Evaluation of LANDSAT-2 data for selected hydrologic applications
There are no author-identified significant results in this report.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
There are no author-identified significant results in this report.
There are no author-identified significant results in this report.
There are no author-identified significant results in this report.
The author has identified the following significant results. Estimates of soil moisture were obtained from visible, near-IR gamma ray and microwave data. Attempts using GOES thermal-IR were unsuccessful due to resolutions (8 km). Microwaves were the most effective at soil moisture estimates, with and without vegetative cover. Gamma rays provided only one value for the test site, produced by many data points obtained from overlapping 150 meter diameter circles. Even though the resulting averaged value was near the averaged field moisture value, this method suffers from atmospheric contaminants, the need to fly at low altitudes, and the necessity of prior calibration of a given site. Visible and near-IR relationships are present for bare fields but appear to be limited to soil moisture levels between 5 and 20%. The densely vegetated alfalfa fields correlated with near-IR reflectance only; soil moisture values from wheat fields showed no relation to either or near-IR MSS data.
A microwave remote sensing of snowpack experiment is described and some preliminary data presented. A mobile field laboratory consisting of a four-frequency (5, 10.7, 18 and 37 GHz), all with dual linear (vertical and horizontal) polarizations, microwave radiometer system attached to a truck-mounted aerial lift was used to study the microwave emission characteristics of snowpacks in the Colorado Rocky Mountains during the winter of 1977-78. The influence of snowpack physical parameters such as water equivalent, grain size, and melt-freeze cycle on its microwave brightness temperature and its implications to the application of microwave radiometric technique to remote sensing of snowpack for runoff prediction are discussed.
The synergistic relationships among LANDSAT imagery, Skylab photographs, and aerial photographs were useful for establishing areas of near surface bedrock. Lineaments were located on LANDSAT imagery and aerial photographs during 1978 and near surface water tables were to be located during 1980. Both of these subjects can be identified by remote sensing methods more reliably than individual outcrops, which are small and occur in a wide variety of environments with a wide range of responses. Bedrock outcrops themselves could not be resolved by any of the data sources used, nor did any combination of data sources specifically identify rock at the ground surface. The data sources could not simply be combined mathematically to produce a visual image of probable areas of near surface bedrock. Outcrops and near surface bedrock had to be verified visually at the site. Despite these drawbacks, a procedure for locating areas of near surface bedrock within which actual surface outcrops may occur was developed.
Skylab photographs, side-looking radar imagery, published soil maps, topographic maps, conventional aerial photography as well as LANDSAT imagery under wet and dry changes for several years were analyzed over selected areas in Minnesota to test their usefulness in detecting near-surface ground water. Results show that optical density read from LANDSAT data is not a reliable discriminator of depth to shallow ground water when one band of one scene is used alone, and is little improved when several bands of several scenes are used synergistically. The method is enhanced if information from soil maps is included in the analysis, especially for discriminating boggy ground from better drained areas. It appears, however, that in areas where soil maps and good topographic maps already exist, the depth to ground water can be predicted from those media as well as (if not better than) it can be predicted from remote imagery. The LANDSAT method used demonstrated no capability for recognizing deeper categories of ground water.
Land cover information for the Clinton River Basin (Michigan) derived from LANDSAT multispectral scanner (MSS) data was compared with that from airborne thematic mapper simulator (TMS) to investigate the probable capabilities of the thematic mapper (TM) launched aboard LANDSAT-4 in July 1982. The preliminary findings for one 7.5 minute topographic map, Mt. Clemens West, are reported. Significant improvements in land cover classification accuracy were obtained using TMS data as compared with MSS data. Overall mapping accuracy increased from 49 to 61 percent with an improvement from 71 to 84 percent in the residential category. A combination of four bands with one band in each major region of the spectrum (visible, near IR, middle IR and thermal IR) provided as good a discrimination of land cover as all seven TM bands. Based on the improved land cover classification accuracy of TM, TM data has the potential to provide more useful and effective input to US Army Corps of Engineers flood forecasting and flood damage prediction/assessment models.
Thematic mapper simulator (TMS) data produced a more accurate and spatially contiguous classification than MSS for the Clinton River Basin in Michigan. While the accuracy of the 4-band TMS data set was as good as the 7-band, the 3-band TMS data sets were also better than the MSS. The combination of bands selected based on the transformed divergence technique provided one band in each of the major regions of the spectrum: visible (band 3), near IR (band 4), middle IR (band 5) and thermal IR (band 7). These results should be viewed with some caution, since the data are from a TMS rather than the actual TM and the MSS data were obtained in early summer while the TMS was flown in late summer. The higher accuracies for the developed categories (residential and commercial) should improve the predictions of runoff in flood forecasting models and of flood damage for damage calculation models appreciably.
The objectives of the study are: (1) Analysis of SIR-C/X-SAR response to soil moisture, vegetation and surface roughness and development of an algorithm to retrieve these parameters; (2) Combination of the visible and near-infrared data and the SIR-C/X-SAR data to improve the range and accuracy of vegetation classification; (3) Testing of theoretical models for microwave propagation with SIR-C/X-SAR and microwave radiometric measurements over rough surfaces; and (4) Evaluation of a water balance model using SIR-C/X-SAR derived soil moisture values and other ancillary data. Progress, significant results and future plans are presented.
Remote sensing research of snow cover has been accomplished for nearly 40 years. The use of visible, near-infrared, active and passive-microwave remote sensing for the analysis of snow cover is reviewed with an emphasis on the work on the last decade.
No abstract available
Explore the source record for details and available documents.
A geocoded data management system applicable for hydrological applications was designed to demonstrate the utility of the Atmospheric and Oceanographic Information Processing System (AOIPS) for hydrological applications. Within that context, the geocoded hydrology data management system was designed to take advantage of the interactive capability of the AOIPS hardware. Portions of the Water Resource Data Management System which best demonstrate the interactive nature of the hydrology data management system were implemented on the AOIPS. A hydrological case study was prepared using all data supplied for the Bear River watershed located in northwest Utah, southeast Idaho, and western Wyoming.
This paper discusses a multisensor satellite approach for the study of hydrological applications. Spectral as well as spatial and temporal characteristics of specific operational and planned instruments applicable to hydrology are presented. A hydrology specific series of sensors are proposed to fill the gaps not covered by the current and planned systems. We have called this hypothetical platform HYDROSAT. In addition, the trade-offs between a geostationary satellite and a polar orbiter are explored.
An energy balance snowmelt model for rugged terrain was devised and coupled to a flow model. A literature review of remote sensing applications to hydrologic modeling was included along with a software development outline.
Data-driven algorithms have been widely used as effective tools to mimic hydrologic systems. Unlike black-box models, decision tree algorithms offer transparent representations of systems and reveal useful information about the underlying process. A popular class of decision tree models is model tree (MT), which is designed for predicting continuous variables. Most MT algorithms employ an exhaustive search mechanism and a pre-defined splitting criterion to generate a piecewise linear model. However, this approach is computationally intensive, and the selection of the splitting criterion can significantly affect the performance of the generated model. These drawbacks can limit the application of MTs to large datasets. To overcome these shortcomings, a new flexible Model Tree Generator (MTG) framework is introduced here. MTG is equipped with several modules to provide a flexible, efficient, and effective tool for generating MTs. The application of the algorithm is demonstrated through simulation of controlled discharge from several reservoirs across the Contiguous United States (CONUS).
After having been in orbit for less than one year, the Earth Resources Technology Satellite (ERTS-1) has shown that it provides very applicable data for more effective monitoring and management of surface water features over the globe. Mapping flooded areas, snowcover, and wetlands and surveying the size, type, and response of glaciers to climate are among the specific areas where ERTS-1 data were applied. In addition the data collection system has proven to be a reliable tool for gathering hydrologic data from remote regions. Turbidity variations in lakes and rivers were also observed and related to shoreline erosion, industrial plant effluent, and overall water quality.