Failure Analysis in FeCo Magnetic Alloys through Electron Channeling Contrast Imaging Defect Characterization.
Abstract not provided.
Deitz, Julia↗
SEARCH · Engineering Papers
Results for “FeCo”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The bonding of FeN2, FeCO, and Fe2N2 - Model systems for side-on bonding of CO and N2
Qualitative calculations are performed to elucidate the nature of the side-on interaction of both N2 and CO with a single Fe atom. The systems are found to be quite similar, with bonding leading to an increase in the CO or N2 bond length and a decrease in the vibrational frequency. The CO or N2 stretching modes lead to a large dipole derivative along the metal-ligand bond axis. The populations show an almost identical, large donation from the Fe 3d orbitals into the CO or N2 Pi-asterisk. The larger system Fe2N2 is then considered, with the N2 bridging the Fe2, both parallel and perpendicular to the Fe2 bond axis for two different Fe-Fe distances. For FeN2, the shift in the observed N2 frequency is smaller than observed for the alpha state of N2/Fe(111). The shift in the N2 vibrational frequency increases when the N2 interacts with two Fe atoms, either at the Fe-Fe nearest neighbor distance or at the first layer Fe-Fe distance, when the side-on N2 axis is oriented perpendicular to an Fe-Fe bond.
Bauschlicher, Charles W., Jr.↗
Additive roles of antiferromagnetically coupled elements in the magnetic proximity effect in the GdFeCo/Pt system
Abstract Interfacial magnetic interactions between different elements are the origin of various spin-transport phenomena in multi-elemental magnetic systems. We investigate the coupling between the magnetic moments of the rare-earth, transition-metal, and heavy-metal elements across the interface in a GdFeCo/Pt thin film, an archetype system to investigate ferrimagnetic spintronics. The Pt magnetic moments induced by the antiferromagnetically aligned FeCo and Gd moments are measured using element-resolved x-ray measurements. It is revealed that the proximity-induced Pt magnetic moments are always aligned parallel to the FeCo magnetic moments, even below the ferrimagnetic compensation temperature where FeCo has a smaller moment than Gd. This is understood by a theoretical model showing distinct effects of the rare-earth Gd 4 f and transition-metal FeCo 3 d magnetic moments on the Pt electronic states. In particular, the Gd and FeCo work in-phase to align the Pt moment in the same direction, despite their antiferromagnetic configuration. The unexpected additive roles of the two antiferromagnetically coupled elements exemplify the importance of detailed interactions among the constituent elements in understanding magnetic and spintronic properties of thin film systems.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Surface Engineering Strategy to Synthesize Bicomponent Carbons for Rechargeable Zinc-Air Batteries
Atomic Fe-N x moieties and nanosized FeCo species anchored on carbons have each been demonstrated to be among the most effective active components for oxygen reduction and evolution reactions (ORR/OER), respectively in rechargeable zinc -air batteries (ZABs). However, incorporating both of these components in a single catalyst presents a great challenge due to the trade-off in formation between them during hightemperature preparation. Herein, we integrate them into a bicomponent carbon through a surface engineering strategy. In this process, K 3 [Fe(CN) 6 ] is engineered on the surface of a precursor mixture consisting of polyaniline-coated graphene oxide and ZIF-67. This is followed by pyrolysis to produce the bicomponent carbon catalyst of FeCo nanoparticles modified carbon polyhedron (for accelerating the OER), supported on atomically dispersed Fe -N -doped carbon nanosheet (for boosting the ORR). The catalyst exhibits a small potential gap of 0.69 V for OER/ORR. In situ Raman spectroscopy demonstrates that spinel FeCo oxides may be responsible for OER. The use of this catalyst in ZABs achieves high power densities of 225 mW cm -2 in aqueous electrolyte and 164 mW cm -2 in solid-state electrolyte. Additionally, a small and stable voltage gap of 0.712 V at 10 mA cm -2 is maintained after 1035 discharge -charge cycles demonstrating the great application potential in energy devices.
An, Jia-Xing↗
High-Throughput Characterization of (Fe x Co 1–x ) 3 O 4 Thin-Film Composition Spreads
In this study, thin-film continuous composition spreads of Fe–Co–O were fabricated by reactive cosputtering from elemental Fe and Co targets in reactive Ar/O 2 atmosphere using deposition temperatures ranging from 300 to 700 °C. Fused silica and platinized Si/SiO 2 strips were used as substrates. Ti and Ta were investigated as adhesion layer for Pt and the fabrication of the Fe–Co–O films. The thin-film composition spreads were characterized by high-throughput electron-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscopy, scanning electron microscopy, and optical transmission spectroscopy. The Fe-content ranged from 28 to 72 at. %. The spinel phases Fe 2 CoO 4 and FeCo 2 O 4 could be synthesized and stabilized at all deposition temperatures with a continuous variation in spinel composition in between. The dependence of the film surface microstructure on the deposition temperature and the composition was mapped. Moreover, the band gap values, ranging from 2.41 eV for FeCo 2 O 4 to 2.74 eV for Fe 2 CoO 4 , show a continuous variation with the composition.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Epitaxial heterointerfacial electron bridge synchronizes oxygen evolution activity and stability on a layered double hydroxide surface
Scalable green hydrogen production via electrocatalytic water splitting is largely restricted by the insufficient activity and stability of oxygen evolution reaction (OER) catalysts at the anode. As a class of the most active OER catalysts in alkaline electrolyzers, the application of layered double hydroxides (LDHs) remains a main challenge owing to the unstable lattice oxygen dissolution due to the dominant lattice oxygen-involving OER mechanism during long-term operation. Herein, we found that using an epitaxial hetero-interfacing nickel hydroxide (namely Ni(OH) 2 ) as an electron bridge between an active FeCo LDH and Ni foam support to form an LDH*/NFO catalyst, the electronic storage capacity around the Fermi level (-0.5 to +0.5 eV, e-D FE ) sharply increases from 0.93 per cell to 1.51 per cell. Subsequently, we demonstrate that this high e-D FE enables ceaseless and fast power injection into the kinetic process of intermediate species conversion and inhibits lattice oxygen dissolution in the active FeCo LDH. Consequently, it demonstrated a low OER overpotential of 246 mV at a current density of 100 mA cm -2 and ultrahigh stability for up to 3500 hours with an ultraslow overpotential increase rate of 9.4 × 10 -3 mV h -1 . Therefore, we developed an epitaxial hetero-interfacial electron bridging strategy to synchronize the activity and stability of available catalysts for scalable green hydrogen production via electrocatalytic water splitting.
25 ENERGY STORAGE↗
Boosting CO2R Performance of Ag Electrocatalysts by Sulfur-Doped Carbon Support
We find that S-doped carbon support can boost the CO2 reduction (CO2R) performance of Ag electrocatalysts. Firstly, surface science enabled electrocatalysis showed that Ag supported on S-doped highly oriented pyrolytic graphite (HOPG), a model electrocatalyst, demonstrated 100% higher CO turnover frequency (TOFCO = 3.6 ± 0.2 CO/atomAg/s) than that supported on S-free HOPG (TOFCO = 1.8 ± 0.2 CO/atomAg/s). Computational modeling based on density functional theory (DFT) revealed a more stabilized *COOH intermediate on Ag supported on S-doped carbon and thus a more favorable energetic pathway of CO2-to-CO, consistent with experimental results from the model electrocatalysts studies. Finally, this proof of concept was translated to the synthesis of powder electrocatalyst with 2 wt% Ag supported on S-doped carbon black, demonstrating > 40-fold high CO mass activity than a commercial Ag cathode with steady FECO ~ 96% at 100 mA/cm2 for 50 hours of continuous operation in a gas diffusion electrode (GDE) electrolyzer. For comparison, 2 wt% Ag supported on carbon black without S- doping showed a maximum FECO ~ 70% at 100 mA/cm2. This work demonstrates a successful bottom-up design of CO2R electrocatalysts guided by surface science enabled electrocatalysis.
CO2 conversion↗
Migration and Precipitation of Platinum in Anion–Exchange Membrane Fuel Cells
Despite the recent progress in increasing the power generation of Anion-exchange membrane fuel cells (AEMFCs), their durability is still far lower than that of Proton exchange membrane fuel cells (PEMFCs). Using the complementary techniques of X-ray micro-computed tomography (CT), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) spectroscopy, we have identified Pt ion migration as an important factor to explain the decay in performance of AEMFCs. In alkaline media Pt+2 ions are easily formed which then either undergo dissolution into the carbon support or migrate to the membrane. In contrast to PEMFCs, where hydrogen cross over reduces the ions forming a vertical “Pt line” within the membrane, the ions in the AEM are trapped by charged groups within the membrane, leading to disintegration of the membrane and failure. Furthermore, diffusion of the metal components is still observed when the Pt/C of the cathode is substituted with a FeCo–N–C catalyst, but in this case the Fe and Co ions are not trapped within the membrane, but rather migrate into the anode, thereby increasing the stability of the membrane.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Migration and Precipitation of Platinum in Anion‐Exchange Membrane Fuel Cells
Abstract Despite the recent progress in increasing the power generation of Anion‐exchange membrane fuel cells (AEMFCs), their durability is still far lower than that of Proton exchange membrane fuel cells (PEMFCs). Using the complementary techniques of X‐ray micro‐computed tomography (CT), Scanning Electron Microscopy (SEM) and Energy Dispersive X‐ray (EDX) spectroscopy, we have identified Pt ion migration as an important factor to explain the decay in performance of AEMFCs. In alkaline media Pt +2 ions are easily formed which then either undergo dissolution into the carbon support or migrate to the membrane. In contrast to PEMFCs, where hydrogen cross over reduces the ions forming a vertical “Pt line” within the membrane, the ions in the AEM are trapped by charged groups within the membrane, leading to disintegration of the membrane and failure. Diffusion of the metal components is still observed when the Pt/C of the cathode is substituted with a FeCo−N−C catalyst, but in this case the Fe and Co ions are not trapped within the membrane, but rather migrate into the anode, thereby increasing the stability of the membrane.
Raut, Aniket↗
Ab Initio Modeling of fcc Fe-Co-Cr-Ni High Entropy Alloys with Full Composition Range
The Fe-Co-Cr-Ni quaternary system has been studied extensively in the past decade, not only because of the superior properties achieved like high tensile ductility and fracture toughness, but also it is the foundation for the development of FeCrCoNi-based HEAs. However, most of the investigations are mainly focusing on the equiatomic and semi-equiatomic compositions. The physical properties of non-equiatomic compositions are barely explored. In the current work, the ab initio approach is adopted to predict the lattice parameter, structure stabilities, elastic properties, and enthalpy of formations of fcc Fe-Cr-Co-Ni HEA single crystals with the special quasirandom structure (SQS) method. To expand the design of Fe-Co-Cr-Ni HEAs into a full composition range, the current simulations cover all the binaries, ternaries, and the whole quaternary system. The 2-D composition-property contour diagrams are created to show the physical properties in the ternary and quaternary systems. Furthermore, our investigation shows that the fcc alloys' lattice parameter increases with the addition of Fe and Cr and decreases with Ni and Co. In addition to the enthalpy of formation at o K, the shape distortion rate is proposed to be another essential parameter to evaluate crystal stability. The results show the addition of Cr would destabilize the fcc lattice and cause symmetry breaking. Finally, the result of Pugh’s ratio shows that most of the fcc alloys show ductile behavior (P > 1.75), especially for the alloys around Fe 3 Ni, FeCo, and Fe 2 NiCo (P > 2.5). The brittle behavior (P < 1.75) is located around Fe 3 Cr and Fe 2 CoCr. Meanwhile, Cr 2 NiCo and Cr 2 FeNiCo are considered promising compositions to be tried and verified experimentally because of the higher bulk modulus and moderate shear modulus.
36 MATERIALS SCIENCE↗
Experimental evaluation of the role of redox during glauconite-CO 2 -brine interactions
Greensands formations are globally abundant sedimentary rocks rich in Fe clays (typically glauconite) that commonly contain natural hydrocarbon accumulations and may be important reservoirs for geologic storage of anthropogenic CO 2 . Diagenesis in greensands is commonly accompanied by the conversion of primary glauconite to siderite (FeCO 3 ), a process that could be exploited for the permanent trapping of CO 2 . Importantly, siderite formation after glauconite requires that the mostly oxidized Fe in the primary Fe clay minerals is reduced during diagenetic interactions. Here, we explore the effect of solution redox state on the stability of glauconite in sandstones with implications for the diagenetic and/or engineered formation of siderite. We performed two flow-through experiments on intact, glauconite-rich sandstone cores at 150 °C and 150 bar. Both experiments employed a 1 mol NaCl/kg, 0.1 mol NaHCO 3 /kg solution charged with ~0.58 mol CO 2 /kg solution, but the redox state of the injected fluid was manipulated between experiments in order to compare glauconite reactivity and siderite saturation state at oxidizing and reducing end-member conditions. After reaction with the oxidizing (O 2 (aq) ≈ 6 μmol/kg) fluid, chemical and Mӧssbauer spectroscopic analyses indicate the production of Fe(III)-oxy/hydroxide minerals from glauconite, whereas, in the reducing (H 2 (aq) ≈ 5–40 mmol/kg) experiment, thermodynamic calculations and coupled chemical, mineralogical, and Mӧssbauer analyses suggest glauconite dissolution and precipitation of an Fe(II) mineral, likely siderite, and minor magnetite formation. These experimental results, along with thermodynamic calculations, confirm that solution redox state is the master variable dictating siderite formation in greensands.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Selectivity of tris complexation for Ni(II), Co(II), and Fe(II) and its effect on carbonate precipitation under alkaline conditions
Simultaneous critical element recovery and ex-situ carbon mineralization of low-grade ultramafic deposits have garnered increasing interest. Understanding the selectivity of metal complexing organic ligands for various divalent metals present in ultramafic rocks during carbonate mineralization is required to optimize this process. Here we evaluate 2-amino-2-(hydroxymethyl)-1,3-propanediol (i.e., Tris) as a model for bidentate ligands that bind divalent metals with both amine and alcohol groups in alkaline conditions (pH 8–10.5) at 25 °C and 80 °C in carbonate-buffered solutions. Protonated Tris forms a stronger complex with metal ions and is selective for trace metals with Ni(II) > Co(II) > Fe(II) during carbonate precipitation, with the rates decreasing but selectivity increasing at lower temperature and lower pH. At 25 °C, metastable amorphous hydrated carbonates form, regardless of the amount of Tris present or pH values. At 80 °C and pH 8, the Co and Fe carbonates that form are a mixture of rosasite-group minerals (Co 2 CO 3 (OH) 2 (H 2 O) and Fe 2 CO 3 (OH) 2 ) and pure carbonates (sphaerocobaltite: CoCO 3 and siderite: FeCO 3 ), with the latter more stabilized with increasing Tris concentration. In mixed metal solutions without Tris at 25 °C where Fe:Ni or Fe:Co is 2:1, Fe increases the rates of Ni or Co carbonate precipitation. However, with increasing Tris concentration the presence of Ni or Co inhibits Fe carbonate precipitation. At 80 °C without Tris, Ni or Co substitute into the iron chukanovite (Fe 2 CO 3 (OH) 2 ) lattice, increasing Ni or Co carbonate precipitation rates. Increasing Tris concentration only slightly inhibits Fe and Co precipitation, but slows Ni precipitation up to 10 times, with Fe progressively partitioning into more pure carbonate phases with distinct crystalline morphologies. These findings suggest bidentate amine-bearing ligands may be effective at Ni and Co recovery during carbon mineralization of Fe-bearing ultramafic deposits at relatively low temperatures and slightly alkaline pH.
54 ENVIRONMENTAL SCIENCES↗
Influence of manganese abundances on iron and arsenic solubility in rice paddy soils
Arsenic (As) mobilization in rice paddy soils under fluctuating redox conditions is influenced by the biogeochemical cycling of redox sensitive elements such as iron (Fe) and manganese (Mn). Arsenic mobility in paddy soils is highly variable, and the influence of Mn abundances and Mn/Fe ratios on As mobility in these soils have received little attention. In this contribution, we developed a complementary set of field and laboratory experiments designed to evaluate the impact of Mn on interconnected Fe and As solubilization in rice paddy soils experiencing wetting-drying cycles through controlled irrigation. Porewater monitoring and synchrotron-based imaging and spectroscopy of thin sections prepared from an Arkansas paddy soil confirmed that As release was primarily governed by reductive dissolution of Fe (oxy)hydroxide phases. Experiments with laboratory soil microcosms amended with the synthetic nanocrystalline Mn oxide, δ-MnO 2 , showed that higher initial Mn/Fe inhibited Fe and As mobilization into porewater relative to unamended soil by up to 95% and 45%, respectively. Geochemical modeling suggests that pH increases driven by microbial MnO 2 reduction, in conjunction with microbial Fe- and sulfate-reduction in carbonate-rich porewater, enhanced the precipitation of siderite (FeCO 3(s) ), mackinawite (FeS (s) ), and potentially a Mn(II) arsenate phase. These secondary mineral phases likely played a greater role in controlling As solubilization than the role of Mn as a redox buffer regulating the redox conditions in the flooded soils. Field and laboratory experiments showed that alternate wetting and drying approaches with a single dry-down can be effective at reducing dissolved As concentrations in porewater through the oxidation of Fe. Differences in soil Mn/Fe ratios had no clear impact on the effectiveness of dry-downs as a strategy to reduce As mobilization.
54 ENVIRONMENTAL SCIENCES↗
Carbonate Minerals and Dissimilatory Iron-Reducing Organisms Trigger Synergistic Abiotic and Biotic Chain Reactions under Elevated CO 2 Concentration
Increasing CO 2 emission has resulted in pressing climate and environmental issues. While abiotic and biotic processes mediating the fate of CO 2 have been studied separately, their interactions and combined effects have been poorly understood. To explore this knowledge gap, an iron-reducing organism, Orenia metallireducens, was cultured under 18 conditions that systematically varied in headspace CO 2 concentrations, ferric oxide loading, and dolomite (CaMg(CO 3 ) 2 ) availability. The results showed that abiotic and biotic processes interactively mediate CO 2 acidification and sequestration through "chain reactions", with pH being the dominant variable. Specifically, dolomite alleviated CO 2 stress on microbial activity, possibly via pH control that transforms the inhibitory CO 2 to the more benign bicarbonate species. The microbial iron reduction further impacted pH via the competition between proton (H + ) consumption during iron reduction and H + generation from oxidization of the organic substrate. Under Fe(III)-rich conditions, microbial iron reduction increased pH, driving dissolved CO 2 to form bicarbonate. Spectroscopic and microscopic analyses showed enhanced formation of siderite (FeCO 3 ) under elevated CO 2 , supporting its incorporation into solids. In conclusion, the results of these CO 2 -microbe-mineral experiments provide insights into the synergistic abiotic and biotic processes that alleviate CO 2 acidification and favor its sequestration, which can be instructive for practical applications (e.g., acidification remediation, CO 2 sequestration, and modeling of carbon flux).
54 ENVIRONMENTAL SCIENCES↗
Grain boundary widening controls siderite (FeCO3) replacement of limestone (CaCO3)
Abstract The microstructure of minerals and rocks can significantly alter reaction rates. This study focuses on identifying transport paths in low porosity rocks based on the hypothesis that grain boundary widening accelerates reactions in which one mineral is replaced by another (replacement reaction). We conducted a time series of replacement experiments of three limestones (CaCO 3 ) of different microstructures and solid impurity contents using FeCl 2 . Reacted solids were analyzed using chemical imaging, small angle X-ray and neutron scattering and Raman spectroscopy. In high porosity limestones replacement is reaction controlled and complete replacement was observed within 2 days. In low porosity limestones that contain 1–2% dolomite impurities and are dominated by grain boundaries, a reaction rim was observed whose width did not change with reaction time. Siderite (FeCO 3 ) nucleation was observed in all parts of the rock cores indicating the percolation of the solution throughout the complete core. Dolomite impurities were identified to act as nucleation sites leading to growth of crystals that exert force on the CaCO 3 grains. Widening of grain boundaries beyond what is expected based on dissolution and thermal grain expansion was observed in the low porosity marble containing dolomite impurities. This leads to a self-perpetuating cycle of grain boundary widening and reaction acceleration instead of reaction front propagation.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
CO 2 fixation into carbon nanofibres using electrochemical–thermochemical tandem catalysis
Carbon dioxide (CO 2 ) fixation into value-added solid carbon such as carbon nanofibres (CNF) for longer-term storage represents a promising avenue for achieving net-negative carbon emissions. However, directly converting CO 2 to CNF via thermocatalytic approaches faces thermodynamic constraints, while electrocatalytic methods typically lead to amorphous carbon with limited yields or require energy-intensive conditions (>720 °C). Here, we present an electrocatalytic-thermocatalytic tandem strategy for CNF production, which circumvents the aforementioned thermodynamic limitations by integrating the co-electrolysis of CO 2 and water into syngas (CO and H 2 ) with a subsequent thermochemical process at relatively mild conditions (370-450 °C, 1 atm), yielding CNF at a high production rate (average 2.5 g carbon g metals -1 h -1 ). Further, the optimal coordinated actions of FeCo alloy and extra metallic Co were ascertained to enhance the dissociative activation of syngas and favour the carbon-carbon bond formation to produce CNF. This tandem strategy opens a door to leverage renewable energy for decarbonizing CO 2 into valuable solid carbon products while producing renewable H 2 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Irradiation stability and induced ferromagnetism in a nanocrystalline CoCrCuFeNi highly-concentrated alloy
Thermodynamic instabilities driven by temperature and irradiation in a nanocrystalline highly-concentrated alloy promote the nucleation and growth of FeCo-rich “nanomagnets”.
36 MATERIALS SCIENCE↗
Functionally graded magnetic materials: a perspective to advance charged particle optics through compositional engineering
Additive manufacturing has ushered in a new paradigm of bottom-up materials-by-design of spatially non-uniform materials. Functionally graded materials have locally tailored compositions to provide optimized global properties and performance. In this letter, we propose an opportunity for the application of graded magnetic materials as lens elements for charged particle optics. A Hiperco50/Hymu80 (FeCo-2 V/Fe-80Ni-5Mo) graded magnetic alloy was successfully additively manufactured via Laser Directed Energy Deposition with spatially varying magnetic properties. The compositional gradient is then applied using computational simulations to demonstrate how a tailored material can enhance the magnetic performance of a critical, image-forming component of a transmission electron microscope.
36 MATERIALS SCIENCE↗