Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Computer modeling of inversion layer MOS solar cells and arrays

A two dimensional numerical model of the inversion layer metal insulator semiconductor (IL/MIS) solar cell is proposed by using the finite element method. The two-dimensional current flow in the device is taken into account in this model. The electrostatic potential distribution, the electron concentration distribution, and the hole concentration distribution for different terminal voltages are simulated. The results of simple calculation are presented. The existing problems for this model are addressed. Future work is proposed. The MIS structures are studied and some of the results are reported.

Ho, Fat Duen↗
NASA NTRS1995

The latitudinal distribution of magnetic holes in the solar wind

A large number of magnetic holes have been found in the Ulysses data during its cruise in the ecliptic. They are interpreted as convecting structures, probably caused by the mirror instability which exists in high beta plasmas with anisotropic temperatures. The characteristics of the holes reflect the solar wind condition of the region in which the holes are formed, and the point of observation may be far removed from where the instability occurs. A preliminary survey appears to indicate that the number of holes has no significant radial dependence. However, the number of holes does appear to increase with increasing heliographic latitude. Yet the large scale solar wind structures with their compression regions disappeared at approximately 57 deg south latitude. Thus any causal relationship between the holes and large scale solar wind structures is questionable. The temperature anisotropy and high beta required by the mirror instability must be generated by other mechanisms. In order to tie the magnetic holes and the mirror instability to their cause, the evolution of their characteristics with heliocentric distance and latitude needs to be investigated. With the progression of Ulysses around the sun a survey will be conducted to ascertain the characteristics of the magnetic holes as a function of heliographic latitude and heliocentric distance. A comparison of the results with the solar wind conditions may lead to the identification of the magnetic hole generating mechanism(s).

Winterhalter, D.↗
NASA NTRS1948

Effect of Distribution of Basket-Hole Area on Simulated Altitude Performance of 25 1/2-Inch-Diameter Annular-Type Turbojet Combustor

A simulated altitude performance of a 25 1/2-inch-diameter annular-type turbojet combustor was performed to determine the effect of the distribution of basket-hole area on the altitude operational limits of the engine as imposed by the combustor.Total pressure drop was recorded, as well as the effect of fuel-nozzle flow capacity,and fuel-nozzle spray angle for one basket configuration. General observations were made for all configurations regarding flames, extent of afterburning, and durability of the baskets.

Olson, Walter T.↗
NASA NTRS1980

Anisotropic velocity distributions in M87 - Is a supermassive black hole necessary

A collisionless distribution of stars with an anisotropic velocity distribution is considered as a model for the cores of spherical galaxies. The first moment of the corresponding Boltzmann equation is integrated to give the resulting density and velocity dispersion profiles. These distributions plus a central point source of light give a good fit to the data from recent observations of M87 without requiring a supermassive central object. This model requires one less fitting parameter than published models incorporating a central black hole. The same model with no point source of light also provides a good fit to the normal E1 galaxy NGC 3379. The success of this model in describing the cores of both M87 and NGC 3379 suggests that a supermassive black hole is not necessary in either.

Duncan, M. J.↗
NASA NTRS2015

The Distribution and Annihilation of Dark Matter Around Black Holes

We use a Monte Carlo code to calculate the geodesic orbits of test particles around Kerr black holes, generating a distribution function of both bound and unbound populations of dark matter (DM) particles. From this distribution function, we calculate annihilation rates and observable gamma-ray spectra for a few simple DM models. The features of these spectra are sensitive to the black hole spin, observer inclination, and detailed properties of the DM annihilation cross-section and density profile. Confirming earlier analytic work, we find that for rapidly spinning black holes, the collisional Penrose process can reach efficiencies exceeding 600%, leading to a high-energy tail in the annihilation spectrum. The high particle density and large proper volume of the region immediately surrounding the horizon ensures that the observed flux from these extreme events is non-negligible.

astroparticle physics↗
NASA NTRS1952

Altitude Investigation of Gas Temperature Distribution at Turbine of Three Similar Axial-Flow Turbojet Engines

An investigation of the effect of inlet pressure, corrected engine speed, and turbine temperature level on turbine-inlet gas temperature distributions was conducted on a J40-WE-6, interim J40-WE-6, and prototype J40-WE-8 turbojet engine in the altitude wind tunnel at the NAC.4 Lewis laboratory. The engines were investigated over a range of simulated pressure altitudes from 15,000 to 55,000 feet, flight Mach numbers from 0.12 to 0.64, and corrected engine speeds from 7198 to 8026 rpm, The gas temperature distribution at the turbine of the three engines over the range of operating conditions investigated was considered satisfactory from the standpoint of desired temperature distribution with one exception - the distribution for the J40-WE-6 engine indicated a trend with decreasing engine-inlet pressure for the temperature to exceed the desired in the region of the blade hub. Installation of a compressor-outlet mixer vane assembly remedied this undesirable temperature distribution, The experimental data have shown that turbine-inlet temperature distributions are influenced in the expected manner by changes in compressor-outlet pressure or mass-flow distribution and by changes in combustor hole-area distribution. The similarity between turbine-inlet and turbine-outlet temperature distribution indicated only a small shift in temperature distribution imposed by the turbine rotors. The attainable jet thrusts of the three engines were influenced in different degrees and directions by changes in temperature distributions with change in engine-inlet pressure. Inability to match the desired temperature distribution resulted, for the J40-WE-6 engine, in an 11-percent thrust loss based on an average turbine-inlet temperature of 1500 F at an engine-inlet pressure of 500 pounds per square foot absolute. Departure from the desired temperature distribution in the Slade tip region results, for the prototype J40-WE-8 engine, in an attainable thrust increase of 3 to 4 percent as compared with that obtained if tip-region temperature limitations were observed.

Prince, W.R.↗
NASA NTRS2004

Sensitivity of the FVGCM to Changes in Ozone

We have carried out an experiment with the finite volume general circulation model (FVGCM). This experiment consisted of two different imposed changes in the climatological ozone fields assumed in the radiation code. for conditions with no significant ozone hole. This distribution was obtained from a 50-year simulation of the full stratospheric ozone chemistry, with a time-dependent chlorine loading, done with our off-line chemical transport model (CTM). Three years (1978-1980) of this simulation were averaged to form a monthly, zonal-mean ozone distribution that was used in the 20-year integration of the FVGCM for "unperturbed" conditions. The second 20-year GCM integration included a fully-developed ozone hole. This ozone distribution was from three years, 1998-2000, from the same CTM simulation. The goal of this work is to determine the coupled response of the chemistry and dynamics of the stratosphere. These experiments are the first step in understanding the coupled response. An important initial question concerns the significance of the signals: if 20-year integrations turn out to be too short, the runs will be extended.

Stolarski↗
NASA NTRS2018

Direct Observation of Electron Distributions Inside Millisecond Duration Electron Holes

Despite the importance of millisecond duration spatial structures [chorus wave nonlinearity or time domain structures (TDS)] to plasma dynamics, there have been no direct observations of the generation and interaction of these waves and TDS with electrons at the millisecond timescale required for their understanding. Through superposition of 0.195 ms Magnetospheric Multiscale Satellite electron measurements inside 37 superposed, millisecond duration electron holes, the first observations of electron spectra and pitch angle distributions on a submillisecond timescale have been obtained. They show that keV electrons inside the superposed electron hole are accelerated by several hundred volts and that the spectrum of electrons inside the electron hole contain several maxima and minima that are explained by a model of electron energy changes on entering the holes. We report the first observation of trapped electrons inside the TDS, in accordance with the theoretical requirement that such electrons must be present in order to form the phase space holes. Mechanisms of electron acceleration by electron holes (through perpendicular energy gain as the TDS moves into a converging magnetic field) and scattering (due to the perpendicular electric field) are discussed.

Mozer, F. S.↗
NASA NTRS1988

Linewidth broadening due to longitudinal spatial hole burning in a long distributed feedback laser

The spectral linewidth of a long distributed feedback (DFB) laser above threshold at high output power is investigated theoretically. Longitudinal spatial hole burning (LSHB) is shown to have important effects on the lasing characteristics and the broadening of linewidth. A four-wave coupled mode equation is developed to describe the LSHB phenomenon. The threshold gain and the carrier distribution are solved self-consistently above threshold at various output powers. The simulation results show that the power-linewidth product can increase by a factor greater than 2 due to LSHB for long DFB lasers. This theory has important implications on the limits of linewidth reduction by increasing the length of DFB lasers and on possible future device design for coherent optical systems.

Wu, Ming-Chiang↗
NASA NTRS1990

Dissociation and recombination of positive holes in minerals

The formation mechanisms are described of positive holes - electronic defects in the O2 sublattice - with attention given to detecting the positive surface charge of minerals with these holes. Charge distribution analysis (CDA) is presented which measures dielectric polarization in an inhomogeneous field. CDA can be applied to the detection of the peroxide/superoxide functionality caused by positive holes on the surface. It is demonstrated with obsidian that the measurements provide data on O(-) mobility as a function of surface-charge carrier density and on O(-) generation as a function of temperature.

Freund, Friedemann↗
NASA NTRS2004

Supermassive Black Holes and Galaxy Evolution

Supermassive black holes appear to be generic components of galactic nuclei. The formation and growth of black holes is intimately connected with the evolution of galaxies on a wide range of scales. For instance, mergers between galaxies containing nuclear black holes would produce supermassive binaries which eventually coalesce via the emission of gravitational radiation. The formation and decay of these binaries is expected to produce a number of observable signatures in the stellar distribution. Black holes can also affect the large-scale structure of galaxies by perturbing the orbits of stars that pass through the nucleus. Large-scale N-body simulations are beginning to generate testable predictions about these processes which will allow us to draw inferences about the formation history of supermassive black holes.

Merritt, D.↗
NASA NTRS1988

A model of auroral potential structures based on Dynamics Explorer plasma data

Dynamics Explorer 1 hot plasma data are used to investigate three major features of the mid-altitude auroral electron distribution -- the hole, the bump (at large pitch angles), and the loss cone. The results of a computer simulation show that these features can be approximately reproduced by a model involving an initial plasma sheet electron distribution and two potential drop regions that are widely separated in altitude. The observed distributions could not be reproduced, even qualitatively, by any of a wide range of distributed potential drops involving parallel electric fields at the point of observation.

Burch, J. L.↗