Geology, structure, and tectonics of the Pajarito fault zone in the Espanola basin of the Rio Grande rift, New Mexico
Explore the source record for details and available documents.
Golombek, M. P.↗
SEARCH · Engineering Papers
Results for “Geological faults”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Acoustic fluidization - A new geologic process
A number of geologic processes, particularly seismic faulting, impact crater slumping, and long runout landslides, require the failure of geologic materials under differential stresses much smaller than expected on the basis of conventional rock mechanics. This paper proposes that the low strengths apparent in these phenomena are due to a state of 'acoustic fluidization' induced by a transient strong acoustic wave field. The strain rates possible in such a field are evaluated, and it is shown that acoustically fluidized debris behaves as a newtonian fluid with a viscosity in the range 100,000 to 10,000,000 P for plausible conditions. Energy gains and losses in the acoustic field are discussed, and the mechanism is shown to be effective if internal dissipation in the field gives a Q approximately greater than 100. Whether such values for Q are realized is not known at present. However, acoustic fluidization provides a qualitatively correct description of the failure of rock debris under low differential stresses in the processes of faulting, crater slumping, and long runout landslides. Acoustic fluidization thus deserves serious consideration as a possible explanation of these phenomena.
Melosh, H. J.↗
Two-dimensional Finite Element Modeling for Modeling Tectonic Stress and Strain
Techniques of finite element analysis in two dimensional plane strain were applied to problems of geophysics and tectonics. More specifically, the flexibility of the finite element method was employed to address problems involving geological complexity and fault interactions. The modeling of effective anisotropy in material elastic properties proved useful in describing the deformation of faulted crustal blocks. The applications of this modeling work to problems of actual tectonics in southern California was explored. Preliminary models show encouraging agreement with measured tectonic strain in this region, and modeling work was done to gain an understanding of the stress state in a locked fault region with future seismic potential.
Lyzenga, G. A.↗
The nature of the Landers-Mojave earthquake line
The Landers, California, earthquake of 28 June 1992 (magnitude = 7.3) is the latest of six significant earthquakes in the past 60 years whose epicenters and slip directions define a 100-kilometer alignment running approximately N 15 deg W across the central Mojave region. This pattern may indicate a geologically young throughgoing fault that replaces numerous older strike-slip faults by obliquely cutting across them. These older faults, and perhaps also the bend in the San Andreas fault, may be losing their ability to accommodate upper crustal deformation because they have become unfavorably oriented with respect to the regional stress field.
Nur, Amos↗
A Mixed Finite Volume Element Method for Flow Calculations in Porous Media
A key ingredient in the simulation of flow in porous media is the accurate determination of the velocities that drive the flow. The large scale irregularities of the geology, such as faults, fractures, and layers suggest the use of irregular grids in the simulation. Work has been done in applying the finite volume element (FVE) methodology as developed by McCormick in conjunction with mixed methods which were developed by Raviart and Thomas. The resulting mixed finite volume element discretization scheme has the potential to generate more accurate solutions than standard approaches. The focus of this paper is on a multilevel algorithm for solving the discrete mixed FVE equations. The algorithm uses a standard cell centered finite difference scheme as the 'coarse' level and the more accurate mixed FVE scheme as the 'fine' level. The algorithm appears to have potential as a fast solver for large size simulations of flow in porous media.
Jim E Jones↗
ERTS Applications in earthquake research and mineral exploration in California
Examples that ERTS imagery can be effectively utilized to identify, locate, and map faults which show geomorphic evidence of geologically recent breakage are presented. Several important faults not previously known have been identified. By plotting epicenters of historic earthquakes in parts of California, Sonora, Mexico, Arizona, and Nevada, we found that areas known for historic seismicity are often characterized by abundant evidence of recent fault and crustal movements. There are many examples of seismically quiet areas where outstanding evidence of recent fault movements is observed. One application is clear: ERTS-1 imagery could be effectively utilized to delineate areas susceptible to earthquake recurrence which, on the basis of seismic data alone, may be misleadingly considered safe. ERTS data can also be utilized in planning new sites in the geophysical network of fault movement monitoring and strain and tilt measurements.
Abdel-Gawad, M.↗
FAULT MECHANICS OF THE LUNAR STRAIGHT WALL AND THE NATURE OF MARE MATERIAL
Fault mechanics of lunar straight wall and mare nibium - lunar geology
FAULT MECHANICS↗
Complex early rifting in Valles Marineris: Results from preliminary geologic mapping of the Ophir Planum Region of Mars
Photogeologic mapping of the Ophir Planum quadrangle was undertaken to solve two main problems: (1) what controlled the location, orientation, and growth of Ophir Planum grabens; and (2) how are the grabens and trough faulting related. The rich geological history of the Ophir Planum quadrangle underscores the fundamental importance of faulting in the early growth of Valles Marineris.
Schultz, Richard A.↗
Lineaments in basement terrane of the Peninsular Ranges, Southern California
The author has identified the following significant results. ERTS and Skylab images reveal a number of prominent lineaments in the basement terrane of the Peninsular Ranges, Southern California. The major, well-known, active, northwest trending, right-slip faults are well displayed; northeast and west to west-northwest trending lineaments are also present. Study of large-scale airphotos followed by field investigations have shown that several of these lineaments represent previously unmapped faults. Pitches of striations on shear surfaces of the northeast and west trending faults indicate oblique slip movement; data are insufficient to determine the net-slip. These faults are restricted to the pre-tertiary basement terrane and are truncated by the major northwest trending faults. They may have been formed in response to an earlier stress system. All lineaments observed in the space photography are not due to faulting, and additional detailed geologic investigations are required to determine the nature of the unstudied lineaments, and the history and net-slip of fault-controlled lineaments.
Merifield, P. M.↗
Application of ERTS-1 imagery in the fields of geology, agriculture, forestry, and hydrology to selected test sites in Iran
The preliminary study of the ERTS-1 imagery coverage of Iran, commenced on October 26, 1972. All of the images were carefully examined, and a photomosaic covering approximately ninety-five per cent of the country was prepared. A number of images of selected areas were studied in detail. In the field of geology, a number of large scale faults were identified, which do not figure on geological maps. Furthermore, a preliminary study was carried out on the recent sediments, their possible sources, and origin. A limited number of geological work maps were prepared as well. In the fields of agriculture and forestry, studies based on color composite prints of certain areas were undertaken, with a purpose of identifying potential arable areas. Investigations in the field of water resources resulted in the discovery of a number of small lakes, and streams. Furthermore, fluctuations of the water level in some lakes were observed.
Ebtehadj, K.↗
Alaska Crustal Deformation: Finite Element Modeling Constrained by Geologic and Very Long Baseline Interferometry Data
We compute crustal motions in Alaska by calculating the finite element solution for an elastic spherical shell problem. The method we use allows the finite element mesh to include faults and very long baseline interferometry (VLBI) baseline rates of change. Boundary conditions include Pacific-North American (PA-NA) plate motions. The solution is constrained by the oblique orientation of the Fairweather-Queen Charlotte strike-slip faults relative to the PA-NA relative motion direction and the oblique orientation from normal convergence of the eastern Aleutian trench fault systems, as well as strike-shp motion along the Denali and Totschunda fault systems. We explore the effects that a range of fault slip constraints and weighting of VLBI rates of change has on the solution. This allows us to test the motion on faults, such as the Denali fault, where there are conflicting reports on its present-day slip rate. We find a pattern of displacements which produce fault motions generally consistent with geologic observations. The motion of the continuum has the general pattern of radial movement of crust to the NE away from the Fairweather-Queen Charlotte fault systems in SE Alaska and Canada. This pattern of crustal motion is absorbed across the Mackenzie Mountains in NW Canada, with strike-slip motion constrained along the Denali and Tintina fault systems. In south central Alaska and the Alaska forearc oblique convergence at the eastern Aleutian trench and the strike-shp motion of the Denali fault system produce a counterclockwise pattern of motion which is partially absorbed along the Contact and related fault systems in southern Alaska and is partially extruded into the Bering Sea and into the forearc parallel the Aleutian trench from the Alaska Peninsula westward. Rates of motion and fault slip are small in western and northern Alaska, but the motions we compute are consistent with the senses of strike-slip motion inferred geologically along the Kaltag, Kobuk Trench, and Thompson Creek faults and with the normal faulting observed in NW Alaska near Nome. The nonrigid behavior of our finite element solution produces patterns of motion that would not have been expected from rigid block models: strike-slip faults can exist in a continuum that has motion mostly perpendicular to their strikes, and faults can exhibit along-strike differences in magnitudes and directions.
Lundgren, Paul↗
Effective radar look directions for geologic interpretation
Semiquantitative radar look-direction analysis of faults, joint systems, and dip slopes and radar detectability of geologic features
Mac Donald, H. C.↗
Aseismic crustal deformation in the Transverse Ranges of southern California
Using geodetic data at a plate boundary, the subsurface displacements that accompany plate motion were modeled as the sum of rigid block motion and the elastic effects of frictional drag between blocks in a model consisting of 12 blocks and 27 rectangular fault patches. The block motion inferred from the geodetic data has the same order of magnitude as the geologic estimates, and for many faults the agreement was excellent. The model implies about 20 mm/y of crustal shortening normal to the trend of the San Andreas fault.
Cheng, Abe↗
The 1974 Ethiopian rift geodimeter survey
The field techniques and methods of data reduction for five successive geodimeter surveys in the Ethiopian rift valley are enlarged upon, with the considered conclusion that there is progressive accumulation of upper crustal strain, consonant with on-going rift extension. The extension is restricted to the Quaternary volcanotectonic axis of the rift, namely the Wonji fault belt, and is occurring at rates of 3 to 6 mm/yr in the northern sector of the rift valley. Although this concurs with the predictions of platetectonic analysis of the Afar triple junction, it is considered premature to endorse such a concurrence on the basis of only 5 years of observations. This is underlined by the detection of local tectonic contractions and expansions associated with geothermal and gravity anomalies in the central sector of the rift valley. There is a hint of a component of dextral slip along some of the rift-floor fault zones, both from geological evidence and from the strain patterns detected in the present geodetic surveys.
Mohr, P.↗
Geologic interpretation of LANDSAT satellite images for the Qattara Depression area, Egypt
The author has identified the following significant results. For the first time the regional geological units are given. Faults, fractures, and folds are included, as well as drainage lines which help to visualize the environmental impact of the Qattara project for electric power generation and to assess the regional questions involved in its implementation.
Elshazly, E. M.↗
Constraints on the Evolution of the Dichotomy Boundary at 50-90E
The global dichotomy is a fundamental feature of Mars. It marks the boundary between the highly cratered, older southern highlands, and the northern plains. Recent analysis of buried craters in the northern lowlands confirms the long held suspicion that they are comparable in age to the southern highlands, but with surficial deposits of younger material. A variety of exogenic and endogenic models have been proposed for the origin of the dichotomy, including multiple impacts, plate tectonics, and degree one convection produced by core formation, a plume under the lowlands, or a plume under the highlands. New gravity and topography data from the Mars Global Surveyor (MGS) Mission favor endogenic processes. In this study we examine MGS topography, gravity and magnetic field data to constrain the tectonic history the dichotomy in the region 30-60N and 50-90E, which encompasses portions of the Ismenius Lacus quadrangle. The dichotomy formed very early the history of Mars and has undergone extensive modification by impact cratering, erosion, and faulting. This history must be carefully interpreted in order to reconstruct the original nature of the dichotomy boundary and ultimately discriminate between models of origin. In the study area boundary-parallel faults are well preserved, and may be the result of gravitational relaxation. The geologic history has been examined in detail, including estimates of volumes of material eroded. Further, it is one of the few regions where there is a correlation between the free air gravity, magnetic anomalies, and the geology. This allows to constrain subsurface faulting beneath the lowlands fill material. In addition to being an excellent location to unravel the complex history of the dichotomy, this area preserves the transition from a highly magnetized highlands crust to an unmagnetized or slightly magnetized lowlands crust.
S E Smrekar↗
Mechanics of distributed fault and block rotation
Paleomagnetic data, structural geology, and rock mechanics are used to explore the validity and significance of the block rotation concept. The analysis is based on data from Northern Israel, where fault slip and spacing are used to predict block rotation; the Mojave Desert, with well documented strike-slip sets; the Lake Mead, Nevada fault system with well-defined sets of strike-slip faults; and the San Gabriel Mountains domain with a multiple set of strike-slip faults. The results of the analysis indicate that block rotations can have a profound influence on the interpretation of geodetic measurments and the inversion of geodetic data. Furthermore, the block rotations and domain boundaries may be involved in creating the heterogeneities along active fault systems which may be responsible for the initiation and termination of earthquake rupture.
Nur, A.↗
Delineation of major geologic structures in Turkey using SIR-B data
Shuttle Imaging Radar-B (SIR-B) images of well mapped segments of major faults, such as the North Anatolian Fault (NAF) and East Anatolian Fault (EAF) will be studied to identify the prominent signatures that characterize the fault zones for those specific regions. The information will be used to delineate the unmapped fault zones in areas with similar geological and geomorphological properties. The data obtained from SIR-B images will be compared and correlated with the LANDSAT thematic mapper and seismicity alignments based on well constrained earthquake epicenters.
Toksoz, M. N.↗