Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geospatial analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Geospatial Cluster Analysis of the State, Duration and Severity of Drought Over Paraíba State, Northeastern Brazil

Droughts threaten water resources, agriculture, socio-economic activities and the population at the global and regional level, so identifying areas with homogeneous drought behaviors is an important consideration in improving the management of water resources. The objective of this study is to identify homogenous zones over Paraíba State in relation to the state, duration and severity of droughts that have occurred over the last 20 years (1998–2017) using hierarchical cluster analysis based on both gauge-measured and Tropical Rainfall Measuring Mission (TRMM) estimated rainfall data (TMPA 3B42). The drought series were calculated using the Standardized Precipitation Index (SPI) based on eight time scales and were grouped according to drought state, duration and severity time series. The integrated results of state, duration and severity of droughts indicate that there is a basis for dividing Paraíba State into two major regions (a) Zone I, formed by Mata Paraibana and Agreste Paraibano, and (b) Zone II, composed by Borborema and Sertão Paraibano. This division is evident when assessing short-term droughts, but in the case of long-term droughts, Paraíba State has a high similarity in terms of drought state, duration, and severity. Factors such as proximity to the ocean, active climatic systems, and the local relief configuration were identified as influencing the drought regime. Finally, it is concluded that TMPA rainfall estimates represent a valuable source of data to regionalize and identify drought patterns over this part of Brazil and that other studies of this type should be carried out to monitor these phenomena based on other satellite-based rainfall data, including the Global Precipitation Mission (GPM).

SPI↗
DOE OSTI2025

PV Degradation Modeling: Applying Geospatial Workflows with "PVDeg"

Accurate degradation modeling is essential for predicting photovoltaic (PV) module performance, estimating longevity and informing design decisions. With degradation rates varying significantly by location, geospatial analysis is critical for PV and broader applications, such as agrivoltaics, weathering and environmental data analysis. This work presents PVDeg, an open-source tool designed for geospatial degradation analysis. PVDeg integrates meteorological data from global sources, including the National Solar Radiation Database (NSRDB) and Photovoltaic Geographical Information System (PVGIS), with degradation models. The toolkit enables users to customize geospatial workflows by integrating weather data, material parameters, and user-defined Python functions. It facilitates accelerated downloads of NSRDB and PVGIS datasets and optimizes geospatial point selection to preserve data density in regions of interest. Additionally, PVDeg provides a local database for storage and spatial queries, supporting large-scale analyses without the need for high-performance computing (HPC) resources. PVDeg provides a foundational workflow that extends its utility beyond PV applications, enabling researchers to analyze geospatial processes across discipline.

14 SOLAR ENERGY↗
DOE OSTI2025

Development and Preliminary Analysis of a U.S. Geothermal Heat Pump Installation Database

This paper seeks to addresses the significant gap in the literature regarding the installation and adoption of geothermal heat pump (GHP) systems in the United States. While the "2021 U.S. Geothermal Power Production and District Heating Market Report" published by the National Renewable Energy Laboratory (NREL) focused on direct-use geothermal district heating systems, it did not include an analysis of GHP installations (Robins et al. 2021). To bridge this gap, NREL has compiled a novel database currently containing 70,470 records of GHP installations, primarily sourced from state well permits and small-scale studies. Our methodology emphasizes the collection, cleaning, and standardization of data, addressing challenges such as inconsistent reporting formats and privacy concerns. Despite limitations in data on capacity, costs, and performance, our preliminary geospatial analysis reveals insights into the distribution of GHP systems across urban and rural areas and climate zones. The paper highlights the importance of publicly accessible data for advancing GHP technology adoption with a discussion of existing data sources and their limitations, advocating for improved collaboration between NREL and industry stakeholders.

data collection↗
DOE OSTI2023

Windthrow characteristics and their regional association with rainfall, soil, and surface elevation in the Amazon

Abstract Windthrows (trees uprooted and broken by winds) are common across the Amazon. They range in size from single trees to large gaps that lead to changes in forest dynamics, composition, structure, and carbon balance. Yet, the current understanding of the spatial variability of windthrows is limited. By integrating remote sensing data and geospatial analysis, we present the first study to examine the occurrence, area, and direction of windthrows and the control that environmental variables exert on them across the whole Amazon. Windthrows are more frequent and larger in the northwestern Amazon (Peru and Colombia), with the central Amazon (Brazil) being another hot spot of windthrows. The predominant direction of windthrows is westward. Rainfall, surface elevation, and soil characteristics explain the variability (20%–50%) of windthrows but their effects vary regionally. A better understanding of the spatial dynamics of windthrows will improve understanding of the functioning of Amazon forests.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

The INSTEP Monitoring Network: Merging High-and-Low Cost Measurements to Characterize California Wildfires

Despite challenges with data quality and scope, low-cost sensor networks have skyrocketed in popularity over the last 15 years, making air quality data available on refined spatial scales. More recently, studies have leveraged both high and low-quality instruments to create stronger “hybrid” models, with most studies focusing on particulate matter. Low-cost measurements typically represent ground-level emissions only, providing context for human health issues from climate change-driven events such as wildfires. Since low-cost sensors’ capabilities are localized, daily events and microclimates tend to dominate the data rather than larger regional or atmospheric trends. Likewise, their low cost explains their high uncertainty. In contrast, some regulatory-grade instruments produce column measurements as well, providing reliable information on a broader scope. To bridge this gap while expanding into gas-phase measurements, we deployed 12 air quality sensor packages in California, USA during the 2022 wildfire season. These INSTEP (Inexpensive Network Sensor Technology Exploring Pollution) monitors measure carbon monoxide (CO), carbon dioxide (CO2), ozone (O3), nitrogen dioxide (NO2), and several hydrocarbons including methane (CH4) and formaldehyde (HCHO). Half of the monitors were co-located with remote sensing spectrometers: NASA Pandora and Total Column Carbon Observing Network (TCCON). The overlap in pollutants includes NO2, O3, and HCHO between the INSTEP monitors and the Pandora column measurements. TCCON covers column CO, CO2, and CH4, rounding out our comparison. Most of the monitors were distributed throughout the San Francisco Bay area, and an additional three were located within 100 km of Los Angeles. The sites ranged in geographic and population characteristics, including desert, mountainous, coastal, and urban locations. Since varying environmental conditions such as temperature and pressure are known to challenge sensor performance, we will apply newer sensor “calibration” techniques meant to combat this. We will normalize our sensor signals by z-scoring them prior to applying a single calibration model in the form of multivariate linear regression or an artificial neural network. While this technique has been validated for the hydrocarbon and ozone sensor types (metal oxide), it has not yet been tested on electrochemical and non-dispersive infrared sensors, which are also used in the INSTEP monitors. This will serve as a test to see if this normalization technique – or another – is most effective in accounting for environmental differences among sensors. Related data analysis efforts have found success with a variety of geospatial analysis techniques, including weighted network models in which high-quality instruments are given higher weights than their low-cost counterparts. Our preliminary analysis will focus on kriging, which uses a Gaussian algorithm to assign weights, providing estimated pollution levels at locations between monitors. Smoke trajectory and evolution will also be considered using both measurement types. We also aim to baseline subtract our emission estimates from each region to determine which portion of emissions are regional and local, further characterizing burn differences in northern and southern California fires. Future directions include using INSTEP jointly with TEMPO satellite data, and mobile deployments on aircraft and uncrewed aerial vehicles (UAV).

Low-cost sensors↗
DOE OSTI2024

Tree Canopy in Beacon Hill, Washington [Slides]

This technical assistance through the Communities LEAP program aims to provide the Solutions' Collaborative with information and geospatial analysis of tree canopy coverage in Beacon Hill, Seattle as a high priority environmental justice community with the goal of exploring the benefits of trees to improve air quality and mitigate extreme heat. It further provides information on tree-planting programs in Seattle and King County.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Optimizing Geospatial Assessments for Nuclear Safeguards Applications with Large Language Models

A multidisciplinary team at Argonne National Laboratory evaluated the ability of large language models (LLMs) to identify geographic locations from open-source text and assessed post-processing measures to strengthen the reliability of those extractions in support of international nuclear safeguards. The study focused on addressing challenges such as toponym ambiguity, imprecise descriptions, and misinformation, which often undermine the accuracy of LLM-derived geospatial assessments. By integrating authoritative geospatial datasets, employing rigorous validation techniques, and leveraging human-in-the-loop processes, the project aimed to enhance the precision, transparency, and reproducibility of geospatial localization workflows. The findings demonstrate that while LLMs exhibit significant potential for accelerating geospatial analysis, their outputs require systematic grounding and verification to ensure reliability in high-stakes applications. This work contributes to the broader field of geospatial intelligence and supports strategic objectives of international organizations such as the International Atomic Energy Agency (IAEA) and the U.S. Department of Energy (DOE).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Estimating geographic origins of corn and soybean biomass for biofuel production: A detailed dataset

Sustainable fuel initiatives in the United States such as the Environmental Protection Agency’s Renewable Fuel Stan- dard and the Department of Energy’s Sustainable Aviation Fuel Grand Challenge have increased the production of corn ethanol and soybean biodiesel. However, the lack of precise information regarding biomass sourcing at a localized level has hindered accurate understanding of both biofuel costs and environmental impact of these production pathways. By harnessing the power of geospatial analysis and leveraging United States Department of Agriculture (USDA) crop cen- sus data, this dataset fills this critical knowledge gap. This dataset offers a novel estimation of geospatial biomass sourc- ing for biofuel production in the United States by synthe- sizing 2017 USDA crop census data, biorefinery data from the United States Energy Information Administration, and publicly available information about biomass sourcing for biofuel production. This dataset provides a detailed under- standing of biomass use for first generation biofuel pro- duction, enabling stakeholders to make informed decisions about resource allocation, investment strategies, and infras- tructure development. Furthermore, the county-level gran- ularity of the dataset allows for increased fidelity in the techno-economic assessments and life-cycle analyses of first- generation biofuels in the United States.

09 BIOMASS FUELS↗
NASA NTRS2020

Application of Remote Sensing for Ex-Ante Decision Support and Evaluating Impact

Deforestation is an environmental stressor that dramatically threatens biodiversity while having adverse, deep-rooted socioeconomic impacts. Interventions to address deforestation require considerable long-term investments; therefore, assessing their impact is crucial. The UN Convention on Biological Diversity encourages establishing Protected Areas (PAs) as a strategy to conserve biodiversity, secure ecosystem services, support local livelihoods, and reduce climate change impacts. The Global Environment Facility (GEF) has supported the conservation and management of PAs, yet site accessibility and data availability present challenges in assessing PAs using traditional evaluation methods. We present a novel application of satellite Earth observations for evaluating the effectiveness and impact of PAs as a deforestation mitigation strategy. Geospatial analysis and ecological forecasting methodologies provide an efficient way to quantify land cover change, estimate above-ground carbon stock, and evaluate ecosystem services provided by the PAs ex-ante. We demonstrate the value of a geospatial approach through evaluation of GEF-supported PAs in Kenya.

Remote sensing↗
DOE OSTI2022

Better Buildings Workforce Accelerator – Technical Assistance Project: Northwest Energy Efficiency Council – A Replicable Analysis for Building Operator Certification Diversity, Equity, and Inclusion Objectives

The Northwest Energy Efficiency Council (NEEC) requested technical assistance through the U.S. Department of Energy (DOE) Better Buildings Workforce Accelerator (BBWA) program, with the objective of developing a replicable analytical approach to understanding Building Operator Certification (BOC) program participants and measure progress towards diversity, equity, and inclusion objectives. The technical assistance advances NEEC’s progress towards their goal of recruiting more diverse students to the BOC training and certification program. This report develops a replicable geospatial analysis of BOC program participants based on DEI indicators that can be applied at a national level, provides a step-by-step guide on repeating and updating the analysis, and presents recommendations for future data collection and analysis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Use of the Tool to Support Renewable Energy Project Development (RE Data Explorer)

The Renewable Energy (RE) Data Explorer is a user-friendly, geospatial analysis tool for analyzing renewable energy potential and informing decisions. Developed by the National Renewable Energy Laboratory (NREL) and supported by the U.S. Agency for International Development (USAID), RE Data Explorer performs visualization and analysis of renewable energy potential that can be customized for different scenarios. RE Data Explorer can support prospecting, integrated planning, policymaking, and other decision-making activities to accelerate renewable energy deployment. This document provides information on how the RE Data Explorer can support private sector utility-scale renewable energy project development.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Land of Opportunity: Potential for Renewable Energy on Federal Lands

Renewable energy (RE) in the United States has historically been deployed primarily on private lands, but the growing interest in RE development, generally across the country and specifically on federal lands, raises questions about the potential for RE on public lands. This study seeks to estimate RE technical potential on federal lands and project the amount of RE to be developed on federal lands under decarbonization scenarios for the contiguous United States. The study applied a combination of high-resolution geospatial analysis and power sector modeling and relied on multiple partner federal agencies and land administrators from the Bureau of Land Management, the U.S. Fish and Wildlife Service, the U.S. Forest Service, the U.S. Department of Defense, and the U.S. Department of Energy. In our reference siting access case, we estimate 44 million acres of federal land across the contiguous United States is potentially suitable for UPV development, which corresponds to a capacity technical potential of 5,750 gigawatts (GW) (Figure ES-1). Federal land area available for wind development is similar to UPV but wind’s generating capacity technical potential is lower (875 GW). The technical potential is estimated for two geothermal technologies, hydrothermal and enhanced geothermal systems (EGS), both of which have a smaller amount of federal land available for development (12 and 27 million acres, respectively). However, in terms of capacity, the technical potential for EGS (975 GW) is approximately equal to wind’s technical potential and there is an estimated 130 GW of hydrothermal potential. We also developed cases with more-limited land available for UPV and wind (for federal and non-federal lands) resulting in 96% reduction of wind capacity potential and 70% reduction for UPV. In a case with additional constraints applied to non-federal lands only (Limited Private), the overall (federal and non-federal) technical potential declines but the share of that technical potential on federal lands is higher than in the other siting cases. The technical potential is the maximum amount that could be developed, but only a small fraction would be developed or needed in the future. Across seven scenarios that achieve 100% carbon-free electricity by 2035, we estimate 26 GW to 270 GW of RE capacity could be deployed on federal lands by 2035. The three central scenarios have 51–84 GW of RE deployed by 2035 and requiring about 500,000 to 1,000,000 acres of total land area. Direct land consumption is less than total land use required, thus enabling co-use opportunities. The large technical potential estimates and the increasing deployment projections from the collection of scenarios show the opportunities for RE development on federal lands. Capturing these opportunities-while minimizing conflicts with other land uses, federal department or agency missions, and public interest, and simultaneously maximizing the economic, grid, and social value of the projects-would require collaborative planning among federal land administrators, grid planners, project developers, the public, and other stakeholders.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Optimising the geospatial configuration of a future lithium ion battery recycling industry in the transition to electric vehicles and a circular economy

Rapid electrification of the transport system will generate substantial volumes of Lithium-ion-battery (LiB) waste as batteries reach their end-of-life. Much attention focuses on the recycling processes, neglecting a broader systemic view that considers the concentration of the costs and impacts associated with logistics and transportation. This paper provides an economic, environmental and geospatial analysis of a future LiB recycling industry in the UK. Hitherto, state-of-the-art assessment methods have evaluated life cycle impacts and costs but have not considered the geographical layer of the problem. This paper develops a GSC derived supply chain model for the UK electric vehicle and end-of-life vehicle battery industry. Considering both pyrometallurgical and hydrometallurgical recycling technologies, the optimisation process takes into account anticipated EV volumes, and, based on anticipated near-term technological evolution of LiBs, the evolution of the mix of battery cathodes in production, and presents a number of scenarios to show where LiB recycling facilities should ideally be geographically located. An economic and environmental assessment based on a customised EverBatt model is provided.

25 ENERGY STORAGE↗
DOE OSTI2025

Hurricanes and turbulent floods threaten arsenic-contaminated coastal soils and vulnerable communities

Coastal environments, particularly those adjacent to Superfund sites, are at increased risk of contaminant release during natural disasters, posing serious threats to nearby communities. To investigate this issue, we employed an advanced laboratory flood simulator to impose arsenic-contaminated sediments to turbulent flooding events. We further monitored changes in arsenic collocation and solid-phase speciation using advanced synchrotron radiation-based techniques to understand the impacts of flooding on arsenic mobility. Our results demonstrate that turbulent conditions significantly enhance the resuspension of arsenic-rich sediments, resulting in increased arsenic release into the water. This mobilization is driven by the erosion of the reduced sediments and the redox-mediated transformation and dissolution of Fe and Mn (oxyhydr) oxides, which promote the release of As(III). We found that arsenic speciation on resuspended particles is closely tied to shear stress, with As(V) prevailing at low stress and the more toxic As(III) dominating at higher stress levels. In the post-erosion phase, solid-phase As(III) decreased while dissolved As(III) increased, indicating ongoing desorption. The persistence of multiple arsenic species on resuspended particles marks them as potential long-range transport vectors. Thus, the environmental impact of flooding and sediment resuspension extends beyond the event itself, raising longer-term concerns for arsenic mobility. Our comprehensive geospatial analysis revealed substantial overlap between arsenic-contaminated soils and regions at high risk of flooding and hurricanes across the conterminous United States. This overlap disproportionately impacts economically disadvantaged and marginalized communities. Approximately 40 million Americans reside within 10 kilometers of these high-risk contaminated zones, with nearly 28 million exposed to hurricane threats and around 18 million vulnerable to flooding risks. Alarmingly, over 40% of those affected by hurricanes and 33% of those impacted by flooding belong to underrepresented minority and low-income populations. These findings highlight the urgent need for targeted mitigation strategies to protect public health and address environmental justice concerns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A novel approach for large-scale wind energy potential assessment

Increasing wind energy generation is central to grid decarbonization, yet methods to estimate wind energy potential are not standardized, leading to inconsistencies and even skewed results. This study aims to improve the fidelity of wind energy potential estimates through an approach that integrates geospatial analysis and machine learning (i.e., Gaussian process regression). We demonstrate this approach to assess the spatial distribution of wind energy capacity potential in the Contiguous United States (CONUS). We find that the capacity-based power density ranges from 1.70 MW/km2 (25th percentile) to 3.88 MW/km2 (75th percentile) for existing wind farms in the CONUS. The value is lower in agricultural areas (2.73 ± 0.02 MW/km2, mean ± 95 % confidence interval) and higher in other land cover types (3.30 ± 0.03 MW/km2). Notably, advancements in turbine manufacturing could reduce power density in areas with lower wind speeds by adopting low specific-power turbines, but improve power density in areas with higher wind speeds (>8.35 m/s at 120m above the ground), highlighting opportunities for repowering existing wind farms. Wind energy potential is shaped by wind resource quality and is regionally characterized by land cover and physical conditions, revealing significant capacity potential in the Great Plains and Upper Texas. The results indicate that areas previously identified as hot spots using existing approaches (e.g., the west of the Rocky Mountains) may have a limited capacity potential due to low wind resource quality. Improvements in methodology and capacity potential estimates in this study could serve as a new basis for future energy systems analysis and planning.

Dai, Tao↗
DOE OSTI2025

Benchmarking greenhouse gas emissions from US wastewater treatment for targeted reduction

Here, in this study, to assess the national climate impact of wastewater treatment and inform decarbonization, we assembled a comprehensive greenhouse gas inventory of 15,863 facilities in the contiguous USA. Considering location and treatment configurations, we modelled on-site CH 4 , N 2 O and CO 2 production and emissions associated with energy, chemical inputs and solids disposal. Using Monte Carlo simulations, we estimated median national emissions at 47 million tonnes of CO 2 equivalent per year, with on-site process CH 4 and N 2 O emissions exceeding current government estimates by 41%. Treatment configurations with anaerobic digesters are responsible for 16 million tonnes of CO 2 equivalent per year of fugitive methane, outweighing benefits achieved through on-site electricity generation. Systems designed for nutrient removal have the highest greenhouse gas emissions intensity, attributable to energy requirements and N 2 O production, demonstrating current trade-offs between meeting water quality and climate objectives. We analysed key sensitivities and included a geospatial analysis to highlight the scale and distribution of opportunities for reducing life cycle greenhouse gas emissions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Geographic Information System Mapping Tool for Rainwater Harvesting in the United States

The Rainwater Harvesting Tool is a publicly available web-based geographic information system tool developed using geospatial analysis in combination with historic ZIP Code level monthly average precipitation and evapotranspiration data across the United States to help select potential locations for harvesting rainwater. Rainwater harvesting can provide a key source of alternative water for a variety of uses including landscape irrigation, vehicle wash, cooling tower makeup, dust suppression, and toilet flushing. Rainwater harvesting can help support institutional, commercial, and residential buildings in diversifying water sources and offset the use of freshwater. This tool aims to help organizations strategically target locations to implement rainwater harvesting systems. The metric used in the tool is called the rainwater harvesting potential, which is a normalized metric, measured in inches per year. The rainwater harvesting potential describes the amount of rainwater that can be reasonably collected and stored at a specific location. This metric was used to rank areas delineated by ZIP Codes across the US, from lowest to highest to show the relative availability of rainwater for harvesting. Two mapping layers are included in the tool that show the general rainwater harvesting potential for all applications and a layer that specifically shows the potential for harvesting rainwater to supply irrigation The Rainwater Harvesting Tool allows users to view overall trends across the United States, while also allowing the user to zoom in to a scale where ZIP Code boundaries are clearly delineated. The tool can be used to help organizations with buildings located in multiple regions to strategically identify where to install rainwater harvesting systems and prioritize locations that may be optimal for rainwater harvesting.

47 OTHER INSTRUMENTATION↗