Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GROUND CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Ground Control Station Development for the Dexterous Orbital Servicing System

The Dexterous Orbital Servicing System (DOSS) flight test program is being developed by NASA to verify the ability to utilize telerobotics for servicing Space Station Alpha. The development of a ground control station for Earth based control of DOSS is described. This flight test program provides a manipulator which is mounted on a multi-purpose experiment support structure in a Space Shuttle bay.

remote robotic control dexterous orbital servicing↗
NASA NTRSDate not supplied

MPATH (Measuring Performance for Autonomy Teaming with Humans) Ground Control Station: Design Approach and Initial Usability Results

Envisioned future Advanced Air Mobility (AAM) operations will require a transition of aircraft command and control from onboard pilots to remote operators. The National Aeronautics and Space Administration (NASA) has developed a research ground control station (GCS) software called MPATH (Measuring Performance for Autonomy Teaming with Humans) to study the human factors of remote operators in a representative AAM environment, where small uncrewed aerial systems (sUAS; simulated or real) act as surrogates for larger AAM aircraft. A primary focus of the research being conducted with the MPATH GCS is scalability (i.e., one human managing multiple vehicles). MPATH has demonstrated to be a useful capability for human factors research and remote operations. Two initial usability studies and a multi-vehicle control assessment were recently conducted, and usability data and operator feedback were collected. Generally, participants rated MPATH high on usability and interface quality, whereas information quality was rated slightly lower. These results were supported by specific feedback. Several generalized GCS design recommendations are proposed based on the results and feedback from these flight activities. Future updates to MPATH will incorporate the proposed recommendations. In practice, these recommendations could be used by any GCS software designer or developer to promote usability and safety.

Advanced Air Mobility↗
NASA NTRS2016

Developing an Adaptable NextGen Interface for the UAS Ground Control Station

Motivation: NextGen traffic infrastructure is in place to support manned aircraft operations. However, the UAS ground control station (GCS) adds a data interface requirement that is not yet fully accounted for in the NextGen data service architecture. Existing NextGen data service is focused on aircraft, not the GCS. Smaller UAS may not have the payload or power capacity to support the additional equipment. Innovation: Provide a mechanism for a UAS regardless of size, payload, bandwidth, and power capacity to gain access to NextGen data-sourced traffic information in real-time.

LVC↗
NASA NTRSDate not supplied

sUAS Ground Control Station Capabilities Impact on Fleet Management

Future Small Uncrewed Aerial Systems (sUAS) missions will require multiple operators to collaborate and manage large fleets of highly automated vehicles. It is critical that these operators maintain the necessary situational awareness to modify vehicle missions if/when unexpected situations arise in the operating environment. It has been suggested that highly automated vehicle capabilities can lead to reducing the capabilities given to operators to modify/direct vehicle missions. This paper explores various Ground Control Station (GCS) capabilities configurations and their impact on sUAS fleet management. Results show that a GCS with a combination of manual and automated capabilities allowed participants to make more effective decisions while maintaining workload and response times similar to that of a GCS with only automated capabilities.

sUAS↗
NASA NTRS2007

The Ground Control Room as an Enabling Technology in the Unmanned Aerial System

This viewgraph presentation reviews the development of the ground control room as an required technology for the use of an Unmanned Aerial system. The Unmanned Aerial system is a strategic component of the Global Observing System, which will serve global science needs. The unmanned aerial system will use the same airspace as manned aircraft, therefore there will be unique telemetry needs.

Gear, Gary↗
NASA NTRS1989

Interior noise control ground test studies for advanced turboprop aircraft applications

The measurement and analysis procedures are documented, and the results of interior noise control ground tests conducted on a DC-9 aircraft test section are summarized. The objectives of these tests were to study the fuselage response characteristics of treated and untreated aircraft with aft-mount advanced turboprop engines and to analyze the effectiveness of selected noise control treatments in reducing passenger cabin noise on these aircraft. The results of fuselage structural mode surveys, cabin cavity surveys and sound intensity surveys are presented. The performance of various structural and cabin sidewall treatments is assessed, based on measurements of the resulting interior noise levels under simulated advanced turboprop excitation.

Simpson, Myles A.↗
NASA NTRS1995

Limits to ground control in autonomous spacecraft

In this paper the autonomy concept used by ESA and NASA is critically evaluated. Moreover, a more proper ground control/spacecraft organizational structure is proposed on the basis of a new, more elaborated concept of autonomy. In an extended theoretical discussion its definitional properties and functionalities are established. The rather basic property of adaptivity leads to the categorization of behaviour into the modes of satisfaction and avoidance behaviour. However, the autonomy property with the most profound consequences is goal-robustness. The mechanism that implements goal-robustness tests newly generated goals and externally received goals on consistency with high-level goals. If goals appear not to be good instantiations or more acceptable replacements of existing goals, they are rejected. This means that ground control has to cooperate with the spacecraft instead of (intermittently) commanding it.

Wan, Alfred D. M.↗
NASA NTRS2010

Next Generation GPS Ground Control Segment (OCX) Navigation Design

In February 2010, a Raytheon-led team was selected by The Air Force to develop, implement, and operate the next generation GPS ground control segment (OCX). To meet and exceed the demanding OCX navigation performance requirements, the Raytheon team partnered with ITT (Navigation lead) and JPL to adapt major elements of JPL's navigation technology, proven in the operations of the Global Differential GPS (GDGPS) System. Key design goals for the navigation subsystem include accurate ephemeris and clock accuracy (user range error), ease of model upgrades, and a smooth and safe transition from the legacy system to OCX.We will describe key elements of the innovative architecture of the OCX navigation subsystem,and demonstrate the anticipated performance of the system through high fidelity simulations withactual GPS measurements.

Bertiger, Willy↗
NASA NTRS2004

Density Matching for Better Ground Control Experiments

Increasing the culture media density to more closely match the density of cells on microcarriers can reduce the differences in shear level and mass transport coefficients between flight and ground control experiments. This could allow a more direct determination of the effects of micro gravity on cell cultures. However, care must be taken to use operating conditions that will properly support the culture. Results from numerical simulations and some possible density matching procedures will be discussed.

Kleis, S.↗
NASA NTRS2016

Developing an Adaptable NextGen Interface for the UAS Ground Control Station

Presently a significant number of unmanned aircraft are not included in the existing National Airspace System surveillance system. This is due to many reasons including an inability to carry Automatic Dependent Surveillance Broadcast equipment for weight or power consumption deficiencies, legacy equipment usage, and the experimental nature of unmanned aircraft. In addition, pilots on the ground do not have the situation awareness to proximal aircraft pilots in the cockpit have. However, many unmanned aircraft utilize a link between the aircraft and ground control station that includes periodic updates to the aircraft position. Technologies have been developed to provide the existing national surveillance system with the location of the aircraft while at the same time providing the ground pilot a display with aircraft that are in the aircrafts proximity, thus expanding the national surveillance data as well as provide increased pilot situation awareness.

surveillance↗
NASA NTRS1993

An Advanced Operator Interface Design with Preview/Predictive Displays for Ground-Controlled Space Telerobotic Servicing

Recent advances in real-time 3-D graphics and graphical user interface (GUI) technologies enable development of advanced operator interfaces for telerobotic systems. In particular, we have employed preview/predictive displays with calibrated graphics overlay and X/Motif-based GUI's for efficient and reliable ground-controlled space telerobotic servicing under communication time delay.

Telerobotic↗
NASA NTRS1994

Intelligent resources for satellite ground control operations

This paper describes a cooperative approach to the design of intelligent automation and describes the Mission Operations Cooperative Assistant for NASA Goddard flight operations. The cooperative problem solving approach is being explored currently in the context of providing support for human operator teams and also in the definition of future advanced automation in ground control systems.

Jones, Patricia M.↗
NASA NTRS1990

Design and implementation of a ground control console prototype for OMV

One of the primary uses of the Flat Floor facility of The Marshall Flight Center is to perform autonomous and teleoperated docking of vehicles similar to NASA's Orbital Maneuvering Vehicle (OMV). Using both the air-bearing vehicle and the 8 DOF Dynamic Overhead Target Simulator (DOTS) in tandem, even the most difficult OMV docking problems can be simulated. The OMV was planned to be flown from the ground by a pilot via teleoperation. Specifications were developed for a prototype Ground Control Console (GCC) from where the vehicle will be flown. In order for testing of the OMV to occur at Flat Floor facility, this GCC must be replicated. The project was divided into three primary tasks: (1) the design and development of the video display; (2) the design and development of the switch panel using the micro switch programmable display pushbutton switches; and (3) the design and development of the hand controllers. A final task is to perform system integration on the results of these three primary tasks.

Walcott, Bruce L.↗
NASA NTRS1988

Automatic Scheduling and Planning (ASAP) in future ground control systems

This report describes two complementary approaches to the problem of space mission planning and scheduling. The first is an Expert System or Knowledge-Based System for automatically resolving most of the activity conflicts in a candidate plan. The second is an Interactive Graphics Decision Aid to assist the operator in manually resolving the residual conflicts which are beyond the scope of the Expert System. The two system designs are consistent with future ground control station activity requirements, support activity timing constraints, resource limits and activity priority guidelines.

Matlin, Sam↗
NASA NTRS1990

Automatic ground control point recognition with parallel associative memory

The basic principle of the associative memory is to match the unknown input pattern against a stored training set, and responding with the 'closest match' and the corresponding label. Generally, an associative memory system requires two preparatory steps: selecting attributes of the pattern class, and training the system by associating patterns with labels. Experimental results gained from using Parallel Associative Memory are presented. The primary concern is an automatic search for ground control points in aerial photographs. Synthetic patterns are tested followed by real data. The results are encouraging as a relatively high level of correct matches is reached.

Al-Tahir, Raid↗
NASA NTRS1993

A Prototype System for Ground Control Space Telerobotics

A telerobotics system is described which provides supervised autonomous control capability for time-delayed ground-remote control applications. The system includes a local site operator interface for interactive task description and a remote site task execution system. Interactive stereo graphics overlay on video is provided at the local site to update the remote environmental model. The remote site system is capable of nominal task execution as well as monitoring and reflex action. Execution utilizes multiple control modules which execute based upon command parameterization.

robotics autonomous control telerobotics manipulat↗
NASA NTRS2005

Experiences with a Requirements-Based Programming Approach to the Development of a NASA Autonomous Ground Control System

Requirements-to-Design-to-Code (R2D2C) is an approach to the engineering of computer-based systems that embodies the idea of requirements-based programming in system development. It goes further; however, in that the approach offers not only an underlying formalism, but full formal development from requirements capture through to the automatic generation of provably-correct code. As such, the approach has direct application to the development of systems requiring autonomic properties. We describe a prototype tool to support the method, and illustrate its applicability to the development of LOGOS, a NASA autonomous ground control system, which exhibits autonomic behavior. Finally, we briefly discuss other areas where the approach and prototype tool are being considered for application.

Hinchey, Michael G.↗