Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fourth Author”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Transients in Pacific/North American Plate Boundary Deformation: Synthesis and Modeling of GPS and Borehole Strain Observations

This is the Final Technical Report on research conducted between 1 June 1997 and 14 September 2001 entitled "Transients in Pacific/North American plate boundary deformation: Synthesis and modeling of GPS and borehole strain observations." As the project title implies, our effort involved a geodetic study of strain transients, i.e., temporal variations in deformation rates, that occur within plate boundary zones and their relationship to earthquakes and plate motions. Important transients occur during and following large earthquakes, and there are also strain transients not apparently associated with earthquakes. A particularly intriguing class of transients, for which there is a modest but growing list of examples, are preseismic anomalies. Such earthquake precursors, if further documented and understood, would have obvious importance for earthquake hazard mitigation. Because the timescales for these diverse transients range over at least 6 orders of magnitude (minutes to years), no single geodetic technique is optimum. We therefore undertook a systematic synthesis of Global Positioning Satellite (GPS) and borehole strainmeter data in three areas in California where there are adequate numbers of both types of instruments (or their equivalent): the San Francisco Bay region (within the Bay Area Regional Deformation network), southern California (within the Southern California Integrated GPS Network), and Parkfield (where a two-color laser system provides a proxy for continuous GPS measurements). An integral component of our study was the elucidation of the physical mechanisms by which such transients occur and propagate. We therefore initiated the development of multiple forward models, using two independent approaches. In the first, we explored the response to specified earthquake slip in viscoelastic models that incorporated failure criteria and the geometry of major faults in California. In the second approach, we examined the dynamical response of a complex rheological medium to the application of a far-field stress imposed by plate motions. The forward models were used both to gain insight into the range of strain transients to be expected under different assumed mechanical conditions and to develop representations for strain fields that allow GPS, borehole, and other strain data to be combined in a self-consistent, yet well-determined, manner. The models also provided a basis for hypothesis testing, by which data from a strain transient well characterized by GPS and borehole observations were utilized to distinguish among competing candidates for the causative physical mechanism and the governing physical characteristics. During the three years of this project, continued to a fourth year through a no-cost extension of the grant, we published 14 papers and presented or co-authored 37 papers at national scientific meetings.

Solomon, Sean C.↗

Spatial Information Technology Center at Fulton-Montgomery Community College

The Spatial Information Technology Center (SITC) at Fulton-Montgomery Community College (FMCC) continued to fulfill its mission and charter by successfully completing its third year of operations under Congressional funding and NASA sponsorship. Third year operations (01 Oct 02 - 30 Sep 03) have been funded and conducted utilizing two authorized Research Grants NAG 13-00043 (via a one-year no-cost extension expiring Sep 03) and NAG 13-02053 (one-year no-cost extension expiring Sep 04). Drawdowns and reporting of fiscal activities for SlTC operations continues to pass through the Institute for the Application of Geo-spatial Technology (IAGT) at Cayuga Community College in Auburn, New York. Fiscal activity of the Center is reported quarterly via SF 272 to IAGT, thus this report contains only a budgetary overview and forecast of future expenditures for the remaining funds of NAG 13 - 02053. Funds from NAG 13 - 00043 were exhausted during the fourth quarter of fiscal year FY02 - 03, which necessitated initial draw down of NAG 13 - 02053. The IAGT receives no compensation for administrative costs as authorized and approved by NASA in each award budget. This report also includes the necessary addendums for each NAG award, as required by federal guidelines, though no reportable activities took place within this report period. Attached are the signed Report of New Technology/lnventions and a Final Property Report identifying qualifying equipment purchased by the Center. As an academic, economic and workforce development oriented program, the Center has made significant strides in bringing the technology, knowledge and applications of the spatial information technology field to the region it serves. Through the mission of the Center, the region's educational, economic development and work force communities have become increasingly educated to the benefits of spatial (Geospatial) technology, particularly in the region's K-12 arena. SlTC continues to positively affect the region's education, employment and economic development, while expanding its services and operations designed to be customer driven, growing infrastructure and affecting systemic change.

Flinton, Michael E.↗

Radio line and continuum observations of quasar-galaxy pairs and the origin of low reshift quasar absorption line systems

There are a number of known quasars for which our line of sight to the high redshift quasar passes within a few Holmberg radii of a low redshift galaxy. In a few of these cases, spectra of the quasar reveal absorption by gas associated with the low redshift galaxy. A number of these pairs imply absorption by gas which lies well outside the optical disk of the associated galaxy, leading to models of galaxies with 'halos' or 'disks' of gas extending to large radii. The authors present observations of 4 such pairs. In three of the four cases, they find that the associated galaxy is highly disturbed, typically due to a gravitational interaction with a companion galaxy, while in the fourth case the absorption can be explained by clouds in the optical disk of the associated galaxy. They are led to an alternative hypothesis concerning the origin of the low redshift absorption line systems: the absorption is by gas clouds which have been gravitationally stripped from the associated galaxy. These galaxies are rapidly evolving, and should not be used as examples of absorption by clouds in halos of field spirals. The authors conclude by considering the role extended gas in interacting systems plays in the origin of higher redshift quasar absorption line systems.

Carilli, C. L.↗

The Contribution of Ionizing Stars to the Far-Infrared and Radio Emission in the Galaxy

A summary of research activities carried out in this eighth and final progress report. The final report includes: this summary document, copies of three published research papers, plus a draft manuscript of a fourth research paper entitled "The Contribution of Ionizing Stars to the FarInfrared and Radio Emission in the Milky Way; Evidence for a Swept-up Shell and Diffuse Ionized Halo around the W4 Chimney/Supershell." The main activity during the final quarterly reporting period was research on W4, including analysis of the radio and far-infrared images, generation of shell models, a literature search, and preparation of a research manuscript. There will be additional consultation with co-authors prior to submission of the paper to the Astrophysical Journal. The results will be presented at the 4th Tetons Summer Conference on "Galactic Structure, Stars, and the ISM" in May 2000. In this fourth and last paper we show W4 has a swept-up partially ionized shell of gas and dust which is powered by the OCl 352 star cluster. Analysis shows there is dense interstellar material directly below the shell, evidence that that the lower W4 shell "ran into a brick wall" and stalled, whereas the upper W4 shell achieved "breakout" to form a Galactic chimney. An ionized halo is evidence of Lyman continuum leakage which ionizes the WIM (warm ionized medium). It has long been postulated that the strong winds and abundant ionizing photons from massive stars are responsible for much of the large scale structure in the interstellar medium (ISM), including the ISM in other galaxies. However standard HII region theory predicts few photons will escape the local HII region. The significance of W4 and this work is it provides a direct example of how stellar winds power a galactic chimney, which in turn leads to a low density cavity from which ionizing photons can escape to large distances to ionize the WIM.

Terebey, S.↗

Higher-order space-charge stability in anisotropic beams: Vlasov-Poisson derivation, refined dispersion relations, and stability charts

The Hofmann stability chart is used to screen working points in space-charge-dominated linacs. We identify two errors in its published higher-order dispersion relations: missing $(1\mp2\hatη^2/α)$ factors in the third-order $S^4$ coupling residues, and a sign error in the stated isotropic reduction of the fourth-order relation. Both corrections follow from Hofmann's Vlasov-Poisson equations without fitted parameters. They reproduce coherent tune-shift coefficients in the author's later monograph that the printed forms miss by 24% and 127%. Mode-resolved figures from a published application agree with the corrected relations and reject the printed forms, indicating an inconsistency between the 1998 equations and the calculations underlying those tested figures. We quantify the effect on the non-oscillatory stability chart. Inside the adopted $S^2\le10$ comparison domain, printed and corrected forms disagree on 0.73-2.11% of cells, with no preferred direction. Among excluded cells, disagreement reaches 22%, and the printed relation over-predicts instability at every sampled anisotropy. This concentration may help explain why the errors persisted, although it does not establish their historical cause. For PIP-II, the corrected chart flags four of thirty-two evaluable periods, including one on a third-order odd branch missed by a second-order screen. This count covers non-oscillatory modes only and remains conditional on an unresolved factor-five disagreement between two codes on transverse emittance growth.

Pathak, Abhishek [Fermilab] (ORCID:000000021704208↗

Some observations on four current subjects related to aeroelastic stability

After introductory comments on the literature and the purposes of this paper, a table is presented summarizing the author's views on some currently solved vs partially unsolved problems related to aeroelastic stability. The term 'solved' is used in the practical sense that engineers are able to cope confidently with that problem during the process of structural design. Selected entries in the table are reviewed, partially to motivate the topics in the rest of the paper. The 'four current subjects' are chosen both for timeliness and because they are among the ongoing interests of the Stanford group. The first involves the prediction of linearized unsteady aerodynamic loads due to arbitrary motions of streamlined shapes. Some contributions by Edwards are refined, which were motivated by the requirements of active control system design. The second subject is nonlinear unsteady aerodynamics for the transonic regime. After describing a few useful developments from locally-linear theory and computational fluid dynamics, there is suggested an empirical procedure for interim-analysis purposes. The third and fourth subjects concern recent discoveries regarding the aeroelastic stability of large-aspect-ratio wings and wind turbines. The former work is mainly that of Petre and Boyd. The latter includes some of the author's own preliminary discoveries about the performance and dynamics of vertical-axis machines.

Ashley, H.↗

Erratum: “History of atomic layer deposition and its relationship with the American Vacuum Society” [J. Vac. Sci. Technol. A 31, 050818 (2013)]

The authors of this review article published in 20131 would like to correct some text and references relating to the first observations and publications on molecular layering. In Sec. II, “Early Years of Atomic Layer Processes” in the original article,1 the first two sentences of the fourth paragraph should instead say “The ALD principle, where surface reactions follow a binary sequence of self-limiting half-reactions, was reported under the name ‘molecular layering’ in the 1960s by S. I. Kol’tsov from Leningrad Technological Institute.2–6 These experiments were conducted under the scientific supervision of V. B. Aleskovskii. The ‘framework hypothesis,’ an antecedent to molecular layering, was proposed by V. B. Aleskovskii in 1952.6” In addition, again in this same section and paragraph, the last two sentences should instead say “In the 1969 article,3 the authors report that the initial reaction between TiCl4 and Si–OH tends to involve 3 Si–OH, forming one Ti–Cl, whereas after the first water step, the second TiCl4 exposure reacts with 2 Ti–OH, forming Ti–Cl2 groups. In the 1969 paper,3 a planar thin film was not produced or evaluated, although nanolayers were prepared by molecular layering at that time.6” These corrections do not affect other sections or the conclusions drawn in the article.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of Acidic Gases and Aerosol Species Aboard the NASA DC-8 Aircraft During the Pacific Exploratory Mission in the Tropics (PEM-Tropics A)

We received funding to provide measurements of nitric acid (HNO3), formic acid (HCOOH), acetic acid (CH3COOH), and the chemical composition of aerosols aboard the NASA Ames DC-8 research aircraft during the PEM-Tropics A mission. These measurements were successfully completed and the final data resides in the electronic archive (ftp-gte.larc.nasa.gov) at NASA Langley Research Center. For the PEM-Tropics A mission the University of New Hampshire group was first author of four different manuscripts. Three of these have now appeared in the Journal of Geophysical Research-Atmospheres, included in the two section sections on PEM-Tropics A. The fourth manuscript has just recently been submitted to this same journal as a stand alone paper. All four of these papers are included in this report. The first paper (Influence of biomass combustion emissions on the distribution of acidic trace gases over the Southern Pacific basin during austral springtime) describes the large-scale distributions of HNO3, HCOOH, and CH3COOH. Arguments were presented to show, particularly in the middle tropospheric region, that biomass burning emissions from South America and Africa were a major source of acidic gases over the South Pacific basin. The second paper (Aerosol chemical composition and distribution during the Pacific Exploratory Mission (PEM) Tropics) covers the aerosol aspects of our measurement package. Compared to acidic gases, O3, and selected hydrocarbons, the aerosol chemistry showed little influence from biomass burning emissions. The data collected in the marine boundary layer showed a possible marine source of NH3 to the troposphere in equatorial areas. This source had been speculated on previously, but our data was the first collected from an airborne platform to show its large-scale features. The third paper (Constraints on the age and dilution of Pacific Exploratory Mission-Tropics biomass burning plumes from the natural radionuclide tracer Pb-210) utilized the unexpectedly high concentrations of Pb-210 in the combustion plumes to estimate their ages and mixing along the transport route to the South Pacific basin. The final paper in the group (Tropospheric reactive-odd nitrogen over the South Pacific in austral springtime). This paper provides a summary of reactive nitrogen during PEM-Tropics A, with HNO3 and PAM showing the most impact from combustion emission.

Talbot, Robert W.↗

ANDRA's Underground Research Laboratory in Bure: Major Role in the Cigeo Development - 20005

The Industrial Center for Geological Disposal, also called Cigeo, is the deep geological disposal facility project developed by Andra since 1991. It is intended for the final disposal of High-Level Waste (HLW) and Intermediate Level Waste-Long Lived (ILW-LL) generated in France by the nuclear industry. Cigeo is located in the east of France (Meuse/Haute-Marne site). The disposal will be implemented in a 140 to 160 m thick clay layer at about 500 m depth. The license application file will be submitted in 2020. If the license is granted, the construction of the pilot phase of Cigeo (ramp, shafts, drifts, initial disposal vaults) could start in 2025 at the earliest. Since 2000, the development of the safety case of Cigeo for post closure has been supported by a three-stage construction, design, and scientific and technological experiment program performed in the French Underground Research Laboratory (URL) in Bure. These stages of the URL activities supported the iterative interactions between the knowledge acquired by scientific and technological R and D program, the design process and the safety assessment. The stages focused on assessing the suitability of the disposal concept, providing the basis for safety options and construction design, and preparing for licensing using large scale demonstrations. Recently, Andra launched the fourth development stage of the URL to implement a new set of technological experiments aiming at consolidating the design options of disposal cells and galleries for the pilot phase of Cigeo and at assessing monitoring technologies. Recently, Andra launched the fourth development stage of the URL to implement a new set of technological experiments aiming at consolidating the design of the pilot phase of Cigeo and at assessing design options and monitoring technologies. Removal of a segment ring, construction of an X drift crossing, improved construction techniques for HLW vaults, and construction of an ILW-LL prototype disposal vault are example activities during the fourth phase. In the future, the URL in Bure will remain a unique location to carry out research on promising technical solutions, to reduce Cigeo's construction and operation risks and strengthen the long-term safety assessment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

On the origin of the solar system. I

The empirical information on protostars is reviewed. 'Globules' are described, found to have the typical range of stellar masses and with gaseous compositions now well known thanks largely to radio astronomy. They also contain particulate matter identified as silicates, ice, and probably graphite and other carbon compounds. Current knowledge of the degree of stability of the planetary orbits over the past 4.5 b.y. is summarized. The statistics on the frequency and masses of asteroids and information on the Kirkwood gaps, both empirical and theoretical, are cited. An analogous discussion is made for the Rings of Saturn, including its extension observed in 1966 to the fourth Saturn satellite, Dione. The three main classes of meteorites - irons, stones, and carbonaceous chondrites - all appear to be of asteroidal origin and they yield the most direct evidence on the early thermal history of the solar system. The author sees in this evidence definite confirmation of the cold origin of the planetary system, followed by a hot phase due to the evolving sun that caused the dissolution of the solar nebula.

Kuiper, G. P.↗

A phased workflow to define permit‐ready locations for large volume CO 2 injection and storage

Abstract To‐date, only two UIC Class VI permits have been issued by the US Environmental Protection Agency. We illustrate a four‐phase workflow to first identify regional storage resources and then down‐select sites to yield permit‐ready locations that can accept and store large volumes of CO 2 . Specific permit requirements should guide objectives and define deliverables of respective workflow phases. In the first phase we used available regional data and screened structure and injection zones to locate resources that match CO 2 volumes planned to be captured. Available data were also used to assess presence and depth of usable groundwater, the key resource being protected via permitting. We then used advanced, closed‐form, analytical solutions (EASiTool) to estimate CO 2 injectivity into each hydrologically connected injection compartment. In the second phase we acquired and conditioned additional wireline logs and leased available seismic datasets. We interpreted the depositional systems from wireline well‐log character and mapped sandbody geometry to interpolate injection and confining‐zone distribution. Using available data, we mapped faults and locations of freshwater and overpressure (or other capacity‐limiting geologic parameters) in more detail. In the third phase, we used the augmented geologic data to develop a static model for the selected area, extracted the areas of highest interest, and generated and ran dynamic (flow) models. In a fourth phase, we reduced major uncertainties identified in earlier phases. Our case study indicates that to complete preparation of a permit application requires (1) improved lithologic characterization information (thicknesses and horizontal and vertical connectivity) and (2) better definition of poorly defined local faults. © 2023 The Authors. Greenhouse Gases: Science and Technology published by Society of Chemical Industry and John Wiley & Sons Ltd.

58 GEOSCIENCES↗

Feasibility study for locating archaeological village sites by satellite remote sensing techniques

The author has identified the following significant results. Examination of NASA-provided aerial photography at the Pt. Hope, Alaska area has revealed numerous house pits, or the remains of former subterranean houses which have caved in. Although three major groupings of former house sites have previously been identified, a fourth area, north of the group known as Jabbertown had not previously been identified. It appears that this fourth site is quite extensive and may be of significance to understanding the sequence of habitation of the Pt. Hope location.

Cook, J. P.↗

ESPC ESA Webinar Series: ESPC ENABLE Contract Vehicle Overview

This webinar provides instructions and resources for financing distributed energy projects (e.g. on-site renewable energy, storage, and combined heat and power) using an energy savings performance contract (ESPC) energy sales agreement (ESA) through the U.S. Department of Energy's (DOE) ESPC ENABLE contract vehicle. The ESPC ENABLE contract vehicle is a streamlined procurement process that uses a standard investment grade audit tool and standard contract templates. Topics covered in the webinar include: An overview of the ESPC ENABLE contract vehicle; ESA-specific considerations for ENABLE contracts; and Case studies. This webinar also provides an overview of the resources available on the Federal Energy Management Program website, such as ESPC ENABLE templates. This webinar is the fourth of a series that provides information, best practices, and resources for implementing an ESPC ESA project. ESPC ESAs are a great option for federal sites that are motivated to reduce site costs, have no capital investment funding, and cannot use the U.S. Department of Defense 10 USC 2922a authority for long-term contracting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Safety [Vol. 34, No. 1, January-March 1993]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 1 An Integrated Regional Approach To Risk Management of Industrial Systems, S. Chakraborty and R. Stratton; 9 Annual Technical Meeting of the NRC Cooperative Severe Accident Research Program, E. G. Silver; ACCIDENT ANALYSIS: 13 Deterministic Severe Accident Criteria as Severe Accident Design Criteria and Policy for the New Production Reactor-Heavy Water Reactor, P. T. Rhoads; 20 Proposed Deterministic Severe Accident Criteria for the Heavy Water Reactor-New Production Reactor Containment, K. D. Bergeron, S. E. Slezak, and C. E. Leach; 33 Quasi-Static Core Liquid Level Depression and Long-Term Core Uncovery During a PWR LOCA, Y. Kukita, R. R. Schultz, H. Nakamura, and J. Katayama; 49 LIRA: An Advanced Containment System to Minimize the Accidental Radioactivity Releases, A. Turricchia; 63 Errata to “A Review of Hydrogen Production During Melt/Water Interaction in LWRs,” Vol. 33, No. 4; CONTROL AND INSTRUMENTATION: 64 The Nuplex 80+™ Advanced Control Complex from ABB Combustion Engineering, F. Ridolfo, D. Harmon, and K. Scarola; DESIGN FEATURES: 76 A Scheme for Passive Isolation of the Containment of a Reactor, A. K. Ghosh, V. V. Raj, and K. Kakodkar; 84 Utility Requirements for Safety in the Passive Advanced Light-Water Reactor, T. U. Marston, W. H. Layman, and G. Bockhold, Jr.; WASTE AND SPENT FUEL MANAGEMENT: 91 Activities Related to Waste and Spent Fuel Management, Compiled by M. D. Muhlheim and E. G. Silver; OPERATING EXPERIENCES: 103 Testing Deficiencies in Auxiliary Systems Feedwater Systems, J. D. Kueck; 110 Reactor Shutdown Experience, Compiled by J. W. Cletcher; 113 Selected Safety-Related Events, Compiled by G. A. Murphy; 115 Operating U.S. Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver; RECENT DEVELOPMENTS: 133 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 145 Reports, Standards, and Safety Guides, D. S. Queener; 150 Proposed Rule Changes as of Sept. 30, 1992; ANNOUNCEMENTS: 75 Harvard Short Course on Risk: Science, Assessment, and Management; 102 International Conference on Reactor Physics and Reactor Computations; 102 The Fourth International Conference on Nuclear Waste Reprocessing and Waste Management [RECOD ’94]; 132 International Symposium on the Radiological Exposure of the Population of the European Community from Radioactivity in the Mediterranean Sea [MARINA-MED]; 162 International High-Level Radioactive Waste Conference ‘Technology Integration—Above and Below”; 154 The Authors; 158 Indexes to Nuclear Safety, Volume 33.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nuclear Safety [Vol. 34, No. 1, January-March 1993]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 1 An Integrated Regional Approach To Risk Management of Industrial Systems, S. Chakraborty and R. Stratton; 9 Annual Technical Meeting of the NRC Cooperative Severe Accident Research Program, E. G. Silver; ACCIDENT ANALYSIS: 13 Deterministic Severe Accident Criteria as Severe Accident Design Criteria and Policy for the New Production Reactor-Heavy Water Reactor, P. T. Rhoads; 20 Proposed Deterministic Severe Accident Criteria for the Heavy Water Reactor-New Production Reactor Containment, K. D. Bergeron, S. E. Slezak, and C. E. Leach; 33 Quasi-Static Core Liquid Level Depression and Long-Term Core Uncovery During a PWR LOCA, Y. Kukita, R. R. Schultz, H. Nakamura, and J. Katayama; 49 LIRA: An Advanced Containment System to Minimize the Accidental Radioactivity Releases, A. Turricchia; 63 Errata to “A Review of Hydrogen Production During Melt/Water Interaction in LWRs,” Vol. 33, No. 4; CONTROL AND INSTRUMENTATION: 64 The Nuplex 80+™ Advanced Control Complex from ABB Combustion Engineering, F. Ridolfo, D. Harmon, and K. Scarola; DESIGN FEATURES: 76 A Scheme for Passive Isolation of the Containment of a Reactor, A. K. Ghosh, V. V. Raj, and K. Kakodkar; 84 Utility Requirements for Safety in the Passive Advanced Light-Water Reactor, T. U. Marston, W. H. Layman, and G. Bockhold, Jr.; WASTE AND SPENT FUEL MANAGEMENT: 91 Activities Related to Waste and Spent Fuel Management, Compiled by M. D. Muhlheim and E. G. Silver; OPERATING EXPERIENCES: 103 Testing Deficiencies in Auxiliary Systems Feedwater Systems, J. D. Kueck; 110 Reactor Shutdown Experience, Compiled by J. W. Cletcher; 113 Selected Safety-Related Events, Compiled by G. A. Murphy; 115 Operating U.S. Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver; RECENT DEVELOPMENTS: 133 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 145 Reports, Standards, and Safety Guides, D. S. Queener; 150 Proposed Rule Changes as of Sept. 30, 1992; ANNOUNCEMENTS: 75 Harvard Short Course on Risk: Science, Assessment, and Management; 102 International Conference on Reactor Physics and Reactor Computations; 102 The Fourth International Conference on Nuclear Waste Reprocessing and Waste Management [RECOD ’94]; 132 International Symposium on the Radiological Exposure of the Population of the European Community from Radioactivity in the Mediterranean Sea [MARINA-MED]; 162 International High-Level Radioactive Waste Conference ‘Technology Integration—Above and Below”; 154 The Authors; 158 Indexes to Nuclear Safety, Volume 33.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Technical Evaluation of the Department of Energy Research and Development Activities in Underground Research Laboratories - 20287

Congress created the U.S. Nuclear Waste Technical Review Board (NWTRB) in the 1987 Nuclear Waste Policy Amendments Act (Public Law 100-203) to evaluate the technical and scientific validity of activities undertaken by the Secretary of Energy to implement the Nuclear Waste Policy Act. Since 2012, DOE has collaborated in research conducted in several underground research laboratories (URLs) located in Europe and Asia. According to DOE, these international collaborations have been beneficial to its spent nuclear fuel (SNF) and high-level waste radioactive (HLW) disposal research program, particularly after the termination of the Yucca Mountain repository program when DOE began generic research on alternative host rocks (crystalline, clay, and salt) and repository environments very different from those at Yucca Mountain. In accordance with its mandate, the NWTRB is reviewing the DOE research and development (R and D) activities related to URLs. The NWTRB's review is documented in a report to Congress and the Secretary of Energy that will be released in January 2020, and this paper summarizes the NWTRB review and findings. The NWTRB held a fact-finding meeting with DOE and subsequently held a workshop on international URL collaborations in April of 2019. Based on the presentations and discussions at the workshop and at the fact-finding meeting, as well as information from reports published by DOE and others, there are four principal findings related to DoE's URL-related R and D activities. First, DOE participation in URL-related international research greatly benefits the U.S. geologic disposal R and D program by furthering its understanding of generic and site-specific disposal issues relevant to alternative repository host rocks and environments. DOE-funded R and D activities also are benefiting the URL-related research of other countries, especially in the area of complex analytical and numerical model/software development. Second, the more developed repository programs in other countries have focused on creating and strengthening their safety cases and making them transparent to the public. Repository programs in other countries use URLs to explain the technical bases underlying their safety cases, periodically reassess knowledge gaps and define new activities to strengthen the technical bases, and demonstrate the technology that will allow implementation of the proposed safety concept. Third, countries with more developed geologic disposal programs have found domestic URLs essential to their repository programs. DOE needs domestic URLs to advance geologic disposal efforts over the next decades and further its ability to train the next generation of scientists, engineers, and skilled technical workers. Fourth, DoE's international URL collaborations have advanced its generic disposal R and D program, including development of modeling capabilities recognized internationally as state-of-the-art, but further work on its coupled thermal-hydrological-mechanical-chemical models and URL- and laboratory-based research can strengthen its program. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Toward a Unified Parameterization of the Boundary Layer and Moist Convection: A New Type of Mass-Flux Model - Part 1

Higher-order closure (HOC) models have been proposed for parameterization of the turbulent planetary boundary layer (PBL). HOC models must include closures for higher-order moments (e.g., fourth moments in third-order closure models), for pressure terms, and for dissipation terms. Mass-flux closure (MFC) models have been proposed for parameterization of cumulus convection and, more recently, the convective PBL. MFC models include closures for lateral mass exchanges and for pressure terms (which are usually ignored). The authors developed a new kind of model that combines HOC and MFC, which they hope will be useful for the parameterization of both the PBL and cumulus convection, in a unified framework. Such a model is particularly well suited to regimes in which the PBL turbulence and the cumulus convection are not well separated, for example, the broken stratocumulus and shallow cumulus regimes. The model makes use of an assumed joint probability distribution for the variables of interest, and the equations typically used in HOC models can be derived by integrating over the distribution. Accordingly, the model is called Assumed-Distribution Higher-Order Closure (ADHOC). The prognostic variables of ADHOC are the mean state, the second and third moments of the vertical velocity, and the vertical fluxes of other quantities of interest. All of the parameters of the distribution can be determined from the predicted moments, thereafter the joint distribution is effectively known, and so any and all moments can be constructed as needed. In this way, the usual closure problem of "higher moments" is avoided. The pressure-term parameterizations previously developed for HOC models are used to predict the convective fluxes and the moments of the vertical velocity. In companion papers, parameterizations of lateral mass exchanges and subplume-scale fluxes are presented, and then ADHOC is applied to several observationally based tropical, subtropical, and dry convective boundary layers.

Lappen, Cara-Lyn↗

Nuclear Safety [Vol. 33, No. 4, October-December 1992]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 499 Technical Note: Nuclear Regulatory Commission’s Examination Question Bank System, C. L Jensen and N. L. Skinner; 506 Report on the Specialists’ Meeting on Passive and Active Safety Features of Liquid-Metal Fast Breeder Reactors Organized by the International Atomic Energy Agency at Oarai Engineering Centre of Power Reactor and Nuclear Development Corporation, Japan, November 5-7,1991, S. R. Paranjpe; ACCIDENT ANALYSIS: 514 A Review of Hydrogen Production During Melt/Water Interaction in LWRs, D. F. Fletcher, B. D. Turland, and S. P. A. Lawrence; 535 A Review of the U 3 0 8 -Al Reaction as a Potential Heat Source in Research and Test Reactor Accidents, J. L. Snelgrove; CONTROL AND INSTRUMENTATION: 543 Multilevel Interfaces for Power Plant Control Rooms II: A Preliminary Design Space, K. J. Vicente; DESIGN FEATURES: 549 Twenty-Second DOE/NRC Nuclear Air Cleaning and Treatment Conference, R. R. Bellamy, D. W. Moeller, and M. W. First; 562 Book Review: Safety Assessment of Unit 5 (WWER-440/W-213) of the Greifswald Nuclear Power Station, M. H. Fontana; WASTE AND SPENT FUEL MANAGEMENT: 576 Activities Related to Waste and Spent Fuel Management, M. D. Muhlheim and E. G. Silver; OPERATING EXPERIENCES: 586 Analysis of Corrective Actions Applied to Nuclear Power Plant Operations, A. E. Cross; 593 Reactor Shutdown Experience, Compiled by J. W. Cletcher; 596 Operating U.S. Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver; 609 Non-Commercial Power Operating Experience; 614 World Nuclear Performance, Compiled by M. D. Muhlheim; RECENT DEVELOPMENTS: 623 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 635 Reports, Standards, and Safety Guides, D. S. Queener; 639 Proposed Rule Changes as of June 30, 1992; ANNOUNCEMENTS: 513 Fourth International Conference on Nuclear Fuel Reprocessing and Waste Management RECOD '94; 585 International Topical Meeting on Advanced Reactors Safety; 622 International Workshop on Implementation of ALARA at Nuclear Power Plants; 648 Short Course on Nuclear Criticality Safety; 648 8th Topical Meeting on Problems in Reactor Physics MEPhi-VOLGA-93; 643 The Authors; 646 Reviewers of Nuclear Safety, Vol. 33

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗