Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Generative model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Effect of wind turbine generator model and siting on wind power changes out of large WECS arrays

Methods of reducing the WECS generation change through selection of the wind turbine model for each site, selection of an appropriate siting configuration, and wind array controls are discussed. An analysis of wind generation change from an echelon and a farm for passage of a thunderstorm is presented. Reduction of the wind generation change over ten minutes is shown to reduce the increase in spinning reserve, unloadable generation and load following requirements on unit commitment when significant WECS generation is present and the farm penetration constraint is satisfied. Controls on the blade pitch angle of all wind turbines in an array or a battery control are shown to reduce both the wind generation change out of an array and the effective farm penetration in anticipation of a storm so that the farm penetration constraint may be satisfied.

Schleuter, R. A.↗
NASA NTRS2017

Sonora: A New Generation Model Atmosphere Grid for Brown Dwarfs and Young Extrasolar Giant Planets

Brown dwarf and giant planet atmospheric structure and composition has been studied both by forward models and, increasingly so, by retrieval methods. While indisputably informative, retrieval methods are of greatest value when judged in the context of grid model predictions. Meanwhile retrieval models can test the assumptions inherent in the forward modeling procedure. In order to provide a new, systematic survey of brown dwarf atmospheric structure, emergent spectra, and evolution, we have constructed a new grid of brown dwarf model atmospheres. We ultimately aim for our grid to span substantial ranges of atmospheric metallilcity, C/O ratios, cloud properties, atmospheric mixing, and other parameters. Spectra predicted by our modeling grid can be compared to both observations and retrieval results to aid in the interpretation and planning of future telescopic observations. We thus present Sonora, a new generation of substellar atmosphere models, appropriate for application to studies of L, T, and Y-type brown dwarfs and young extrasolar giant planets. The models describe the expected temperature-pressure profile and emergent spectra of an atmosphere in radiative-convective equilibrium for ranges of effective temperatures and gravities encompassing 200 less than or equal to T(sub eff) less than or equal to 2400 K and 2.5 less than or equal to log g less than or equal to 5.5. In our poster we briefly describe our modeling methodology, enumerate various updates since our group's previous models, and present our initial tranche of models for cloudless, solar metallicity, and solar carbon-to-oxygen ratio, chemical equilibrium atmospheres. These models will be available online and will be updated as opacities and cloud modeling methods continue to improve.

emergent spectra↗
NASA NTRS1973

Supplementary notes on sea-surface temperature anomalies and model-generated meteorological histories

A numerical experiment was made on the Mintz-Arakawa two-level global general circulation model, investigating the effects of a transient one-month sea-surface temperature (SST) anomaly and of a persistent three-month SST anomaly. The time histories are compared with a control run that lacked the anomaly pattern. After one month, the anomaly and control synoptic patterns were as uncorrelated as any two random fields. It is found that the transient SST anomaly can alter the monthly and seasonal temperature and precipitation in the eastern U.S. by as much as two class intervals. The question of whether the real atmosphere is as sensitive to such an anomaly is raised but cannot be settled at this time.

Spar, J.↗
NASA NTRS2002

Vortex Generator Model Developed for Turbomachinery

A computational model was developed at the NASA Glenn Research Center to investigate possible uses of vortex generators (VG's) for improving the performance of turbomachinery. A vortex generator is a small, winglike device that generates vortices at its tip. The vortices mix high-speed core flow with low-speed boundary layer flow and, thus, can be used to delay flow separation. VG's also turn the flow near the walls and, thus, can be used to control flow incidence into a turbomachinery blade row or to control secondary flows.

Chima, Rodrick V.↗
NASA NTRS1990

A graphical language for reliability model generation

A graphical interface capability of the hybrid automated reliability predictor (HARP) is described. The graphics-oriented (GO) module provides the user with a graphical language for modeling system failure modes through the selection of various fault tree gates, including sequence dependency gates, or by a Markov chain. With this graphical input language, a fault tree becomes a convenient notation for describing a system. In accounting for any sequence dependencies, HARP converts the fault-tree notation to a complex stochastic process that is reduced to a Markov chain which it can then solve for system reliability. The graphics capability is available for use on an IBM-compatible PC, a Sun, and a VAX workstation. The GO module is written in the C programming language and uses the Graphical Kernel System (GKS) standard for graphics implementation. The PC, VAX, and Sun versions of the HARP GO module are currently in beta-testing.

Howell, Sandra V.↗
NASA NTRS1980

Computer-aided design of curved surfaces with automatic model generation

The design and visualization of three-dimensional objects with curved surfaces have always been difficult. The paper given below describes a computer system which facilitates both the design and visualization of such surfaces. The system enhances the design of these surfaces by virtue of various interactive techniques coupled with the application of B-Spline theory. Visualization is facilitated by including a specially built model-making machine which produces three-dimensional foam models. Thus, the system permits the designer to produce an inexpensive model of the object which is suitable for evaluation and presentation.

Staley, S. M.↗
NASA NTRSDate not supplied

Coaxial Rotor CFD Validation and ML Surrogate Model Generation

A fixed-pitch speed-controlled coaxial rotor system was tested in the NASA Langley Transonic Dynamics Tunnel in September 2022. The rotors have a diameter of 1.35 meters and an inter-rotor spacing of 25% of the diameter. Though this test was focused on the NASA New Frontiers Dragonfly mission, the resulting dataset is relevant to a wide array of applications of multirotor vehicles, especially those using fixed-pitch variable-speed rotors. Most notably beyond Dragonfly, perhaps, is the application of coaxial rotor pair configurations for eVTOL and Urban Air Mobility (UAM) aircraft. This work provides a thorough CFD validation study quantifying coaxial rotor performance estimation with accuracy on order 5-10% using an efficient hybrid BEMT-URANS flow solver over a wide range of operating conditions. This accuracy was achieved using novel approaches for the construction of both the C81 airfoil performance lookup tables and the BEMT rotor model. These novel approaches are combined with advanced scripting to further accelerate the commercial off-the-shelf CFD solver on GPU accelerated machines. Finally, the development of machine learning surrogate models is presented to produce highly efficient and accurate rotor performance predictions for fixed-pitch variable-speed multirotor aircraft over the complete flight regime including scout, cruise, climb, descent, as well as limiting cases of vortex-ring and windmill-brake states.

Coaxial↗
NASA NTRS1974

Multivariant function model generation

The development of computer programs applicable to space vehicle guidance was conducted. The subjects discussed are as follows: (1) determination of optimum reentry trajectories, (2) development of equations for performance of trajectory computation, (3) vehicle control for fuel optimization, (4) development of equations for performance trajectory computations, (5) applications and solution of Hamilton-Jacobi equation, and (6) stresses in dome shaped shells with discontinuities at the apex.

Source record↗
NASA NTRS1979

Status of yield estimation technology: A review of second-generation model development and evaluation

Multiple regression models were studied in order to determine their yield estimation capability for any arbitrary unit area and to obtain greater responsiveness and accuracy through the use of additional data sources applied at smaller spatial and temporal scales. It was concluded that data base inadequacy was the factor limiting performance in the models studied and that each of the models has more yield predicting capability than was reached during LACIE.

Stuff, R. G.↗
NASA NTRS1981

The thermal influence of continents on a model-generated January climate

Two climate simulations were compared. Both climate computations were initialized with the same horizontally uniform state of rest. However, one is carried out on a water planet (without continents), while the second is repeated on a planet with geographically realistic but flat (sea level) continents. The continents in this experiment have a uniform albedo of 0.14, except where snow accumulates, a uniform roughness height of 0.3 m, and zero water storage capacity. Both runs were carried out for a 'perpetual January' with solar declination fixed at January 15.

Spar, J.↗
NASA NTRS1984

Comparison of GLAS retrieved cloud fields with model generated rainfall fields

Monthly mean fractional cloud cover for January and February 1979, retrieved from SOP 1 of FGGE, are compared with the total precipitation field derived diagonally from the GLAS analysis/forecast system for the same time period. The breakdown of cloudiness into day (3 AM) and night (3 PM) is consistent with maps of outgoing long wave and short wave radiation inferred from AVHRR data. Of the many regions of coincidence, there is a particularly striking phenomenon: west of the coast of Peru, at about 20 deg S, there is a distinct small scale maximum in precipitation which coincides precisely with a maximum in the cloudiness field. This maximum in cloudiness and precipitation does not appear in the NOAA/NESS fields of albedo and outgoing long wave radiation which are normally sensitive to cloud fields. These low level clouds with warm tops are a mainly nocturnal phenomenon.

Susskind, J.↗
NASA NTRS1989

Generation models of electron conics

Electron distribution functions (EDFs) with a peak oblique to the magnetic field, adjacent to but distinct from loss-cone features, have been observed by the DE 1, Viking, and S3-3 spacecraft in passes through the nightside auroral zone, polar cap, dayside cusp, and extended dayside auroral oval. Using particle simulations, two types of wave excitation and particle acceleration mechanisms which may contribute to producing these electron conic distributions are investigated. The first involves excitation of upper-hybrid waves by the electron loss cone, and the subsequent perpendicular heating of the background and thermal electrons. The second involves excitation of downward propagating parallel modes by an auroral electron beam which frequently accompanies the upflowing electron conics. These modes provide parallel acceleration, which modifies the GDF. Those electrons which are not lost to the atmosphere and mirror back up the magnetic field line give rise to enhancements in the GDF at the edge of the loss cone.

Roth, I.↗
NASA NTRS2016

The Characterization of a DIRSIG Simulation Environment to Support the Inter-Calibration of Spaceborne Sensors

Climate change studies require long-term, continuous records that extend beyond the lifetime, and the temporal resolution, of a single remote sensing satellite sensor. The inter-calibration of spaceborne sensors is therefore desired to provide spatially, spectrally, and temporally homogeneous datasets. The Digital Imaging and Remote Sensing Image Generation (DIRSIG) tool is a first principle-based synthetic image generation model that has the potential to characterize the parameters that impact the accuracy of the inter-calibration of spaceborne sensors. To demonstrate the potential utility of the model, we compare the radiance observed in real image data to the radiance observed in simulated image from DIRSIG. In the present work, a synthetic landscape of the Algodones Sand Dunes System is created. The terrain is facetized using a 2-meter digital elevation model generated from NASA Goddard's LiDAR, Hyperspectral, and Thermal (G-LiHT) imager. The material spectra are assigned using hyperspectral measurements of sand collected from the Algodones Sand Dunes System. Lastly, the bidirectional reflectance distribution function (BRDF) properties are assigned to the modeled terrain using the Moderate Resolution Imaging Spectroradiometer (MODIS) BRDF product in conjunction with DIRSIG's Ross-Li capability. The results of this work indicate that DIRSIG is in good agreement with real image data. The potential sources of residual error are identified and the possibilities for future work are discussed..

Ambeau, Brittany L.↗
NASA NTRS1983

Advanced earth observation spacecraft computer-aided design software: Technical, user and programmer guide

The IDEAS computer of NASA is a tool for interactive preliminary design and analysis of LSS (Large Space System). Nine analysis modules were either modified or created. These modules include the capabilities of automatic model generation, model mass properties calculation, model area calculation, nonkinematic deployment modeling, rigid-body controls analysis, RF performance prediction, subsystem properties definition, and EOS science sensor selection. For each module, a section is provided that contains technical information, user instructions, and programmer documentation.

Farrell, C. E.↗
NASA NTRS1990

COMGEN: A computer program for generating finite element models of composite materials at the micro level

COMGEN (Composite Model Generator) is an interactive FORTRAN program which can be used to create a wide variety of finite element models of continuous fiber composite materials at the micro level. It quickly generates batch or session files to be submitted to the finite element pre- and postprocessor PATRAN based on a few simple user inputs such as fiber diameter and percent fiber volume fraction of the composite to be analyzed. In addition, various mesh densities, boundary conditions, and loads can be assigned easily to the models within COMGEN. PATRAN uses a session file to generate finite element models and their associated loads which can then be translated to virtually any finite element analysis code such as NASTRAN or MARC.

Melis, Matthew E.↗
NASA NTRS2005

Generating Solid Models from Topographical Data

A method of generating solid models of terrain involves the conversion of topographical data into a form useable by a rapid-prototyping (RP) machine. The method was developed to enable the use of the RP machine to make solid models of Martian terrain from Mars Orbiter laser-altimeter topographical data. The method is equally applicable to the generation of models of the terrains of other astronomical bodies, including other planets, asteroids, and Earth. Topographical data describe a terrain in terms of a set of three-dimensional coordinates [e.g., Cartesian (x,y,z) or polar (latitude, longitude, radius) coordinates] of points or nodes on the terrain surface. The input data for the RP machines are required to provide a three-dimensional description, not of a single surface, but of a volume in this case, a ground volume that underlies the terrain surface. The description is required to be in the form of triangular elements that connect the nodes of all the surfaces and that completely bound the volume, with no open areas, no overlap of triangles, and no extraneous geometric elements. The software used in the present model-generation method was written in IDL - an advanced programming language that affords a number of tools, including subroutines that triangularize surfaces. The software creates a volume from the topographical surface data by adding sides to the edges of the terrain surface and joining the sides with a bottom surface. Each of the sides is triangularized by use of IDL subroutines, and then the software searches for extraneous elements and removes them. Topographical data are usually presented in a grid corresponding to polar coordinates, so that a model generated from such data is equivalent to a topographical map in Mercator projection. However an RP machine is fully capable of including the curvature of a planetary body in a model that it makes. Therefore, the software also offers a capability to transform the topographical data to a projection onto a surface having a curvature corresponding to that of the surface of the modeled planet.

Keller, John W.↗