Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fourier analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

A Fourier analysis for a fast simulation algorithm

This paper presents a derivation of compact expressions for the Fourier series analysis of the steady-state solution of a typical switching converter. The modeling procedure for the simulation and the steady-state solution is described, and some desirable traits for its matrix exponential subroutine are discussed. The Fourier analysis algorithm was tested on a phase-controlled parallel-loaded resonant converter, providing an experimental confirmation.

King, Roger J.↗
NASA NTRS1990

Fourier analysis of finite element preconditioned collocation schemes

The spectrum of the iteration operator of some finite element preconditioned Fourier collocation schemes is investigated. The first part of the paper analyses one-dimensional elliptic and hyperbolic model problems and the advection-diffusion equation. Analytical expressions of the eigenvalues are obtained with use of symbolic computation. The second part of the paper considers the set of one-dimensional differential equations resulting from Fourier analysis (in the tranverse direction) of the 2-D Stokes problem. All results agree with previous conclusions on the numerical efficiency of finite element preconditioning schemes.

Deville, Michel O.↗
DOE OSTI2012

Cutoff probe using Fourier analysis for electron density measurement

This paper proposes a new method for cutoff probe using a nanosecond impulse generator and an oscilloscope, instead of a network analyzer. The nanosecond impulse generator supplies a radiating signal of broadband frequency spectrum simultaneously without frequency sweeping, while frequency sweeping method is used by a network analyzer in a previous method. The transmission spectrum (S21) was obtained through a Fourier analysis of the transmitted impulse signal detected by the oscilloscope and was used to measure the electron density. The results showed that the transmission frequency spectrum and the electron density obtained with a new method are very close to those obtained with a previous method using a network analyzer. And also, only 15 ns long signal was necessary for spectrum reconstruction. These results were also compared to the Langmuir probe's measurements with satisfactory results. This method is expected to provide not only fast measurement of absolute electron density, but also function in other diagnostic situations where a network analyzer would be used (a hairpin probe and an impedance probe) by replacing the network analyzer with a nanosecond impulse generator and an oscilloscope.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Characterizing filamentary magnetic structures in counter-streaming plasmas by Fourier analysis of proton images

Proton imaging is a powerful tool for probing electromagnetic fields in a plasma, providing a path-integrated map of the field topology. However, in cases where the field structure is highly inhomogeneous, inferring spatial properties of the underlying field from proton images can be difficult. This problem is exemplified by recent experiments, which used proton imaging to probe the filamentary magnetic field structures produced by the Weibel instability in collisionless counterstreaming plasmas. In this paper, we perform analytical and numerical analyses of proton images of systems containing many magnetic filaments. We find that, in general, the features observed on proton images do not directly correspond to the spacing between magnetic filaments (the magnetic wavelength) as has previously been assumed and that they instead correspond to the filament size. Furthermore, we demonstrate this result by Fourier analysis of synthetic proton images for many randomized configurations of magnetic filaments. Our results help guide the interpretation of experimental proton images of filamentary magnetic structures in plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1984

Fourier analysis of polar cap electric field and current distributions

A theoretical study of high-latitude electric fields and currents, using analytic Fourier analysis methods, is conducted. A two-dimensional planar model of the ionosphere with an enhanced conductivity auroral belt and field-aligned currents at the edges is employed. Two separate topics are treated. A field-aligned current element near the cusp region of the polar cap is included to investigate the modifications to the convection pattern by the east-west component of the interplanetary magnetic field. It is shown that a sizable one-cell structure is induced near the cusp which diverts equipotential contours to the dawnside or duskside, depending on the sign of the cusp current. This produces characteristic dawn-dusk asymmetries to the electric field that have been previously observed over the polar cap. The second topic is concerned with the electric field configuration obtained in the limit of perfect shielding, where the field is totally excluded equatorward of the auroral oval. When realistic field-aligned current distributions are used, the result is to produce severely distorted, crescent-shaped equipotential contours over the cap. Exact, analytic formulae applicable to this case are also provided.

Barbosa, D. D.↗
NASA NTRS1977

Fourier analysis of planimetric lunar crater shape - Possible guide to impact history and lunar geology

If the lithology of lunar crust influences impact crater morphology, a method of analysis that is sensitive to small-scale changes in crater shape is required. In the present paper, it is shown that Fourier analysis in closed form can provide detailed information regarding planimetric crater shape. Preliminary analysis of the rim crest outline of 247 nearside lunar craters (larger than 18 km in diam) led to the following information: Imbrian and pre-Imbrian craters are more elongate than younger craters, possibly as a result of widespread crustal deformation early in the moon's history. Crater size does not affect the planimetric shape of craters. Highland craters are less circular than mare craters, probably due to the greater structural and lithologic complexity of the highland crust. Craters comprising each shape family of the eleventh harmonic typically are located in the same general geographic region of the moon.

Eppler, D. T.↗
DOE OSTI2020

Fourier Analysis Method for Wireless Power Transfer Coil Design

Wireless power transfer (WPT) systems for Electric Vehicles (EVs) are designed to meet specifications such as stray field, power transfer, efficiency, and ground clearance. Typical design approaches include iterative analysis of predetermined coil geometries to identify candidates that meet these constraints. This work instead directly generates WPT coil shapes and magnetic fields to meet specifications and constraints through the optimization of Fourier basis function coefficients. The proposed Fourier Analysis Method (FAM) applies to arbitrary planar coil geometries and does not rely on iterative finite-element analysis (FEA) simulations. This flexibility allows for rapid design evaluation across a larger range of coil geometries and design specifications. A prototype coil is built to compare FAM outputs to experimental measurements and FEA simulations. The FAM is then used to illustrate the tradeoff of coil current and stray field for a given power level showing that the method is capable of generating optimized coil shapes to meet arbitrary field constraints.

Foote, Andrew↗
NASA NTRS1986

Fourier analysis of the SOR iteration

The SOR iteration for solving linear systems of equations depends upon an overrelaxation factor omega. It is shown that for the standard model problem of Poisson's equation on a rectangle, the optimal omega and corresponding convergence rate can be rigorously obtained by Fourier analysis. The trick is to tilt the space-time grid so that the SOR stencil becomes symmetrical. The tilted grid also gives insight into the relation between convergence rates of several variants.

Leveque, R. J.↗
NASA NTRS1972

A simple Fourier analysis technique for measuring the dynamic response of manual control systems.

From a practical standpoint most dynamic response analysis techniques are complicated, expensive, and time consuming to mechanize and operate. Adaptive parameter tracking techniques partially overcome these faults, but they have prescribed forms which is an undesirable restriction for basic research. To overcome these drawbacks, an on-line Fourier analysis technique has been developed which deals only with the input and error signals in a manual feedback control system. Several sine waves are used for the input, and the on-line data measurement includes the error variance and a simple means for obtaining the sine and cosine transforms of the error signal at each of the input frequencies. From this relatively small amount of data, we show simple ways to compute the open- and closed-loop dynamic response at input frequencies and the relative amount of linearly correlated power in the error signal.

Allen, R. W.↗
DOE OSTI2016

Fourier Analysis of the Multilevel QD Method with {alpha}-Approximation For Time-Dependent Radiative Transfer Problems

Thermal radiation transfer (TRT) problems describe interaction of photon radiation with matter. They are defined by the time-dependent radiative transfer (RT) equation for the specific intensity I coupled with the energy balance (EB) equation. This class of problems is characterised by high dimensionality, multiple scales and strong nonlinearity. In this paper we analyze the multilevel quasi-diffusion (QD) method for solving TRT problems. This is a nonlinear method of moments with exact closures. The QD method enables one to reduce dimensionality of the original radiative transfer problem. It is formulated by a nonlinear system of equations consisting of (i) the high-order RT (HORT) equation for the intensity of photon radiation and (ii) low-order equations for the angular and energy moments of the intensity. The nonlinear closures are formulated by means of stable factors. The low-order problem brings the radiative transfer model to the level of multi-physics equations. The multilevel QD (MLQD) method possesses attractive features for efficient multi-physics coupling. To calculate the high-order RT solution we apply the {alpha}-approximation which assumes that the intensity changes exponentially in time over a time step. The {alpha}-approximation leads to the steady-state RT equation with a modified opacity and enables one to avoid storing the high-dimensional solution from the previous time step. The rate of change is evaluated by the solution of the time-dependent low-order QD (LOQD) equations for moments. We note that the HORT equation in the {alpha}-approximation contains an extra nonlinear term. It affects the iterative behaviour of the MLQD method. The obtained computational results indicated that the rate of convergence is slower compared to the rate when the time-dependent HORT is used to calculate the intensity. In this paper we perform an iterative stability analysis of the MLQD method in a discretized form and analyze convergence of outer (transport) iterations on a time step. We consider multigroup TRT problems in 1D slab geometry. The fully implicit scheme is used to discretize equations in time. The HORT equation is approximated with the method of step characteristics. A finite volume method is applied for spatial discretization of multigroup LOQD equations. The grey (one-group) LOQD equations are algebraically consistent with the multigroup LOQD equations. To perform Fourier analysis a model TRT problem in an infinite homogeneous medium is considered. The system of nonlinear equations of the MLQD method is linearized near an equilibrium solution at some given temperature. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Extraction of the Muon Revolution Frequency Distribution via the Fourier Analysis of the Fast Rotation Signal in the Muon g-2 Experiment

The Muon g-2 experiment at Fermi National Accelerator Laboratory aims to measure the anomalous magnetic moment a of the muon to an unprecedented precision of 0.14 ppm, obtaining a near four-fold increase in precision over the previous experiment at Brookhaven National Laboratory (BNL). The value of a from BNL diers from the Standard Model prediction by 3.4 standard deviations, suggesting a tantalizing hint of new physics and so motivating a new measurement. The Fermilab experiment follows the measurement principle from the BNL experiment. A beam of positive muons is stored in the ring, where a combination of magnetic and electric elds helps to focus the beam. The combination of these elds and the stored beam properties directly impact the nal extraction of of a. The muon anomaly relies on the measurement of the spin precession frequency !a about the momentum of the muon. Due to a muon beam momentum spread of approximately 0:1%, !a must be corrected for the eect of a radial electric eld. The correction is estimated by means of a modied Fourier analysis of the so-called fast rotation signal. We explore the application of this analysis to the case of a beam with longitudinal spread and to the case of late-time beam detection. We also consider the numerical extension of the method, and apply it to data from the recent commissioning run.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1990

Fourier Analysis Of Vibrations Of Round Structures

Fourier-series representation developed for analysis of vibrations in complicated, round structures like turbopump impellers. Method eliminates guesswork involved in characterization of shapes of vibrational modes. Easy way to characterize complicated modes, leading to determination of responsiveness of given mode to various forcing functions. Used in conjunction with finite-element numerical simulation of vibrational modes of structure.

Davis, Gary A.↗
DOE OSTI2014

Nonlinear Fourier analysis for discontinuous conductivities: Computational results

Two reconstruction methods of Electrical Impedance Tomography (EIT) are numerically compared for nonsmooth conductivities in the plane based on the use of complex geometrical optics (CGO) solutions to D-bar equations involving the global uniqueness proofs for Calderón problem exposed in Nachman (1996) [43] and Astala and Päivärinta (2006) [6]: the Astala–Päivärinta theory-based low-pass transport matrix method implemented in Astala et al. (2011) [3] and the shortcut method which considers ingredients of both theories. The latter method is formally similar to the Nachman theory-based regularized EIT reconstruction algorithm studied in Knudsen et al. (2009) [34] and several references from there. New numerical results are presented using parallel computation with size parameters larger than ever, leading mainly to two conclusions as follows. First, both methods can approximate piecewise constant conductivities better and better as the cutoff frequency increases, and there seems to be a Gibbs-like phenomenon producing ringing artifacts. Second, the transport matrix method loses accuracy away from a (freely chosen) pivot point located outside of the object to be studied, whereas the shortcut method produces reconstructions with more uniform quality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1991

A new finite element formulation for computational fluid dynamics. IX - Fourier analysis of space-time Galerkin/least-squares algorithms

A Fourier stability and accuracy analysis of the space-time Galerkin/least-squares method as applied to a time-dependent advective-diffusive model problem is presented. Two time discretizations are studied: a constant-in-time approximation and a linear-in-time approximation. Corresponding space-time predictor multi-corrector algorithms are also derived and studied. The behavior of the space-time algorithms is compared to algorithms based on semidiscrete formulations.

Shakib, Farzin↗
NASA NTRS1989

On the shape and albedo variegation of asteroids - Results from Fourier analysis of synthetic and observed asteroid lightcurves

Fourier analyses have been conducted of those asteroids in the Lagerkvist et al. (1987) lightcurves with substantially complete phase coverage and point density, and for which a unique period has been identified. Fourier coefficients are thereby obtained for 188 lightcurves of 91 asteroids, as well as for 868 synthetic lightcurves from a set of models different in shape and albedo markings; by comparing model and asteroid lightcurve coefficients, the possible shape and albedo variations for 18 asteroids are derived. An attempt is made to define the general distribution of shapes of all asteroid samples analyzed.

Barucci, M. Antonietta↗
DOE OSTI2015

FOURIER ANALYSIS OF BLAZAR VARIABILITY: KLEIN–NISHINA EFFECTS AND THE JET SCATTERING ENVIRONMENT

The strong variability of blazars can be characterized by power spectral densities (PSDs) and Fourier frequency-dependent time lags. In previous work, we created a new theoretical formalism for describing the PSDs and time lags produced via a combination of stochastic particle injection and emission via the synchrotron, synchrotron self-Compton, and external Compton (EC) processes. This formalism used the Thomson cross section and simple δ-function approximations to model the synchrotron and Compton emissivities. Here we expand upon this work, using the full Compton cross section and detailed and accurate emissivities. Our results indicate good agreement between the PSDs computed using the δ-function approximations and those computed using the accurate expressions, provided the observed photons are produced primarily by electrons with energies exceeding the lower limit of the injected particle population. Breaks are found in the PSDs at frequencies corresponding to the cooling timescales of the electrons primarily responsible for the observed emission, and the associated time lags are related to the difference in electron cooling timescales between the two energy channels, as expected. If the electron cooling timescales can be determined from the observed time lags and/or the observed EC PSDs, then one could in principle use the method developed here to determine the energy of the external seed photon source for EC, which is an important unsolved problem in blazar physics.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1993

Fourier analysis of numerical algorithms for the Maxwell equations

The Fourier method is used to analyze the dispersive, dissipative, and isotropy errors of various spatial and time discretizations applied to the Maxwell equations on multi-dimensional grids. Both Cartesian grids and non-Cartesian grids based on hexagons and tetradecahedra are studied and compared. The numerical errors are quantitatively determined in terms of phase speed, wave number, propagation direction, gridspacings, and CFL number. The study shows that centered schemes are more efficient than upwind schemes. The non-Cartesian grids yield superior isotropy and higher accuracy than the Cartesian ones. For the centered schemes, the staggered grids produce less errors than the unstaggered ones. A new unstaggered scheme which has all the best properties is introduced. The study also demonstrates that a proper choice of time discretization can reduce the overall numerical errors due to the spatial discretization.

Liu, Yen↗