Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heat Index”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Thermal Resilience of Residential Building with Thermally Anisotropic Building Envelope Connected to Geothermal Sources

Heat waves and cold snaps have become more frequent and more intense because of climate change. A heat wave and a cold snap are a period of excessively hot and cold weather, respectively, that poses severe risks to building occupants’ health, especially for vulnerable people. They increase electrical energy consumption and put high stress on the grid which leads to potential power outages. Therefore, it is critical to assess and actively improve the thermal resilience of buildings to cope with heat waves, cold snaps, and power outages. The thermally anisotropic building envelope (TABE) is a novel active building envelope that can save energy while maintaining thermal comfort in buildings by redirecting heat and coolness from building envelopes to hydronic loops. When connecting to a ground thermal loop (GL), TABE can utilize the relatively stable temperature of the ground to protect the indoor environment during heat waves and cold snaps. This study assesses the thermal resilience of residential buildings that installed TABE and used ground thermal energy to supply the hydronic loops, abbreviated as ground thermal loop or TABE+GL. The simulation and analysis are conducted for the US Department of Energy prototype single-family detached residential building in the hot climate of Miami, Florida and Tucson, Arizona, and the cold climate of Denver, Colorado, and Rochester, Minnesota. Heat waves and cold snaps were obtained from the historical weather data of 1998-2020 for the studied regions. Three thermal resilience metrics, including the standard effective temperature (SET) degree-hours, the Heat Index, and the Hours of Safety (HOS) were used to quantify the effect of TABE+GL. The results showed that buildings installed TABE+GL could significantly reduce the average SET degree-hours above 30°C, increase HOS, and greatly improve thermal resilience.

Shen, Zhenglai↗
NASA NTRS1990

The use of remotely sensed surface temperature and a spectral vegetation index for evaluating heat fluxes over the Konza Prairie

The relationship between surface temperature T(s) and the normalized difference vegetation index (NDVI) is examined to determine whether it can be used to characterize latent heat fluxes (LEs). The regression of T(s) on NDVI is studied in the context of surface heat fluxes over the prairie with a limited data set for four flux-measurement sites. The 17 flux-measurement stations at the sites provided data that are consistently significant at the 99-percent confidence level for the regression of T(s) on NDVI. Variations in the regression slopes are found to correlate with variations in the ground heat flux but not with LE. Important components of the regression of T(s) on NDVI include fractional vegetation cover and surface-soil moisture conditions. The relationship is important for determining the relative contributions of the soil and vegetation components of an area's total evaporative flux.

Hope, A. S.↗
NASA NTRSDate not supplied

Establishing an Urban Heat Exposure Severity Index for Infrastructure Prioritization in Tempe, Arizona, Using NASA Earth Observations and LiDAR

Located on the banks of the Salt River in the Sonoran Desert, Tempe, Arizona, features a semi-arid climate with summer daily maximum temperatures regularly exceeding 37.8°C. Tempe is also subject to the southwestern monsoon season from July-September and the humidity exacerbates the high temperatures. Furthermore, the rapid urbanization experienced in Tempe has resulted in an intensification of the urban heat island. The summer of 2020 shattered the previous record of days exceeding 43.4°C, leading to higher energy and water costs, lower comfort, and increased risk of heat stroke for residents. Recognizing the impacts of extreme heat, the City of Tempe partnered with the Healthy Urban Environments initiative and NASA DEVELOP to identify census tracts that experience a higher mean land surface temperature than the city average. The NASA DEVELOP team used remotely sensed land surface temperature (LST), normalized difference vegetation index (NDVI), normalized difference built-up index (NDBI), normalized difference water index (NDWI), and albedo data calculated from Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) and Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS) instruments from 2015 to 2020 to create heat hazard and exposure maps. LiDAR point cloud data, provided by the United States Geological Survey through Arizona State University’s Map and Geospatial Hub, were used to derive 3D buildings, building footprints, and tree point data for a shading analysis of walking paths, roads, and buildings at the census tract level. In situ meteorological measurements including air temperature and humidity were used to compare the macro-scale temperature measurements. The team worked with the City of Tempe to develop a methodology to process available data and identify areas of highest concern for urban heat effects within the city. With these insights, Tempe, Arizona can better address these issues with data-driven information to make decisions regarding heat mitigation and adaptation efforts.

John Dialesandro↗
NASA NTRS1992

Spatial and temporal variations of the fluxes of carbon dioxide and sensible and latent heat over the FIFE site

Airborne measurements of flux densities of carbon dioxide CO2, sensible heat, and latent heat (H2O) obtained over the First ISLSCP Field Experiment (FIFE) site during three intensive field campaigns in 1987 and one in 1989 are examined to characterize the spatial and temporal variations of CO2 and energy transfer processes. These data were collected by the National Research Council Twin Otter using low-level flight patterns, all flown at constant pressure altitude during relatively clear days. The spatial variations are larger in 1989 than in 1987 and a higher correlation is observed between the fluxes and the surface features. The temporal patterns are easier to characterize with the relatively homogeneous situation of 1987. Functional relationships obtained between fluxes of CO2 and latent heat, CO2 fluxes and greenness index, latent heat fluxes and greenness index, and between sensible heat fluxes and surface air temperature differences are presented for one day in 1987 and one in 1989 as an example of the kind of information that can be obtained from grid flights at constant pressure altitude.

Desjardins, R. L.↗
NASA NTRSDate not supplied

Assessing Urban Heat in the Cincinnati and Covington Area to Inform Local Decision-Makers and Environmental Justice Initiatives

The Urban Heat Island effect is a phenomenon characterized by urban areas experiencing temperatures that are, on average, warmer than surrounding suburban and rural regions. Urban Heat Islands are fueled by expansive impervious surfaces, vehicle emissions, and insufficient urban green space. Densely populated urban centers like the Cincinnati, Ohio and Covington, Kentucky area can experience negative health impacts due to the Urban Heat Island. NASA DEVELOP partnered with Groundwork USA and Groundwork Ohio River Valley to combine environmental education and outreach with technical capacity building in NASA Earth observations. The DEVELOP team used Landsat 5 TM and ISS ECOSTRESS to calculate daytime and nighttime land surface temperature anomalies. The team found that the Cincinnati and Covington area was 8.32°F warmer during the day and 4.97°F warmer at night compared to non-urban areas. The team also ran the Natural Capital Project InVEST Urban Cooling Model to map a heat mitigation index for the study area. The heat mitigation index models the cooling capacity of each pixel and the effect of green spaces on the pixel’s ability to mitigate heat. Results show which communities are most vulnerable to impacts of increased urban heat. The team also assessed alternative tree canopy scenarios with the InVEST model to better understand the effectiveness of potential heat mitigation strategies. Increasing tree canopy cover by 25% in urbanized land cover types was found to reduce mean temperature across the study area by 0.87°F. Combining these results with work from Groundwork’s Climate Safe Neighborhoods program highlights the relationship between extreme heat and historical-race based housing practices in the region. Results provide partners at Groundwork with refined methodologies to support future education and outreach, as well as increase future capacity to NASA Earth observations.

Celeste Gambino↗
NASA NTRSDate not supplied

The Application of Remote Sensing using NASA Earth Observations paired with Sociodemographic Indicators to Identify Communities Most Susceptible to Urban Heat Exposure in Austin, Texas

In recent years, Austin, Texas has experienced an increase in population and urban development. Additionally, the City’s climate—already characterized by periods of extreme heat and drought—continues to change. As temperatures and demand for utilities and cooling resources rise, the number of heat-related deaths and illnesses in socially vulnerable populations (e.g., older, lower-income populations) is expected to increase. The City of Austin, The University of Texas at Austin (UT Austin), and The University of Texas Health Science Center at Houston (UT Health) partnered with NASA DEVELOP to examine the distribution of urban heat throughout the City. This project used land surface temperature, greenness, plant water content, and urban surface material analysis parameters derived from NASA Earth observations from Landsat 8 Operational Land Imager (OLI), Landsat 8 Thermal Infrared Sensor (TIRS), and Aqua and Terra Moderate Resolution Imaging Spectroradiometer (MODIS). The project team produced three different indices to create a spatial analysis for the study area including a social vulnerability index (SoVI), heat exposure index (HEI), and an overall heat priority index (HPI) score. This overall score was determined with a weighted analysis of heat-related environmental variables from NASA Earth observations and socioeconomic data from the 2019 American Community Survey. Based on the HPI score, the project team identified 121 census block groups out of 605 total that are designated as being most at risk of adverse impacts from extreme heat events. To test the sensitivity of the HPI, the team used a Monte Carlo analysis using different approaches for geographic scale, variable inclusion, census uncertainty, and index aggregation. Based on the sensitivity analysis, the resulting HPI score showed the metric was consistent with the baseline HPI. This provided increased confidence the score can be used as a tool to make informed infrastructure improvement plans in targeted areas (e.g., siting of cooling centers) and ensure equitable sustainable development.

Ryan Hammock↗
NASA NTRS1993

The use of a vegetation index for assessment of the urban heat island effect

A vegetation index and radiative surface temperature were derived from NOAA-11 Advanced Very High Resolution Radiometer (AVHRR) data for the Seattle, WA region from 28 June through 4 July 1991. The vegetation index and surface temperature values were computed for locations of weather observation stations within the region and compared to observed minimum air temperatures. These comparisons were used to evaluate the use of AVHRR data to assess the influence of the urban environment on observed minimum air temperatures (the urban heat island effect). AVHRR derived normalized difference vegetation index (NDVI) and radiant surface temperature data from a one week composite product were both related significantly to observed minimum temperatures, however, the vegetation index accounted for a greater amount of the spatial variation observed in mean minimum temperatures. The difference in the NDVI between urban and rural regions appears to be an indicator of the difference in surface properties (i.e., evaporation and heat storage capacity) between the two environments that are responsible for differences in urban and rural minimum temperatures.

Gallo, K. P.↗
NASA NTRS2013

Influence of Leaf Area Index Prescriptions on Simulations of Heat, Moisture, and Carbon Fluxes

Leaf-area index (LAI), the total one-sided surface area of leaf per ground surface area, is a key component of land surface models. We investigate the influence of differing, plausible LAI prescriptions on heat, moisture, and carbon fluxes simulated by the Community Atmosphere Biosphere Land Exchange (CABLEv1.4b) model over the Australian continent. A 15-member ensemble monthly LAI data-set is generated using the MODIS LAI product and gridded observations of temperature and precipitation. Offline simulations lasting 29 years (1980-2008) are carried out at 25 km resolution with the composite monthly means from the MODIS LAI product (control simulation) and compared with simulations using each of the 15-member ensemble monthly-varying LAI data-sets generated. The imposed changes in LAI did not strongly influence the sensible and latent fluxes but the carbon fluxes were more strongly affected. Croplands showed the largest sensitivity in gross primary production with differences ranging from -90 to 60 %. PFTs with high absolute LAI and low inter-annual variability, such as evergreen broadleaf trees, showed the least response to the different LAI prescriptions, whilst those with lower absolute LAI and higher inter-annual variability, such as croplands, were more sensitive. We show that reliance on a single LAI prescription may not accurately reflect the uncertainty in the simulation of the terrestrial carbon fluxes, especially for PFTs with high inter-annual variability. Our study highlights that the accurate representation of LAI in land surface models is key to the simulation of the terrestrial carbon cycle. Hence this will become critical in quantifying the uncertainty in future changes in primary production.

land-surface modeling↗
DOE OSTI2025

Mapping heat vulnerability in cities: A tale of two california cities

Extreme heat is a major cause of weather-related deaths in the United States. To address this, a heat vulnerability index (HVI) is crucial for assessing heat risk and identifying vulnerable urban areas and populations, supporting city planning and emergency response. Current HVI studies often use Principal Component Analysis (PCA) on environmental, socioeconomic, and medical data to aggregate vulnerability indicators into a single index. However, these fixed aggregation weights struggle to adapt to different use cases, which may require varying focuses. Moreover, existing tools primarily consider outdoor heat exposure, providing an incomplete picture of actual exposure, as people spend most of their time indoors. Our research introduces an HVI web mapping tool that addresses these gaps in the literature by: (1) allowing flexible weights to adapt to different use cases, and (2) uniquely integrating both outdoor and indoor heat exposure by considering building characteristics for a more comprehensive risk assessment. We demonstrated this tool in two California cities with contrasting climates: Fresno (inland, arid, hot summers) and Oakland (temperate coastal). This HVI mapping tool provides essential decision support for policymakers and stakeholders in both short-term heat mitigation and long-term urban planning for building interventions and infrastructure development.

BES↗
NASA NTRS1992

Effect of Index of Refraction on Radiation Characteristics in a Heated Absorbing, Emitting, and Scattering Layer

The index of refraction can considerably influence the temperature distribution and radiative heat flow in semitransparent materials such as some ceramics. For external radiant heating, the refractive index influences the amount of energy transmitted into the interior of the material. Emission within a material depends on the square of its refractive index, and hence this emission can be many times that for a biackbody radiating into a vacuum. Since radiation exiting through an interface into a vacuum cannot exceed that of a blackbody, there is extensive reflection at the internal surface of an interface, mostly by total internal reflection. This redistributes energy within the layer and tends to make its temperature distribution more uniform. The purpose of the present analysis is to show that, for radiative equilibrium in a gray layer with diffuse interfaces, the temperature distribution and radiative heat flux for any index of refraction can be obtained very simply from the results for an index of refraction of unity. For the situation studied here, the layer is subjected to external radiative heating incident on each of its surfaces. The material emits, absorbs, and isotropically scatters radiation. For simplicity the index of refraction is unity in the medium surrounding the layer. The surfaces of the layer are assumed diffuse. This is probably a reasonable approximation for a ceramic layer that has not been polished. When transmitted radiation or radiation emitted from the interior reaches the inner surface of an interface, the radiation is diffused and some of it thereby placed into angular directions for which there is total internal reflection. This provides a trapping effect for retaining energy within the layer and tends to equalize its temperature distribution. An analysis of temperature distributions in absorbing-emitting layers, including index of refraction effects, was developed by Gardon (1958) to predict cooling and heat treating of glass plates. The interfaces were optically smooth; the resulting specular reflections were computed from the Fresnel reflection laws. This provides a somewhat different behavior than for diffuse interfaces. A similar application was for heating that occurs in a window of a re-entry vehicle (Fowle et al., 1969). A number of recent papers (Rokhsaz and Dougherty, 1989; Ping and Lallemand, 1989; Crosbie and Shieh, 1990) further examined the effects of Fresnel boundary reflections and nonunity refractive index. Other examples of analyses of both steady and transient heat transfer to single or multiple plane layers (Amlin and Korpela, 1979; Tarshis et al., 1969) have used diffuse assumptions at the interfaces as in the present study

Siegel, R.↗
NASA NTRS1985

Objective Determination of Heat Wave Patterns

A simple index was developed in order to objectively characterize a heat wave pattern in either analyses or forecasts of 500 mb height. 500 mb height was chosen because this parameter is usually among the most accurate fields predicted by numerical models. In addition, it is highly correlated with the surface air temperature on many time scales. The heat index IN is designed to be applied to any region of interest and to be used for any objectively analyzed data and specifically those of NWP models.

Wolfson, N.↗
NASA NTRS2023

The Compound Risk of Heat and COVID-19 in New York City: Riskscapes, Physical and Social Factors, and Interventions

Climate change is disrupting the fundamental conditions of human life and exacerbating existing inequity by placing further burdens on communities that are already vulnerable. Risk exposure varies by where people live and work. In this article, we examine the spatial overlap of the compound risks of COVID-19 and extreme heat in New York City. We assess the relationship between socio-demographic and natural, built and social environmental characteristics, and the spatial correspondence of COVID-19 daily case rates across three pandemic waves. We use these data to create a compound risk index combining heat, COVID-19, density and social vulnerability. Our findings demonstrate that the compound risk of COVID-19 and heat are public health and equity challenges. Heat and COVID-19 exposure are influenced by natural, built, and social environmental factors, including access to mitigation infrastructure. Socio-demographic characteristics are significant indicators of COVID-19 and heat exposure and of where compound vulnerability exists. Using GIS mapping, we illustrate how COVID-19 risk geographies change across the three waves of the pandemic and the particular impact of vaccinations before the onset of the third wave. We, then, use our compound risk index to assess heat interventions undertaken by the City, identify neighborhoods of both adequate and inadequate coverage and provide recommendations for future interventions.

COVID-19↗
NASA NTRS2013

Climate Variability and Impact at NASA's Marshal Space Flight Center

Climate analysis for the Southeast U. S. has indicated that inland regions have experienced an average temperature increase of 2F since 1970. This trend is generally characterized by warmer winters with an indication of increased precipitation in the Fall season. Extended periods of limited rainfall in the Spring and Summer periods have had greater areal coverage and, at other times the number of precipitation events has been increasing. Climate model projections for the next 10-70 years indicate warmer temperatures for the Southeast U.S., particularly in the Spring and Summer, with some indication of more extremes in temperature and precipitation as shown in the table below. The realization of these types of regional climate changes in the form of extended heat waves and droughts and their subsequent stress on facilities, infrastructure, and workforce could have substantial impact on the activities and functions of NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama. This presentation will present the results of an examination of the 100 year temperature and precipitation record for MSFC. Local warming has cause an increase in daily maximum and minimum temperatures by nearly 3F, with a substantial increase in the number of maximum temperatures exceeding 90F and a decrease in the number of days with minimum temperatures below freezing. These trends have substantial impact of the number of heating / cooling degree days for the area. Yearly precipitation totals are inversely correlated with the change in mean temperature and the frequency of heavy rain events has remain consistent with the changes in yearly totals. An extended heat wave index was developed which shows an increase in frequency of heat waves over the last 35 years and a subsequent reduction in precipitation during the heat waves. This trend will contribute to more intense drought conditions over the northern Alabama region, increasing the potential of destructive wildfires in and around the Center. MSFC has begun using this climate change information to adapt short-term and long-term plans for Center operations.

Smoot, James L.↗
NASA NTRS1993

The use of a satellite derived vegetation index for assessment of the urban heat island effect

Satellite derived normalized difference (ND) vegetation index data, based on urban and rural region composed of a variety of land surface environments, are evaluated. These data are linearly related to the difference in observed urban and rural minimum temperatures. It is concluded that the difference in the ND index between urban and rural regions reflects the difference in the surface properties (evaporation and heat storage capacity) of these two environments and urban and rural minimum temperatures (the urban heat island effect).

Gallo, Kevin P.↗
DOE OSTI2025

Daytime urban heat stress in North America reduced by irrigation

There is considerable uncertainty regarding the impact of irrigation on heat stress, partly stemming from the choice of heat stress index. Moreover, existing simulations are at scales that cannot appropriately resolve population centres or clouds and thus the potential for human impacts. Using multi-year convection-permitting and urban-resolving regional climate simulations, we demonstrate that irrigation alleviates summertime heat stress across more than 1,600 urban clusters in North America. This holds true for most physiologically relevant heat stress indices. The impact of irrigation varies by climate zone, with more notable irrigation signals seen for arid urban clusters that are situated near heavily irrigated fields. Through a component attribution framework, we show that irrigation-induced changes in wet-bulb temperature, often used as a moist heat stress proxy in the geosciences, exhibit an opposite sign to the corresponding changes in wet bulb globe temperature—a more complete index for assessing both indoor and outdoor heat risk—across climate zones. In contrast, the local changes in both wet-bulb and wet bulb globe temperature due to urbanization have the same sign. Here, our results demonstrate a complex relationship between irrigation and heat stress, highlighting the importance of using appropriate heat stress indices when assessing the potential for population-scale human impacts.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1985

The global joule heat production rate and the AE index

The degree of accuracy with which the AE index may be used as a measure of the joule heat production rate is evaluated for a typical substorm event on March 18, 1978, by estimating the global joule heat production rate as a function of time on the basis of data obtained from the IMS's six meridian chains. It is found that, although the AE index is statistically linearly related to the global joule heat production rate, caution is required when one assumes that details of AE index time variations during individual events are representative of those of the joule heat production rate.

Wei, S.↗
NASA NTRS2022

Milwaukee Urban Development: Assessing Climate Vulnerability through the InVEST Model on Urban Cooling in Milwaukee Using NASA Earth Observations

Milwaukee’s neighborhoods experience increased social, health, and ecological stress from the Urban Heat Island (UHI) effect due to changing land cover and climate. Extreme urban heat disproportionately affects Black and Latine communities due to systematic disinvestment in infrastructure and lack of resources to cope with heat. Our partner, Groundwork Milwaukee, supports Environmental Justice organizing around urban heat in historically redlined neighborhoods. This study explores heat mitigation in Metcalfe Park, one such neighborhood that is a focus area for our partner, as well as across the city and county of Milwaukee. Our team utilized the Natural Capital Project’s Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) Model for urban cooling to model heat mitigation scenarios for Milwaukee in support of Groundwork’s climate resilience and heat mitigation work. The data inputs used in our analysis were Land Use Land Cover (LULC), evapotranspiration, and surface temperature derived from NASA Earth observations, as well as a biophysical table containing land cover class attributes. We developed a heat vulnerability index from American Community Survey datasets and satellite imagery to identify areas in most need of heat mitigation intervention. We found that central and northwest city areas, home to a majority of Milwaukee’s Black and Latine population, have low heat mitigation and high vulnerability to heat impacts compared to the rest of the county. We also found that tree canopy increases across scales are effective in promoting heat mitigation. Our results and end products will bolster the efforts of our partners to make decisions on heat mitigation strategies, build community resilience, and reverse legacies of environmental racism in the face of extreme heat and climate change.

urban heat island↗
NASA NTRS1992

Effect of Index of Refraction on Radiation Characteristics in a Heated Absorbing, Emitting, and Scattering Layer

The effect of the index of refraction on the temperature distribution and radiative heat flux in semitransparent materials, such as some ceramics, is investigated analytically. In the case considered here, a plane layer of a ceramic material is subjected to external radiative heating incident on each of its surfaces; the material emits, absorbs, and isotropically scatters radiation. It is shown that, for radiative equilibrium in a gray layer with diffuse interfaces, the temperature distribution and radiative heat flux for any index of refraction can be obtained in a simple manner from the results for an index of refraction of unity.

Siegel, R.↗