Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOMOGENIZATION METHODS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of Carbon Nanofiber Clustering on the Micromechanical Properties of a Cement Paste

The use of carbon nanofibers (CNFs) in cement systems has received significant interest over the last decade due to their nanoscale reinforcing potential. However, despite many reports on the formation of localized CNF clusters, their effect on the cement paste micromechanical properties and relation to the mechanical response at the macroscopic scale are still not fully understood. In this study, grid nanoindentation coupled with scanning electron microscopy and energy dispersive spectroscopy was used to determine the local elastic indentation modulus and hardness of a portland cement paste containing 0.2% CNFs with sub-micro and microscale CNF clusters. The presence of low stiffness and porous assemblage of phases (modulus of 15–25 GPa) was identified in the cement paste with CNFs and was attributed primarily to the interfacial zone surrounding the CNF clusters. The CNFs favored the formation of higher modulus C–S–H phases (>30 GPa) in the bulk paste at the expense of the lower stiffness C–S–H. Nanoindentation results combined with a microscale–macroscale upscaling homogenization method further revealed an elastic modulus of the CNF clusters in the range from 18 to 21 GPa, indicating that the CNF clusters acted as compliant inclusions relative to the cement paste.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Turbulent solutions of the Navier-Stokes equations

Analytical and numerical approaches to the mechanics of turbulent flow are examined in a general introduction and illustrated with graphs. Topics discussed include the averaged and unaveraged basic equations, numerical solutions and methods, homogeneous fluctuations and turbulence with no mean flow, uniformly sheared fluctuations and turbulence, inhomogeneous fluctuations and turbulence in a developing shear layer, and steady-state homogeneous turbulence with a spatially periodic body force.

Deissler, R. G.↗
NASA NTRS1990

Integrated topology and shape optimization in structural design

Structural optimization procedures usually start from a given design topology and vary its proportions or boundary shapes to achieve optimality under various constraints. Two different categories of structural optimization are distinguished in the literature, namely sizing and shape optimization. A major restriction in both cases is that the design topology is considered fixed and given. Questions concerning the general layout of a design (such as whether a truss or a solid structure should be used) as well as more detailed topology features (e.g., the number and connectivities of bars in a truss or the number of holes in a solid) have to be resolved by design experience before formulating the structural optimization model. Design quality of an optimized structure still depends strongly on engineering intuition. This article presents a novel approach for initiating formal structural optimization at an earlier stage, where the design topology is rigorously generated in addition to selecting shape and size dimensions. A three-phase design process is discussed: an optimal initial topology is created by a homogenization method as a gray level image, which is then transformed to a realizable design using computer vision techniques; this design is then parameterized and treated in detail by sizing and shape optimization. A fully automated process is described for trusses. Optimization of two dimensional solid structures is also discussed. Several application-oriented examples illustrate the usefulness of the proposed methodology.

Bremicker, M.↗
NASA NTRS2024

Achieving High Efficiency in Reduced Order Modeling for Large Scale Polycrystal Plasticity Simulations

Reduced order models for the nonlinear response of heterogeneous microstructures typically require a construction (or training) stage to build the reduced order basis. In this manuscript, an efficient model construction strategy for the eigenstrain homogenization method (EHM) is presented. The proposed strategy relies on a parallel, element-by-element, conjugate gradient solver. Near linear scaling has been achieved with respect to the number of degrees of freedom used to resolve the microstructure. Linear scaling with respect to the number of pre-analyses required to construct the reduced order model (ROM) follows from the EHM formulation. Furthermore, a parallel implementation for fast evaluation of the constructed ROM has been developed using shared memory parallelization. It has been shown that for large microstructures with ≈ 10,000 grains, the total computational cost of evaluating the nonlinear response of a polycrystal could be reduced by approximately an order of magnitude using 32 cores with respect to serial ROM simulation. The present methodology has been verified using an additively manufactured polycrystalline microstructure of a nickel-based superalloy, Inconel 625. The capability of the developed framework to construct a ROM for such large microstructures, as well as the ability of the ROM to predict average and local quantities of interest has been demonstrated.

microscale↗
NASA NTRS1983

A new method to measure homogeneous nucleation rates in shock tubes

The centered expansion wave of a shock tube is utilized to expand and supersaturate a condensable vapor in small concentration in an inert carrier gas. The supersaturated state, located at the rear of the expansion wave, is preserved for a controlled period and then terminated by a recompressing shock wave. During the period of supersaturation, condensation nuclei are formed homogeneously. The nucleation rate is measured as a function of supersaturation by a Mie-light scattering technique. The method is tested using water and the results are compared with classical nucleation theory.

Peters, F.↗
NASA NTRS1989

Method of preparing radially homogeneous mercury cadmium telluride crystals

Hg(1-x)Cd(x)Te is prepared in an improved directional solidification method in which a precast alloy sample containing predetermined amounts of Hg, Cd, and Te is disposed in a sealed ampule and a furnace providing two controlled temperature zones is translated upward past the ampule to provide melting and resolidification. The present improvement is directed to maintaining the zones at temperatures determined in accordance with a prescribed formula providing a thermal barrier between the zones with a maximum thickness and translating the furnace past the zones at a rate less the 0.31 micron/sec.

Lehoczky, Sandor L.↗
NASA NTRS1972

System identification computational considerations.

System identification methods may be accurately characterized as inverse computational problems. Three approaches to the computational problem are considered. Equation error methods are based on regression analysis techniques. Attention is given to the maximum conditional likelihood estimate and the maximum unconditional likelihood (Bayesian) estimate. Gradient dependent algorithms for solving the minimization problems are discussed, taking into account Gaussian methods, quadratic model methods, and the homogeneous function model method of Jacobson and Oksman. Some advanced methods are also examined.

Bowles, R. L.↗
NASA NTRS1977

Thermal microwave emission from a random inhomogeneous layer over a homogeneous medium using the method of invariant imbedding

The paper studies thermal microwave emission from an inhomogeneous slab of a random medium, with possible nonuniform absorption, scattering, and temperature profiles, bounded by different dielectrics on both sides. The invariant imbedding method is used to cast the boundary value problem of the radiative transfer equations into an initial value problem at zero slab thickness. As a numerical example, the angular and polarization variations of brightness temperatures for ice over water are considered.

Tsang, L.↗
NASA NTRS1994

A method and apparatus for measuring homogeneity with a material part

The present invention is directed to a method and apparatus for interactively analyzing the characteristics of a material part in real-time. The invention enables the storage, calculation and display of the properties of the material part. A ultrasonic scan is performed on the material part. The material properties are then calculated from the scanned data and displayed. An image system is then used to select one point of the material part in real time and display all of the associated properties of that one point interactively.

Roth, Don J.↗
NASA NTRS1972

Degree and plane of polarization of multiple scattered light. 1: Homogeneous cloud layers

The degree of polarization and the direction of the plane of polarization are calculated by a Monte Carlo method for homogeneous layers. Two solar zenith angles and a range of optical thicknesses up to 10 are considered. The results are compared with calculations for single scattered photons. For a given pair of incident and scattered directions, there are only two possible values for the direction of the plane of polarization differing by 90 deg for single scattering from spherical aerosols. The choice between these two values depends only on the sign of the element M(-) in the first row and second column of the scattering matrix in the I, Q, U, V representation. In most cases there is little change in the direction of the plane of polarization when multiple scattering is taken into account, so that this quantity can usually be predicted from a very simple trigonometric relationship to good accuracy. Measurements of the direction of the plane of polarization at appropriately chosen angles provides information about the size distribution of the scattering centers.

Kattawar, G. W.↗
DOE OSTI2022

NH-PINN: Neural homogenization-based physics-informed neural network for multiscale problems

Physics-informed neural network (PINN) is a data-driven approach to solving equations. It is successful in many applications; however, the accuracy of the PINN is not satisfactory when it is used to solve multiscale equations. Homogenization approximates a multiscale equation by a homogenized equation without multiscale property; it includes solving cell problems and the homogenized equation. The cell problems are periodic, and we propose an oversampling strategy that significantly improves the PINN accuracy on periodic problems. The homogenized equation has a constant or slow dependency coefficient and can also be solved by PINN accurately. We hence proposed a 3-step method, neural homogenization based PINN (NH-PINN), to improve the PINN accuracy for solving multiscale problems with the help of homogenization.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

POLCA8 - modelling of cross section variations inside hexagonal assemblies

This paper presents the POLCA8 approach for modelling non-constant cross section distributions inside hexagonal fuel assemblies. The multigroup diffusion equation is modified to account for intranodal cross section variations. The obtained equation is solved in a node-wise manner based on the Fourier expansion method. As a result of varying cross sections, the solution includes a particular part additionally to the homogeneous one. A method for obtaining the particular solution is derived. Numerical tests on a VVER-1000 core are presented showing the impact of cross-section variations to some key parameters for reactor operation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1990

Materials with periodic internal structure: Computation based on homogenization and comparison with experiment

The combination of thermal and mechanical loading expected in practice means that constitutive equations of metal matrix composites must be developed which deal with time-independent and time-dependent irreversible deformation. Also, the internal state of composites is extremely complicated which underlines the need to formulate macroscopic constitutive equations with a limited number of state variables which represent the internal state at the micro level. One available method for calculating the macro properties of composites in terms of the distribution and properties of the constituent materials is the method of homogenization whose formulation is based on the periodicity of the substructure of the composite. A homogenization procedure was developed which lends itself to the use of the finite element procedure. The efficiency of these procedures, to determine the macroscopic properties of a composite system from its constituent properties, was demonstrated utilizing an aluminum plate perforated by directionally oriented slits. The selection of this problem is based on the fact that, extensive experimental results exist, the macroscopic response is highly anisotropic, and that the slits provide very high stress gradients which severely test the effectiveness of the computational procedures. Furthermore, both elastic and plastic properties were investigated so that the application to practical systems with inelastic deformation should be able to proceed without difficulty. The effectiveness of the procedures was rigorously checked against experimental results and with the predictions of approximate calculations. Using the computational results it is illustrated how macroscopic constitutive equations can be expressed in forms of the elastic and limit load behavior.

Jansson, S.↗