Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exploding Bridgewire Detonator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

27 records · Page 2

Methods for proving the equivalency of detonator performance

One of the challenges facing engineers is developing newer, safer detonators that are equivalent to devices currently in use. There is no clear consensus on an exact method for drawing equivalence of detonators. This paper summarizes our current efforts to develop diagnostics addressing various aspects of detonator design to better quantify and prove equivalency. We consider various optical techniques to quantify the output pressure and output wave shape. The development of a unique interpretation of streak camera breakouts, known as the apparent center of initiation, will be discussed as a metric for detonation wave shape. Specific examples apply these techniques to the comparison of a new laser-driven detonator with an existing exploding bridgewire (EBW) detonator. Successes and short-comings of the techniques will be discussed.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Detonator Bridgewire Gap Tests Using SE-1/31 Detonator Housings with High Surface Area PETN

The purpose of this work is to develop a basis for addressing broken and damaged bridgewires in exploding bridgewire (EBW) detonators and their vulnerability to electrostatic discharge (ESD) sources. Parameters such as gap width, breakdown voltage, charge voltage, and source energy are explored. We are interested in understanding how bridgewire gap length affects the detonator initiability and safety.

42 ENGINEERING↗

On the Use of an ER-213 Detonator to Establish a Baseline for the ER-486

This report documents a series of tests using a TSD-115 fireset coupled with an ER-213, a gold exploding bridgewire (EBW) detonator. These tests were designed to fire this EBW with a smaller fireset to obtain current and voltage data as well as timing information at voltage levels below, above, and throughout the threshold firing region. This study could then create a database for comparison to our current ER-486 EBW development, which is designed to be a lower voltage (<500V) device.

42 ENGINEERING↗

Assessing Detonator Health Using Rogowski Coil Data

The Rogowski coil is commonly employed to measure rapid changes of electrical currents, especially in high power applications. Here we report the use of the coil to reveal subtle details of exploding bridgewire (EBW) detonator initiation and how the initiation is affected by aging. Detonator accelerated aging studies are aimed at understanding aging mechanisms and enabling predictive capabilities for aging. Rogowski Coil data from detonator accelerated aging studies offer a wealth of information regarding the electrical health of detonator, which is an important and complementary part of a comprehensive accelerated aging study. Herein we present the results of a variety of accelerated aging tests in detonators (thermal cycling, low power current damage, etc.) and the results that the Rogowski Coil affords us and how they inform us about the condition of the detonator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laboratory measurements of shock propagation through spherical cavities in an optically accessible polymer

Surrogate laboratory experiments were conducted to understand how cavities surrounding an explosive event in a bounded material influence the transfer of energy to the surface of the material. Exploding bridgewires were detonated in a cavity that had been created in an optically accessible polymer material. The shock propagation was investigated through five paths, three through spherical cavities of varying size filled with air, one without a cavity and one in air. Shock propagation was imaged using the schlieren technique. The path effects were determined by measuring energy at the polymer surface using a pressure sensor. All cavities were successful at reducing the peak pressure nearly 100% from the case without a cavity, a reduction close to air. The degree of reduction was not uniform over all frequencies. Overall, our findings suggest that cavities influence both the amount and frequency content of the energy transfer from source to surface.

36 MATERIALS SCIENCE↗

Analysis of Experimental Shock Propagation through a Diverse Set of Geometric Cavities Embedded in Lab-Scale Polymer Cubes

Experiments were designed and conducted to investigate the impact that geometric cavities have on the transfer of energy from an embedded explosion to the surface of the physical domain. The experimental domains were fabricated as 3-inch polymer cubes, with varying cavity geometries centered in the cubes. The energy transfer, represented as a shock wave, was generated by the detonation of an exploding bridgewire at the center of the cavity. The shock propagation was tracked by schlieren imaging through the optically accessible polymer. The magnitude of energy transferred to the surface was recorded by an array of pressure sensors. A minimum of five experimental runs were conducted for each cavity geometry and statistical results were developed and compared. Results demonstrated the decoupling effect that geometric cavities produce on the energy field at the surface.

36 MATERIALS SCIENCE↗

Time-resolved nanosecond optical pyrometry of the vapor to plasma transitions in exploding bridgewires

Electrically exploded wires find uses throughout high-energy physics. For example, they are commonly used as high-temperature sources, X-ray generators, and in precision timing detonators. However, the detailed and complete physics that occurs is complex and still poorly understood. A full mechanistic description of these complex phenomena is beyond the scope of a single paper. Instead, we focus on the formation of metal vapor and its transition to plasma. This single transition is commonly assumed to comprise “bridge-burst”. We use a suite of diagnostics including a novel, fiber-based, high-speed, optical pyrometer to better characterize this transition. The primary finding from this project is that peak light output from an exploding wire does not temporally match the peak temperature. Additionally, it is found that peak light does not align with peak bridge-burst voltage and that the peak temperature is not voltage-dependent. These findings are non-intuitive and will allow for the correction of false assumptions previously made about this topic.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The effects of electrically exploding gold bridgewires into inert and explosive powder beds

Abstract The particle velocity created in beds of both low-density inert sugar and explosive PETN as a function of distance from an exploding bridgewire was measured using optical velocimetry and a silvered PMMA window. As expected, more violent bridge-bursts (from a greater-stored-energy capacitive discharge unit) resulted in greater particle velocities and a better supported compaction wave in sugar. In all cases, ramp waves, not shocks, were observed in the inert sugar. Large window velocities were observed for very powerful bursts (up to 270 m/s), but bursts required for stochastic detonator operation conditions resulted in sugar/PMMA window velocities of only 8–10 m/s 0.85 mm from the bridge location. In contrast, after a distance of only 0.65 mm, a building shock wave was observed in PETN under both threshold and reliable firing conditions. Subsequently a hot-spot-driven shock-to-detonation (SDT) process was observed prior to full detonation. The measured buildup process accounts for $$\approx $$ ≈ 66% of the so-called excess transit time (ETT) between the observed and theoretical total function time for the particular exploding-bridge-wire (EBW) detonator studied. The remainder must occur in the powerful output pellet region. In contrast to a common understanding, the ETT is found to be a weak function of the discharge energy. Thus, the operation of the detonator after a bridge-burst energy-to-powder reaction transition process is found to be hot-spot-driven SDT in both the low- and high-density pellets.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗