Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM IONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Transmission electron microscopy of the amorphization of copper indium diselenide by in situ ion irradiation

Copper indium diselenide (CIS), along with its derivatives Cu(In,Ga)(Se,S){sub 2}, is a prime candidate for use in the absorber layers of photovoltaic devices. Due to its ability to resist radiation damage, it is particularly well suited for use in extraterrestrial and other irradiating environments. However, the nature of its radiation hardness is not well understood. In this study, transmission electron microscopy (TEM) with in situ ion irradiation was used to monitor the dynamic microstructural effects of radiation damage on CIS. Samples were bombarded with 400 keV xenon ions to create large numbers of atomic displacements within the thickness of the TEM samples and thus explore the conditions under which, if any, CIS could be amorphized. By observing the impact of heavily damaging radiation in situ--rather than merely the end-state possible in ex situ experiments--at the magnifications allowed by TEM, it was possible to gain an understanding of the atomistic processes at work and the underlying mechanism that give rise to the radiation hardness of CIS. At 200 K and below, it was found that copper-poor samples could be amorphized and copper-rich samples could not. This difference in behavior is linked to the crystallographic phases that are present at different compositions. Amorphization was found to progress via a combination of one- and two-hit processes. The radiation hardness of CIS is discussed in terms of crystallographic structures/defects and the consequences these have for the ability of the material to recover from the effects of displacing radiation.

36 MATERIALS SCIENCE↗

In situ analyses on negative ions in the indium-gallium-zinc oxide sputtering process

The origin of negative ions in the dc magnetron sputtering process using a ceramic indium-gallium-zinc oxide target has been investigated by in situ analyses. The observed negative ions are mainly O{sup -} with energies corresponding to the target voltage, which originates from the target and barely from the reactive gas (O{sub 2}). Dissociation of ZnO{sup -}, GaO{sup -}, ZnO{sub 2}{sup -}, and GaO{sub 2}{sup -} radicals also contributes to the total negative ion flux. Furthermore, we find that some sputtering parameters, such as the type of sputtering gas (Ar or Kr), sputtering power, total gas pressure, and magnetic field strength at the target surface, can be used to control the energy distribution of the O{sup -} ion flux.

36 MATERIALS SCIENCE↗

Thermodynamic Investigation of the Effect of Target Compositions and Conditions of Their Magnetron Sputtering on Phase Compositions of the Resulting Films

A thermodynamic investigation of plasmochemical processes taking place in a magnetron during sputtering of the targets consisting of indium and dysprosium ions is performed, which allowed identifying the feasibility of forming under the given conditions certain amounts of the chemical compounds In{sub 2}O{sub 3}, Dy{sub 2}O{sub 3}, DyInO{sub 3}. In the thermodynamic analysis of the equilibrium compositions during magnetron sputtering of the films, a universal TERRA software program is used.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase diagram of SrO-InO{sub 1.5}-CoO{sub x} and a new compound Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6}

Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6}, isostructural to Ca{sub 3}Co{sub 2}O{sub 6}, is revealed by the study of the phase relations in the system SrO-InO{sub 1.5}-CoO{sub x} (1000 {sup o}C). The structure of Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} is refined by the combination of powder X-ray and neutron diffraction. Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} crystallizes in a trigonal lattice with the cell parameters a=b=9.59438(3) A, c=11.02172(4) A with the space group R-3c. Its structure possesses 1D (In/Co)O{sub 3} chains running along the c-axis constructed by alternating face-sharing CoO{sub 6} octahedra and (In{sub 0.9}Co{sub 0.1})O{sub 6} trigonal prisms. The co-occupation of In{sup 3+} and Co{sup 3+} at the trigonal prismatic site is evidenced by elementary analysis and determined by the structure refinement. Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} is paramagnetic, and the susceptibility is consistent with the occupation of Co{sup 3+} at 10% of the trigonal prismatic positions in a high spin state (HS, S=2). The HS Co{sup 3+} is well separated by diamagnetic CoO{sub 6} octahedra and InO{sub 6} trigonal prisms and shows a g factor of 2.0 in the magnetic measurements. -- Graphical abstract: Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} possesses 1D chains constructed by alternating face-sharing CoO{sub 6} octahedra and (In{sub 0.9}Co{sub 0.1})O{sub 6} trigonal prisms. The high spin Co{sup 3+} (S=2) in trigonal prism shows a g factor of 2.0. Display Omitted Research highlights: {yields} Phase diagram of SrO-InO{sub 1.5-}CoO{sub x} at 1000 {sup o}C in air atmosphere is presented. {yields} A new compound Sr{sub 3}In{sub 0.9}Co{sub 1.1}O{sub 6} that is isostructural to Ca{sub 3}Co{sub 2}O{sub 6} is revealed. {yields} 1D chain is formed by alternating face-sharing CoO{sub 6} octahedra and (In{sub 0.9}Co{sub 0.1})O{sub 6} trigonal prisms.{yields} Co{sup 3+} at trigonal prismatic site is in high spin state (S=2) with a g factor of 2.0.

36 MATERIALS SCIENCE↗

Effect of Mn doping on the structural, optical, and magnetic properties of In{sub 2}O{sub 3} films

(In{sub 1−x}Mn{sub x}){sub 2}O{sub 3} films were grown by radio frequency-magnetron sputtering technique. Effect of Mn doping on the structural, optical, and magnetic properties of films is investigated systematically. The detailed structure analyses suggest that Mn ions substitute for In{sup 3+} sites of the In{sub 2}O{sub 3} lattice in the valence of +2 states, and Mn-related secondary phases or clusters as the source of ferromagnetism is safely ruled out. All films show typical room temperature ferromagnetism. The saturation magnetization M{sub s} increases first, and then decreases, while carrier concentration n{sub c} decreases monotonically with Mn doping, implying that the ferromagnetism is not directly induced by the mediated carriers. The optical bandgap E{sub g} of films decreases monotonically with the increase of Mn concentration, and there exists a linear functional dependence between E{sub g} and n{sub c}{sup 2/3}, which is consistent with Burstein-Moss shift arguments. It can be concluded that the ferromagnetic order in Mn-doped In{sub 2}O{sub 3} films is intrinsic, arising from Mn atoms substitution for the In sites of In{sub 2}O{sub 3} lattice. The oxygen vacancies play a mediation role on the ferromagnetic couplings between the Mn ions.

36 MATERIALS SCIENCE↗

Electron affinity of indium and the fine structure of In{sup -} measured using infrared photodetachment threshold spectroscopy

Binding energies of the fine-structure levels of the indium negative ion In{sup -} are measured using infrared photodetachment threshold spectroscopy. The relative cross section for neutral atom production is measured with a crossed ion-beam-laser-beam apparatus over selected photon energy ranges between 300 and 700 meV. An s-wave threshold is observed due to the opening of the In{sup -} (5p{sup 23}P{sub 0}) to In(5p{sup 2}P{sub 1/2}) ground-state-to-ground-state transition, which determines the electron affinity of In to be 383.92(6) meV. The present result is in good agreement with previous theoretical calculations, but it differs substantially from the previously measured electron affinity and reduces the uncertainty by a factor of 150. s-wave thresholds are also observed for detachment from the excited fine-structure levels of In{sup -}, permitting accurate determination of the fine-structure intervals of 76.06(7) meV for J=0-1 and 170.6(6) meV for J=0-2, which are in good agreement with the previous measurements and substantially reduce the uncertainties.

74 ATOMIC AND MOLECULAR PHYSICS↗

SHI Induced Modifications in CdS/CuInSe{sub 2} Thin Film: XRD Analysis

CuInSe{sub 2}(CIS nanostructured) thin films were prepared by ion exchange method at room temperature on ITO coated glass substrates in an alkaline medium. The as prepared thin films were irradiated by 120 MeV Au{sup 9+} swift heavy ion (SHI) at 5x10{sup 11} and 5x10{sup 12} ions/cm{sup 2} fluence respectively. To study the effect of irradiation, the pristine and irradiated nanostructured thin films were characterized by X ray Diffraction (XRD) and analyzed the improvement in crystalline quality and crystallite size. The observed structural modifications discussed considering the high electronic energy deposition by 120 MeV gold heavy (Au{sup 9+}) ions in CuInSe{sub 2} thin films.

36 MATERIALS SCIENCE↗

Defect redistribution in postirradiation rapid-thermal-annealed InN

We have applied positron annihilation to study point defects in 2 MeV {sup 4}He{sup +}-irradiated and subsequently rapid-thermal-annealed (RTA) InN grown by molecular-beam epitaxy. The irradiation fluences ranged from 5x10{sup 14} to 2x10{sup 16} cm{sup -2}. The irradiation primarily produces donor defects but the subjects of this work are the acceptor-type defects produced in lower concentrations: V{sub In}, in addition to negative-ion-type defects. The heat treatment results in a redistribution of the irradiation-induced point defects. The In vacancies near the film-substrate interface appear restructured after the RTA process, possibly influenced by growth defects near the interface, while deeper in the InN layer, the defects produced in the irradiation are partially removed in the annealing. This could be responsible for the improved transport properties of the annealed films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of indium phosphite and selected compounds under irradiation with swift heavy ions

Surface and bulk properties of indium phosphate single crystals with initial and previously irradiated by 25 MeV electrons structures were irradiated with {sup 86}Kr (253 MeV) and {sup 197}Au (200 MeV) up to various fluences. The modern methods of condensed matter studies were used for research of InP property changes before and after irradiation as scanning (SEM) and high resolution transmission electronic microscopy (HTEM), Rutherford backscattering spectroscopy (RBS/C) and atomic force microscopy (AFM). The comparison of obtained results with the results of other authors is carried out. The surface structure change of InP single crystal irradiated by high-energy 86Kr ions and electrons is studied. It is shown the changes of the InP surface have complicated character and caused by inelastic sputtering processes. It is observed the twice irradiated layer swells with the cracks creation on the surface. The swelling with cracks and strong sputtering of twice irradiated by electrons and ions with high energy layers of the InP and GaAs surfaces are explained using the model based on the influence of ionizing energy loss of swift {sup 86}Kr ions. The small crystalline objects are detected on the InP surface irradiated with {sup 86}Kr ions which may be nano- and micro-crystals of InP. All obtained effects are discussed in frame of models based on ionizing energy loss of swift heavy ions.

36 MATERIALS SCIENCE↗

Sensitivity of CoSi{sub 2} precipitation in silicon to extra-low dopant concentrations. II. First-principles calculations

The paper is the second part of the study on the influence of very low dopant content in silicon on CoSi{sub 2} precipitation during high-temperature cobalt ion implantation into transmission electron microscope samples. It deals with the computational justification of various assumptions used in Paper I when rationalizing the kinetics of cobalt clustering in ion-implanted intrinsic silicon (both undoped and containing low concentrations of phosphorus atoms). In particular, it is proven that divacancies are efficient nucleation centers for the new Co-Si phase. It is shown that the capture of vacancies and divacancies on phosphorus atoms increases their lifetime in silicon matrix, but practically does not affect the mechanism of their interaction with interstitial cobalt atoms. Finally, it is demonstrated that the mobility of phosphorus interstitials at temperatures of our experiment is orders of magnitude higher than might be expected from the published literature data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and optical properties of [In{sub 1−2x}Sn{sub x}Zn{sub x}]GaO{sub 3}(ZnO){sub m}

Compounds of [In{sub 1−2x}Sn{sub x}Zn{sub x}]GaO{sub 3}(ZnO){sub 1} (x≤0.22) and [In{sub 1−2x}Sn{sub x}Zn{sub x}]GaO{sub 3}(ZnO){sub 2} (x≤0.42) were prepared by solid state processing proving a substantial solid solution of Sn in the layered compounds InGaO{sub 3}(ZnO){sub m} (m=1, 2). Single crystal X-ray diffraction of the compounds reveals two In{sup 3+} ions to be substituted by one Sn{sup 4+} and one Zn{sup 2+} at the octahedral layer preserving the average charge of +3 at these sites. The substitution does not lead to an ordering of the ions but proves for the first time that the octahedral site can be occupied by different ions while all characteristics of the layered structures remain unchanged. Consequences of indium substitution are (i) decrease of the a axis compared to InGaO{sub 3}(ZnO){sub m} according to smaller ionic radii of Sn{sup 4+} and Zn{sup 2+} compared to In{sup 3+} and (ii) shift of the optical band gap to higher energies shown by UV–vis measurements. - Graphical abstract: Substitution limits of indium in InGaO{sub 3}(ZnO){sub m} (IGZO) by Sn and Zn are studied for m=1, 2 by single crystal X-ray diffraction and micro-chemical analysis. - Highlights: • New Oxides [In{sub 1−2x}Sn{sub x}Zn{sub x}]GaO{sub 3}(ZnO){sub m} (m=1, 2) with IGZO type structure. • Sn and Zn substitute for In at octahedral sites. • Crystal structures were characterized by single crystal X-ray diffraction. • Optical band gap energies were determined by UV–vis spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanocrystalline CuInSSe thin films by chemical bath deposition technique

Crystalline CuInSSe thin films have been deposited on glass substrate by chemical bath deposition technique. The CuCl{sub 2}, InCl{sub 3}, thiourea and SeO{sub 2} were used as source materials for the Cu{sup 2+}, In{sup 3+}, S{sup 2−} and Se{sup 2−} ions and the Cu/In ratio was kept at 1.0. EDC was used as a complexing agent. The XRD, Scanning Electron Microscope (SEM), Energy Dispersive Analysis of X-Ray (EDAX) and Optical transmission studies were used for structural analysis, surface morphology, elemental analysis and optical band gap, of the grown thin films respectively. The deposition parameters such as pH, deposition temperature and deposition time were optimized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diacetyl and 2,3-pentanedione exposure of human cultured airway epithelial cells: Ion transport effects and metabolism of butter flavoring agents

Inhalation of butter flavoring by workers in the microwave popcorn industry may result in “popcorn workers' lung.” In previous in vivo studies rats exposed for 6 h to vapor from the flavoring agents, diacetyl and 2,3-pentanedione, acquired flavoring concentration-dependent damage of the upper airway epithelium and airway hyporeactivity to inhaled methacholine. Because ion transport is essential for lung fluid balance, we hypothesized that alterations in ion transport may be an early manifestation of butter flavoring-induced toxicity. We developed a system to expose cultured human bronchial/tracheal epithelial cells (NHBEs) to flavoring vapors. NHBEs were exposed for 6 h to diacetyl or 2,3-pentanedione vapors (25 or ≥ 60 ppm) and the effects on short circuit current and transepithelial resistance (R{sub t}) were measured. Immediately after exposure to 25 ppm both flavorings reduced Na{sup +} transport, without affecting Cl{sup −} transport or Na{sup +},K{sup +}-pump activity. R{sub t} was unaffected. Na{sup +} transport recovered 18 h after exposure. Concentrations (100–360 ppm) of diacetyl and 2,3-pentanedione reported earlier to give rise in vivo to epithelial damage, and 60 ppm, caused death of NHBEs 0 h post-exposure. Analysis of the basolateral medium indicated that NHBEs metabolize diacetyl and 2,3-pentanedione to acetoin and 2-hydroxy-3-pentanone, respectively. The results indicate that ion transport is inhibited transiently in airway epithelial cells by lower concentrations of the flavorings than those that result in morphological changes of the cells in vivo or in vitro. - Highlights: • Butter flavoring vapor effects on human cultured airway epithelium were studied. • Na transport was reduced by a 6-h exposure to 25 ppm diacetyl and 2,3-pentanedione. • Na transport recovered 18 h after exposure. • > 60 ppm transepithelial voltage and resistance were abolished; cells were damaged. • Cells metabolized diacetyl and 2,3-pentanedione into acetoin and 2-OH-3-pentanone.

2-3-PENTANEDIONE↗

Wall-loss distribution of charge breeding ions in an electron cyclotron resonance ion source

The ion loss distribution in an electron cyclotron resonance ion source (ECRIS) was investigated to understand the element dependence of the charge breeding efficiency in an electron cyclotron resonance (ECR) charge breeder. The radioactive {sup 111}In{sup 1+} and {sup 140}Xe{sup 1+} ions (typical nonvolatile and volatile elements, respectively) were injected into the ECR charge breeder at the Tokai Radioactive Ion Accelerator Complex to breed their charge states. Their respective residual activities on the sidewall of the cylindrical plasma chamber of the source were measured after charge breeding as functions of the azimuthal angle and longitudinal position and two-dimensional distributions of ions lost during charge breeding in the ECRIS were obtained. These distributions had different azimuthal symmetries. The origins of these different azimuthal symmetries are qualitatively discussed by analyzing the differences and similarities in the observed wall-loss patterns. The implications for improving the charge breeding efficiencies of nonvolatile elements in ECR charge breeders are described. The similarities represent universal ion loss characteristics in an ECR charge breeder, which are different from the loss patterns of electrons on the ECRIS wall.

43 PARTICLE ACCELERATORS↗

Dielectric behavior of Ar{sup +} implanted CR-39 polymer

The frequency dependent dielectric response of Ar{sup +} implanted CR-39 specimens has been studied. Samples were implanted with 130 keV Ar{sup +} ions to various doses ranging from 5x10{sup 14} to 1x10{sup 16} cm{sup -2}. The frequency response of dielectric constant (e) and dielectric loss has been studied both in the pristine and argon ion implanted samples of CR-39 polymer in the frequency range 10{sup 4} to 10{sup 8} Hz. Structural changes produced in CR-39 specimens due to implantation have been studied using Attenuated total reflectance (ATR) Fourier transform infrared spectroscopic technique. Results of dielectric analysis indicate the lowering in dielectric constant ({epsilon}') and similar behavior of dielectric loss with increase in ion fluence. An attempt has been made to correlate these changes produced in the dielectric properties of implanted specimens with the structural changes produced due to implantation.

36 MATERIALS SCIENCE↗

Precision Calculation of Blackbody Radiation Shifts for Optical Frequency Metrology

We show that three group IIIB divalent ions, B{sup +}, Al{sup +}, and In{sup +}, have anomalously small blackbody radiation (BBR) shifts of the ns{sup 2} {sup 1}S{sub 0}-nsnp {sup 3}P{sub 0}{sup o} clock transitions. The fractional BBR shifts for these ions are at least 10 times smaller than those of any other present or proposed optical frequency standards at the same temperature, and are less than 0.3% of the Sr clock shift. We have developed a hybrid configuration-interaction + coupled-cluster method that provides accurate treatment of correlation corrections in such ions and yields a rigorous upper bound on the uncertainty of the final results. We reduce the BBR contribution to the fractional frequency uncertainty of the Al{sup +} clock to 4x10{sup -19} at T=300 K. We also reduce the uncertainties due to this effect at room temperature to 10{sup -18} level for B{sup +} and In{sup +} to facilitate further development of these systems for metrology and quantum sensing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion-implanted high microwave power indium phosphide transistors

Encapsulated rapid thermal annealing (RTA) has been used in the fabrication of InP power MISFETs with ion-implanted source, drain, and active-channel regions. The MISFETs had a gate length of 1.4 microns. Six to ten gate fingers per device, with individual gate finger widths of 100 or 125 microns, were used to make MISFETs with total gate widths of 0.75, 0.8, or 1 mm. The source and drain contact regions and the channel region of the MISFETs were fabricated using Si implants in InP at energies from 60 to 360 keV with doses of (1-560) x 10 to the 12th/sq cm. The implants were activated using RTA at 700 C for 30 sec in N2 or H2 ambients using an Si3N4 encapsulant. The high-power high-efficiency MISFETs were characterized at 9.7 GHz, and the output microwave power density for the RTA conditions used was as high as 2.4 W/mm. For a 1-W input at 9.7 GHz gains up to 3.7 dB were observed, with an associated power-added efficiency of 29 percent and output power density 70 percent greater than that of GaAs MESFETs.

Biedenbender, Michael D.↗

Highly efficient and selective adsorption of In{sup 3+} on pristine Zn/Al layered double hydroxide (Zn/Al-LDH) from aqueous solutions

A pristine Zn/Al-layered double hydroxide (Zn/Al-LDH) showed excellent adsorption ability and selectivity towards In{sup 3+} ions from aqueous solutions. The adsorption behaviour as a function of the contact time, solution pH, ionic strength, and amount of adsorbent under ambient conditions revealed a strong dependency on the pH and ionic strength over In{sup 3+} intake. The structure and properties of Zn/Al-LDH and In{sup 3+} adsorbed Zn/Al-LDH (In–Zn/Al-LDH) were examined carefully by X-ray diffraction, Fourier transform infrared spectroscopy, N{sub 2}-sorption/desorption, UV–vis spectroscopy, and X-ray photoelectron spectroscopy. The adsorbent had a sufficient number of active sites that were responsible for the In{sup 3+} adsorption and quite stable even after the adsorption process. The selective adsorption of In{sup 3+} on Zn/Al-LDH was also observed even from a mixture containing competing ions, such as Mn{sup 2+}, Co{sup 2+}, Ni{sup 2+}, Cd{sup 2+}, Pb{sup 2+}, and Cu{sup 2+}. The adsorption experiments showed that Zn/Al-LDH is a promising material for the pre-concentration and selective removal of In{sup 3+} from large volumes of aqueous solutions. - Highlights: • A pristine Zn/Al-layered double hydroxide showed good selectivity for In{sup 3+} ions. • The material exhibited a maximum In{sup 3+} intake of 205 mg g{sup −1} at pH 6. • The materials showed good affinity of In{sup 3+} over Cu{sup 2+} and Pb{sup 2+} from ion mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗