Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extremism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Extreme Ultraviolet and Beyond Extreme Ultraviolet Lithography Using Amorphous Zeolitic Imidazolate Resists Deposited by Atomic/Molecular Layer Deposition

Amorphous zinc-imidazolate (aZnMIm) resists show potential to meet the demands for next-generation high-numerical aperture (high-NA) metal-containing extreme ultraviolet (EUV) resist materials, given their ease of deposition by atomic/molecular layer deposition (ALD/MLD) at thicknesses of 20 nm and below. Here, this study demonstrates that aZnMIm thin films, previously identified as high-resolution electron beam resists, can also function as negative-tone EUV photoresists. Water development achieves high sensitivity (5 mJ/cm 2 ) but leaves significant residue, while acetic acid development results in poor contrast. A hybrid approach─water followed by acetic acid─enables residue-free development with a sensitivity of 181 mJ/cm 2 . Dry development using 1,1,1,5,5,5-hexafluoroacetylacetone (hfacH) is also possible but shows lower sensitivity (375 mJ/cm 2 ) compared to wet development methods. EUV photoelectron spectroscopy (PES), reflectometry/EUV absorption, total electron yield (TEY), residual gas analysis (RGA), and time-of-flight secondary ion mass spectrometry (TOF-SIMS) were used to investigate the effects of EUV irradiation on aZnMIm resists. Reflectometry experiments reveal an aZnMIm EUV absorption coefficient of 6.2 μm –1 , while PES and TEY analyses show that, compared to poly(4-hydroxystyrene) (PHS), a polymer-based reference resist, aZnMIm emits more primary and secondary electrons but generates fewer slow electrons relative to its primary electron emission; its total electron yield is similar to that of poly(methyl methacrylate) (PMMA) resists. When exposed to EUV, aZnMIm predominantly outgasses H 2 , as determined by RGA. TOF-SIMS measurements demonstrate that high-dose EUV exposure only partially fragments the 2-methylimidazole (2MIm) organic linkers, unlike high-dose electron beam exposure, which is known to completely degrade them. Additionally, aZnMIm resists show promise for potential beyond EUV lithography (BEUVL) due to the presence of Zn, which provides higher sensitivity at a wavelength of 6.7 nm compared to other metal ions, such as Sn, that are currently used in the best-performing EUV metal–organic resists. TEY measurements demonstrate that aZnMIm emits nearly twice as many electrons as PHS at 6.7 nm. The BEUV TEY of aZnMIm also surpasses that of PMMA, poly(pentafluorostyrene), and poly(4-iodostyrene), with the latter two being known for their high EUV TEYs. This work provides insight into zeolitic imidazolate framework (ZIF)-based EUV and BEUV resists and highlights their potential for both wet and dry development.

lithography↗
DOE OSTI2024

Increasing extreme hourly precipitation risk for New York City after Hurricane Ida

The remnants of Hurricane Ida caused major damage and death in the United States on September 1st, 2021, and 11 people drowned in flooded basement apartments within New York City (NYC). It was catastrophic because the maximum hourly precipitation intensity, recorded as 3.47 inches (88.1 mm) per hour at Central Park, was unprecedentedly high for the NYC region. The stormwater infrastructure in NYC is built for 1.75 inches (44.5 mm) per hour, and so understanding the dynamic risk associated with Ida can inform city planning efforts for climate change’s impact on short duration extreme precipitation events. We contextualize this storm’s record-breaking hourly intensity within the historical record as well as project its risk in the near- to medium-term future using nonstationary stochastic models. These models are conditioned on average temperature (T avg ) and cooling degree day (CDD) projections from three climate models as a covariate, each with a SSP 126 and SSP 370 scenario. The likelihood of such a storm was slowly increasing even before Ida happened, but the projected aggregate reoccurrence risk of an event of Ida’s magnitude over time from the non-stationary models ranges from 4 to 52 times higher than the risk given by the stationary model. Using CDD as a covariate resulted in risks that were more than twice the magnitude than when using T avg . Presenting both covariates provides a broader envelope of uncertainty, which highlights the importance and nuances in the choice of a regionally appropriate covariate for non-stationary risk analysis.

Mossel, Carolien↗
DOE OSTI2020

Modeling Extreme Deformations in Lithium Ion Batteries

A simultaneously coupled modeling approach to study the electrochemical and thermal behavior of lithium-ion batteries under large mechanical deformation has been developed. The thermo-electrochemical pseudo-2D (P2D) battery model is coupled with a mechanical material model. Mechanical, thermal, and electrochemical models are implemented as user-defined sub-routines in the commercial multi-physics code LS-DYNA. The mechanical strain experienced by anode, cathode and separator results in thickness and porosity changes in each layer which in turn influences electrochemical behavior. The evolution of concentration profiles and cell potential are studied under different mechanical loading conditions. Internal short-circuits caused by mechanical deformation and corresponding physical behaviors are also elucidated. We discuss the competing effects of improved transport at higher temperature due to the internal short-circuit versus a drop in the effective ionic conductivity and electrolyte diffusivity due to mechanical deformation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Two-Dimensional Uranyl Borates: From Conventional to Extreme Synthetic Conditions: Two-Dimensional Uranyl Borates: From Conventional to Extreme Synthetic Conditions

A systematic investigation of uranyl borates under different synthetic conditions resulted in five new 2D compounds, namely, (H 3 O)[(UO 2 )(BO 3 )], Li[(UO 2 )(BO 3 )] · (H 2 O), α-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ], β-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] and K 2.5 [(UO 2 ) 5 (BO 3 ) 2 O 2.5 (OH) 1.5 ] · (H 2 O) 2.5 . (H 3 O)[(UO 2 )(BO 3 )] and Li[(UO 2 )(BO 3 )] · (H 2 O) were obtained from hydrothermal reactions at 220 °C using the same mineralizer. Both materials possess the uranophane sheet topology with different symmetry of the unit cells. In the structure of (H 3 O)[(UO 2 )(BO 3 )] and Li[(UO 2 )(BO 3 )] · (H 2 O), UO 7 pentagonal bipyramids share edges and vertexes with four BO 3 planar triangles. α-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] and β-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] are polytypes. α-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] was synthesized from a high-temperature solid-state reaction under ambient pressure; whereas β-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] was obtained from a high-temperature/high-pressure (HT/HP) reaction. Both structures have an identical anion topology, but β-K 4 [(UO 2 ) 5 (BO 3 ) 2 O 4 ] crystallizes in space group with higher symmetry. In K 2.5 [(UO 2 ) 5 (BO 3 ) 2 O 2.5 (OH) 1.5 ] · (H 2 O) 2.5 , which was obtained from a hydrothermal reaction, UO 7 polyhedra share vertexes and edges with two independent BO 3 triangles, forming the most complex uranyl borate layers among all five compounds. The different synthetic routes, novel topologies, thermal behavior and Raman spectra are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Engineering the cellulolytic extreme thermophile Caldicellulosiruptor bescii to reduce carboxylic acids to alcohols using plant biomass as the energy source

Abstract Caldicellulosiruptor bescii is the most thermophilic cellulolytic organism yet identified (Topt 78 °C). It grows on untreated plant biomass and has an established genetic system thereby making it a promising microbial platform for lignocellulose conversion to bio-products. Here, we investigated the ability of engineered C. bescii to generate alcohols from carboxylic acids. Expression of aldehyde ferredoxin oxidoreductase (aor from Pyrococcus furiosus) and alcohol dehydrogenase (adhA from Thermoanaerobacter sp. X514) enabled C. bescii to generate ethanol from crystalline cellulose and from biomass by reducing the acetate produced by fermentation. Deletion of lactate dehydrogenase in a strain expressing the AOR–Adh pathway increased ethanol production. Engineered strains also converted exogenously supplied organic acids (isobutyrate and n-caproate) to the corresponding alcohol (isobutanol and hexanol) using both crystalline cellulose and switchgrass as sources of reductant for alcohol production. This is the first instance of an acid to alcohol conversion pathway in a cellulolytic microbe.

Biotechnology & Applied Microbiology↗
DOE OSTI2022

Recovery of MOF-5 from Extreme High-Pressure Conditions Facilitated by a Modern Pressure Transmitting Medium

Here mechanisms underlying the mechanically induced amorphization of metal-organic frameworks (MOFs) are of current interest, and both high-pressure experimentation and molecular dynamics simulations have been used to reveal the fundamentals of load bearing, deformation, and pressure-induced amorphization (PIA) in these highly porous materials. Unfortunately, MOFs are typically highly susceptibility to amorphization, which limits the conditions under which they can be processed and used. However, their flexible structures can be stabilized to high pressures by incorporating guest species into the framework matrix. In this study, a large molecule pressure transmitting medium (DAPHNE 7575 ) is used as a structure-fortifying guest species to stabilize the prototypical MOF -5 to ultra-high pressures ( >9 GPa) and enable the recovery of crystalline material upon decompression. Structural changes associated with the penetration of the pressure transmitting medium on compression are examined using a combination of high pressure synchrotron powder diffraction and molecular dynamics simulations. This work enhances the understanding of PIA in MOFs while showcasing a potential route for the stabilization of MOFs to surprisingly high-pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Extreme matter meets extreme gravity: Ultraheavy neutron stars with phase transitions

The speed of sound of the matter within neutron stars may contain nonsmooth structure related to first- or higher-order phase transitions. Here we investigate what are the observable consequences of structure in the speed of sound, such as bumps, spikes, step functions, plateaus, and kinks. One of the main consequences is the possibility of ultraheavy neutron stars (with masses larger than 2.5 solar masses), mass twins in heavy (with masses larger than 2 solar masses) and ultraheavy neutron stars. These stars pass all observational and theoretical constraints, including those imposed by recent LIGO/Virgo gravitational-wave observations and NICER x-ray observations. Here we thoroughly investigate other consequences of this structure in the speed of sound to develop an understanding of how nonsmooth features affect astrophysical observables, such as stellar radii, tidal deformability, moment of inertia, and Love number. Our results have important implications for future gravitational wave and x-ray observations of neutron stars and their impact in nuclear astrophysics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Techno-economic Analysis of Novel PV Plant Designs for Extreme Cost Reductions

A techno-economic analysis is underway examining the cost and performance of future large-scale photovoltaic (PV) plant components, including bifacial modules, tandem modules, increased plant voltage architectures, and module-level power electronics. Integration of these components into PV plant designs is compared with current PV technologies based on levelized cost of electricity (LCOE). Baseline models are developed and validated against recorded PV plant performance data. Expected cost and performance data of future PV technologies are incorporated into the baseline models. An evolutionary algorithm is utilized to optimize PV plant configuration, technology combination, and LCOE. Furthermore, this paper focuses on the bifacial module analysis.

14 SOLAR ENERGY↗
DOE OSTI2021

Online data analysis and reduction: An important co-design motif for extreme-scale computers

A growing disparity between supercomputer computation speeds and I/O rates means that it is rapidly becoming infeasible to analyze supercomputer application output only after that output has been written to a file system. Instead, data-generating applications must run concurrently with data reduction and/or analysis operations, with which they exchange information via high-speed methods such as interprocess communications. The resulting parallel computing motif, online data analysis and reduction (ODAR), has important implications for both application and HPC systems design. Here we introduce the ODAR motif and its co-design concerns, describe a co-design process for identifying and addressing those concerns, present tools that assist in the co-design process, and present case studies to illustrate the use of the process and tools in practical settings.

Data Analysis↗
DOE OSTI2021

Characterization of Extremes and Compound Impacts: Applications of Machine Learning and Interpretable Neural Networks

Focal Area: This white paper responds to Focal area III by exploring data fusion, learning and explainable AI methods in characterizing hydrological extremes and interconnections. It also addresses Focal area II by using probabilistic AI and ensemble ML for predicting extremes and compound extremes. Science Challenge: A key question associated with the integrated water (or hydrological) cycle grand challenge in the Earth and Environmental Systems Sciences Division (EESSD) strategic plan, is how the frequency and intensity of hydrological events will change. Prediction of the tail behavior (extremes) of the hydrological cycle is especially challenging, because of their stochasticity and low probability. These extreme events and their compound impacts have significant societal and economic consequences. It is anticipated for the next-generation Earth System models (ESMs), that model predictability of the water cycle will improve with increased resolution (e.g., regionally refined E3SM), advanced software and computational architectures, and improved model physics based on the data from ARM measurements and high-fidelity models. However, the challenges for predictability of low-probability high-impact extreme events will unlikely be alleviated with conventional modeling and data-driven approaches, as ESMs are calibrated largely for capturing the high-frequency mean climate states. Recent AI and ML applications have shown great potential in quantifying well-defined climate extremes (e.g., supervised learning of tropical cyclones/atmospheric rivers by ClimateNet1) but few efforts are dedicated to compound events, extreme drivers and uncertainty estimation. We envision the opportunity to develop and apply ML and interpretable AI methods extended on the existing efforts, specifically, for: (1) identification of compound extremes, (2) diagnosing drivers of extremes, (3) bias correction in extreme predictions and (4) probabilistic modeling of extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Carbon cycle extremes accelerate weakening of the land carbon sink in the late 21st century

Increasing surface temperature could lead to enhanced evaporation, reduced soil moisture availability, and more frequent droughts and heat waves. The spatiotemporal co-occurrence of such effects further drives extreme anomalies in vegetation productivity and net land carbon storage. However, the impacts of climate change on extremes in net biospheric production (NBP) over longer time periods are unknown. Using the percentile threshold on the probability distribution curve of NBP anomalies, we computed negative and positive extremes in NBP. Here we show that due to climate warming, about 88% of global regions will experience a larger magnitude of negative NBP extremes than positive NBP extremes toward the end of 2100, which accelerate the weakening of the land carbon sink. Our analysis indicates the frequency of negative extremes associated with declines in biospheric productivity was larger than positive extremes, especially in the tropics. While the overall impact of warming at high latitudes is expected to increase plant productivity and carbon uptake, high-temperature anomalies increasingly induce negative NBP extremes toward the end of the 21st century. Using regression analysis, we found soil moisture anomalies to be the most dominant individual driver of NBP extremes. The compound effect of hotness, dryness, and fire caused extremes at more than 50% of the total grid cells. The larger proportion of negative NBP extremes raises a concern about whether the Earth is capable of increasing vegetation production with a growing human population and rising demand for plant material for food, fiber, fuel, and building materials. The increasing proportion of negative NBP extremes highlights the consequences not only of reduction in total carbon uptake capacity but also of conversion of land to a carbon source.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A worldwide climatology of extreme air masses

Extreme temperature events are among the most damaging weather phenomena. In a warming world, more heat extremes and fewer cold extremes are expected in most regions in the future, a trade-off that warrants further understanding of such events. Here, we track and analyze large, persistent areas of hot and cold extreme temperatures in parallel, relative to the location and time of year, to quantify overall regional exposure to extreme temperatures. To accomplish this, we compare the frequencies, movements, trends, and sources/sinks in each type of extreme air mass, calling them extreme cold or extreme hot air masses (ECAMs/EHAMs). For most land regions, ECAMs occur more often than EHAMs, and ECAMs are more common in each hemisphere’s winter, when cold-air advection is strongest and most widespread. Average movement of ECAMs has a stronger equatorward component in winter than in summer, while movement of EHAMs is eastward all year, with less meridional movement than ECAMs. EHAMs have become more common almost everywhere on land, and the reverse is true for ECAMs, with the strongest trends in the northern hemisphere occurring in autumn, especially in the Arctic. The number of EHAMs around the world is increasing at a higher rate (+ 2.32 events/year) than ECAM numbers are decreasing (-1.27 events/year), causing a net increase in extremes, especially in some midlatitude regions. These results help to document the different processes driving hot and cold extremes, and thus the asymmetric and regionally varying trends in frequency for extreme air masses.

Ryan, James M↗
DOE OSTI2020

A review of SWAT applications, performance and future needs for simulation of hydro-climatic extremes

Hydro-climatic extremes, such as droughts and floods, have most likely increased due to climatic change and could lead to severe impacts on socio-economic, structural and environmental sectors. With nearly 4000 publications, the Soil and Water Assessment Tool (SWAT) is clearly one of the most extensively used ecohydrological models worldwide. The model has been widely used for projecting the impacts of future hydro-climatic changes, but application for extreme streamflow conditions is still rarely reported. To date, SWAT application reviews have focused on compilations of SWAT studies for specific or relatively new applications such as eco-hydrological modelling, ecosystem services, sub-daily simulations, and pesticide fate and transport simulations. However, no existing SWAT review studies have focused on simulation of hydro-climatic extremes. Furthermore, this research aims to bridge this gap by compiling and reviewing the findings of studies reporting SWAT hydro-climatic extremes including highlighting the performance and future research needs. A total of 111 articles have been identified since 1999; most of these studies were conducted in the United States and China. These articles can be divided into extreme flow assessments, drought studies, flood studies, drought and flood studies, SWAT coupling with other models, and SWAT improvements. Most of the extreme performance assessment studies reported “satisfactory ”performance, with a particular emphasis on peak flow comparisons. Future research needs regarding this topic include: (1) a unified SWAT extreme performance assessment framework; (2) SWAT improvements that result in improved replication of peak and low flows; (3) reliability assessment of global and satellite products for SWAT extreme simulations; (4) bias correction of CMIP6 and regional climate projections; (5) comparison of SWAT + and SWAT for extreme flow simulations in different types of basins; (6) development of an extreme flow module within an overall SWAT modelling system; and (7) integration of artificial intelligence within SWAT modelling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Characterizing Long Island’s Extreme Precipitation and Its Relationship to Tropical Cyclones

Since extreme precipitation impacts society on small scales (i.e., a few kilometers and smaller, it is worthwhile to explore extreme precipitation trends in localized regions, such as Long Island (LI), New York. Its coastal location makes it vulnerable to various extreme events, such as tropical cyclones (TCs). This work aimed to quantify the extreme precipitation events on LI that are caused by TCs, as well as the percentage of TCs passing close to LI that cause extreme precipitation events. Both gauge-based and satellite-based precipitation datasets of varying resolutions (DAYMET, IMERG, and CPC) were used to understand the impact of dataset selection. Results are shown for the common time period of 2001–2020, as well as the full time periods of each dataset. DAYMET shows the highest percentage of extreme precipitation events linked to TCs for 2001–2020 (a maximum of 7.2%) and the highest number of TCs that caused extreme precipitation events (36.5%), with IMERG showing similar results. For the full and common time periods, the highest percentage of extreme precipitation events caused by TCs was found in eastern LI. TC-related extreme precipitation averaged over LI varied year to year, and amounts were dependent on the resolution of the observational dataset, but most datasets showed an increasing trend in the last 19 years that is larger than the trend in mean precipitation. Current infrastructure in the region is likely inadequately prepared for future impacts from TC-related extreme precipitation events in such a population-dense region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Trends and meteorological drivers of extreme daily reservoir evaporation events in the western United States

Extreme daily evaporation from reservoir surfaces can lead to significant short-term water losses, affecting water quality, water supply, and reservoir operation strategies. Historical trends in daily reservoir evaporation events have eluded the scientific and operational communities, largely due to a lack of long-term, consistent data record. This study quantifies trends in extreme daily reservoir evaporation events at 165 major reservoirs located in the western U.S. Here, we use the place-based energy balance and aerodynamic Daily Lake Evaporation Model (DLEM) driven by multiple meteorological data products (RTMA, gridMET, Daymet) to estimate daily evaporation rates at these reservoirs from 1981 to 2022. The results—while are based on different meteorological forcing datasets—consistently indicate that the California, Lower Colorado, and Rio Grande hydrologic regions are more prone to higher daily evaporation extremes. Compared to the rest of western U.S, these three regions also experience a more pronounced increasing trend in the annual maximum daily evaporation rate, at about 0.3 mm day -1 decade -1 during 1981-2022. The results show that heat and dryness are the main drivers to the increasing trend of extreme evaporation, while extreme wind speed is the primary contributor to exceptionally high daily evaporation events across all regions. This phenomenon is particularly prominent in the arid Lower Colorado region, but less significant in the cold and humid Pacific Northwest region. We also find that the correlation between extreme wind speed and extreme evaporation degrades as the time scale increases from daily, to monthly and seasonal. Our findings have strong implications for the pattern and distribution of extreme evaporation events at the western U.S. reservoirs, and illustrate how various drivers influence extreme evaporation across different time scales.

13 HYDRO ENERGY↗