Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

2-3 {mu}m mid infrared light sources using InGaAs/GaAsSb ''W'' type quantum wells on InP substrates

We have investigated the InGaAs/GaAsSb/InAlGaAs/InAlAs type-II ''W'' quantum wells (QWs) grown on InP substrates by molecular beam epitaxy. The photoluminescence (PL) emission wavelength longer than 2.56 {mu}m at room temperature (RT) is demonstrated for the first time in this material system. The PL emission peaks of our designed samples can cover a wide range from 2 to 2.5 {mu}m at cryogenic temperature. The samples show good optical quality that the reduction in integrated PL intensity is only around one order of magnitude from 35 K to RT. We found that the integrated PL intensity decreased as the emission wavelength increased, which is due to the reduction in the electron-hole wave function overlap. This is consistent with the calculated result. In the power dependent PL measurements, the emission peak of ''W'' type QWs show blue shifts with the excitation power (P{sub ex}) but does not follow the P{sub ex}{sup 1/3} rule as predicted by type-II band bending model. The localized states filling effect gives reasonable explanations for the observed phenomena.

36 MATERIALS SCIENCE↗

Impact of SF{sub 6} plasma treatment on performance of TaN-HfO{sub 2}-InP metal-oxide-semiconductor field-effect transistor

In this work, the experimental impact of SF{sub 6} plasma treatment on the performance of InP metal-oxide-semiconductor field-effect transistors is presented. S and F are incorporated into atomic layer deposited HfO{sub 2} via postgate SF{sub 6} plasma treatment. The decreased subthreshold swing, gate leakage (I{sub g}), and increased effective channel mobility ({mu}{sub eff}) indicate that better interface and bulk oxide quality have been achieved with SF{sub 6} plasma treatment due to the formation of stronger Hf-F bonds. Drive current (I{sub d}), transconductance (G{sub m}), and effective channel mobility ({mu}{sub eff}) are improved by 22.3%, 35%, and 35%, respectively, compared with those of control devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

InN/InGaN multiple quantum wells emitting at 1.5 {mu}m grown by molecular beam epitaxy

This work reports on the growth by molecular beam epitaxy and characterization of InN/InGaN multiple quantum wells (MQWs) emitting at 1.5 {mu}m. X-ray diffraction (XRD) spectra show satellite peaks up to the second order. Estimated values of well (3 nm) and barrier (9 nm) thicknesses were derived from transmission electron microscopy and the fit between experimental data and simulated XRD spectra. Transmission electron microscopy and XRD simulations also confirmed that the InGaN barriers are relaxed with respect to the GaN template, while the InN MQWs grew under biaxial compression on the InGaN barriers. Low temperature (14 K) photoluminescence measurements reveal an emission from the InN MQWs at 1.5 {mu}m. Measurements as a function of temperature indicate the existence of localized states, probably due to InN quantum wells' thickness fluctuations as observed by transmission electron microscopy.

36 MATERIALS SCIENCE↗

Predicted band structures of III-V semiconductors in the wurtzite phase

While non-nitride III-V semiconductors typically have a zinc-blende structure, they may also form wurtzite crystals under pressure or when grown as nanowhiskers. This makes electronic structure calculation difficult since the band structures of wurtzite III-V semiconductors are poorly characterized. We have calculated the electronic band structure for nine III-V semiconductors in the wurtzite phase using transferable empirical pseudopotentials including spin-orbit coupling. We find that all the materials have direct gaps. Our results differ significantly from earlier ab initio calculations, and where experimental results are available (InP, InAs, and GaAs) our calculated band gaps are in good agreement. We tabulate energies, effective masses, and linear and cubic Dresselhaus zero-field spin-splitting coefficients for the zone-center states. The large zero-field spin-splitting coefficients we find may facilitate the development of spin-based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Si volume- and delta-doped InGaAs grown by molecular beam epitaxy

Bulk InGaAs layers were grown at 400 deg. C lattice-matched to InP semi-insulating substrates by molecular beam epitaxy. Si doping of the layers was performed by applying volume- and delta-doping techniques. The samples were characterized by capacitance-voltage, van der Pauw-Hall, secondary ion mass spectroscopy and photoluminescence measurements. Good agreement in terms of dependence of mobility and Burstein-Moss shift shift on doping concentration in samples doped by the two different techniques was obtained. Amphoteric behavior of Si was observed at doping concentrations higher than {approx}2.9x10{sup 19} cm{sup -3} in both delta- and volume-doped samples. Degradation of InGaAs crystalline quality occurred in samples with Si concentrations higher than {approx}4x10{sup 19} cm{sup -3}.

36 MATERIALS SCIENCE↗

Mechanisms of nanodot formation under focused ion beam irradiation in compound semiconductors

We have examined the responses of GaAs, InP, InAs, and AlAs to 30 keV focused ion beam (FIB) irradiation and applied a unified model that consistently explains the observed effects. Nanodots were observed to form on GaAs, InP, and InAs under irradiation at normal incidence, while nanodots are not observed on AlAs. The FIB response and nanodot formation behavior of each material is discussed with regard to a few basic material properties and a model for nanodot creation and growth by the action of preferential sputtering and Ostwald ripening. The model predicts the development of a stable average nanodot size with increasing ion dose, with the average nanodot size depending on the excess group III adatom yield, adatom surface diffusion rate, and surface tension. These predictions qualitatively agree with the experimentally observed trends for GaAs and InP. They also agree for the initial nanodot formation on InAs, but this material system exhibits a sudden transition in the nanodot size distribution. The model predicts that nanodots will have difficulty forming and growing on AlAs, which is also in agreement with our experimental results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A thermodynamic analysis of native point defect and dopant solubilities in zinc-blende III-V semiconductors

A thermodynamic model is used to analyze available experimental data relevant to point defects in the binary zinc-blende III-V compounds (Ga,In)-(P,As,Sb). The important point defects and their complexes in each of the materials are identified and included in the model. Essentially all of the available experimental data on dopant solubility, crystal density, and lattice parameter of melt and solution grown crystals and epilayers are reproduced by the model. It extends an earlier study [Hurle, J. Appl. Phys. 85, 6957 (1999)] devoted solely to GaAs. Values for the enthalpy and entropy of formation of both native and dopant related point defects are obtained by fitting to experimental data. In undoped material, vacancies, and interstitials on the Group V sublattice dominate in the vicinity of the melting point (MP) in both the phosphides and arsenides, whereas, in the antimonides, vacancies on both sublattices dominate. The calculated concentrations of the native point defects are used to construct the solidus curves of all the compounds. The charged native point defect concentrations at the MP in four of the six materials are significantly higher than their intrinsic carrier concentrations. Thus the usually assumed high temperature 'intrinsic' electroneutrality condition for undoped material (n=p) is not valid for these materials. In GaSb, the Ga{sub Sb} antisite defect appears to be grown-in from the melt. This contrasts with the As{sub Ga} defect in GaAs for which the concentration grown-in at the MP is negligibly small. Compensation of donor-doped material by donor-Group III vacancy complexes is shown to exist in all the compounds except InP where Group VI doped crystals are uncompensated and in InSb where there is a lack of experimental data. The annealing effects in n{sup +} GaAs, including lattice superdilation, which were shown in the earlier paper to be due to Group III vacancy undersaturation during cooling, are found to be present also in GaSb and InAs. Results for native point defects are compared with reported ''first principles'' calculations for GaAs. It is seen that, while there is some accord with experimental findings for low temperature molecular beam epitaxial (MBE) growth, they fail totally to predict the behavior under high temperature growth conditions. The analysis of data on liquid phase epitaxy (LPE) growth of GaAs from Bi solution in the earlier paper has been re-calculated in the light of experimental data that showed that the model used in that paper to represent the Ga-As-Bi phase equilibria was inadequate. An improved model reveals that Ga vacancies exert a greater effect in controlling the extent of the linear range of donor dopant solubility than previously predicted. It has also led to a re-evaluation of the equilibrium EL2 and Ga vacancy concentrations in GaAs during MBE growth under As-rich conditions at low temperatures ({approx}500 K). The amended model predicts that the very high concentrations of EL2 and of Ga vacancies observed experimentally are near equilibrium values. The predicted increase in the equilibrium concentrations of these defects at low temperatures results from coulombic attraction between the two defects. At temperatures somewhat lower than 500 K the rate of increase becomes catastrophic.

36 MATERIALS SCIENCE↗

Enhanced room temperature electronic and thermoelectric properties of the dilute bismuthide InGaBiAs

We report room temperature electronic and thermoelectric properties of Si-doped In{sub 0.52}Ga{sub 0.48}Bi{sub y}As{sub 1-y} with varying Bi concentrations. These films were grown epitaxially on a semi-insulating InP substrate by molecular beam epitaxy. We show that low Bi concentrations are optimal in improving the conductivity, Seebeck coefficient, and thermoelectric power factor, possibly due to the surfactant effects of bismuth. We observed a reduction in thermal conductivity with increasing Bi concentration, which is expected because of alloy scattering. We report a peak ZT of 0.23 at 300 K.

36 MATERIALS SCIENCE↗

SiN{sub x}-induced intermixing in AlInGaAs/InP quantum well through interdiffusion of group III atoms

We analyze the composition profiles within intermixed and non-intermixed AlInGaAs-based multiple quantum wells structures by secondary ion mass spectrometry and observe that the band gap blue shift is mainly attributed to the interdiffusion of In and Ga atoms between the quantum wells and the barriers. Based on these results, several AlInGaAs-based single quantum well (SQW) structures with various compressive strain (CS) levels were grown and their photoluminescence spectra were investigated after the intermixing process involving the encapsulation of thin SiN{sub x} dielectric films on the surface followed by rapid thermal annealing. In addition to the annealing temperature, we report that the band gap shift can be also enhanced by increasing the CS level in the SQW. For instance, at an annealing temperature of 850 Degree-Sign C, the photoluminescence blue shift is found to reach more than 110 nm for the sample with 1.2%-CS SQW, but only 35 nm with 0.4%-CS SQW. We expect that this relatively larger atomic compositional gradient of In (and Ga) between the compressively strained quantum well and the barrier can facilitate the atomic interdiffusion and it thus leads to the larger band gap shift.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Single photon emission at 1.55 μm from charged and neutral exciton confined in a single quantum dash

We investigate charged and neutral exciton complexes confined in a single self-assembled InAs/InGaAlAs/InP quantum dash emitting at 1.55 μm. The emission characteristics have been probed by measuring high-spatial-resolution polarization-resolved photoluminescence and cross-correlations of photon emission statistics at T = 5 K. The photon auto-correlation histogram of the emission from both the neutral and charged exciton indicates a clear antibunching dip with as-measured g{sup (2)}(0) values of 0.18 and 0.31, respectively. It proves that these exciton complexes confined in single quantum dashes of InP-based material system can act as true single photon emitters being compatible with standard long-distance fiber communication technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Study of the Growth of Single Crystals

Research on the growth of single crystals of the III-V compound indium antimonide was pursued in order to gain a firsthand knowledge of some factors which govern the growth of single crystals of this compound. These studies were conducted using a standard Czochralski crystal pulling furnace. This type of furnace allows crystals to be formed without being constrained to a crucible. Several factors were found to have a large detrimental effect on the growth of single crystals of indium antimonide, the most important of which seems to be the degree to which the environment surrounding the crystal during growth can be controlled. Ways to overcome these effects were determined and are outlined.

Desmet, D. J.↗

Probing the local structure of crystalline ZITO: In[subscript 2-2x]Sn[subscript x]Zn[subscript x]O[subscript 3] (x=<0.4)

The local structure of In{sub 2}O{sub 3} cosubstituted with Zn and Sn (In{sub 2-2x}Sn{sub x}Zn{sub x}O{sub 3}, x {le} 0.4 or ZITO) was determined by extended X-ray absorption fine structure (EXAFS) for x = 0.1, 0.2, 0.3 and 0.4. The host bixbyite In{sub 2}O{sub 3} structure is maintained up to the enhanced substitution limit (x = 0.4). The EXAFS spectra are consistent with random substitution of In by the smaller Zn and Sn cations, a result that is consistent with the 'good-to-excellent' conductivities reported for ZITO.

36 MATERIALS SCIENCE↗

Compositionally controlled metal-insulator transition in Tl{sub 2-x}In{sub x}TeO{sub 6}

Tl{sub 2}TeO{sub 6} and In{sub 2}TeO{sub 6} are both known to crystallize in the Na{sub 2}SiF{sub 6}-type structure. We find Tl{sub 2}TeO{sub 6} is metallic, whereas In{sub 2}TeO{sub 6} is an insulator. We have prepared a complete Tl{sub 2-x}In{sub x}TeO{sub 6} series in a search for a compositionally controlled metal-insulator transition that might be expected if a complete solid solution can be obtained. Unit cell edges and volume vary monotonically with no indication of a miscibility gap. The metal-insulator transition occurs at an x value of about 1.4, which can be rationalized on a percolation model. No superconductivity could be detected down to 5 K. -- Graphical abstract: A complete solid solution between Tl{sub 2}TeO{sub 6} and In{sub 2}TeO{sub 6} is formed. A compositionally controlled metal-insulator transition occurs in Tl{sub 2-x}In{sub x}TeO{sub 6} at an x value of about 1.5. No superconductivity could be detected down to 5 K. Display Omitted Research highlights: {yields} A complete solid solution between Tl{sub 2}TeO{sub 6} and In{sub 2}TeO{sub 6} is formed. {yields} A compositionally controlled metal-insulator transition occurs in Tl{sub 2-x}In{sub x}TeO{sub 6} at an x value of about 1.5, which can be rationalized on a percolation model. {yields} No superconductivity could be detected down to 5 K.

36 MATERIALS SCIENCE↗

Conduction noise absorption by ITO thin films attached to microstrip line utilizing Ohmic loss

For the aim of wide-band noise absorbers with a special design for low frequency performance, this study proposes conductive indium-tin oxide (ITO) thin films as the absorbent materials in microstrip line. ITO thin films were deposited on the polyimide film substrates by rf magnetron cosputtering of In{sub 2}O{sub 3} and Sn targets. The deposited ITO films show a typical value of electrical resistivity ({approx}10{sup -4} {Omega} m) and sheet resistance can be controlled in the range of 20-230 {Omega} by variation in film thickness. Microstrip line with characteristic impedance of 50 {Omega} was used for determining their noise absorbing properties. It is found that there is an optimum sheet resistance of ITO films for the maximum power absorption. Reflection parameter (S{sub 11}) is increased with decrease in sheet resistance due to impedance mismatch. On the while, transmission parameter (S{sub 21}) is decreased with decrease in sheet resistance due to larger Ohmic loss of the ITO films. Experimental results and computational prediction show that the optimum sheet resistance is about 100 {Omega}. For this film, greater power absorption is predicted in the lower frequency region than ferrite thin films of high magnetic loss, which indicates that Ohmic loss is the predominant loss parameter for power absorption in the low frequency range.

36 MATERIALS SCIENCE↗

Charge carrier transport in indium oxide nanocrystals

Nanocrystalline indium oxide samples with various sizes of nanocrystals are synthesized by the sol-gel method. The minimal and maximal average sizes of nanocrystals are 7-8 and 18-20 nm, respectively. An analysis of conductivity measured at dc and ac signals in a wide temperature range (T = 50-300 K) shows that the transport of charge carriers at high temperatures takes place over the conduction band, while in the low-temperature range, the hopping mechanism with a varying jump length over localized states is observed.

36 MATERIALS SCIENCE↗

Resonant raman scattering and dispersion of polar optical and acoustic phonons in hexagonal inn

It is shown that a study of the dependence of impurity-related resonant first-order Raman scattering on the frequency of excitation light makes it possible to observe the dispersion of polar optical and acoustic branches of vibrational spectrum in hexagonal InN within a wide range of wave vectors. It is established that the wave vectors of excited phonons are uniquely related to the energy of excitation photon. Frequencies of longitudinal optical phonons E{sub 1}(LO) and A{sub 1}(LO) in hexagonal InN were measured in the range of excitation-photon energies from 2.81 to 1.17 eV and the frequencies of longitudinal acoustic phonons were measured in the range 2.81-1.83 eV of excitation-photon energies. The obtained dependences made it possible to extrapolate the dispersion of phonons A{sub 1}(LO) and E{sub 1}(LO) to as far as the point {Gamma} in the Brillouin zone and estimate the center-band energies of these phonons (these energies have not been uniquely determined so far).

36 MATERIALS SCIENCE↗

New indium selenite-oxalate and indium oxalate with two- and three-dimensional structures

Two new indium(III) compounds with extended structures, [In{sub 2}(SeO{sub 3}){sub 2}(C{sub 2}O{sub 4})(H{sub 2}O){sub 2}].2H{sub 2}O (I) and [NH{sub 3}(CH{sub 2}){sub 2}NH{sub 3}][In(C{sub 2}O{sub 4}){sub 2}]{sub 2}.5H{sub 2}O (II), have been prepared under mild hydrothermal conditions and structurally characterized by single-crystal X-ray diffraction, thermogravimetric analysis and infrared spectroscopy. Compound I crystallizes in the triclinic system, space group P-1, with a=5.2596(11) A, b=6.8649(14) A, c=9.3289(19) A, {alpha}=101.78(3){sup o}, {beta}=102.03(3){sup o}, {gamma}=104.52(3){sup o}, while compound II crystallizes in the orthorhombic system, space group Fdd2, with a=15.856(3) A, b=31.183(6) A, c=8.6688(17) A. In compound I, indium-selenite chains are bridged by oxalate units to form two-dimensional (2D) In{sub 2}(SeO{sub 3}){sub 2}C{sub 2}O{sub 4} layers, separated by non-coordinating water molecules. In compound II, the indium atoms are connected through the oxalate units to generate a 3D open framework containing cross-linked 12- and 8-membered channels. - Graphical abstract: Two new indium(III) compounds have been hydrothermally synthesized and structurally characterized. In I, the indium-selenite chains are bridged by oxalate units to form 2D In{sub 2}(SeO{sub 3}){sub 2}C{sub 2}O{sub 4} layers. In II, the indium atoms are connected through the oxalate units to generate a 3D open framework containing cross-linked 12- and 8-membered ring channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗