Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heterostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Synthesis of superconducting freestanding infinite-layer nickelate heterostructures on the millimetre scale

The development of superconductivity in infinite-layer nickelates through hole-doping relies on the controlled synthesis of Ni in a high oxidation state, followed by topotactic reduction to a very low oxidation state. So far, superconductivity has been realized only in epitaxial thin films. Here, in this work, we integrate these techniques with heterostructures that include an epitaxial soluble buffer layer, enabling the release of freestanding (Nd,Sr)NiO 2 heterostructures. The released heterostructures exhibit comparable structural and electronic properties to those of optimized thin films, with lateral dimensions ranging from millimetres to ~100 μm, depending on the degree of strain released with respect to the initial substrate. The changes in the superconducting transition temperature upon release of the heterostructure mirror those reported for variations in substrate and pressure, suggesting a common underlying response to strain in the infinite-layer nickelate superconductivity. These freestanding structures will facilitate a range of experimental studies without the constraints of substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Collective Modes in Multilayer Graphene/𝛼−RuCl 3 Heterostructures

Collective modes in multilayer graphene, such as plasmons and phonons, exhibit sensitivity to displacement fields and interlayer coupling, distinguishing them from their counterparts in single-layer graphene. Here, we engineer collective modes in charge-transfer heterostructures composed of multilayer graphene and 𝛼−RuCl 3 . In heterostructures with a single 𝛼−RuCl 3 interface, the charge transfer generates displacement fields up to 7 V/nm at the interface between 𝛼−RuCl 3 and the adjacent graphene layer—the highest value achieved through charge-transfer methods. As a result of the broken inversion symmetry, we discover enhanced nonlinear optical response and modified phonon selection rules. Conversely, we find that multilayer graphene sandwiched between two 𝛼−RuCl 3 flakes causes displacement fields to cancel. There, we achieve carrier densities as high as 8 ×10 13 cm −2 in multilayer graphene and restore the phonon selection rules to their unperturbed state. Meanwhile, we demonstrate that plasmonic properties derive from the depletion of multiple valence bands. As a result of the quasilinear band dispersion, these “Dirac multiband plasmons” are relatively unaffected by displacement fields. On the other hand, the inverted heterostructure sequence—two multilayer graphene sheets encapsulating 𝛼−RuCl 3 —activates significant alteration of the plasmons via interlayer plasmon-plasmon coupling. Hence, multilayer graphene and 𝛼−RuCl 3 heterostructures offer a gate-free platform for engineering collective modes derived from inversion symmetry and interlayer coupling.

Moore, Samuel L. [Columbia University, New York, N↗
DOE OSTI2026

A New Route Toward Atomically Flat and Defect-Free Ge/SiGe Planar Heterostructures

Germanium-based planar heterostructures are emerging as versatile platforms for realizing quantum devices. In particular, planar Ge/SiGe quantum wells (QWs) host hole states with exceptionally high mobility and strong, electrically tunable spin–orbit interactions, enabling full electrical control of quantum information. A key requirement for these systems is the growth of microscopic, defect-free, atomically flat Ge QW heterostructures on relaxed or reverse-graded SiGe buffer layers, as well as on commercial Ge substrates. While several physical deposition techniques have demonstrated high-quality planar Ge/SiGe QWs, a major challenge remains: minimizing defect density typically requires high growth temperatures, which are incompatible with standard CMOS process flows. Here, we present a convenient low-temperature process for realizing high-quality planar SiGe/Ge heterostructures using a combination of thermal and electron-beam evaporation. We systematically map the effects of ex-situ and in-situ substrate preparation protocols, growth temperature, and post-deposition annealing conditions, and correlate these parameters with surface roughness and defect density. We find that in-situ oxide desorption conditions and post-annealing parameters have the most pronounced impact on improving surface quality. Under optimized conditions, we achieve atomically smooth surfaces with root-mean-square roughness σrms​ ≤ 10 Å and negligible defect density. Interestingly, thermally evaporated Ge layers exhibit oriented triangular crystallites that elongate upon post-annealing in the presence of high Ge vapor pressure. These results demonstrate that this simple, low-temperature deposition approach is a viable and effective route for achieving high-quality Ge QW heterostructures, with strong potential for scalable quantum computing and sensing applications.

Tripathi, Malvika [Fermilab] (ORCID:00000001989251↗
DOE OSTI2026

A New Route Toward Atomically Flat and Defect-Free Ge/SiGe Planar Heterostructures

Germanium-based planar heterostructures are emerging as versatile platforms for realizing quantum devices. In particular, planar Ge/SiGe quantum wells (QWs) host hole states with exceptionally high mobility and strong, electrically tunable spin–orbit interactions, enabling full electrical control of quantum information. A key requirement for these systems is the growth of microscopic, defect-free, atomically flat Ge QW heterostructures on relaxed or reverse-graded SiGe buffer layers, as well as on commercial Ge substrates. While several physical deposition techniques have demonstrated high-quality planar Ge/SiGe QWs, a major challenge remains: minimizing defect density typically requires high growth temperatures, which are incompatible with standard CMOS process flows. Here, we present a convenient low-temperature process for realizing high-quality planar SiGe/Ge heterostructures using a combination of thermal and electron-beam evaporation. We systematically map the effects of ex-situ and in-situ substrate preparation protocols, growth temperature, and post-deposition annealing conditions, and correlate these parameters with surface roughness and defect density. We find that in-situ oxide desorption conditions and post-annealing parameters have the most pronounced impact on improving surface quality. Under optimized conditions, we achieve atomically smooth surfaces with root-mean-square roughness σrms​ ≤ 10 Å and negligible defect density. Interestingly, thermally evaporated Ge layers exhibit oriented triangular crystallites that elongate upon post-annealing in the presence of high Ge vapor pressure. These results demonstrate that this simple, low-temperature deposition approach is a viable and effective route for achieving high-quality Ge QW heterostructures, with strong potential for scalable quantum computing and sensing applications.

Tripathi, Malvika [Fermilab] (ORCID:00000001989251↗
DOE OSTI2026

Heterogeneous Integration of Flipped Oxide Heterostructure Membranes for Nanoelectronics

Freestanding complex oxide membranes enable the release and transfer of epitaxial films, offering new design freedoms for next‐generation electronics. While the LaAlO 3 /SrTiO 3 (LAO/STO) heterostructure exhibits remarkable tunable conductivity at its interface, the active interface remains buried beneath the substrate, limiting access to this functionality. Here, we demonstrate how the LAO/STO heterostructure, in membrane form, can be flipped and precisely positioned on silicon and other platforms using polymer‐free micromanipulation. The transferred membranes preserve atomically smooth surfaces, high crystallinity, and key electronic properties. Through the 44‐nm insulating STO layer, ultra‐low‐voltage electron‐beam lithography (ULV‐EBL) writes conductive nanostructures at the now‐accessible STO/LAO interface, offering the potential to function as programmable local gates that modulate charge carriers in the underlying silicon. The platform establishes a general strategy for integrating complex oxide heterostructures with semiconductors, quantum materials, and flexible substrates, enabling new architectures for reprogrammable nanoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantifying Twist Angles in Cuprate Heterostructures with Anisotropic Raman Signatures

Artificially engineered twisted van der Waals (vdW) heterostructures have unlocked new pathways for exploring emergent quantum phenomena and strongly correlated electronic states. Many of these phenomena are highly sensitive to the twist angle, which can be deliberately tuned to tailor the interlayer interactions. This makes the twist angle a critical tunable parameter, emphasizing the need for precise control and accurate characterization during device fabrication. In particular, twisted cuprate heterostructures based on Bi 2 Sr 2 CaCu 2 O 8 + x (BSCCO) have demonstrated angle-dependent superconducting properties, positioning the twist angle as a key tunable parameter. However, the twisted interface is highly unstable under ambient conditions and vulnerable to damage from conventional characterization tools such as electron microscopy or scanning probe techniques. In this work, a fully non-invasive, polarization-resolved Raman spectroscopy approach is introduced for determining twist angles in artificially stacked BSCCO heterostructures. By analyzing twist-dependent anisotropic vibrational Raman modes, particularly utilizing the out-of-plane A 1g vibrational mode of Bi/Sr at ≈116 cm −1 , clear optical fingerprints of the rotational misalignment between cuprate layers are identified. The high-resolution confocal Raman setup, equipped with polarization control and RayShield filtering down to 10 cm −1 , allows for reliable and reproducible measurements without compromising the material's structural integrity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Epitaxial aluminum layer on antimonide heterostructures for exploring Josephson junction effects

In this study, we present results of our recent work of epitaxially-grown aluminum (epi-Al) on antimonide heterostructures, where the epi-Al thin film is grown at either room temperature or below zero °C. A sharp superconducting transition at T ∼ 1.3 K is observed in these epi-Al films. We further show that supercurrent states are realized in Josephson junctions fabricated in the epi-Al/antimonide heterostructures with mobility μ ∼ 1.0 × 10 6 cm 2 /Vs. These results clearly demonstrate we have achieved growing high-quality epi-Al/antimonide heterostructures, a promising platform for the exploration of Josephson junction effects for quantum information science and microelectronics applications.

Antimonide heterostructures↗
DOE OSTI2025

Sensitized Near-Infrared Emission of SiGe Nanocrystals via Heterostructuring with Quasi Two-Dimensional Perovskite

The near-infrared (NIR) emission of silicon–germanium alloy nanocrystals (SiGe NCs) was sensitized by heterostructuring with a quasi two-dimensional (Q-2D) perovskite (CsPbBr 3 blended with butylammonium bromide (BABr)). Colloidal SiGe NCs were synthesized by using a nonthermal plasma method with chloride precursors. As-synthesized SiGe NCs showed no detectable photoluminescence (PL). Embedding the SiGe NCs within the perovskite matrix via spin coating led to a heterostructure exhibiting dual emissions: green emission at 520 nm from the perovskite and NIR emission at 1035 nm from the SiGe NCs. Time-integrated and resolved PL measurements and transient absorption spectroscopy revealed energy transfer from the perovskite to the SiGe NCs, which sensitized the NIR emission from the SiGe NCs and quenched the green PL for the perovskite. These results demonstrate that Ge alloying can effectively tune the bandgap of Si NCs and highlight the feasibility of heterostructuring perovskites and photoluminescent NCs to enhance or activate their PL. In conclusion, this approach broadens their potential applications in the NIR region.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A-Cation-Dependent Structure–Optical Property Relationships of Halide Perovskite Heterostructures with Complex Interfaces

Halide perovskite heterostructures offer promising interfacial interactions for energy conversion, yet challenges in synthesizing structurally well-defined systems limit detailed investigations into structure–property relationships. In this article, we report the synthesis of compositionally controlled 3D/3D and 3D/2D halide perovskite heterostructures using evaporation crystallization-polymer pen lithography (EC-PPL) and a single-particle analysis of their properties. By systematically varying A-site cation combinations and crystal dimensions, we show that heterointerfaces induce local lattice distortions that modulate vibrational dynamics and electron-phonon coupling. These interfacial effects result in significantly extended carrier lifetimes compared to compositionally similar pure phases. Raman spectroscopy, temperature-dependent photoluminescence, and power-dependent emission analysis reveal that localized structural modulations at the interface govern exciton-phonon interactions. These effects are magnified in smaller crystals due to increased interfacial contributions. Our findings highlight the critical role of interface-driven lattice control in tuning the optoelectronic properties of halide perovskites and provide design principles for engineering heterostructures in next-generation optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sputtered ferroelectric aluminum scandium boron nitride (Al 1−x−y B x Sc y N)/ n -GaN heterostructures

This work demonstrates ferroelectric switching in magnetron sputtered Al 1−x−y B x Sc y N/ n -GaN heterostructures. Using high power impulse magnetron sputtering, a silicon doped n -GaN bottom electrode with an electron concentration of 6.0 × 10 19 cm −3 is grown on c-plane sapphire. Al 1−x−y B x Sc y N films are prepared on the GaN surface with Al:B:Sc ratios that produce tensile, lattice matched, or compressive epitaxial strains. X-ray diffraction shows that lattice matched and compressively strained Al 1−x−y B x Sc y N compositions are pseudomorphic, while partial relaxation is observed for tensilely strained Al 1−x−y B x Sc y N/ n -GaN heterostructures. Electrically, the Al 1−x−y B x Sc y N/ n -GaN stacks show robust hysteresis; the P–E loops are fully saturated with both lattice matched and compressively strained Al 1−x−y B x Sc y N compositions exhibiting remanent polarization values of 135 μC/cm 2 . For comparison, Al 1−x−y B x Sc y N films are also prepared on metal organic chemical vapor deposition and single crystal GaN substrates to extend strain and morphology trends to more common substrate types. This report validates that sputter deposition is a feasible technique for fabricating strain-tunable ferroelectric III–N heterostructures with high crystalline fidelity and smooth surface morphologies.

42 ENGINEERING↗
DOE OSTI2025

Type-I and type-II interfaces in a MoSe 2 /WS 2 van der Waals heterostructure

We report experimental evidence that MoSe 2 and WS 2 allow the formation of type-I and type-II interfaces, according to the thickness of the former. Heterostructure samples are obtained by stacking a monolayer WS 2 flake on top of a MoSe 2 flake that contains regions of thickness from one to four layers. Photoluminescence spectroscopy and transient absorption measurements reveal a type-II interface in the regions of monolayer MoSe 2 in contact with monolayer WS 2 . In other regions of the heterostructure formed by multilayer MoSe 2 and monolayer WS 2 , features of type-I interface are observed, including the absence of charge transfer and dominance of intralayer excitons in MoSe 2 . Furthermore, the coexistence of type-I and type-II interfaces in a single heterostructure offers opportunities to design sophisticated two-dimensional materials with finely controlled photocarrier behaviors.

2D materials↗
DOE OSTI2025

Anion Vacancies Coupling with Heterostructures Enable Advanced Aerogel Cathode for Ultrafast Aqueous Zinc‐Ion Storage

As a potential cathode material, manganese-based sulfide has recently attracted increasing interest due to its many advantages in aqueous zinc-ion storage. Unfortunately, some challenges such as sluggish kinetics, unstable structure, and controversial phase transition mechanism during the energy storage process hinder its practical application. Herein, inspired by density functional theory (DFT) calculations, a novel 3D sulfur vacancy-rich and heterostructured MnS/MXene aerogel is designed, and used as a cathode for aqueous Zn-ion batteries/hybrid capacitors (ZIBs/ZICs) for the first time. Thanks to the synergistic modification strategy of sulfur vacancies and heterostructures, the as-constructed MnS/MXene//Zn ZIBs exhibit significantly enhanced electrochemical properties, especially outstanding rate capability and cyclic stability. More encouragingly, the as-assembled MnS/MXene//porous carbon (PC) ZICs exhibit an ultrahigh energy density, a high power density, and a splendid cycling lifespan. Most notably, systematic kinetic analyses, ex situ characterizations, and DFT calculations illustrate that MnS/MXene first irreversibly converts into MnO x @ZnMnO 3 /MXene, and then undergoes a reversible conversion from MnO x @ZnMnO 3 /MXene to MnOOH@ZnMn 2 O 4 /MXene, accompanied by the co-insertion/extraction of H + and Zn 2+ . Further, the synergistic modification strategy of sulfur vacancies and heterostructures and the thorough mechanistic study proposed in this work offer valuable guidance for designing and exploiting high-performance cathodes in aqueous zinc-based energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2025

Spin Frustration and Unconventional Surface Spin Canting State in Van der Waals Ferromagnet/Antiferromagnet Heterostructures

Atomically flat surfaces of van der Waals (vdW) materials pave an avenue for addressing a long-standing fundamental issue of how a compensated antiferromagnet (AFM) surface frustrates a ferromagnetic (FM) overlayer in FM/AFM heterostructures. We investigate Fe5GeTe2/NiPS3 vdW heterostructures by characterizing AFM and FM spins separately. We find that in-plane zig-zag AFM NiPS3 develops three equivalent AFM domains, which are robust against external magnetic field and magnetic coupling with Fe5GeTe2. Moreover, evidence is provided of in-plane-AFM-induced perpendicular magnetic anisotropy (PMA) in adjacent Fe5GeTe2, and an unconventional out-of-plane surface spin canting state with the Fe5GeTe2 spins spatially turn from out-of-plane direction near the interface to in-plane direction away from the interface in Fe5GeTe2/NiPS3. The out-of-plane surface spin canting is a unique property of spin frustration in vdW magnetic heterostructures.

Wang, Tianye↗
DOE OSTI2025

High‐Temperature Single‐Photon Emission From Covalently Functionalized van der Waals Heterostructures

Two-dimensional (2D) transition metal dichalcogenides (TMDs) such as tungsten diselenide (WSe 2 ) are attractive nanomaterials for quantum information applications due to single-photon emission (SPE) from intrinsic atomic defects. Defect and strain engineering techniques have been developed to produce high purity, deterministically placed SPE in WSe 2 . However, a major challenge in the application of these techniques is the low temperature required to observe defect-bound TMD exciton emission, typically limiting SPE to T < 30 K. SPE at higher temperatures either loses purity or requires integration into complex devices such as optical cavities. Here, 2D heterostructure engineering and molecular functionalization are combined to achieve high purity (>90%) SPE in strained WSe 2 persisting to over T = 90 K. Covalent diazonium functionalization of graphite in layered WSe 2 /graphite heterostructures maintains high purity up to T = 90 K and single-photon source integrity up to T = 115 K. This method preserves the best qualities of SPE from WSe 2 while increasing working temperature to more than three times the typical range. This work demonstrates the versatility of surface functionalization and heterostructure design to synergistically improve the properties of quantum emission and offers new insights into the phenomenon of SPE from 2D materials.

2D materials↗
DOE OSTI2025

Orientation-Driven Chirality Funnels in Chiral Low-Dimensional Lead-Halide Perovskite Heterostructures

Chiral hybrid metal-halide perovskites show low-symmetry crystal structures, large Rashba splitting, spin-filtering, and strong chiroptical activity. Circular dichroism and circularly polarized photoluminescence have been investigated in chiral perovskites with increasingly distorted chiral structures. Here, we report the fabrication of chiral (R/S)-EBAPbI3 (EBA = α-ethylbenzylamine) single crystals, which possess highly distorted octahedral structures with a high angle variance value of ∼68 degree2. Using control in the fabrication conditions, we transfer chiral single crystals to thin films and achieve different crystal orientation preferences that induce tunable chiroptical properties to their heterostructures with PbI2 nanodomains, which we characterize with in situ X-ray diffraction and grazing-incidence wide-angle X-ray scattering measurements. Using transient chiroptical spectroscopies, we resolve photoexcited charge carrier dynamics and chirality transfer processes in such heterostructures down to cryogenic temperatures. We observe rapid carrier transfer along the in-plane (002) facets in chiral perovskite phases to PbI2 nanostructures within the initial few picoseconds, while carrier transfer along the out-of-plane (002) facets occurs at a slower rate. This fast transfer process leads to high photoluminescence intensities and large degrees of circular polarization in the emission from PbI2 nanodomains at cryogenic temperatures. Our findings report a multidimensional chiral-achiral heterostructure which takes advantage of controllable chirality transfer and offers new routes for future spintronic and chiroptical applications.

Liu, Shangpu↗
DOE OSTI2025

Interface magnetism in vanadium-doped MoS 2 /graphene heterostructures

Magnetism in two-dimensional materials is of great importance in discovering new physical phenomena and developing new devices at the nanoscale. In this paper, first-principles simulations are used to calculate the electronic and magnetic properties of heterostructures composed of graphene and MoS 2 considering the influence of point defects and vanadium doping. It is found that the concentration of the dopants and the types of defects can result in induced magnetic moments leading to ferromagnetically polarized systems with sharp interfaces. This provides a framework for interpreting the experimental observations of enhanced ferromagnetism in both MoS 2 /graphene and V-doped MoS 2 /graphene heterostructures. The computed electronic and spin polarizations give a microscopic understanding of the origin of ferromagnetism in these systems and illustrate how doping and defect engineering can lead to targeted property tunability. Our work has demonstrated that through defects engineering, ferromagnetism can be achieved in V-doped MoS2/graphene heterostructures, providing a potential way to induce magnetization in other TMDC/graphene materials and opening new opportunities for their applications in nano-spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Deep-ultraviolet transparent conducting SrSnO 3 via heterostructure design

Exploration and advancements in ultrawide bandgap (UWBG) semiconductors are pivotal for next-generation high-power electronics and deep-ultraviolet (DUV) optoelectronics. Here, we used a thin heterostructure design to facilitate high conductivity due to the low electron mass and relatively weak electron-phonon coupling, while the atomically thin films ensured high transparency. We used a heterostructure comprising SrSnO 3 /La:SrSnO 3 /GdScO 3 (110), and applied electrostatic gating, which allow us to effectively separate charge carriers in SrSnO 3 from dopants and achieve phonon-limited transport behavior in strain-stabilized tetragonal SrSnO 3 . This led to a modulation of carrier density from 10 18 to 10 20 cm −3 , with room temperature mobilities ranging from 40 to 140 cm 2 V −1 s −1 . The phonon-limited mobility, calculated from first principles, closely matched experimental results, suggesting that room temperature mobility could be further increased with higher electron density. In addition, the sample exhibited 85% optical transparency at a 300-nm wavelength. These findings highlight the potential of heterostructure design for transparent UWBG semiconductor applications, especially in DUV regime.

Science & Technology - Other Topics↗
DOE OSTI2024

High-Density Capacitive Energy Storage in Low-Dielectric-Constant Polymer PMMA/2D Mica Nanofillers Heterostructure Composite

The ubiquitous, rising demand for energy storage devices with ultra-high storage capacity and efficiency has drawn tremendous research interest in developing energy storage devices. Dielectric polymers are one of the most suitable materials used to fabricate electrostatic capacitive energy storage devices with thin-film geometry with high power density. In this work, we studied the dielectric properties, electric polarization, and energy density of PMMA/2D Mica nanocomposite capacitors where stratified 2D nanofillers are interfaced between the multiple layers of PMMA thin films using two heterostructure designs of the capacitors, PMMA/2D Mica/PMMA (PMP) and PMMA/2D Mica/PMMA/2D Mica/PMMA (PMPMP). The incorporation of a 2D Mica nanofiller in the low-dielectric-constant PMMA leads to an enhancement in the dielectric constant, with ∆ε ~ 15% and 53% for PMP and PMPMP heterostructures at room temperature. Additionally, a significant improvement in discharged energy density was measured for the PMPMP capacitor (Ud ~ 38 J/cm3 at 825 MV/m) compared to the pristine PMMA (Ud ~ 9.5 J/cm3 at 522 MV/m) and PMP capacitors (Ud ~ 19 J/cm3 at 740 MV/m). This excellent capacitive and energy storage performance of the PMMA/2D Mica heterostructure nanocomposite may inform the fabrication of thin-film, high-density energy storage capacitor devices for potential applications in various platforms.

Biochemistry & Molecular Biology↗