Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IGNEOUS ROCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Major and trace elements in igneous rocks from Apollo 15.

The concentrations of major and trace elements have been determined in igneous rocks from Apollo 15. All materials analyzed have typical depletions of Eu except for minerals separated from sample 15085. Four samples have concentrations of trace elements that are similar to those of KREEP. The samples of mare basalt from Apollo 15 have higher concentrations of FeO, MgO, Mn, and Cr and lower concentrations of CaO, Na2O, K2O, and rare-earth elements (REE) as compared to the samples of mare basalt from Apollos 11, 12, and 14. The samples can be divided into two groups on the basis of their normative compositions. One group is quartz normative and has low concentrations of FeO while the other is olivine normative and has high concentrations of FeO. The trace element data indicate that the samples of olivine normative basalt could be from different portions of a single lava flow.

Helmke, P. A.↗

Uranium in NIMROC standard igneous rock samples

Results are reported for analysis of the uranium in multiple samples of each of six igneous-rock standards (dunite, granite, lujavrite, norite, pyroxenite, and syenite) prepared as geochemical reference standards for elemental and isotopic compositions. Powdered rock samples were examined by measuring delayed neutron emission after irradiation with a flux of the order of 10 to the 13th power neutrons/sq cm per sec in a nuclear reactor. The measurements are shown to compare quite favorably with previous uranium determinations for other standard rock samples.

Rowe, M. W.↗

Lead isotope systematics of some igneous rocks from the Egyptian Shield

Lead isotope data on whole-rock samples and two feldspar separates for a variety of Pan-African (late Precambrian) igneous rocks for the Egyptian Shield are presented. It is pointed out that the eastern desert of Egypt is a Late Precambrian shield characterized by the widespread occurrence of granitic plutons. The lead isotope ratios may be used to delineate boundaries between Late Precambrian oceanic and continental environments in northeastern Africa. The samples belong to three groups. These groups are related to a younger plutonic sequence of granites and adamellites, a plutonic group consisting of older tonalites to granodiorites, and the Dokhan volcanic suite.

Gillespie, J. G.↗

U-Pb zircon geochronology and evolution of some Adirondack meta-igneous rocks

An update was presented of the recent U-Pb isotope geochronology and models for evolution of some of the meta-igneous rocks of the Adirondacks, New York. Uranium-lead zircon data from charnockites and mangerites and on baddeleyite from anorthosite suggest that the emplacement of these rocks into a stable crust took place in the range 1160 to 1130 Ma. Granulite facies metamorphism was approximately 1050 Ma as indicated by metamorphic zircon and sphene ages of the anorthosite and by development of magmatitic alaskitic gneiss. The concentric isotherms that are observed in this area are due to later doming. However, an older contact metamorphic aureole associated with anorthosite intrusion is observed where wollastonite develops in metacarbonates. Zenoliths found in the anorthosite indicate a metamorphic event prior to anorthosite emplacement. The most probable mechanism for anorthosite genesis is thought to be ponding of gabbroic magmas at the Moho. The emplacement of the anorogenic anorthosite-mangerite-charnockite suite was apparently bracketed by compressional orogenies.

Mclelland, J. M.↗

Rb-Sr ages of igneous rocks from the Apollo 14 mission and the age of the Fra Mauro formation.

Internal Rb-Sr isochrons were determined on four basaltic rocks and on a basaltic clast from a breccia from the Fra Mauro landing site. An internal isochron was determined for rock 12004 and yielded a value in agreement with previous results for basaltic rocks from the Apollo 12 site. The crystallization ages for Apollo 14 basalts are only 0.2 to 0.3 AE older than were found for mare basalts from the Sea of Tranquility. Assuming these leucocratic igneous rocks to be representative of the Fra Mauro site, it follows that there were major igneous processes active in these regions, and presumably throughout the highlands, at times only slightly preceding the periods at which the maria were last flooded.

Papanastassiou, D. A.↗

On the weathering of Martian igneous rocks

Besides the young crystallization age, one of the first arguments for the martian origin of shergottite, nakhlite, and chassignite (SNC) meteorites came from the chemical similarity of the meteorite Shergotty and the martian soil as measured by Viking XRF analyses. In the meantime, the discovery of trapped rare gas and nitrogen components with element and isotope ratios closely matching the highly characteristic ratios of the Mars atmosphere in the shock glasses of shergottite EETA79001 was further striking evidence that the SNC's are martian surface rocks. The martian soil composition as derived from the Viking mission, with its extremely high S and Cl concentrations, was interpreted as weathering products of mafic igneous rocks. The low SiO2 content and the low abundance of K and other trace elements in the martian soils point to a mafic crust with a considerably smaller degree of fractionation compared to the terrestrial crust. However, the chemical evolution of the martian regolith and soil in respect to surface reaction with the planetary atmosphere or hydrosphere is poorly understood. A critical point in this respect is that the geochemical evidence as derived from the SNC meteorites suggests that Mars is a very dry planet that should have lost almost all its initially large water inventory during its accretion.

Dreibus, G.↗

Spectral characterization of igneous rocks in the 8- to 12-micron region

This paper investigates the crystal-chemistry basis for the variation in spectral behavior of ingneous rocks, with the purpose of developing relationships useful for applications in the lithologic characterization of terrestrial and extraterrestrial surfaces. A new parameter is proposed for characterizing general rock and mineral type. The parameter, SCFM, defined as the ratio SiO2/(SiO2 + CaO + FeO + MgO), reflects the degree of depolymerization of the silica tetrahedra in both fine-grained and coarse-grained igneous rocks, and is a good descriptor of the composition of these rocks. Using spectra obtained in the laboratory on coarse-particulate mineral and solid-rock samples, the SCFM parameter was used to assess the effects of variations in the rock composition on the location, number, and width of spectral bands. A regression analysis of bands varying in width from 0.2 micron to 1.4 microns versus the SCFM value resulted in correlation coefficients ranging from 0.88 to 0.97.

Walter, Louis S.↗

Charge Generation and Propagation in Igneous Rocks

Resistivity changes, ground potentials, electromagnetic (EM) and luminous signals prior to or during earthquakes have been reported, in addition to ground uplift and tilt, and to changes in the seismic wave propagation parameters. However, no physical model exists that ties these diverse phenomena together. Through time-resolved impacts experiments it has been observed that, when igneous rocks (gabbro, diorite, granite) are impacted at low velocities (approx. 100 m/sec), highly mobile electronic charge carriers are generated, spreading from a small volume near the impact point, causing electric potentials, EM and light emission. The rock becomes momentarily conductive. When impacted at higher velocities (approx. 1.5 km/sec), the propagation of the P and S waves is registered through the transient piezoelectric response of quartz. At the same time, the rock volume is filled with mobile charge carriers, and a positive surface potential is registered. During the next 1-2 msec the surface potential oscillates, due to electron injection from ground. These observations are consistent with positive holes, e.g. defect electrons in the O(2-) sublattice, that can travel via the O 2p-dominated valence band of the silicate minerals at the speed of a phonon-mediated charge transfer. Before activation, the positive hole charge carriers lay dormant in form of positive hole pairs, PHP, electrically inactive, chemically equivalent to peroxy links in the structures of constituent minerals. PHPs are introduced by way of hydroxyl (O3Si-OH) incorporated into nominally anhydrous minerals when they crystallize in water-laden environments. Given that sound waves of even relatively low intensity appear to cause PHPs dissociation, thus generating mobile positive holes, it is proposed that microfracturing during rock deformation cause PHP dissociation. Depending on where and how much the rock volume is stressed, the positive holes are expected to form fluctuating charge clouds in the earthquake source region that may account for earthquake-related electrical phenomena and the reported low frequency EM signals.

Freund, Friedemann↗

Screening analysis of enhanced weathering of igneous rocks and industrial waste materials

Enhanced weathering (EW) is a promising emerging carbon dioxide removal approach that involves harnessing and accelerating the natural weathering process by which atmospheric CO2 passively reacts with exposed alkaline minerals and is removed from the atmosphere. This manuscript reports on a screening level techno-economic analysis of EW. Two primary cases utilizing different sources of alkaline material are considered: (1) utilizing naturally occurring mined igneous rocks, and (2) utilizing industrial waste materials. The modeled EW process encompasses material purchase, comminution, transport, distribution of material on farmland, and measurement, reporting and verification of CO2 removal. Detailed sensitivities are performed to highlight promising scenarios for application. The analysis highlights that utilizing materials with high weathering potential in suitable locations may result in relatively low levelized cost of captured (less than $100 per total tonnes of CO2 captured from the atmosphere). NETL is publishing a detailed and transparent report titled “Enhanced Weathering: Techno-Economic and Life Cycle Screening Analysis” that includes more detail on the screening level techno-economic analysis and includes a life cycle analysis.

Leptinsky, Sarah [NETL Site Support Contractor, Na↗

Classification Scheme for Diverse Sedimentary and Igneous Rocks Encountered by MSL in Gale Crater

The Curiosity Rover landed in a lithologically and geochemically diverse region of Mars. We present a recommended rock classification framework based on terrestrial schemes, and adapted for the imaging and analytical capabilities of MSL as well as for rock types distinctive to Mars (e.g., high Fe sediments). After interpreting rock origin from textures, i.e., sedimentary (clastic, bedded), igneous (porphyritic, glassy), or unknown, the overall classification procedure (Fig 1) involves: (1) the characterization of rock type according to grain size and texture; (2) the assignment of geochemical modifiers according to Figs 3 and 4; and if applicable, in depth study of (3) mineralogy and (4) geologic/stratigraphic context. Sedimentary rock types are assigned by measuring grains in the best available resolution image (Table 1) and classifying according to the coarsest resolvable grains as conglomerate/breccia, (coarse, medium, or fine) sandstone, silt-stone, or mudstone. If grains are not resolvable in MAHLI images, grains in the rock are assumed to be silt sized or smaller than surface dust particles. Rocks with low color contrast contrast between grains (e.g., Dismal Lakes, sol 304) are classified according to minimum size of apparent grains from surface roughness or shadows outlining apparent grains. Igneous rocks are described as intrusive or extrusive depending on crystal size and fabric. Igneous textures may be described as granular, porphyritic, phaneritic, aphyric, or glassy depending on crystal size. Further descriptors may include terms such as vesicular or cumulate textures.

Schmidt, M. E.↗

Rb-Sr age of lunar igneous rocks 62295 and 14310

Measurements of Rb-Sr ages of crystallization performed on igneous lunar highland rocks 62295 and 14310 are reported. Lunar sample 62295 is a mesostasis-rich spinel-troctolite very-high-alumina basalt exhibiting a variable igneous structure. Sample 14310 is a feldspathic KREEP-rich basalt. The determined ages probably date the cooling of shock melts.

Mark, R. K.↗

Primary igneous rocks on Mars: Composition and distribution

The present knowledge of the crustal composition of Mars is synthesized and implications discussed for in-situ resource utilization. Sources of information include remote sensing observations, Viking XRF chemical measurements, and characteristics of the SNC meteorites (which most researchers now believe originated on Mars). There are a number of lines of evidence that abundant ferrous-iron rich igneous crustal rocks (and derivative soils) are available at or very near the current Martian surface at many locations on the planet. Most of these exposures show spectroscopic evidence for abundant pyroxene, consistent with basaltic compositions. The SNC meteorites, which have basaltic compositions, were also studied extensively. Interpretations of Mars crustal chemistry and mineralogy (petrology) based on these various sources are reviewed, and their consistencies and differences are discussed.

Singer, Robert B.↗