barrel sections, domes and rings used to assemble the world's largest rocket stage. SLS Systems Engineering accomplished several key tasks including vehicle avionics software and hardware build and testing, scale model acoustic and base heating tests. Construction of the Interim Cryogenic Propulsion Stage (ICPS) began. Advanced development provided a look into the future of SLS. Shell buckling knockdown factor testing refined decades-old design margins that added thousands of pounds to rocket payloads. Adaptive manufacturing and structured light scanning development promised to cut the cost and time associated with manufacturing and testing. This paper will provide an overview of the progress made over the past year and provide a glimpse of 2015 milestones and beyond on the way to the first launch in 2018.

May, Todd↗

NASA NTRS2006

Aerocapture Systems Analysis for a Neptune Mission

A Systems Analysis was completed to determine the feasibility, benefit and risk of an aeroshell aerocapture system for Neptune and to identify technology gaps and technology performance goals. The systems analysis includes the following disciplines: science; mission design; aeroshell configuration; interplanetary navigation analyses; atmosphere modeling; computational fluid dynamics for aerodynamic performance and aeroheating environment; stability analyses; guidance development; atmospheric flight simulation; thermal protection system design; mass properties; structures; spacecraft design and packaging; and mass sensitivities. Results show that aerocapture is feasible and performance is adequate for the Neptune mission. Aerocapture can deliver 1.4 times more mass to Neptune orbit than an all-propulsive system for the same launch vehicle and results in a 3-4 year reduction in trip time compared to all-propulsive systems. Enabling technologies for this mission include TPS manufacturing; and aerothermodynamic methods for determining coupled 3-D convection, radiation and ablation aeroheating rates and loads.

Lockwood, Mary Kae↗

NASA NTRS1974

Advanced planning activity

Selected mission concepts for interplanetary exploration through 1985 were examined, including: (1) Jupiter orbiter performance characteristics; (2) solar electric propulsion missions to Mercury, Venus, Neptune, and Uranus; (3) space shuttle planetary missions; (4) Pioneer entry probes to Saturn and Uranus; (5) rendezvous with Comet Kohoutek and Comet Encke; (6) space tug capabilities; and (7) a Pioneer mission to Mars in 1979. Mission options, limitations, and performance predictions are assessed, along with probable configurational, boost, and propulsion requirements.

Source record↗

NASA NTRS1984

Ring-cusp ion thrusters

The high performance ion thruster technology presented is suitable for either geostationary satellite north-south stationkeeping or interplanetary spacecraft primary propulsion. The thruster employs a ring-cusp magnetic field arrangement for plasma confinement, incurring an ion production cost which at about 100 eV/ion, is approximately half the value for the state-of-the-art J-series mercury ion thruster. A comparison of the average plasma properties existing within the ion-production volumes indicates that the improved performance of the ring-cusp configuration is due to higher electron temperature, confirming the superiority of this design in confining the energetic electrons emitted by the cathode.

Beattie, J. R.↗

NASA NTRS2004

Neptune Aerocapture Systems Analysis

A Neptune Aerocapture Systems Analysis is completed to determine the feasibility, benefit and risk of an aeroshell aerocapture system for Neptune and to identify technology gaps and technology performance goals. The high fidelity systems analysis is completed by a five center NASA team and includes the following disciplines and analyses: science; mission design; aeroshell configuration screening and definition; interplanetary navigation analyses; atmosphere modeling; computational fluid dynamics for aerodynamic performance and database definition; initial stability analyses; guidance development; atmospheric flight simulation; computational fluid dynamics and radiation analyses for aeroheating environment definition; thermal protection system design, concepts and sizing; mass properties; structures; spacecraft design and packaging; and mass sensitivities. Results show that aerocapture can deliver 1.4 times more mass to Neptune orbit than an all-propulsive system for the same launch vehicle. In addition aerocapture results in a 3-4 year reduction in trip time compared to all-propulsive systems. Aerocapture is feasible and performance is adequate for the Neptune aerocapture mission. Monte Carlo simulation results show 100% successful capture for all cases including conservative assumptions on atmosphere and navigation. Enabling technologies for this mission include TPS manufacturing; and aerothermodynamic methods and validation for determining coupled 3-D convection, radiation and ablation aeroheating rates and loads, and the effects on surface recession.

Lockwood, Mary Kae↗

NASA NTRS2011

Z-Pinch Fusion Propulsion

Fusion-based nuclear propulsion has the potential to enable fast interplanetary transportation. Shorter trips are better for humans in the harmful radiation environment of deep space. Nuclear propulsion and power plants can enable high Ispand payload mass fractions because they require less fuel mass. Fusion energy research has characterized the Z-Pinch dense plasma focus method. (1) Lightning is form of pinched plasma electrical discharge phenomena. (2) Wire array Z-Pinch experiments are commonly studied and nuclear power plant configurations have been proposed. (3) Used in the field of Nuclear Weapons Effects (NWE) testing in the defense industry, nuclear weapon x-rays are simulated through Z-Pinch phenomena.

Miernik, Janie↗

NASA NTRS1976

Solar sail mission applications

The paper discusses the concept and the current baseline configuration of a reusable solar sail vehicle using light pressure for propulsion. The range of characteristic accelerations which solar sail vehicles might achieve during early years of operation is estimated to be from 0.2 to 1.3 mm/sq sec, with overall sail efficiency about 80 to 90%. Operating without the expenditure of propellant, the vehicle has the potential of delivering large payloads throughout the solar system. Detailed attention is given to various possible missions of the solar sail vehicle operating as an Interplanetary Shuttle. The vehicle may deliver payloads to the inner planets, asteroids, short period comets, or sun polar orbits and then return to earth, possibly with samples. It may also be used for outer planet missions or solar system escape. An 800-m sail may return samples totaling 200 kg from Mars and deliver them to an earth orbital laboratory. The first mission for the solar sail may be rendezvous with Halley's comet in 1982.

Wright, J. L.↗

NASA NTRS1990

Nuclear thermal rockets using indigenous extraterrestrial propellants

A preliminary examination of a concept for a Mars and outer solar system exploratory vehicle is presented. Propulsion is provided by utilizing a nuclear thermal reactor to heat a propellant volatile indigenous to the destination world to form a high thrust rocket exhaust. Candidate propellants, whose performance, materials compatibility, and ease of acquisition are examined and include carbon dioxide, water, methane, nitrogen, carbon monoxide, and argon. Ballistics and winged supersonic configurations are discussed. It is shown that the use of this method of propulsion potentially offers high payoff to a manned Mars mission. This is accomplished by sharply reducing the initial mission mass required in low earth orbit, and by providing Mars explorers with greatly enhanced mobility in traveling about the planet through the use of a vehicle that can refuel itself each time it lands. Thus, the nuclear landing craft is utilized in combination with a hydrogen-fueled nuclear-thermal interplanetary launch. By utilizing such a system in the outer solar system, a low level aerial reconnaissance of Titan combined with a multiple sample return from nearly every satellite of Saturn can be accomplished in a single launch of a Titan 4 or the Space Transportation System (STS). Similarly a multiple sample return from Callisto, Ganymede, and Europa can also be accomplished in one launch of a Titan 4 or the STS.

Zubrin, Robert M.↗