Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Global climate models (GCMs)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effects of Improved Simulation of Precipitation on Evapotranspiration and Its Partitioning Over Land

Evapotranspiration (ET) is a key component of the global hydrological cycle, which is strongly modulated by the occurrence of different rainfall intensities. Global climate models (GCMs) commonly suffer from “too much light rain” and a negative bias in the ratio of transpiration (T) to ET (T/ET). It is unclear whether these biases are related. Here, in this work, we show that with the improved simulation of probability density functions of rainfall intensity by suppressing light-rain occurrence using a stochastic convection parameterization in the NCAR CESM1.2, the canopy T increases in tropical forests while evaporation from canopy interception and bare soil decreases. The simulated T/ET is increased by 2.5% globally and up to 8% regionally, primarily attributable to reduced fraction of wet leaves due to less frequent light rain despite its weak intensity. These results imply that excessive light rain is an important cause of the negative T/ET bias in GCMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Improved Dust Representation and Impacts on Dust Transport and Radiative Effect in CAM5

Dust transport and spatial distribution are poorly represented in current global climate models (GCMs) including the Community Atmosphere Model version 5 (CAM5). Particularly, models lack explicit representation of super-coarse dust, which may have important implications for dust radiative forcing and impacts on biogeochemistry. A nine-mode version of the modal aerosol model (MAM9) has been developed to address these issues. In this new aerosol scheme, four dust modes have been designed to treat dust particles of sizes up to 20 μm. The MAM9-simulated results are compared with those from the default four-mode version of MAM (MAM4) and also with the in situ surface measurements of dust concentration and deposition flux, satellite-retrieved dust extinction profile, and in situ vertical measurements of dust concentrations from the NASA Atmosphere Tomography Mission (ATom). Overall, MAM9 improves the dust representation in remote regions while maintaining reasonably good results near the dust source regions. In addition, MAM9 reduces the fine dust burden and increases the coarse dust burden globally. The increased coarse dust burden has slightly increased the dust direct radiative effect by 0.01 W m –2 while it enhanced dust indirect radiative effect by 0.36 W m –2 , globally.

58 GEOSCIENCES↗
DOE OSTI2023

An Ensemble of Neural Networks for Moist Physics Processes, Its Generalizability and Stable Integration

Abstract With the recent advances in data science, machine learning has been increasingly applied to convection and cloud parameterizations in global climate models (GCMs). This study extends the work of Han et al. (2020, https://doi.org/10.1029/2020MS002076 ) and uses an ensemble of 32‐layer deep convolutional residual neural networks, referred to as ResCu‐en, to emulate convection and cloud processes simulated by a superparameterized GCM, SPCAM. ResCu‐en predicts GCM grid‐scale temperature and moisture tendencies, and cloud liquid and ice water contents from moist physics processes. The surface rainfall is derived from the column‐integrated moisture tendency. The prediction uncertainty inherent in deep learning algorithms in emulating the moist physics is reduced by ensemble averaging. Results in 1‐year independent offline validation show that ResCu‐en has high prediction accuracy for all output variables, both in the current climate and in a warmer climate with +4K sea surface temperature. The analysis of different neural net configurations shows that the success to generalize in a warmer climate is attributed to convective memory and the 1‐dimensional convolution layers incorporated into ResCu‐en. We further implement a member of ResCu‐en into CAM5 with real world geography and run the neural‐network‐enabled CAM5 (NCAM) for 5 years without encountering any numerical integration instability. The simulation generally captures the global distribution of the mean precipitation, with a better simulation of precipitation intensity and diurnal cycle. However, there are large biases in temperature and moisture in high latitudes. These results highlight the importance of convective memory and demonstrate the potential for machine learning to enhance climate modeling.

Meteorology & Atmospheric Sciences↗
DOE OSTI2024

Improving BC Mixing State and CCN Activity Representation With Machine Learning in the Community Atmosphere Model Version 6 (CAM6)

Abstract Representing mixing state of black carbon (BC) is challenging for global climate models (GCMs). The Community Atmosphere Model version 6 (CAM6) with the four‐mode version of the Modal Aerosol Module (MAM4) represents aerosols as fully internal mixtures with uniform composition within each aerosol mode, resulting in high degree of internal mixing of BC with non‐BC species and large mass ratio of coating to BC ( R BC , the mass ratio of non‐BC species to BC in BC‐containing particles). To improve BC mixing state representation, we coupled a machine learning (ML) model of BC mixing state index trained on particle‐resolved simulations to the CAM6 with MAM4 (MAM4‐ML). In MAM4‐ML, we use R BC to partition accumulation mode particles into two new modes, BC‐free particles and BC‐containing particles. We adjust R BC to make the modeled BC mixing state index ( χ mode ) match the one predicted by the ML model ( χ ML ). On a global average, the mass fraction of BC‐containing particles in accumulation mode decreases from 100% (MAM4‐default) to 48% (MAM4‐ML). The globally averaged χ mode decreases from 78% (MAM4‐default) to 63% (MAM4‐ML, 19% reduction) and agrees well with χ ML (66%). The R BC decreases by 52% for accumulation mode and better agrees with observations. The hygroscopicity drops by 9% for BC‐containing particles in accumulation mode, leading to a 20% reduction in the BC activation fraction. The surface BC concentration increases most (6.9%) in the Arctic, and the BC burden increases by 4%, globally. Our study highlights the application of the ML model for improving key aerosol processes in GCMs.

Meteorology & Atmospheric Sciences↗
DOE OSTI2023

The Role of In-Cloud Wet Removal in Simulating Aerosol Vertical Profiles and Cloud Radiative Forcing

Among the physical processes controlling aerosol vertical profiles, in-cloud wet removal is of utmost importance while its representation in global climate models (GCMs) is crude. In this study, we implement into the Community Atmosphere Model version 6 (CAM6) a physically based aerosol wet removal parameterization scheme that explicitly treats aerosol activation, removal and resuspension. Evaluation against in-situ observations shows that the default scheme substantially overestimates the upper tropospheric black carbon (BC) and sea salt mass. Our physically based scheme reduces BC and sea salt mass by a factor of 10 and 1,000, respectively, in better agreement with observations. Also, the new scheme slightly increases number of aerosol particles between 12 nm and 4.8 μm in diameter, thereby mitigating the aerosol number underestimation in the default scheme. Our new scheme reduces the overestimation of coarse-mode aerosol (0.5–4.8 μm) number. Overall, the aerosol property changes (mass decrease and number increase) reduce the cloud condensation nuclei (CCN) concentration at low supersaturation (i.e., 0.02% and 0.1%), and increase CCN at high supersaturations (i.e., 0.5% and 1%). Consequently, the global annual mean cloud liquid water path increases by 1.89 g m -2 and the ice water path increases by 0.51 g m -2 . The global annual mean shortwave, longwave, and net cloud radiative forcing change by -1.06, 0.57, and -0.48 W m -2 , respectively. Further improvement is needed to reflect the real physics that the removal efficiencies for aerosol mass and number are disproportionate and to advect cloud-borne (activated) aerosols for a complete aerosol lifecycle.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Future Climate Projections for South Florida: Improving the Accuracy of Air Temperature and Precipitation Extremes With a Hybrid Statistical Bias Correction Technique

Projecting future climate variables is essential for comprehending the potential impacts on hydroclimatic hazards like floods and droughts. Evaluating these impacts is challenging due to the coarse spatial resolution of global climate models (GCMs); therefore, bias correction is widely used. Here, we applied two statistical methods—standard empirical quantile mapping (EQM) and a hybrid approach, EQM with linear correction (EQM-LIN)—to bias correct precipitation and air temperature simulated by nine GCMs. We used historical observations from 20 weather stations across South Florida to project future climate under three shared socioeconomic pathways (SSPs). Compared to the EQM, the hybrid EQM-LIN method improved R 2 of daily quantiles by up to 30% over the historical period and improved MAE up to 70% in months that contain most extreme values. Projected extreme precipitation at the weather stations showed that, compared to the EQM-LIN, the EQM method underestimates the high quantiles by up to 26% in SSP585. The projected changes in annual maximum precipitation from historical period (1985–2014) to near future (2040–2069) and far future (2070–2100) were between 2% and 16% across the study area. Projected future precipitation suggested a slight decrease during summer but an increase in fall. This, along with rising summer temperatures, suggested that South Florida can experience rapid oscillations from warmer summers and increased flooding in fall under future climate. Additionally, our comparative analyses with globally and nationally downscaled studies showed that such coarse scale studies do not represent the climatic extremes well, particularly for high quantile precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Evaluation of Global Climate Models for Use in Energy Analysis

The interplay between energy, climate, and weather is becoming more complex due to increasing contributions of renewable energy generation, energy storage, electrified end uses, and the increasing frequency of extreme weather events. Energy system analyses commonly rely on meteorological inputs to estimate renewable energy generation and energy demand; however, these inputs rarely represent the estimated impacts of future climate change. Climate models and publicly available climate change datasets can be used for this purpose, but the selection of inputs from the myriad of available models and datasets is a nuanced and subjective process. In this work, we assess datasets from various global climate models (GCMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6). We present evaluations of their skills with respect to the historical climate and comparisons of their future projections of climate change for two climate change scenarios. We present the results for different climatic and energy system regions and include interactive figures in the accompanying software repository. Previous work has presented similar GCM evaluations, but none have presented variables and metrics specifically intended for comprehensive energy systems analysis including impacts on energy demand, thermal cooling, hydropower, water availability, solar energy generation, and wind energy generation. We focus on GCM output meteorological variables that directly affect these energy system components including the representation of extreme values that can drive grid resilience events. The objective of this work is not to recommend the best climate model and dataset for a given analysis, but instead to provide a reference to facilitate the selection of climate models and scenarios in subsequent work.

14 SOLAR ENERGY↗
DOE OSTI2022

Impacts of Suppressing Excessive Light Rain on Aerosol Radiative Effects and Health Risks

Global climate models (GCMs) have been used widely to study radiative forcing and health risks of aerosols. A recent study using two GCMs found that light rain plays a dominant role in controlling aerosol loading. However, “too much light rain and too little heavy rain” is a longstanding bias in GCMs. It is unclear how much light rain affects aerosol-cloud-radiation interactions and health risks from air pollution. Here, in this work, we show that, with the correction of the rainfall intensity spectrum in the National Center for Atmospheric Research Community Atmosphere Model version 5.3 by introducing a stochastic deep convection scheme, the reduced frequency of light rain (1–20 mm d -1 ) results in changes of aerosol direct radiative effects (DRE) of up to -0.5 ± 0.03 W/m 2 and aerosol cloud radiative effects (CRE) of up to -0.9 ± 0.03 W/m 2 . The total (CRE + DRE) radiative effects of light rain-mediated aerosol changes exceed the present-day anthropogenic forcing of aerosols relative to preindustrial levels from the Coupled Model Intercomparison Project (CMIP5&6) models. However, the correction of the rainfall intensity spectrum has little effect on anthropogenic aerosol forcing (defined as the radiative perturbation due to changes in aerosol concentrations between the industrial era and preindustrial levels). Due to increased exposure to fine particulates (PM 2.5 ), the estimated global total premature mortality is much higher than previously estimated, by 300,000 ± 60,000 deaths per year, and is more severe in populous regions such as India and China. The findings in this study highlight the need to understand uncertainties in radiative effects and health risks of aerosols due to simulation biases of precipitation in GCMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Climate hazard indices projections based on CORDEX-CORE, CMIP5 and CMIP6 ensemble

The CORDEX-CORE initiative was developed with the aim of producing homogeneous regional climate model (RCM) projections over domains world wide. In its first phase, two RCMs were run at 0.22° resolution downscaling 3 global climate models (GCMs) from the CMIP5 program for 9 CORDEX domains and two climate scenarios, the RCP2.6 and RCP8.5. The CORDEX-CORE simulations along with the CMIP5 GCM ensemble and the most recently produced CMIP6 GCM ensemble are analyzed, with focus on several temperature, heat, wet and dry hazard indicators for present day and mid-century and far future time slices. The CORDEX-CORE ensemble shows a better performance than the driving GCMs for several hazard indices due to its higher spatial resolution. For the far future time slice the 3 ensembles project an increase in all temperature and heat indices analyzed under the RCP8.5 scenario. The largest increases are always shown by the CMIP6 ensemble, except for Tx > 35 °C, for which the CORDEX-CORE projects higher warming. Extreme wet and flood prone maxima are projected to increase by the RCM ensemble over the la Plata basin in South America, the Congo basin in Africa, east North America, north east Europe, India and Indochina, regions where a better performance is obtained, whereas the GCM ensembles show small or negligible signals. Furthermore, compound hazard hotspots based on heat, drought and wet indicators are detected in each continent worldwide in region like Central America, the Amazon, the Mediterranean, South Africa and Australia, where a linear relation is shown between the heatwave and drought change signal, and region like Arabian peninsula, the central and south east Africa region (SEAF), the north west America (NWN), south east Asia, India, China and central and northern European regions (WCE, NEU) where the same linear relation is found for extreme precipitation and HW increases. Although still limited, the CORDEX-CORE initiative was able to produce high resolution climate projections with almost global coverage and can provide an important resource for impact assessment and climate service activities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Hydrological analysis in watersheds with a variable-resolution global climate model (VR-CESM)

Traditionally, watershed-scale hydrology is simulated by distributed hydrological models with offline meteorological forcing data, or by regional regional climate models that link atmospheric and land hydrology interactions. Global climate models (GCMs) are rarely used to study watershed-scale hydrology due to the relatively coarse grid resolution, computationally expensive downscaling, and simplified physical processes. Recently, however, watershed-scale hydrology analysis has become possible in GCMs due to the development of variable-resolution GCMs that dynamically couple the hydrological processes between atmosphere and land systems at fine resolutions in selected regions and coarse resolution elsewhere. In this study, we used the variable-resolution Community Earth System Model (VR-CESM) with refined-resolution (14 km) in the western U.S. and eastern China to evaluate watershed-scale hydrology. Furthermore, we compared the historical VR-CESM outputs with gauge measurements and other hydrological models (e.g., National Water Model in the U.S.) and calibrated the subsurface runoff capacities in four mountainous watersheds. An RCP8.5 projection from 2007 to 2050 is used to estimate the impact of changing precipitation and snow climatology on watershed hydrology. We also analyzed the long-term runoff variability and the possibility of extreme runoff events as simulated by the VR-CESM. Although calibration is not possible in larger-scale watersheds, VR-CESM simulates the long-term annual variability of watersheds and provides insights on climate change impacts on hydrology. We conclude that refined-resolution VR-CESM can be used for watershed-scale hydrology analysis to understand water resources and water balance, in addition to traditional watershed-scale hydrological models. It enables hydrological analysis at multiple watersheds in one simulation and can help understand the two-way dynamics between land surface hydrology and atmospheric processes, and is especially practical for projecting climate change impacts. However, it is challenging to apply VR-CESM for hydrologic analysis in regulated watersheds as human factors (e.g., pumping, irrigation, water diversion) have not been fully addressed in VR-CESM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Assessment of CMIP6 Performance and Projected Temperature and Precipitation Changes Over South America

We evaluate the performance of a large ensemble of Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6) over South America for a recent past reference period and examine their projections of twenty-first century precipitation and temperature changes. The future changes are computed for two time slices (2040–2059 and 2080–2099) relative to the reference period (1995–2014) under four Shared Socioeconomic Pathways (SSPs, SSP1–2.6, SSP2–4.5, SSP3–7.0 and SSP5–8.5). The CMIP6 GCMs successfully capture the main climate characteristics across South America. However, they exhibit varying skill in the spatiotemporal distribution of precipitation and temperature at the sub-regional scale, particularly over high latitudes and altitudes. Future precipitation exhibits a decrease over the east of the northern Andes in tropical South America and the southern Andes in Chile and Amazonia, and an increase over southeastern South America and the northern Andes—a result generally consistent with earlier CMIP (3 and 5) projections. However, most of these changes remain within the range of variability of the reference period. In contrast, temperature increases are robust in terms of magnitude even under the SSP1–2.6. Future changes mostly progress monotonically from the weakest to the strongest forcing scenario, and from the mid-century to late-century projection period. There is an increase in the seasonality of the intra-annual precipitation distribution, as the wetter part of the year contributes relatively more to the annual total. Furthermore, an increasingly heavy-tailed precipitation distribution and a rightward shifted temperature distribution provide strong indications of a more intense hydrological cycle as greenhouse gas emissions increase. The relative distance of an individual GCM from the ensemble mean does not substantially vary across different scenarios. We found no clear systematic linkage between model spread about the mean in the reference period and the magnitude of simulated sub-regional climate change in the future period. Overall, these results could be useful for regional climate change impact assessments across South America.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Ventenata dubia projected to expand in the western United States despite future novel conditions

Abstract Distributions of both native and invasive species are expected to shift under future climate. Species distribution models (SDMs) are often used to explore future habitats, but sources of uncertainty including novel climate conditions may reduce the reliability of future projections. We explore the potential spread of the invasive annual grass ventenata ( Ventenata dubia ) in the western United States under both current and future climate scenarios using boosted regression tree models and 30 global climate models (GCMs). We quantify novel climate conditions, prediction variability arising from both the SDMs and GCMs, and the agreement among GCMs. Results demonstrate that currently suitable habitat is concentrated inside the invaded range of the northwest, but substantial habitat exists outside the invaded range in the Southern Rockies and southwestern US mountains. Future suitability projections vary greatly among GCMs, but GCMs commonly projected decreased suitability in the invaded range and increased suitability along higher elevations of interior mountainous areas. Climate novelty did not appear to undermine the prediction reliability in many cases where the climate–species relationship was fully represented by the occurrence data. GCM‐derived variability resulting from variation in future cool season precipitation and temperature seasonality was greatest in the Rocky Mountains. SDM‐derived variability was higher in currently suitable habitat, and few GCMs projections agreed that these areas would contain future suitable habitat. However, while prediction variability was high, many GCM projections agreed that parts of the Rocky, Wasatch, and Uinta Mountains would contain highly suitable habitat in the future. As disturbances in the interior mountains occur in coming decades, reducing some natural barriers to invasion, land managers, and conservationists will need to monitor for ventenata in post‐disturbance environments. Changes to invasion potential may not play out for several decades, but results related to current potential may have applications for early detection and rapid response planning.

Environmental Sciences & Ecology↗
DOE OSTI2021

The impact of coupled air–sea interaction on extreme East Asian summer monsoon simulation in CMIP5 models

Abstract In this study, the relationship between the ability to simulate air–sea interactions over the western North Pacific (WNP), and to reproduce the extreme East Asian summer monsoon (EASM), were investigated by comparing the performances of several global climate models (GCMs). High ranked in air–sea interaction simulation (HRA) and low ranked in air–sea interaction simulation (LRA) models were selected, according to their performance in simulating relations between sea surface temperature (SST) and precipitation over the WNP, from the ensemble of models that participated in the third and fifth phases of the Coupled Model Intercomparison Project (CMIP3, CMIP5). Compared with CMIP3 models, CMIP5 models exhibited improved simulations of the distinctive air–sea interaction over the WNP, namely, the strong atmospheric forcing on the ocean. Among CMIP5 models, HRA models, which reproduced intrinsic negative correlations between precipitation and SST over the WNP, could simulate the extreme EASM better than LRA models. In particular, HRA models generated a more realistic spatial distribution of the extreme EASM compared with LRA models. The defects of the LRA models resulted from distorted synoptic fields, including underestimated geopotential height and overestimated low‐level wind over the WNP, inducing unrealistic moisture supply and convection due to the exaggerated SST forcing. In contrast, reasonable air–sea interactions represented in HRA models lead to realistic synoptic fields over the WNP, and proper simulation of the extreme EASM.

Kim, Taehyung↗
DOE OSTI2020

Regional climate change projections from NA-CORDEX and their relation to climate sensitivity

Abstract The climate sensitivity of global climate models (GCMs) strongly influences projected climate change due to increased atmospheric carbon dioxide. Reasonably, the climate sensitivity of a GCM may be expected to affect dynamically downscaled projections. However, there has been little examination of the effect of the climate sensitivity of GCMs on regional climate model (RCM) ensembles. Therefore, we present projections of temperature and precipitation from the ensemble of projections produced as a part of the North American branch of the international Coordinated Regional Downscaling Experiment (NA-CORDEX) in the context of their relationship to the climate sensitivity of their parent GCMs. NA-CORDEX simulations were produced at 50-km and 25-km resolutions with multiple RCMs which downscaled multiple GCMs that spanned nearly the full range of climate sensitivity available in the CMIP5 archive. We show that climate sensitivity is a very important source of spread in the NA-CORDEX ensemble, particularly for temperature. Temperature projections correlate with driving GCM climate sensitivity annually and seasonally across North America not only at a continental scale but also at a local-to-regional scale. Importantly, the spread in temperature projections would be reduced if only low, mid, or high climate sensitivity simulations were considered, or if only the ensemble mean were considered. Precipitation projections correlate with climate sensitivity, but only at a continental scale during the cold season, due to the increasing influence of other processes at finer scales. Additionally, it is shown that the RCMs do alter the projection space sampled by their driving GCMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Assessing concurrent effects of climate change on hydropower supply, electricity demand, and greenhouse gas emissions in the Upper Yangtze River Basin of China

Hydropower importantly provides flexible low-carbon electricity, however, climate change will affect the hydropower system through altering hydrologic regimes while also affecting electricity demands for heating and cooling that hydropower resources serve. This study assesses the effect of climate change on hydropower and electricity demand in the Upper Yangtze River Basin (UYRB) in China on the regional net electric load and greenhouse gas (GHG) emissions. This is accomplished by using climate projections from five global climate models (GCMs) to simultaneously force (1) a physically-based hydrological model and a statistically-based hydropower model to estimate the future generating capacity of 21 large hydropower plants in the UYRB and (2) an empirical electricity demand model accounting for socioeconomic and climatic factors. Under climate change, the projected hydropower generation in the UYRB tends to increase in the 21st century but is far less than the increase in electricity demand, increasing the gap between demand and supply. Future increases in overall electricity demand are driven by GDP growth, but climate change will alter the distribution of the seasonal electricity demand. Climate warming decreases electricity demand for heating in winter and increases electricity demand for cooling in summer, but ultimately increases demand. Meanwhile, there is an increasing mismatch between electricity demand and hydropower supply associated with inter- and intra-annual variations, owing to the temporal climate change and increase in compound climate extremes (droughts and heatwaves). Finally, meeting the gap between supply and demand due to climate change is estimated to contribute 79.0–184.6 and 50.6–316.2 MMT CO 2e /yr of additional GHG emissions by the mid and end of 21st century, respectively.

13 HYDRO ENERGY↗
DOE OSTI2022

Application-specific optimal model weighting of global climate models: A red tide example

Global climate models (GCMs) and Earth system models (ESMs) provide many climate services with environmental relevance. The High Resolution Model Inter-comparison Project (HighResMIP) of the Coupled Model Intercomparison Project Phase 6 (CMIP6) provides model runs of GCMs and ESMs to address regional phenomena. Developing a parsimonious ensemble of CMIP6 requires multiple ensemble methods such as independent-model subset selection, prescreening-based subset selection, and model weighting. The work presented here focuses on application-specific optimal model weighting, with prescreening-based subset selection. As such, independent ensemble members are categorized, selected, and weighted based on their ability to reproduce physically-interpretable features of interest that are problem-specific. We discuss the strengths and caveats of optimal model weighting using a case study of red tide prediction in the Gulf of Mexico along the West Florida Shelf. Red tide is a common name of specific harmful algal blooms that occur worldwide, causing adverse socioeconomic and environmental impacts. Our results indicate the importance of prescreening-based subset selection as optimal model weighting can underplay robust ensemble members by optimizing error cancellation. Prescreening-based subset selection also provides insights about the validity of the model weights. By illustrating the caveats of using non-representative models when optimal model weighting is used, the findings and discussion of this study are pertinent to many other climate services.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A new method to construct a horizontal resolution-dependent wind speed adjustment factor for tropical cyclones in global climate model simulations

A new method to construct a horizontal resolution-dependent wind speed adjustment factor for evaluating tropical cyclones (TCs) in global climate models (GCMs) is presented here. In contrast to the previous studies that used idealized axisymmetric wind fields, this study analyzes 48 hours of 10-second surface wind fields from 1-km TC simulations. The adjustment factor is derived from filtering the simulated TC wind fields onto various horizontal grid spacings typical of those used in GCMs. The new adjustment factor leads to TCs with greater intensity than the existing adjustment factors for horizontal grid spacings smaller than 30 km. This difference is attributed to more realistic wind fields in the TC simulations that contain highly asymmetric, localized patches of higher wind speeds instead of axisymmetric wind fields. Applying the new adjustment factor to select GCM simulations suggests the common interpretation of low-intensity bias in GCM-simulated TCs might be slightly exaggerated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Parameterizing Subgrid Variations of Land Surface Heat Fluxes to the Atmosphere Improves Boreal Summer Land Precipitation Simulation With the NCAR CESM1.2

Subgrid horizontal variations of land surface heat fluxes to the atmosphere resulting from subgrid land cover heterogeneity are important in land-atmosphere interaction in global climate models (GCMs). To incorporate it, a parameterization using stochastic sampling based on truncated normal distributions diagnosed from the land model and internal ensemble mean of multiple calls to the planetary boundary layer and deep convection schemes is developed. After its implementation in the National Center for Atmospheric Research (NCAR) Community Earth System Model version 1.2 (CESM1.2), large changes of simulated land precipitation are found to occur in regions where large subgrid variations of surface heat fluxes exist. The simulated precipitation is improved in boreal summer, especially over eastern China and the coastal areas of the Bay of Bengal. The improved precipitation is mainly a result of improved large-scale moisture convergence and advection by altered vertical diffusion and convection.

58 GEOSCIENCES↗