Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HEAT RATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Effect of Solution Heating Rate on Quasi-static and Dynamic Mechanical Properties of Al-Mg-Si-Cu Alloy

The effect of solution heating rate on quasi-static and dynamic mechanical properties of Al-Mg-Si-Cu alloy in bake hardening state was investigated through mechanical properties, microstructure and fracture morphology characterization in the present study. The results show that solution heating rate has a strong influence on microstructure, quasi-static and dynamic mechanical properties. As solution heating rate rises, the grain microstructure transforms from the elongated grains to equiaxed grains and the fraction of low-angle grain boundaries (LAGBs) also decreases. Moreover, the equivalent average grain size first decreases, and then increases. The relationship between solution heating rate and mechanical property is monotonic, not depending on strain rate. As solution heating rate rises, the yield strength, ultimate tensile strength and elongation decrease. In contrast to quasi-static loading, dynamic loading always tends to improve strengths and elongation. In addition, compared with the quasi-static tensile specimens, the dynamic tensile specimens possess a larger number of dislocations. Regardless of strain rate and solution heating rate, all the tensile specimens exhibit the ductile fracture mode. As solution rate rises, the dimples decrease and become shallow gradually. The dimples in dynamic fracture zone are larger and deeper than those in the quasi-static fracture zone.

36 MATERIALS SCIENCE↗

Inverse bremsstrahlung heating rate for dense plasmas in laser fields

We report a theoretical analysis of inverse bremsstrahlung heating rate in the eikonal approximation. The present analysis is performed for a dense plasma using the screened electron-ion interaction potential for the ion charge state Z{sub i} = 1 and for both the weak and strong plasma screening cases. We have also compared the eikonal results with the first Born approximation (FBA) [M. Moll et al., New J. Phys. 14, 065010 (2012)] calculation. We find that the magnitudes of inverse bremsstrahlung heating rate within the eikonal approximation (EA) are larger than the FBA values in the weak screening case (κ = 0.03 a.u.) in a wide range of field strength for three different initial electron momenta (2, 3, and 4 a.u.). But for strong screening case (κ = 0.3 a.u.), the heating rates predicted by the two approximations do not differ much after reaching their maximum values. Furthermore, the individual contribution of photoemission and photoabsorption processes to heating rate is analysed for both the weak and strong screening cases. We find that the single photoemission and photoabsorption rates are the same throughout the field strength while the multiphoton absorption process dominates over the multiphoton emission process beyond the field strength ≈ 4×10{sup 8} V/cm. The present study of the dependence of heating rate on the screening parameter ranging from 0.01 to 20 shows that whereas the heating rate predicted by the EA is greater than the FBA up to the screening parameter κ = 0.3 a.u., the two approximation methods yield results which are nearly identical beyond the above value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Servo calorimeter measures material heating rate

Servo calorimeter accurately measures the heating rate of a material exposed to nuclear radiation independently of the specific heat thermal conductivity of the material. The electrical power used is a direct measure of the nuclear heating rate.

Gilmour, G.↗

A simplified method for calculating the atmospheric heating rate by absorption of solar radiation in the stratosphere and mesosphere

Calculations of the atmospheric heating rate by absorption of solar radiation by O3, H2O, and CO2 are reported. The method needs only seven parameters for each molecule and is particularly useful for heating calculations in three-dimensional global circulation models below 80 km. Applying the formula to the observed distributions of O3, H2O, and CO2 produces reasonable latitudinal and seasonal variations in the heating rate. The calculated heating rate, however, is sensitive to the global distributions of the absorbing gases, and uncertainties in the O3 distribution above approximately 50 km and the H2O distribution below approximately 20 km may seriously affect the global distributions of the heating rate in these regions.

Shimazaki, T.↗

AVERAGE HEATING RATE OF HOT ATMOSPHERES IN DISTANT CLUSTERS BY RADIO ACTIVE GALACTIC NUCLEUS: EVIDENCE FOR CONTINUOUS ACTIVE GALACTIC NUCLEUS HEATING

We examine atmospheric heating by radio active galactic nuclei (AGNs) in distant X-ray clusters by cross correlating clusters selected from the 400 Square Degree (400SD) X-ray Cluster survey with radio sources in the NRAO VLA Sky Survey. Roughly 30% of the clusters show radio emission above a flux threshold of 3 mJy within a projected radius of 250 kpc. The radio emission is presumably associated with the brightest cluster galaxy. The mechanical jet power for each radio source was determined using scaling relations between radio power and cavity (mechanical) power determined for nearby clusters, groups, and galaxies with hot atmospheres containing X-ray cavities. The average jet power of central radio AGNs is approximately 2 x 10{sup 44} erg s{sup -1}. We find no significant correlation between radio power, and hence mechanical jet power, and the X-ray luminosities of clusters in the redshift range 0.1-0.6. This implies that the mechanical heating rate per particle is higher in lower mass, lower X-ray luminosity clusters. The jet power averaged over the sample corresponds to an atmospheric heating of approximately 0.2 keV per particle within R{sub 500}. Assuming the current AGN heating rate does not evolve but remains constant to redshifts of 2, the heating rate per particle would rise by a factor of two. We find that the energy injected from radio AGNs contribute substantially to the excess entropy in hot atmospheres needed to break self-similarity in cluster scaling relations. The detection frequency of radio AGNs is inconsistent with the presence of strong cooling flows in 400SD clusters, but does not exclude weak cooling flows. It is unclear whether central AGNs in 400SD clusters are maintained by feedback at the base of a cooling flow. Atmospheric heating by radio AGNs may retard the development of strong cooling flows at early epochs.

79 ASTRONOMY AND ASTROPHYSICS↗

Directly Measured Heating Rates of a Tropical Subvisible Cirrus Cloud

We present the first direct measurements of the infrared and solar heating rates of a tropical subvisible cirrus (SVC) cloud sampled off the east coast of Nicaragua on 25 July 2007 by the NASA ER-2 aircraft during the Tropical Composition, Cloud and Climate Coupling Experiment (TC4). On this day a persistent thin cirrus layer, with mostly clear skies underneath, was detected in real time by the cloud lidar on the ER-2, and the aircraft was directed to profile down through the SVC. Measurements of the net broadband infrared irradiance and spectrally integrated solar irradiance above, below, and through the SVC are used to determine the infrared and solar heating rates of the cloud. The lidar measurements show that the variable SVC layer was located between approximately 13 and 15 km. Its midvisible optical depth varied from 0.01 to 0.10 with a mean of 0.034 +/- 0.033. Its depolarization ratio was approximately 0.4, indicative of ice clouds. From the divergence of the measured net irradiances the infrared heating rate of the SVC was determined to be approximately 2.50 - 3.24 K/d and the solar heating rate was found to be negligible. These values are consistent with previous indirect observations of other SVC and with model-generated heating rates of SVC with similar optical depths. This study illustrates the utility and potential of the profiling sampling strategy employed here. A more fully instrumented high-altitude aircraft that also included in situ cloud and aerosol probes would provide a comprehensive data set for characterizing both the radiative and microphysical properties of these ubiquitous tropical clouds

Bucholtz, Anthongy↗

r-PROCESS LANTHANIDE PRODUCTION AND HEATING RATES IN KILONOVAE

r-process nucleosynthesis in material ejected during neutron star mergers may lead to radioactively powered transients called kilonovae. The timescale and peak luminosity of these transients depend on the composition of the ejecta, which determines the local heating rate from nuclear decays and the opacity. Kasen et al. and Tanaka and Hotokezaka pointed out that lanthanides can drastically increase the opacity in these outflows. We use the new general-purpose nuclear reaction network SkyNet to carry out a parameter study of r-process nucleosynthesis for a range of initial electron fractions Y{sub e}, initial specific entropies s, and expansion timescales τ. We find that the ejecta is lanthanide-free for Y{sub e} ≳ 0.22−0.30, depending on s and τ. The heating rate is insensitive to s and τ, but certain, larger values of Y{sub e} lead to reduced heating rates, due to individual nuclides dominating the heating. We calculate approximate light curves with a simplified gray radiative transport scheme. The light curves peak at about a day (week) in the lanthanide-free (-rich) cases. The heating rate does not change much as the ejecta becomes lanthanide-free with increasing Y{sub e}, but the light-curve peak becomes about an order of magnitude brighter because it peaks much earlier when the heating rate is larger. We also provide parametric fits for the heating rates between 0.1 and 100 days, and we provide a simple fit in Y{sub e}, s, and τ to estimate whether or not the ejecta is lanthanide-rich.

79 ASTRONOMY AND ASTROPHYSICS↗

Molecular dynamics study on the effect of boundary heating rate on the phase change characteristics of thin film liquid

In this study, theoretical investigation of thin film liquid phase change phenomena under different boundary heating rates has been conducted with the help of molecular dynamics simulation. To do this, the case of argon boiling over a platinum surface has been considered. The study has been conducted to get a better understanding of the nano-scale physics of evaporation/boiling for a three phase system with particular emphasis on the effect of boundary heating rate. The simulation domain consisted of liquid and vapor argon atoms placed over a platinum wall. Initially the whole system was brought to an equilibrium state at 90 K with the help of equilibrium molecular dynamics and then the temperature of the bottom wall was increased to a higher temperature (250 K/130 K) over a finite heating period. Depending on the heating period, the boundary heating rate has been varied in the range of 1600×10{sup 9} K/s to 8×10{sup 9} K/s. The variations of argon region temperature, pressure, net evaporation number with respect to time under different boundary heating rates have been determined and discussed. The heat fluxes normal to platinum wall for different cases were also calculated and compared with theoretical upper limit of maximum possible heat transfer to elucidate the effect of boundary heating rate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A time Fourier analysis of zonal averaged ozone heating rates

A time-Fourier analysis is presented for the yearly variation of the zonal averaged ozone heating rates in the middle atmosphere based on a model study. The ozone heating rates are determined by utilizing two-dimensional ozone distributions, the altitude and latitude, and by including the effect of the curved earth's atmosphere. In addition, assumptions are introduced to the yearly variations of the ozone distributions due to the lack of sufficient existing ozone data. Among other results, it is shown that the first harmonic component indicates that the heating rates are completely out of phase between the northern and southern hemispheres. The second Fourier component shows a symmetric pattern with respect to the equator, as well as five distinct local extreme values of the ozone heating rate. The third harmonic component shows a pattern close to that of the first component except in the regions above 70 deg between 45-95 km in both hemispheres.

Wang, P.-H.↗

Effects of surface pressures and streamline metrics on the calculation of laminar heating rates

The effect of streamline geometry and pressure distributions on surface heating rates is examined for slender, spherically blunted cones. The modifications to the approximate aeroheating code include a curve fit of pressures computed by an Euler solution over a range of Mach numbers and cone angles. The streamline geometry is then found using the surface pressures and inviscid surface properties. Previously, streamlines were determined using the inviscid properties at the edge of the boundary layer when accounting for the effects of entropy-layer swallowing. Streamline calculations are now based on inviscid surface conditions rather than boundary-layer edge properties. However, the heating rates are calculated using inviscid properties at the edge of the boundary layer. Resulting heating rates compare favorably with solutions from the viscous-shock-layer equations.

Riley, Christopher J.↗

Interplay Between Crustal‐Scale Thrusting, High Metamorphic Heating Rates, and the Development of Inverted Thermal‐Metamorphic Gradients: Numerical Models and Examples From the Caledonides of Northern Scotland

Abstract Understanding the processes that produce high prograde metamorphic heating rates and the development of inverted metamorphic sequences in collisional thrust belts remains a fundamental challenge for tectonics and metamorphic petrology. New 2D finite element models of crustal‐scale thrusts with variable slip rates (10, 20, 35, 50 km Myr −1 ) are used to examine how thrust sheet emplacement contributes to these processes. In the models, average prograde heating rates of 31–118 °C Myr −1 are observed in the footwall, with maximum transient heating rates of ∼167 °C Myr −1 occurring at the highest slip rate. Also, thrust sheet emplacement produces an inverted thermal gradient in the model footwall. At slip rates of 10 km Myr −1 , heating magnitudes >200 °C are observed >7 km structurally beneath the thrust plane. At slip rates of 20–50 km Myr −1 , models produce thermal penetration depths of 4–5 km for similar heating magnitudes. Petrologically determined heating rates for thrust footwalls in the Scandian orogenic wedge of northern Scotland mostly yield rates consistent with model results (10–230 °C Myr −1 ). The model‐derived magnitude of inverted thermal gradients is also similar to those indicated in texturally determined deformation temperature transects across the Scandian orogenic wedge (100 °C–180 °C). Combined, these results indicate that high heating rates can be produced by fault slip at typical plate velocities. Additionally, this implies that crustal‐scale thrusts are likely to produce inverted metamorphic sequences in most systems, provided that P‐T conditions during slip allow for metamorphic or recrystallization processes that would preserve evidence for such features.

Thigpen, J. Ryan↗

Effect of Heating Rate during Continuous Annealing on Microstructure and Mechanical Properties of High-Strength Dual-Phase Steel

The study concerns the influence of heating rate during continuous annealing on microstructure and mechanical properties of high-strength ferrite–martensite dual-phase (DP) steel. The study suggests that the superheat (ΔT), carbon diffusion and distribution were strongly influenced by increasing the heating rate, leading to different microstructure and mechanical properties of DP steel. The morphology of martensite was observed to shift from network along ferrite grain boundaries to banded structure to uniformly dispersed, and the average ferrite grain size was refined from 5.3 to 2.0 µm. When the heating rate was 300 °C/s, the steel exhibited excellent mechanical properties with tensile strength (UTS) of 982 MPa, total elongation (TEL) of 17.5%, strength–elongation balance (UTS × TEL) of 17.2 GPa%, because of finer microstructure, uniform martensite distribution and low carbon content of martensite. Moreover, the precipitation strengthening effect of NbC is an important reason for the high-strength DP steels. In addition, the variation in strain-hardening behavior and fracture mechanism of steel subjected to different heating rates is discussed in relation to the microstructure.

36 MATERIALS SCIENCE↗

Analysis of read-out heating rate effects on the glow peaks of TLD-100 using WinGCF software

This study was done to analyze the effects of the read-out heating rate on the LiF:Mg,Ti (TLD-100) thermoluminescent dosimeters (TLD) glow peaks using WinGCF computer software. The TLDs were exposed to X-ray photons with a potential difference of 72 kVp and 200 mAs in air and were read-out using a Harshaw 3500 TLD reader. The TLDs were read-out using four read-out heating rates at 10, 7, 4 and 1 °C s{sup −1}. It was observed that lowering the heating rate could separate more glow peaks. The activation energy for peak 5 was found to be lower than that for peak 4. The peak maximum temperature and the integral value of the main peak decreased as the heating rate decreases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of heating rate on density, microstructure, and strength of Si3N4-6 wt.% Y2O3 and a beta-prime sialon

The effects of the heating rate during sintering/firing on the final density, microstructure, and strength of Si3N4-6 wt% Y2O3 and beta-prime sialon, sintered for four hours at 1750 C, are examined. In Si3N4-6 wt% Y2O3 increasing the heating rate from 7 C/min to 25 C/min to 90 C/min results in a corresponding decrease in the final density from 3.01 g/cu cm to 2.92 g/cu cm to 2.76 g/cu cm. In the beta-prime sialon composition all three heating rates produce an equivalent final density of 3.13 g/cu cm. All heating rates in both compositions produce nonhomogeneous microstructures. The room-temperature strength of Si3N4-6 wt% Y2O3 increases from 372 to 510 MPa with increased density, while the corresponding strengths for the betaprime sialon at equivalent densities are 345 to 445 MPa.

Campbell, S. S.↗

Heating rates in tropical anvils

The interaction of infrared and solar radiation with tropical cirrus anvils is addressed. Optical properties of the anvils are inferred from satellite observations and from high-altitude aircraft measurements. An infrared multiple-scattering model is used to compute heating rates in tropical anvils. Layer-average heating rates in 2 km thick anvils were found to be on the order of 20 to 30 K/day. The difference between heating rates at cloud bottom and cloud top ranges from 30 to 200 K/day, leading to convective instability in the anvil. The calculations are most sensitive to the assumed ice water content, but also are affected by the vertical distribution of ice water content and by the anvil thickness. Solar heating in anvils is shown to be less important than infrared heating but not negligible. The dynamical implications of the computed heating rates are also explored and it is concluded that the heating may have important consequences for upward mass transport in the tropics. The potential impact of tropical cirrus on the tropical energy balance and cloud forcing are discussed.

Ackerman, Thomas P.↗

Melting processes of oligomeric α and β isotactic polypropylene crystals at ultrafast heating rates

The melting behaviors of α (stable) and β (metastable) isotactic polypropylene (iPP) crystals at ultrafast heating rates are simulated with atomistic molecular dynamics method. Quantitative information about the melting processes of α- and β-iPP crystals at atomistic level is achieved. The result shows that the melting process starts from the interfaces of lamellar crystal through random dislocation of iPP chains along the perpendicular direction of lamellar crystal structure. In the melting process, the lamellar crystal gradually expands but the corresponding thickness decreases. The analysis shows that the system expansion lags behind the crystallinity decreasing and the lagging extents for α- and β-iPP are significantly different. The apparent melting points of α- and β-iPP crystals rise with the increase of the heating rate and lamellar crystal thickness. The apparent melting point of α-iPP crystal is always higher than that of β-iPP at differently heating rates. Applying the Gibbs-Thomson rule and the scaling property of the melting kinetics, the equilibrium melting points of perfect α- and β-iPP crystals are finally predicted and it shows a good agreement with experimental result.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SISGR - In situ characterization and modeling of formation reactions under extreme heating rates in nanostructured multilayer foils

Materials subjected to extreme conditions, such as very rapid heating, behave differently than materials under more ordinary conditions. In this program we examined the effect of rapid heating on solid-state chemical reactions in metallic materials. One primary goal was to develop experimental techniques capable of observing these reactions, which can occur at heating rates in excess of one million degrees Celsius per second. One approach that we used is x-ray diffraction performed using microfocused x-ray beams and very fast x-ray detectors. A second approach is the use of a pulsed electron source for dynamic transmission electron microscopy. With these techniques we were able to observe how the heating rate affects the chemical reaction, from which we were able to discern general principles about how these reactions proceed. A second thrust of this program was to develop computational tools to help us understand and predict the reactions. From atomic-scale simulations were learned about the interdiffusion between different metals at high heating rates, and about how new crystalline phases form. A second class of computational models allow us to predict the shape of the reaction front that occurs in these materials, and to connect our understanding of interdiffusion from the atomistic simulations to measurements made in the laboratory. Both the experimental and computational techniques developed in this program are expected to be broadly applicable to a wider range of scientific problems than the intermetallic solid-state reactions studied here. For example, we have already begun using the x-ray techniques to study how materials respond to mechanical deformation at very high rates.

36 MATERIALS SCIENCE↗