Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hybrid model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

The optically thick C III spectrum. 2: Level/term populations and line/multiplet intensities using an improved hybrid model

An improved hybrid level/term calculation is employed to obtain C III level/term populations and line/fractional multiplet intensities over the extended range of electron density 4.0 less than or equal log N(sub e) less than or equal 12.0, for column lengths L ranging from zero (optically thin) to 10(exp 20)/sq cm (moderately optically thick), at electron temperatures T(sub e) approximately 40,000 K(log T(sub e) = 4.6), T(sub e) approximately 63,000 K (log T(sub e) = 4.8), T(sub e) approximately 79,500 K (log T(sub e) = 4.9), and T(sub e) = 100,000 K (log T(sub e) = 5.0). The tabulated results are relevant to the interpretation of space observations obtained over extended spectral ranges by new and planned facilities including the Hopkins Ultraviolet Telescope (HUT) and the Far-Ultraviolet Spectrographic Explorer (FUSE).

Bhatia, A. K.↗

Development of performance specifications for hybrid modeling of floating wind turbines in wave basin tests

Hybrid modeling—combining physical testing and numerical simulation in real time$-$opens new opportunities in floating wind turbine research. Wave basin testing is an important validation step for floating support structure design, but the conventional approaches that use physical wind above the basin are limited by scaling problems in the aerodynamics. Applying wind turbine loads with an actuation system that is controlled by a simulation responding to the basin test in real time offers a way to avoid scaling problems and reduce cost barriers for floating wind turbine design validation in realistic coupled wind and wave conditions. This paper demonstrates the development of performance specifications for a system that couples a wave basin experiment with a wind turbine simulation. Two different points for the hybrid coupling are considered: the tower-base interface and the aero-rotor interface (the boundary between aerodynamics and the rotor structure). Analyzing simulations of three floating wind turbine designs across seven load cases reveals the motion and force requirements of the coupling system. By simulating errors in the hybrid coupling system, the sensitivity of the floating wind turbine response to coupling quality can be quantified. The sensitivity results can then be used to determine tolerances for motion tracking errors, force actuation errors, bandwidth limitations, and latency in the hybrid coupling system. These tolerances can guide the design of hybrid coupling systems to achieve desired levels of accuracy. An example demonstrates how the developed methods can be used to generate performance specifications for a system at 1:50 scale. Results show that sensitivities vary significantly between support structure designs and that coupling at the aero-rotor interface has less stringent requirements than those for coupling at the tower base. As a result, the methods and results presented here can inform design of future hybrid coupling systems and enhance understanding of how test results are affected by hybrid coupling quality.

16 TIDAL AND WAVE POWER↗

Hybrid model to evaluate the frequency-dependent leakage inductance of partially-filled transformers

The leakage inductance of a transformer designed for a power electronic converter can drop significantly as the switching frequency is increased due to skin and proximity effects. Although the magnetic image method-based double-2-D model can predict the low-frequency leakage inductance of a partially-filled transformer with sufficient accuracy, it is inherently a frequency-independent model. While Dowell’s 1-D model uses frequency-dependent relations to account for both skin and proximity effects, its accuracy is severely affected by the assumed winding geometry. In this paper, a semianalytical hybrid model is proposed that uses superposition to combine a modified Dowell’s model with the double-2-D model to predict the true leakage inductance of partially-filled transformers at any given frequency. All three conductor types—round, foil, and litz wire—are modeled and analyzed. The quasi-2-D model is further investigated on a variable inductance transformer (VIT) whose winding geometry can be modified mechanically to vary its leakage inductance. With less than 5 % error throughout, the semi-analytically evaluated leakage inductances are in excellent agreement with the finite element method (FEM) simulated and experimentally measured leakage inductances.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Optimization of ultrasonic array inspections using an efficient hybrid model and real crack shapes

Models which simulate the interaction of ultrasound with cracks can be used to optimize ultrasonic array inspections, but this approach can be time-consuming. To overcome this issue an efficient hybrid model is implemented which includes a finite element method that requires only a single layer of elements around the crack shape. Scattering Matrices are used to capture the scattering behavior of the individual cracks and a discussion on the angular degrees of freedom of elastodynamic scatterers is included. Real crack shapes are obtained from X-ray Computed Tomography images of cracked parts and these shapes are inputted into the hybrid model. The effect of using real crack shapes instead of straight notch shapes is demonstrated. An array optimization methodology which incorporates the hybrid model, an approximate single-scattering relative noise model and the real crack shapes is then described.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modelling grain-scattered ultrasound in austenitic stainless-steel welds: A hybrid model

The ultrasonic inspection of austenitic stainless steel welds can be challenging due to their coarse grain structure, charaterised by preferentially oriented, elongated grains. The anisotropy of the weld is manifested as both a ‘steering’ of the beam and the back-scatter of energy due to the macroscopic granular structure of the weld. However, the influence of weld properties, such as mean grain size and orientation distribution, on the magnitude of scattered ultrasound is not well understood. A hybrid model has been developed to allow the study of grain-scatter effects in austenitic welds. An efficient 2D Finite Element (FE) method is used to calculate the complete scattering response from a single elliptical austenitic grain of arbitrary length and width as a function of the specific inspection frequency. A grain allocation model of the weld is presented to approximate the characteristic structures observed in austenitic welds and the complete scattering behaviour of each grain calculated. This model is incorporated into a semi-analytical framework for a single-element inspection of a typical weld in immersion. Experimental validation evidence is demonstrated indicating excellent qualitative agreement of SNR as a function of frequency and a minimum SNR difference of 2 dB at a centre frequency of 2.25 MHz. Additionally, an example Monte-Carlo study is presented detailing the variation of SNR as a function of the anisotropy distribution of the weld, and the application of confidence analysis to inform inspection development.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Core-corona separation in the UrQMD hybrid model

We employ the UrQMD transport + hydrodynamics hybrid model to estimate the effects of a separation of the hot equilibrated core and the dilute corona created in high-energy heavy-ion collisions. It is shown that the fraction of the system that can be regarded as an equilibrated fireball changes over a wide range of energies. This has an impact, especially on strange particle abundances. We show that such a core corona separation allows for an improvement in the description of strange particle ratios and flow as a function of beam energy as well as strange particle yields as a function of centrality.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hybrid Model of Inhomogeneous Solar Wind Plasma Heating by Alfven Wave Spectrum: Parametric Studies

Observations of the solar wind plasma at 0.3 AU and beyond show that a turbulent spectrum of magnetic fluctuations is present. Remote sensing observations of the corona indicate that heavy ions are hotter than protons and their temperature is anisotropic (T(sub perpindicular / T(sub parallel) >> 1). We study the heating and the acceleration of multi-ion plasma in the solar wind by a turbulent spectrum of Alfvenic fluctuations using a 2-D hybrid numerical model. In the hybrid model the protons and heavy ions are treated kinetically as particles, while the electrons are included as neutralizing background fluid. This is the first two-dimensional hybrid parametric study of the solar wind plasma that includes an input turbulent wave spectrum guided by observation with inhomogeneous background density. We also investigate the effects of He++ ion beams in the inhomogeneous background plasma density on the heating of the solar wind plasma. The 2-D hybrid model treats parallel and oblique waves, together with cross-field inhomogeneity, self-consistently. We investigate the parametric dependence of the perpendicular heating, and the temperature anisotropy in the H+-He++ solar wind plasma. It was found that the scaling of the magnetic fluctuations power spectrum steepens in the higher-density regions, and the heating is channeled to these regions from the surrounding lower-density plasma due to wave refraction. The model parameters are applicable to the expected solar wind conditions at about 10 solar radii.

Ofman, L.↗

HYBRID Modeling of DETAIL Experimental Facility

Idaho National Laboratory continues to be at the forefront of advanced reactor systems and integrated energy systems research. Through the Thermal Energy Distribution System (TEDS) and Microreactor Agile Non-nuclear Test Bed (MAGNET) experiments in the Dynamic Energy Transport and Innovation Laboratory (DETAIL) within the Engineering Systems Laboratory, a mix of digital and physical testing systems can explore the operation of thermally and electrically integrated systems. Modeling of these systems has been done using the HYBRID modeling repository of the Integrated Energy Systems program. DETAIL also contains high temperature steam electrolysis (HTSE) units to produce hydrogen and generate the load imposed on MAGNET and TEDS. The dynamic modeling capabilities within the IES program describe the DETAIL components as-built and can be used to evaluate controls, process flows, and overall system conditions.

08 HYDROGEN↗

Modeling hybrid stars with an SU(3) nonlinear {sigma} model

We study the behavior of hybrid stars by using an extended hadronic and quark SU(3) nonlinear sigma model. The degrees of freedom change naturally, in this model, from hadrons to quarks as the density/temperature increases. At zero temperature, we reproduce massive neutron stars, which contain cores of hybrid matter of 2 km for the nonrotating case and 1.18 and 0.87 km, in the equatorial and polar directions, respectively, for stars that rotate at the Kepler frequency (physical cases lie in between). The cooling of such stars is also analyzed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hybrid model calculations of direct photons in high-energy nuclear collisions

Direct photon emission in heavy-ion collisions is calculated within a relativistic micro + macro hybrid model and compared to the microscopic transport model, the Ultra-relativistic Quantum Molecular Dynamics model. In the hybrid approach, the high-density part of the evolution is replaced by an ideal three-dimensional hydrodynamic calculation. This allows the effects of viscosity and full local thermalization, in comparison with the transport model of the ideal fluid dynamics, to be examined. The origin of high-p{sub perpendicular} photons as well as the impact of elementary high-sq root(s) collisions is studied. The contribution of different production channels and nonthermal radiation to the spectrum of direct photons is further explored. Detailed comparisons to the measurements by the WA98 Collaboration are also undertaken.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modal Bin Hybrid Model: A Surface Area Consistent, Triple Moment Sectional Method for Use in Process-oriented Modeling of Atmospheric Aerosols

A triple moment sectional method, Modal Bin Hybrid Model (MBHM), has been developed. In addition to number and mass (volume), surface area is predicted (and preserved), which is important for gas-to-particle mass transfer and light extinction cross section. The performance of MBHM was evaluated against double moment sectional (DMS) methods with various size resolutions up to BIN256 (BINx: x is number of sections over three orders of magnitude in size, ΔlogD = 3/x) for simulating evolution of particles under simultaneously occurring nucleation, condensation and coagulation processes. Because MBHM gives a physically consistent form of the intra-sectional distributions, errors and biases of MBHM at BIN4-8 resolution were almost equivalent to those of DMS at BIN16-32 resolution for various important variables such as the moments Mk (k: 0, 2, 3), dMk/dt, and the number and volume of particles larger than a certain diameter. Another important feature of MBHM is that only a single bin is adequate to simulate full aerosol dynamics for particles whose size distribution can be approximated by a single lognormal mode. This flexibility is useful for process-oriented (multi category and/or mixing state) modeling: primary aerosols whose size parameters would not differ substantially in time and space can be expressed by a single or a small number of modes, whereas secondary aerosols whose size changes drastically from one to several hundred nanometers can be expressed by a number of modes. Added dimensions can be applied to MBHM to represent mixing state or photo-chemical age for aerosol mixing state studies.

Kajino, Mizuo↗

Application of hybrid coordinate modeling and multilevel control techniques to a single axis torsional model

Hybrid coordinate modeling and multilevel control techniques are applied to a prototype flexible vehicle. The original hybrid coordinate model developed for this vehicle is expressed in terms of one rigid body coordinate and two modal vibration coordinates. Multilevel control techniques of decomposition, coordination and construction of the subproblem hierarchy are applied to this model.

Chichester, F. D.↗

Scalable Framework of Hybrid Modeling with Anticipatory Control Strategy for Autonomous Operation of Modular and Microreactors

This poster provides a high level overview of the Scalable Framework of Hybrid Modeling with Anticipatory Control Strategy for Autonomous Operation of Modular and Microreactors LDRD program to be presented at a poster session for students of the 2021 MeV School. The purpose of the poster is to provide other participants of the MeV School with a high level overview of the author's research direction.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Hybrid Modeling in the Era of Smart Manufacturing

Smart manufacturing (SM) is a new paradigm that allows manufacturing to enter its fourth revolution by exploiting state-of-the art sensing, communication and computation as the Industrial Internet of Things (IioT). Via the use of high-performance computing and advanced modeling, SM aims to improve the flexibility and adaptability of manufacturing. This paper addresses this trend by reviewing the combined use of data-driven and knowledge-enabled hybrid models (HM), and discusses how such techniques seamlessly fit in the SM platform. Furthermore, a discussion of the new paradigms of HM enabled by the SM platform is given, highlighting their importance in future large-scale applications of the SM platform.

42 ENGINEERING↗

A self-consistent hybrid model of kinetic striations in low-current argon discharges

A self-consistent hybrid model of standing and moving striations was developed for low-current DC discharges in noble gases. We introduced the concept of surface diffusion in phase space ( r , u ) (where u denotes the electron kinetic energy) described by a tensor diffusion in the nonlocal Fokker–Planck kinetic equation for electrons in the collisional plasma. Electrons diffuse along surfaces of constant total energy ε = u - eφ ( r ) between energy jumps in inelastic collisions with atoms. Numerical solutions of the 1d1u kinetic equation for electrons were obtained by two methods and coupled to ion transport and Poisson solver. We studied the dynamics of striation formation in Townsend and glow discharges in argon gas at low discharge currents using a two-level excitation-ionization model and a ‘full-chemistry’ model, which includes stepwise and Penning ionization. Standing striations appeared in Townsend and glow discharges at low currents, and moving striations were obtained for the discharge currents exceeding a critical value. These waves originate at the anode and propagate towards the cathode. We have seen two types of moving striations with the two-level and full-chemistry models, which resemble the s and p striations previously observed in the experiments. Simulations indicate that processes in the anode region could control moving striations in the positive column plasma. The developed model helps clarify the nature of standing and moving striations in DC discharges of noble gases at low discharge currents and low gas pressures.

Physics↗

On rotational discontinuities in both two-fluid and hybrid models

Rotational discontinuities are studied in a two-fluid model that includes finite ion inertia dispersion and in a hybrid model in which the full ion dynamics is retained while the electrons are treated as a massless fluid. It is shown that as in previous dissipative MHD studies, a rotational discontinuity is unstable in both models and evolves to a 2-3 intermediate shock, a slow rarefaction wave, and other waves. In addition, it is shown that the so-called Walen relation, which holds exactly for rotational discontinuities, can also be well satisfied by tran-Alfvenic intermediate shocks. Thus intermediate shocks can be candidates for those observed structures that satisfy the Walen relation.

Wu, C. C.↗

Formation of intermediate shocks in both two-fluid and hybrid models

Intermediate shocks are studied in a two-fluid model that includes finite ion inertia dispersion and in a hybrid model in which the full ion dynamics is retained while the electrons are treated as a massless fluid. It is shown that in both models intermediate shocks can be formed through wave steepening, meaning that they are stable and possess shock structures.

Wu, C. C.↗

Agent-Based Socio-Hydrological Hybrid Modeling for Water Resource Management

Hybrid socio-hydrological modeling has become indispensable for managing water resources in an increasingly unstable ecology caused by human activity. Most work on the subject has been focused on either qualitative socio-political recommendations with an unbounded list of vague factors or complex sociological and hydrological models with many assumptions and specialized usability. Here in this paper, we propose a simple agent-based socio-hydrological decision modeling framework for coupling dynamics associated with social behavior and groundwater contamination. The study shows that using social health risk, instead of contaminant concentration, as an optimization variable improves water management decisions aimed at maximizing social wellbeing. The social models and computational framework are designed with enough flexibility and simplicity to encourage extensions to more general socio-hydrological dynamics without compromising either computability or complexity for better data-/model-driven environmental management.

54 ENVIRONMENTAL SCIENCES↗