Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Eulerian model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Comprehensive modeling of turbulent particulate flows using Eulerian and Lagrangian schemes

This paper addresses turbulent particle dispersion and modulation effects in dilute gas-particle turbulent flows using the Eulerian and Lagrangian modeling approaches. Gradient diffusion approximations are employed in the Eulerian formulation, while a stochastic procedure is utilized to simulate turbulent dispersion in the Lagrangian formulation. The k-epsilon turbulence model is used to characterize the time and length scales of the continuous phase turbulence. For the particle size and loading considered, the turbulence transport equations must be modified to account for the modulation effects. Models are proposed for both Eulerian and Lagrangian schemes. Comparisons and predictions are made in fully developed gas-solid pipe flow and confined coaxial jets laden with particles. For the monodispersed system investigated, Eulerian approach is less expensive and gives more consistent results than the Lagrangian approach. The Lagrangian technique should be further developed to eliminate current inherent inconsistencies especially with regard to the symmetry boundary condition.

Adeniji-Fashola, A.↗

The NASA Eulerian Snow on Sea Ice Model (NESOSIM) v1.0: initial model development and analysis

The NASA Eulerian Snow On Sea Ice Model (NESOSIM) is a new, open-source snow budget model that is currentlyconfigured to produce daily estimates of the depth and density of snow on sea ice across the Arctic Ocean throughthe accumulation season. NESOSIM has been developed in a three-dimensional Eulerian framework and includes two(vertical) snow layers and several simple parameterizations (accumulation, wind packing, advection_divergence, blowingsnow lost to leads) to represent key sources and sinks of snow on sea ice. The model is forced with daily inputs of snowfall and near-surface winds (from reanalyses), sea ice concentration (from satellite passive microwave data) and sea ice drift (from satellite feature tracking) during the accumulation season (August through April). In this study, we present the NESOSIM formulation, calibration efforts, sensitivity studies and validation efforts across an Arctic Ocean domain (100 km horizontal resolution). The simulated snow depth and density are calibrated with in situ data collected on drifting ice stations during the 1980s. NESOSIM shows strong agreement with the in situ seasonal cycles of snow depth and density, and shows good (moderate) agreement with the regional snow depth (density) distributions. NESOSIM is run for a contemporary period (2000 to 2015), with the results showing strong sensitivity to the reanalysis derived snowfall forcing data, with the Modern-Era Retrospective analysis for Research and Applications (MERRA) and the Japanese Meteorological Agency 55-year reanalysis (JRA-55) forced snow depths generally higher than ERA-Interim,and the Arctic System Reanalysis (ASR) generally lower. We also generate and force NESOSIM with a consensus "median" daily snowfall dataset from these reanalyses.The results are compared against snow depth estimates derived from NASA's Operation IceBridge (OIB) snow radar data from 2009 to 2015, showing moderate_strong correlations and root mean squared errors of 10 cm depending on the OIB snow depth product analyzed, similar to the comparisons between OIB snow depths and the commonly used modified Warren snow depth climatology. Potential improvements to this initial NESOSIM formulation are discussed in the hopes of improving the accuracy and reliability of these simulated snow depths and densities.

Petty, Alek A.↗

Assessment of Turbulence-Chemistry Interaction Models in the National Combustion Code (NCC) - Part I

This paper describes the implementations of the linear-eddy model (LEM) and an Eulerian FDF/PDF model in the National Combustion Code (NCC) for the simulation of turbulent combustion. The impacts of these two models, along with the so called laminar chemistry model, are then illustrated via the preliminary results from two combustion systems: a nine-element gas fueled combustor and a single-element liquid fueled combustor.

Wey, Thomas Changju↗

Efficiency of shear induced entrainment in convectively mixed layers

Lidar data of mixed layer height are used to compare the model of process partitioning to that of Eulerian partitioning. It is found that the Eulerian partitioning model more closely follows the data and that the process partitioning model underpredicts the mixed layer depth. The results suggest that shear production and consumption of turbulent kinetic energy at the mixed layer top are local processes.

Boers, Reinout↗

Ignition-and-Growth Modeling of NASA Standard Detonator and a Linear Shaped Charge

The main objective of this study is to quantitatively investigate the ignition and shock sensitivity of NASA Standard Detonator (NSD) and the shock wave propagation of a linear shaped charge (LSC) after being shocked by NSD flyer plate. This combined explosive train was modeled as a coupled Arbitrary Lagrangian-Eulerian (ALE) model with LS-DYNA hydro code. An ignition-and-growth (I&G) reactive model based on unreacted and reacted Jones-Wilkins-Lee (JWL) equations of state was used to simulate the shock initiation. Various NSD-to-LSC stand-off distances were analyzed to calculate the shock initiation (or failure to initiate) and detonation wave propagation along the shaped charge. Simulation results were verified by experimental data which included VISAR tests for NSD flyer plate velocity measurement and an aluminum target severance test for LSC performance verification. Parameters used for the analysis were obtained from various published data or by using CHEETAH thermo-chemical code.

Oguz, Sirri↗

Modeling of confined turbulent fluid-particle flows using Eulerian and Lagrangian schemes

Two important aspects of fluid-particulate interaction in dilute gas-particle turbulent flows (the turbulent particle dispersion and the turbulence modulation effects) are addressed, using the Eulerian and Lagrangian modeling approaches to describe the particulate phase. Gradient-diffusion approximations are employed in the Eulerian formulation, while a stochastic procedure is utilized to simulate turbulent dispersion in the Lagrangina formulation. The k-epsilon turbulence model is used to characterize the time and length scales of the continuous phase turbulence. Models proposed for both schemes are used to predict turbulent fully-developed gas-solid vertical pipe flow with reasonable accuracy.

Adeniji-Fashola, A.↗

Gas-Granular Simulation Framework for Spacecraft Landing Plume-Surface Interaction and Debris Transport Analysis

The Gas-Granular Flow Solver (GGFS) multi-phase flow computational framework has been developed to enable simulations of particle flows complex extra-terrestrial regolith materials. Particle flows of interest include the damage of unprepared landing sites from rocket plume impingement on Moon, Mars, and asteroids. The flow solver implements an Eulerian-Eulerian two-fluid model with fluid representation of the gas phase and granular phase to avoid the need to model billions of particle interactions. The granular phase is modeled as an Eulerian fluid with constituent physics closure models derived from first-principle Discrete Element Model (DEM) particle interaction simulations that capture the complex, non-linear granular particle interaction effects. Granular phase constituent models have been developed and integrated that address the complex, non-linear granular material mechanics complexities resulting from both: the irregular, jagged particle shapes and poly-disperse mixture effects encountered in extra-terrestrial regolith, with lunar regolith as the extreme. The GGFS capabilities are being integrated into a proven NASA plume-surface interaction and debris transport simulation framework featuring the Loci/CHEM CFD program and Debris Transport Analysis (DTA) post-processing tools for applications in robotic and human Moon and Mars lander development. Integration of the three simulation tool components. Loci/CHEM, GGFS, and DTA, into a coordinated simulation framework will enable time-accurate spacecraft landing simulations that account for the alteration of the landing surface through plume-induced cratering and the resulting redirection of plume impingement flow and debris transport. Initial implementation of this simulation framework and application examples will be presented.

Liever, Peter A.↗

Cirrus clouds. I - A cirrus cloud model. II - Numerical experiments on the formation and maintenance of cirrus

A simplified cirrus cloud model is presented which may be used to investigate the role of various physical processes in the life cycle of a cirrus cloud. The model is a two-dimensional, time-dependent, Eulerian numerical model where the focus is on cloud-scale processes. Parametrizations are developed to account for phase changes of water, radiative processes, and the effects of microphysical structure on the vertical flux of ice water. The results of a simulation of a thin cirrostratus cloud are given. The results of numerical experiments performed with the model are described in order to demonstrate the important role of cloud-scale processes in determining the cloud properties maintained in response to larger scale forcing. The effects of microphysical composition and radiative processes are considered, as well as their interaction with thermodynamic and dynamic processes within the cloud. It is shown that cirrus clouds operate in an entirely different manner than liquid phase stratiform clouds.

Starr, D. OC.↗

Lagrangian mixed layer modeling of the western equatorial Pacific

Processes that control the upper ocean thermohaline structure in the western equatorial Pacific are examined using a Lagrangian mixed layer model. The one-dimensional bulk mixed layer model of Garwood (1977) is integrated along the trajectories derived from a nonlinear 1 1/2 layer reduced gravity model forced with actual wind fields. The Global Precipitation Climatology Project (GPCP) data are used to estimate surface freshwater fluxes for the mixed layer model. The wind stress data which forced the 1 1/2 layer model are used for the mixed layer model. The model was run for the period 1987-1988. This simple model is able to simulate the isothermal layer below the mixed layer in the western Pacific warm pool and its variation. The subduction mechanism hypothesized by Lukas and Lindstrom (1991) is evident in the model results. During periods of strong South Equatorial Current, the warm and salty mixed layer waters in the central Pacific are subducted below the fresh shallow mixed layer in the western Pacific. However, this subduction mechanism is not evident when upwelling Rossby waves reach the western equatorial Pacific or when a prominent deepening of the mixed layer occurs in the western equatorial Pacific or when a prominent deepening of the mixed layer occurs in the western equatorial Pacific due to episodes of strong wind and light precipitation associated with the El Nino-Southern Oscillation. Comparison of the results between the Lagrangian mixed layer model and a locally forced Eulerian mixed layer model indicated that horizontal advection of salty waters from the central Pacific strongly affects the upper ocean salinity variation in the western Pacific, and that this advection is necessary to maintain the upper ocean thermohaline structure in this region.

Shinoda, Toshiaki↗

Numerical Modeling of Transport of Biomass Burning Emissions on South America

Our research efforts have addressed theoretical and numerical modeling of sources emissions and transport processes of trace gases and aerosols emitted by biomass burning on the central of Brazil and Amazon basin. For this effort we coupled all Eulerian transport model with the mesoscale atmospheric model RAMS (Regional Atmospheric Modeling System).

RibeirodeFreitas, Saulo↗

Impact of Land Surface Heterogeneity on Mesoscale Atmospheric Dispersion

Prior numerical modelling studies show that atmospheric dispersion is sensitive to surface heterogeneities, but past studies do not consider the impact of a realistic distribution of surface heterogeneities on mesoscale atmospheric dispersion. While these focussed on dispersion in the convective boundary layer, the present work also considers dispersion in the nocturnal boundary layer and above. Using a Lagrangian particle dispersion model (LPDM) coupled to the Eulerian Regional Atmospheric Modeling System (RAMS), the impact of topographic, vegetation, and soil moisture heterogeneities on daytime and nighttime atmospheric dispersion is examined. In addition, the sensitivity to the use of Moderate Resolution Imaging Spectroradiometer (MODIS)-derived spatial distributions of vegetation characteristics on atmospheric dispersion is also studied. The impact of vegetation and terrain heterogeneities on atmospheric dispersion is strongly modulated by soil moisture, with the nature of dispersion switching from non-Gaussian to near- Gaussian behaviour for wetter soils (fraction of saturation soil moisture content exceeding 40%). For drier soil moisture conditions, vegetation heterogeneity produces differential heating and the formation of mesoscale circulation patterns that are primarily responsible for non-Gaussian dispersion patterns. Nighttime dispersion is very sensitive to topographic, vegetation, soil moisture, and soil type heterogeneity and is distinctly non-Gaussian for heterogeneous land-surface conditions. Sensitivity studies show that soil type and vegetation heterogeneities have the most dramatic impact on atmospheric dispersion. To provide more skillful dispersion calculations, we recommend the utilisation of satellite-derived vegetation characteristics coupled with data assimilation techniques that constrain soil-vegetation-atmosphere transfer (SVAT) models to generate realistic spatial distributions of surface energy fluxes.

Wu, Yuling↗

A middle and upper tropospheric cloud model

The interplay of the various physical processes involved in the formation, maintenance, and decay of middle and upper tropospheric stratiform clouds is discussed. Ice phase fair weather cloud forms are considered. Simulations of cirriform clouds which attempt to incorporate the physical processes in an interactive manner were performed. A two dimensional time dependent Eulerian numerical model, which incorporates all of the important physical processes in a simplified way, is employed to investigate the role of these processes in the evolution of a cloud in an isolated atmospheric layer. Physical parameters considered are the eddy viscosity and the thermal, water vapor, and ice water eddy diffusivities.

Source record↗

Impact mechanics of the Cretaceous-Tertiary extinction bolide

An examination of the mechanics of asteroidal, cometary, and meteor swarm impact on the earth determined if the enrichment of projectile material in the K-T layer is consistent with melts and impact breccias on the earth and moon, the size of the impacters, the distribution of the kinetic energy, and the sequence of impacts that could give rise to observed extinction phenomena. Flows resulting from spherical projectile impacts onto layers of air, water, and silicates were modeled and Eulerian finite difference algorithms were employed to solve conservation equations and equations of state. A range of speeds and impacter densities were considered, along with sizes from 0.17 km, which would be consumed in the atmosphere, to a 10 km object, which would have had a diameter greater than a reference 7.1 km atmosphere depth. It is concluded that an impact of the K-T bolide could result in global biotic extinction and worldwide material deposition.

Okeefe, J. D.↗

New Stratospheric Dust Belt Due to the Chelyabinsk Bolide

The Ozone Mapping Profiler Suite (OMPS) Limb Profiler (LP) on the recently launched NASA/NOAA NPP/ Suomi satellite detected aerosol excess in the midstratosphere (25-45 km altitude) between 50degN and 70degN latitudes. OMPS/LP observations trace this aerosol plume to the meteor that struck near Chelyabinsk, Russia on 15 February 2013. This new dust layer, located above the Junge aerosol layer, has persisted over at least a 3 month period. Material collected on the ground following the bolide explosion showed that the meteor was mostly composed of olivine and pyroxenes. Simulations using Lagrangian and Eulerian atmospheric models trace the plume back to Chelyabinsk and confirm that the plume altitude was at altitudes between 25 and 45 km. The models also confirm the plume circumpolar longitudinal spreading observed by OMPS/LP, with propagation speeds up to 85 m/s.

Stratospheric aerosol↗

Some Eulerian and Lagrangian diagnostics for a model stratospheric warming

The Eliassen-Palm (EP) cross sections for the model are discussed. EP cross sections conveniently display the principal eddy fluxes of heat, momentum, and quasi-geostrophic potential vorticity on one diagram. The EP diagnostics are used to follow the evolution of the mean flow through into the second stage of the model warming, which includes the reversal of the polar westerlies and which appears to have more in common with observed warmings. The transformed Eulerian-mean equations presented by Andrews and McIntyre (1976, 1978) provide the basis for an investigation in which an especially clear picture of the warming dynamics is obtained. In the second stage of the model warming, the decelerating torque per unit mass is large throughout a deep layer in the middle atmosphere, spanning several scale heights.

Dunkerton, T.↗

In Situ Observations and Sampling of Volcanic Emissions with Unmanned Aircraft: A NASA/UCR Case Study at Turrialba Volcano, Costa Rica

Burgeoning new technology in the design and development of robotic aircraft-unmanned aerial vehicles (UAVs)-presents unprecedented opportunities for the volcanology community to observe, measure, and sample eruption plumes and drifting volcanic clouds in situ. While manned aircraft can sample dilute parts of such emissions, demonstrated hazards to air breathing, and most particularly turbine, engines preclude penetration of the zones of highest ash concentrations. Such areas within plumes are often of highest interest with respect to boundary conditions of applicable mass-loading retrieval models, as well as Lagrangian, Eulerian, and hybrid transport models used by hazard responders to predict plume trajectories, particularly in the context of airborne hazards. Before the 2010 Ejyafyallajokull eruption in Iceland, ICAO zero-ash-tolerance rules were typically followed, particularly for relatively uncrowded Pacific Rim airspace, and over North and South America, where often diversion of aircraft around ash plumes and clouds was practical. The 2010 eruption in Iceland radically changed the paradigm, in that critical airspace over continental Europe and the United Kingdom were summarily shut by local civil aviation authorities and EURO CONTROL. A strong desire emerged for better real-time knowledge of ash cloud characteristics, particularly ash concentrations, and especially for validation of orbital multispectral imaging. UAV platforms appear to provide a viable adjunct, if not a primary source, of such in situ data for volcanic plumes and drifting volcanic clouds from explosive eruptions, with prompt and comprehensive application to aviation safety and to the basic science of volcanology. Current work is underway in Costa Rica at Turrialba volcano by the authors, with the goal of developing and testing new small, economical UAV platforms, with miniaturized instrument payloads, within a volcanic plume. We are underway with bi-monthly deployments of tethered SO2-sondes and are in the planning stages for the deployment of the SIERRA UAV to our site in March 2013. We will be conducting in situ observations simultaneously with ASTER orbital multispectral TIR data acquisitions, in order to compare in situ measurements with estimates of SO2 mass loading and dispersion derived from ASTER data. Though small UAVs are now being considered for use in active volcanic areas for in situ sampling of emissions (e.g., efforts by our group, and by our colleagues at the INGV in Italy and the Applied Science University in Dusseldorf, Germany, and others in the United Kingdom and Iceland), and also for remote sensing, much more needs to be done in the way of instrument development, and in developing small UAVs for both low altitude (tropospheric) and high altitude (stratospheric) applications. In particular, the development of all weather and day/night operational flight capabilities in close proximity to hazardous topography is crucial to a truly responsive volcano in situ measurement system. Finally, it is imperative that national civil aviation authorities recognize the unique benefits of such platforms. It is important that authorities understand that severely restricting or not deploying such tools in airspace over restless volcanoes or within eruption plumes, ostensibly because of the perceived (small) risk that such unmanned aircraft pose to manned air operations, itself poses a bigger transcendental risk to proximal populations and particularly to the aviation community, itself.

Volcanic Ash Advisory Centers (VAACs)↗

Computational analysis of Variable Thrust Engine (VTE) performance

The Variable Thrust Engine (VTE) of the Orbital Maneuvering Vehicle (OMV) uses a hypergolic propellant combination of Monomethyl Hydrazine (MMH) and Nitrogen Tetroxide (NTO) as fuel and oxidizer, respectively. The performance of the VTE depends on a number of complex interacting phenomena such as atomization, spray dynamics, vaporization, turbulent mixing, convective/radiative heat transfer, and hypergolic combustion. This study involved the development of a comprehensive numerical methodology to facilitate detailed analysis of the VTE. An existing Computational Fluid Dynamics (CFD) code was extensively modified to include the following models: a two-liquid, two-phase Eulerian-Lagrangian spray model; a chemical equilibrium model; and a discrete ordinate radiation heat transfer model. The modified code was used to conduct a series of simulations to assess the effects of various physical phenomena and boundary conditions on the VTE performance. The details of the models and the results of the simulations are presented.

Giridharan, M. G.↗

Modeling Self-Pressurization and Spray Bar Pressure Control of a Cryogenic Storage Tank in Normal Gravity

This paper presents Computational Fluid Dynamics (CFD) models for simulating self-pressurization and spray bar cooling processes in a large-scale liquid hydrogen storage tank under normal gravity. The self-pressurization model utilizes the kinetics-based Schrage equation with the Volume-Of-Fluid (VOF) model to account for the evaporative and condensing interfacial mass fluxes. It uses a laminar approach to model natural convection and compares the pressures and temperatures predicted by the CFD model with experimental data from the Multipurpose Hydrogen Test Bed (MHTB) self-pressurization experiment. Additionally, the predicted interfacial mass flux is presented. A CFD model for simulating pressure control using a spray bar is also presented. An Eulerian-Lagrangian approach models the interactions between the discrete droplets and the continuous ullage phase. The spray model is coupled with the VOF model by tracking particles in the ullage, removing particles from the ullage when they reach the interface, and then adding their contributions to the liquid. The T-sat model is used to calculate the droplet-ullage heat and mass transfer. In this model, droplets warm up to the saturation temperature corresponding to the ullage vapor pressure thereafter evaporating while remaining at the saturation temperature. The tank pressure, vapor, and liquid temperature evolutions are validated against data from the MHTB spray bar mixing experiment.

Self-Pressurization↗