Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLOCCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Synthesis of Mn-intercalated layered titanate by exfoliation-flocculation approach and its efficient photocatalytic activity under visible-light

A novel Mn-intercalated layered titanate as highly active photocatalyst in visible-light region has been synthesized via a convenient and efficient exfoliation-flocculation approach with divalent Mn ions and monolayer titanate nanosheets. The 0.91 nm interlayer spacing of obtained photocatalyst is in accordance with the sum of the thickness of titanate nanosheet and the diameter of Mn ions. The yellow photocatalyst shows a spectral response in visible-light region and the calculated band gap is 2.59 eV. The photocatalytic performance of this material was evaluated by degradation and mineralization of an aqueous dye methylene blue under visible-light irradiation, and an enhanced photocatalytic activity in comparison with protonated titanate as well as the P25 TiO{sub 2} and N-doped TiO{sub 2} was obtained. Additionally, the layered structure is retained, no dye ions intercalating occurs during the photocatalysis process, and a {approx}90% photocatalytic activity can be remained after reusing 3 cycles. - Graphical abstract: Mn-intercalated layered titanate as a novel and efficient visible-light harvesting photocatalyst was synthesized via a convenient and efficient exfoliation-flocculation approach in a mild condition. Highlights: Black-Right-Pointing-Pointer Mn-intercalated titanate has been prepared by exfoliation-flocculation approach. Black-Right-Pointing-Pointer The as-prepared catalyst shows spectral response in the visible-light region. Black-Right-Pointing-Pointer Heat treatment at certain temperature enables formation of Mn-doped TiO{sub 2}. Black-Right-Pointing-Pointer Dye can be degradated effectively by the catalyst under visible light irradiation.

36 MATERIALS SCIENCE↗

Lipid engineering reveals regulatory roles for membrane fluidity in yeast flocculation and oxygen-limited growth

Cells modulate lipid metabolism in order to maintain membrane homeostasis. In this paper, we use a metabolic engineering approach to manipulate the stoichiometry of fatty acid unsaturation, a regulator of cell membrane fluidity, in Saccharomyces cerevisiae. Unexpectedly, reduced lipid unsaturation triggered cell-cell adhesion (flocculation), a phenomenon characteristic of industrial yeast but uncommon in laboratory strains. We find that ER lipid saturation sensors induce expression of FLO1 – encoding a cell wall polysaccharide binding protein – independently of its canonical regulator. In wild-type cells, Flo1p-dependent flocculation occurs under oxygen-limited growth, which reduces unsaturated lipid synthesis and thus serves as the environmental trigger for flocculation. Transcriptional analysis shows that FLO1 is one of the most highly induced genes in response to changes in lipid unsaturation, and that the set of membrane fluidity-sensitive genes is globally activated as part of the cell's long-term response to hypoxia during fermentation. Finally, our results show how the lipid homeostasis machinery of budding yeast is adapted to carry out a broad response to an environmental stimulus important in biotechnology.

47 OTHER INSTRUMENTATION↗

Flocculation and Sedimentation in Suspensions Using Ultrasonic Wave Reflection

This work was undertaken to help understand and interpret the ultrasonic wave reflection (UWR) response of portland cement paste as it transforms from a fluid-like suspension to a solid in the first hours after mixing. A high impact polystyrene buffer (delay line) was used to measure small changes in the P-wave and S-wave reflection coefficients. Two materials were studied: a non-hydrating colloidal alumina suspension whose microstructure was manipulated between dispersed and flocculated states by adjusting the pH, and a coarse silica suspension that readily sedimented. The S-wave reflection coefficient clearly distinguished between dispersed and flocculated states. Sedimentation of particles in dispersed suspensions was distinguished using the P-wave reflection coefficient. Based on these findings, the observed P- and S-wave responses from hydrating portland cement paste are interpreted in terms of flocculation and sedimentation processes.

36 MATERIALS SCIENCE↗

Influence of the Rheology Behavior of Water-Soluble Polyacrylamides and Their Efficiency of Flocculation

Organic polymers such as water-soluble polyacrylamides that are used as flocculants in solid–liquid separations, have their flocculation efficiency determined by the behavior of their macromolecules in solution. This behavior is affected by its intrinsic characteristics, especially the presence of ionic groups in its macromolecules. In this context, the present work aimed to characterize three water-soluble polyacrylamides. The effect of the intrinsic properties of each polymer on the behavior of the polymer chains in aqueous solution was compared in different environments. Beside this, the polymers behavior effect on the destabilization of particles was evaluated through kaolin particle aggregation studies. Viscosity results show that the conformation of the macromolecules in solution is altered according to the amount of ionized groups present. This variation, together with other factors such as the affinity with the kaolin particles and the excess of ions in solution, reflects in the flocculation efficiency of kaolin particles, in the flocs size and the flocs sedimentation rate. Graphic Abstract: .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Ti-based electrodes using Ti-salt flocculated sludge and their application in lithium-ion batteries

We report a simple strategy to synthesize the nanostructured TiO{sub 2} samples by a solid state reaction using Ti-salt flocculated sludge. The structure and morphology of the Ti-salt flocculated sludge, nanostructured TiO{sub 2} samples and pure commercial Aldrich TiO{sub 2} powder were characterized by powder X-ray diffraction and field emission scanning electron microscopy (FE-SEM). The electrochemical performances were evaluated in coin type cells. Nanostructured TiO{sub 2} samples, obtained by Ti-salt flocculated sludge shows a higher capacity and better cycling performances than pure commercial Aldrich TiO{sub 2} powder at the cutoff of 1.0–2.5 V especially at high current rate. The enhanced cycling performance can be attributed to the facts that their high crystallinity and uniform nano-sized distribution.

36 MATERIALS SCIENCE↗

Analyzing the cosmic web environment in the vicinity of grand-design and flocculent spirals with local geometric index

We explore the environment of a combined set of 367 grand-design and 619 flocculent spiral galaxies. We introduce a novel estimator called the local geometric index to quantify the morphology of the local environment of these 986 spirals. The local geometric index allows us to classify the environment of galaxies into voids, sheets, filaments, and clusters. We find that grand-designs are mostly located in dense environments like clusters and filaments (∼ 78%), whereas the fraction of the flocculents lying in sparse environments like voids and sheets is significantly higher (> 10%) than that of the grand-designs. A p-value < 10 -3 from a Kolmogorov-Smirnov test indicates that our results are statistically significant at 99.9% confidence level. Further, we note that dense environments with large tidal flows are dominated by the grand-designs. On the other hand, low-density environments such as sheets and voids favor the growth of flocculents.

79 ASTRONOMY AND ASTROPHYSICS↗

Partial flocculation for spray drying of spherical mixed metal oxide particles

Abstract Particles are an important design consideration for many proposed solar thermochemical water splitting reactor concepts. These particles must maintain physical integrity and chemical performance at very high temperatures (>900°C) while flowing within a system. Spray drying is a commonly used, scalable method to produce solid spherical particles that have the best opportunity to meet these requirements. Spray drying is used to produce hercynite (FeAl 2 O 4 ) particles using pH ‐modification of a charge‐stabilized sol. This process involves inducing partial flocculation in nanoparticle suspensions to yield larger particles that are spherical and structurally robust. A commercial boehmite suspension is characterized along with a mixture of the boehmite suspension with an iron oxide suspension. Zeta potential near zero and peak yield stress measurements at the same pH indicate flocculation, but associated sedimentation behavior is not observed. The behavior of both the boehmite‐only and mixed suspensions both seem to be driven by the behavior of the boehmite suspension alone. Spray dried particles from the mixed suspension at the critical pH gave significantly larger and more spherical particles, which also indicates flocculation. This relatively simple technique shows promise for new mixed‐metal material formulations and scalable applications.

Ehrhart, Brian D.↗

Amphiphilic Block Copolymers for Flocculation and Hydrophobization of Legacy Waste Suspensions in Flotation Driven Dewatering Operations

There exists a degrading legacy fuel pond at the Sellafield site (UK), known as the First-Generation Magnox Storage Pond (FGMSP). After being placed into a passive care and maintenance regime resulting in a long storage period, the fuel rods, primarily their cladding, corroded in the pond forming magnesium hydroxide based sludges and suspended material. These ponds are a grave concern to the British government in terms of hazard and risk reduction. Therefore, decommissioning of these ponds is a top priority beginning with the contaminant retrievals process [1]. The pond has accumulated significant quantities of waste materials amongst the skips of fuel, including but not limited to: large inventories of corroded Magnox sludge, fuel rod fragments, metal fragments (from fuel skips), concrete degradation products (from the pond infrastructure), wind-blown sand, and other materials such as bird guano and animal remains. This challenge requires a chemically robust technology to complete sludge retrievals [2]. As nuclear is different, a more stringent process operation criteria is required. From the criteria, flotation was selected as a viable technology. Flotation involves the application of collector molecules which modify the hydrophobicity of suspended particles allowing them to adsorb to rising bubbles. As some particles lack inertia for flotation due to their size, dual flocculant/collector agents can be deployed for greater particle recovery, in this case, amphiphilic diblock copolymers. Two copolymers of Poly(acrylic acid)-b-poly(n-butyl acrylate) (or PAA-b-PnBA), of different hydrophobic chain lengths (PBA) were synthesized for flotation campaigns. Flotation has shown promise to be a valuable rapid dewatering strategy for decommissioning of legacy waste ponds whilst upholding the required operational criteria. This research has shown: PAA-b-PnBA copolymers promote flocculation of Mg(OH){sub 2} particulates. Diblock copolymers retain more fluid than traditional surfactant based collectors wrt. relative particulate recovery performance- where longer PnBA chain length polymers performed best. Performance appears to be hydrodynamically limited due to over-flocculation of Mg(OH){sub 2}. Potential to combine with sedimentation for high particle recovery with low fluid carryover.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Selective Lead(II) Adsorption and Flocculation Characteristics of the Grafted Sodium Alginate: A Comparative Study

Synthesis of sodium alginate-g-poly(acrylamide-co-N-methylacrylamide) [S-III], sodium alginate-g-poly(N-methylacrylamide-co-N,N-dimethylacrylamide) [S-II], sodium alginate-g-poly(acrylamide-co-N,N-dimethylacrylamide) [S-I]. Sodium alginate-g-poly(N,N-dimethylacrylamide) [SAG-g-PDMA] and sodium alginate-g-poly(acrylamide) [SAG-g-PAM] were prepared by solution polymerization technique using potassium peroxydisulfate as the initiator at 70 °C in water medium. The graft copolymers were characterized by FTIR and NMR ({sup 1}H and {sup 13}C) spectroscopy, SEM and XRD studies. All the five graft copolymers were used to remove Pb(II) ions from the aqueous solution and also in flocculation studies of kaolin clay (1.0 wt%), silica (1.0 wt%) and iron ore slime (0.25 wt%) suspensions. A comparative studies of all the five graft copolymers were also made in both the two cases. The Pb(II) ion removal capacity of all the graft copolymers follows the order S-III > SAG-g-PAM > S-II > SAG-g-PDMA > S-I. But the flocculation performance of the graft copolymers follows the order S-II > S-I > S-III > SAG-g-PDMA > SAG-g-PAM. S-III was also used for the competitive metal ion removal with Hg(II), Cd(II), Cu(II) and Zn(II). Pb(II) adsorption of S-III (the best Pb(II) ion adsorber) follows pseudo second order rate equation and Langmuir adsorption isotherm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Treatment of Fat-Containing Wastewater Using Binary Flocculant Mixtures Based on Chitosan and Quaternary Salt of Poly(2-dimethylamino)ethyl Methacrylate

The flocculating capability of a mixture of chitosan and poly(2-dimethylamino)ethyl methacrylate) methyl sulfate quaternary salt in fat-containing waters was studied. A synergistic effect was determined that involves a significant increase in the degree of clarification and a simultaneous decrease in the fat and organic impurity contents compared with the use of individual flocculants. The prospects of using the studied mixture of similarly charged polyelectrolytes when treating actual sewage from a milk processing plant are described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Barless flocculent galaxies: a dynamic puzzle

We draw attention to the bright galaxies that do not show a bar in their structure but have a flocculent spiral structure. Using the THINGS and HERACLES kinematic data for four barless galaxies (NGC 2841, NGC 3512, NGC 5055, NGC 7331), we built their mass models including dark haloes. We concluded that the fraction of the dark matter does not exceed 50 per cent within the optical radii of the galaxies. This is too little to explain the lack of a bar in these galaxies. In an attempt to understand the featureless structure of these galaxies, we constructed several N-body models with an initially reduced content of dark matter. We concluded that, in addition to the low mass of the dark halo, the decisive factor that leads to a barless disc is the start from an initially unstable state. An isolated dynamically cold disc (with the Toomre parameter Q < 0.5) settled into rotational equilibrium passes through the short stage of violent instability with fragmentation and formation of stellar clumps. After that, it evolves passively and ends up with a featureless structure. We assume that the barless flocculent galaxies studied in this work may be descendants of galaxies at high redshifts with rotation curves that are consistent with the high mass fraction of baryons relative to the total dark matter halo.

79 ASTRONOMY AND ASTROPHYSICS↗

The Effect of Flocculent, Dispersants, and Binder on Wet-laid Process for Recycled Glass Fiber/PA6 Composite

The papermaking industry has been using the wet-laid process to suspend paper pulp-derived fibers in water and drain the solution through a forming mesh. This process has recently been adopted to produce non-woven, wet-laid fiber-reinforced polymer matrix composite mats. The mats can be postmolded into different complex shapes using compression molding or related processes. The objective of this study was to produce composite panels from wet-laid mats and observe the effect of chemicals used during the process on the mechanical and thermal characteristics of the resulting composite. Two sets of mats were processed using recycled glass fiber with Polyamide 6 (PA6). Flocculent, dispersant and binder (poly(vinyl alcohol) (PVOH)) were added to one of the mats, and the second mat was processed without these chemicals. The addition of these chemicals enhanced the fiber distribution and reduced processing defects in the mats. This was reflected in the mechanical properties of the final product. It was noticed that the flocculent, dispersant and binder volatilized during the compression molding step. Furthermore, the additives were found not to affect the thermal properties of the consolidated part.

36 MATERIALS SCIENCE↗

Flocculation and aggregation in a microgravity environment (FAME)

An experiment to study flocculation phenomena in the constrained microgravity environment of a space shuttle or space station is described. The small size and light weight experiment easily fits in a Spacelab Glovebox. Using an integrated fiber optic dynamic light scattering (DLS) system we obtain high precision particle size measurements from dispersions of colloidal particles within seconds, needs no onboard optical alignment, no index matching fluid, and offers sample mixing and shear melting capabilities to study aggregation (flocculation and coagulation) phenomena under both quiescent and controlled agitation conditions. The experimental system can easily be adapted for other microgravity experiments requiring the use of DLS. Preliminary results of ground-based study are reported.

Ansari, Rafat R.↗

Flocculation of model algae under shear.

We present results of molecular dynamics simulations of the flocculation of model algae particles under shear. We study the evolution of the cluster size distribution as well as the steady-state distribution as a function of shear rates and algae interaction parameters. Algal interactions are modeled through a DLVO-type potential, a combination of a HS colloid potential (Everaers) and a yukawa/colloid electrostatic potential. The effect of hydrodynamic interactions on aggregation is explored. Cluster strucuture is determined from the algae-algae radial distribution function as well as the structure factor. DLVO parameters including size, salt concentration, surface potential, initial volume fraction, etc. are varied to model different species of algae under a variety of environmental conditions.

59 BASIC BIOLOGICAL SCIENCES↗

Amphiphilic Block Copolymers for Flocculation and Hydrophobization of Legacy Waste Suspensions in Flotation Driven Dewatering Operations - 20162

Flotation has been effectively demonstrated as a low footprint, high efficiency separation process when utilising simple anionic surface modifying agents such as sodium dodecyl sulphate (SDS). These agents increase hydrophobicity to remove suspended cationic surface charged particulates such as Mg(OH){sub 2} from waste suspensions similar to those at British nuclear fuel management sites- where corrosion processes have degraded fuel cladding. The technology is advantageous as it could effectively be retrofitted into existing waste management facilities at nuclear waste management sites such Sellafield and Hanford as the simplicity (no moving parts) and size of this technology coupled with low cost of construction could be rapidly deployed to aid in risk and hazard reduction decommissioning operations with minimum impact to secondary waste generation. Previously, sodium dodecyl sulphate has been deployed as a collector agent to increase the hydrophobicity of Mg(OH){sub 2} suspended particles, achieving a maximum particulate extraction percentage of 93%. To achieve further particulate extraction, flotation performance has been determined to be a function of the hydrodynamic limitations extracting fine material (>20 μm). Fine particulates have been shown in the minerals industry to have an inability to overcome slipstreams created from rising bubbles in flotation cells, likely due to the low mass and thus momentum of the colloidal material, preventing interaction between the hydrophobized particles and air-water interfaces (bubbles). To combat this mass transfer resistance poly(acrylic acid)-block-poly(n-butyl acrylate) amphiphilic diblock copolymers were synthesised via reversible addition-fragmentation chain-transfer (RAFT) polymerisation. The anticipated mode of action of these polymers involves the hydrophilic poly(acrylic acid) block polymer acting as a flocculation agent to increase the mass of the aggregates, and the hydrophobic poly(n-butyl acrylate) modifies the hydrophobicity of the resulting flocs. The concentration of this polymer (termed a macro-collector) was varied and the change in particle size distribution of the particulate suspension was analysed using static light scattering. The flotation performance was then characterised by several methods including percentage particulate recovery, volume reduction factor and residual bulk particulate concentration. This was then benchmarked against the traditional surfactant collector agent SDS. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

GAS SURFACE DENSITY, STAR FORMATION RATE SURFACE DENSITY, AND THE MAXIMUM MASS OF YOUNG STAR CLUSTERS IN A DISK GALAXY. I. THE FLOCCULENT GALAXY M 33

We analyze the relationship between maximum cluster mass M{sub max} and surface densities of total gas ({Sigma}{sub gas}), molecular gas ({Sigma}{sub H{sub 2}}), and star formation rate ({Sigma}{sub SFR}) in the flocculent galaxy M 33, using published gas data and a catalog of more than 600 young star clusters in its disk. By comparing the radial distributions of gas and most massive cluster masses, we find that M{sub max}{proportional_to}{Sigma}{sup 4.7{+-}0.4}{sub gas}, M{sub max}{proportional_to}{Sigma}{sup 1.3{+-}0.1}{sub H{sub 2}}, and M{sub max}{proportional_to}{Sigma}{sup 1.0{+-}0.1}{sub SFR}. We rule out that these correlations result from the size of the sample; hence, the change of the maximum cluster mass must be due to physical causes.

79 ASTRONOMY AND ASTROPHYSICS↗

Surface Tension Estimates for Droplet Formation in Slurries with Low Concentrations of Hydrophobic Particles, Polymer Flocculants or Surface-Active Contaminants

In support of the K-Basin project, Pacific Northwest National Laboratory (PNNL) was requested to evaluate the appropriate surface tension value to use in models predicting the formation of droplets from spray leaks of K-Basin slurries. The specific issue was whether it was more appropriate to use the surface tension of pure water in model predictions for all plausible spray leaks or to use a lower value. The surface tension of K-Basin slurries is potentially affected not only by particles but by low concentrations of nonionic polyacrylamide flocculant and perhaps by contaminants with surfactant properties, which could decrease the surface tension below that of water. A lower surface tension value typically results in smaller droplets being formed with a larger fraction of droplets in the respirable size range, so using the higher surface tension value of pure water is not conservative and thus needs a strong technical basis.

36 MATERIALS SCIENCE↗

Electric field induced bacterial flocculation of Enteroaggregative Escherichia coli 042

A response of the aggregation dynamics of enteroaggregative Escherichia coli under low magnitude steady and oscillating electric fields is presented. The presence of uniform electric fields hampered microbial adhesion and biofilm formation on a transverse glass surface, but instead promoted the formation of flocs. Extremely heterogeneous distribution of live and dead cells was observed among the flocs. Moreover, floc formation was largely observed to be independent of the frequency of alternating electric fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗