SEARCH · Engineering Papers

Results for “Equations of fluid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1992

An analysis of the flow field in the region of the ASRM field joints

The flow field in the region of a solid rocket motor field joint is very important since fluid dynamic and mechanical propellant stresses can couple to cause a motor failure at a joint. Presented here is an examination of the flow field in the region of the Advanced Solid Rocket Motor (ASRM) field joints. The analyses were performed as a first step in assessing the design of the ASRM forward and aft field joints in order to assure the proper operation of the motor prior to further development of test firing. The analyses presented here were performed by employing a two-dimensional axisymmetric assumption. Fluent/BFC, a three dimensional full Navier-Stokes flow field code, was used to make the numerical calculations. This code utilizes a staggered grid formulation along with the SIMPLER numerical algorithm. Wall functions are used to determine the character of the laminar sublayer, and a standard kappa-epsilon turbulence model is used to close the fluid dynamic equations. The analyses performed to this date verify that the ASRM field joint design operates properly. The fluid dynamic stresses at the field joints are small due to the inherent design of the field joints. A problem observed in some other solid rocket motors is that large fluid dynamic stresses are generated at the motor joint on the downstream propellant grain due to forward facing step geometries. The design of the ASRM field joints are such that this is not a problem as shown by the analyses. Also, the analyses of the inhibitor stub left protruding into the port flow from normal propellant burn back show that more information is necessary to complete these analyses. These analyses were performed as parametric analyses in relation to the height of the inhibitor stub left protruding into the motor port. A better estimate of the amount of the inhibitor stub remaining at later burn times must be determined since the height which the inhibitor stub protrudes into the port flow drastically affects the fluid dynamics induced stresses on the propellant grain at the field joints.

Dill, Richard A.↗

NASA NTRS1993

Pseudo-compressibility methods for the incompressible flow equations

Preconditioning methods to accelerate convergence to a steady state for the incompressible fluid dynamics equations are considered. The analysis relies on the inviscid equations. The preconditioning consists of a matrix multiplying the time derivatives. Thus the steady state of the preconditioned system is the same as the steady state of the original system. The method is compared to other types of pseudo-compressibility. For finite difference methods preconditioning can change and improve the steady state solutions. An application to viscous flow around a cascade with a non-periodic mesh is presented.

Turkel, Eli↗

NASA NTRS1993

Preconditioning and the limit to the incompressible flow equations

The use of preconditioning methods to accelerate the convergence to a steady state for both the incompressible and compressible fluid dynamic equations are considered. The relation between them for both the continuous problem and the finite difference approximation is also considered. The analysis relies on the inviscid equations. The preconditioning consists of a matrix multiplying the time derivatives. Hence, the steady state of the preconditioned system is the same as the steady state of the original system. For finite difference methods the preconditioning can change and improve the steady state solutions. An application to flow around an airfoil is presented.

Turkel, E.↗

NASA NTRS2008

An Initial Investigation of the Effects of Turbulence Models on the Convergence of the RK/Implicit Scheme

A three-stage Runge-Kutta (RK) scheme with multigrid and an implicit preconditioner has been shown to be an effective solver for the fluid dynamic equations. This scheme has been applied to both the compressible and essentially incompressible Reynolds-averaged Navier-Stokes (RANS) equations using the algebraic turbulence model of Baldwin and Lomax (BL). In this paper we focus on the convergence of the RK/implicit scheme when the effects of turbulence are represented by either the Spalart-Allmaras model or the Wilcox k-! model, which are frequently used models in practical fluid dynamic applications. Convergence behavior of the scheme with these turbulence models and the BL model are directly compared. For this initial investigation we solve the flow equations and the partial differential equations of the turbulence models indirectly coupled. With this approach we examine the convergence behavior of each system. Both point and line symmetric Gauss-Seidel are considered for approximating the inverse of the implicit operator of the flow solver. To solve the turbulence equations we use a diagonally dominant alternating direction implicit (DDADI) scheme. Computational results are presented for three airfoil flow cases and comparisons are made with experimental data. We demonstrate that the two-dimensional RANS equations and transport-type equations for turbulence modeling can be efficiently solved with an indirectly coupled algorithm that uses the RK/implicit scheme for the flow equations.

Swanson, R. C.↗

NASA NTRS2007

Hypersonic Magneto-Fluid-Dynamic Compression in Cylindrical Inlet

Hypersonic magneto-fluid-dynamic interaction has been successfully performed as a virtual leading-edge strake and a virtual cowl of a cylindrical inlet. In a side-by-side experimental and computational study, the magnitude of the induced compression was found to be depended on configuration and electrode placement. To better understand the interacting phenomenon the present investigation is focused on a direct current discharge at the leading edge of a cylindrical inlet for which validating experimental data is available. The present computational result is obtained by solving the magneto-fluid-dynamics equations at the low magnetic Reynolds number limit and using a nonequilibrium weakly ionized gas model based on the drift-diffusion theory. The numerical simulation provides a detailed description of the intriguing physics. After validation with experimental measurements, the computed results further quantify the effectiveness of a magnet-fluid-dynamic compression for a hypersonic cylindrical inlet. At a minuscule power input to a direct current surface discharge of 8.14 watts per square centimeter of electrode area produces an additional compression of 6.7 percent for a constant cross-section cylindrical inlet.

Shang, Joseph S.↗

NASA NTRS1983

Nonlinear aerodynamic modeling of flap oscillations in transonic flow - A numerical validation

The regime of validity of a nonlinear aerodynamic force and moment formulation, based on concepts from nonlinear functional analysis and applicable to a transonic airfoil with a deflecting flap, is investigated. A time-dependent finite difference technique is used to evaluate the aerodynamic data of the formulation in terms of specified, characteristic motions. Flap-motion histories are generated from the flap inertial equations of motion, with aerodynamic reactions specified by the moment formulation. The motion histories depicting the cases of decaying and growing flap oscillations are compared with histories generated through simultaneous, coupled solution of the fluid-dynamic equations and flap inertial equations of motion. The range of applicability of the formulation is discussed.

Chyu, W. J.↗

NASA NTRS2003

Aeroelastic System Development Using Proper Orthogonal Decomposition and Volterra Theory

This research combines Volterra theory and proper orthogonal decomposition (POD) into a hybrid methodology for reduced-order modeling of aeroelastic systems. The out-come of the method is a set of linear ordinary differential equations (ODEs) describing the modal amplitudes associated with both the structural modes and the POD basis functions for the uid. For this research, the structural modes are sine waves of varying frequency, and the Volterra-POD approach is applied to the fluid dynamics equations. The structural modes are treated as forcing terms which are impulsed as part of the uid model realization. Using this approach, structural and uid operators are coupled into a single aeroelastic operator. This coupling converts a free boundary uid problem into an initial value problem, while preserving the parameter (or parameters) of interest for sensitivity analysis. The approach is applied to an elastic panel in supersonic cross ow. The hybrid Volterra-POD approach provides a low-order uid model in state-space form. The linear uid model is tightly coupled with a nonlinear panel model using an implicit integration scheme. The resulting aeroelastic model provides correct limit-cycle oscillation prediction over a wide range of panel dynamic pressure values. Time integration of the reduced-order aeroelastic model is four orders of magnitude faster than the high-order solution procedure developed for this research using traditional uid and structural solvers.

Lucia, David J.↗

NASA NTRS1983

Role of thermal conduction in the acceleration of the solar wind

The thermal and suprathermal processes involving solar wind electrons are discussed from a theoretical point of view. A model for the electron distribution function, f(e), based on the solutions of the Boltzmann equation in Krook's approximation is outlined: the angular and energy dependences of for various distances from the Sun between the coronal base and the Earth are presented with the express purpose of obtaining the radial profile of the heat flux generated by the suprathermals. The basic fluid-dynamical equations for the solar wind plasma as a whole along any given magnetic field line are solved. Results are in good agreement with observations. The predicted density and temperature profiles for positive ions exhibit the characteristics of recent measurements, both in the corona (above the coronal holes) and between 0.3 and 1 A.U. (the Helios region). It is concluded that the suprathermal electrons play an important role in the formation and the dynamics of the solar wind.

Olbert, S.↗

NASA NTRS1990

Thermal interaction between an impinging hot jet and a conducting solid surface

Powered-lift aircraft may produce severe high-temperature environments which are potentially damaging to a landing surface or the aircraft. The interaction betweean the high temperature flow field and a nonadiabatic landing surface is analyzed with a coupled computational fluid dynamics/solid thermal conduction computer code, HOTJET. The HOTJET code couples time-accurate, implicit, factored solution schemes for the governing fluid dynamics equations (Reynolds-averaged Navier-Stokes equations) to the unsteady thermal conduction equation, which governs heat flux within a solid. HOTJET is validated against exact solutions to the thermal conduction and Navier-Stokes equations. First-of-a-kind results are included which show the impact of surface material properties on the fluid physics and the coupled fluid/material thermal fields.

Abeloff, P. A.↗

NASA NTRS1993

CFD Analysis of Spray Combustion and Radiation in OMV Thrust Chamber

The Variable Thrust Engine (VTE), developed by TRW, for the Orbit Maneuvering Vehicle (OMV) uses a hypergolic propellant combination of Monomethyl Hydrazine (MMH) and Nitrogen Tetroxide (NTO) as fuel and oxidizer, respectively. The propellants are pressure fed into the combustion chamber through a single pintle injection element. The performance of this engine is dependent on the pintle geometry and a number of complex physical phenomena and their mutual interactions. The most important among these are (1) atomization of the liquid jets into fine droplets; (2) the motion of these droplets in the gas field; (3) vaporization of the droplets (4) turbulent mixing of the fuel and oxidizer; and (5) hypergolic reaction between MMH and NTO. Each of the above phenomena by itself poses a considerable challenge to the technical community. In a reactive flow field of the kind occurring inside the VTE, the mutual interactions between these physical processes tend to further complicate the analysis. The objective of this work is to develop a comprehensive mathematical modeling methodology to analyze the flow field within the VTE. Using this model, the effect of flow parameters on various physical processes such as atomization, spray dynamics, combustion, and radiation is studied. This information can then be used to optimize design parameters and thus improve the performance of the engine. The REFLEQS CFD Code is used for solving the fluid dynamic equations. The spray dynamics is modeled using the Eulerian-Lagrangian approach. The discrete ordinate method with 12 ordinate directions is used to predict the radiative heat transfer in the OMV combustion chamber, nozzle, and the heat shield. The hypergolic reaction between MMH and NTO is predicted using an equilibrium chemistry model with 13 species. The results indicate that mixing and combustion is very sensitive to the droplet size. Smaller droplets evaporate faster than bigger droplets, leading to a well mixed zone in the combustion chamber. The radiative heat flux at combustion chamber and nozzle walls are an order of negligible less than the conductive heat flux. Simulations performed with the heat shield show that a negligible amount of fluid is entrained into the heat shield region. However, the heat shield is shown to be effective in protecting the OMV structure surrounding the engine from the radiated heat.

Giridharan, M. G.↗

DOE OSTI2025

Spatiotemporal predictions of toxic urban plumes using deep learning

Industrial accidents, chemical spills, and structural fires can release large amounts of harmful materials that disperse into urban atmospheres and impact populated areas. Computer models are typically used to predict the transport of toxic plumes by solving fluid dynamical equations. However, these models can be computationally expensive due to the need for many grid cells to simulate turbulent flow and resolve individual buildings and streets. In emergency response situations, alternative methods are needed that can run quickly and adequately capture important spatiotemporal features. Here, we present a novel deep learning model called ST-GasNet inspired by the mathematical equations that govern the behavior of plumes as they disperse through the atmosphere. ST-GasNet learns the spatiotemporal dependencies from a limited set of temporal sequences of ground-level toxic urban plumes generated by a high-resolution large eddy simulation model. On independent sequences, ST-GasNet accurately predicts the late-time spatiotemporal evolution, given the early-time behavior as an input, even when a building splits a large plume into smaller plumes. By incorporating large-scale wind boundary condition information, ST-GasNet achieves a prediction accuracy of at least 90% on test data for the entire prediction period.

Civil and Environmental Engineering↗

NASA NTRS1972

Design of the UCLA general circulation model

An edited version is reported of notes distributed at the Summer Workshop on the UCLA General Circulation Model in June 1971. It presents the computational schemes of the UCLA model, along with the mathematical and physical principles on which these schemes are based. Included are the finite difference schemes for the governing fluid-dynamical equations, designed to maintain the important integral constraints and dispersion characteristics of the motion. Also given are the principles of parameterization of cumulus convection by an ensemble of identical clouds. A model of the ground hydrology, involving the liquid, ice and snow states of water, is included. A short summary is given of the scheme for computing solar and infrared radiation transfers through clear and cloudy air.

Arakawa, A.↗

NASA NTRS1973

A local eddy viscosity model for turbulent shear flow

In the model described, the eddy viscosity is assumed to be a fluid property dependent on the state of the fluid locally, namely the local density, turbulent kinetic energy, turbulence scale, and Mach number. An empirical law was found which related eddy viscosity to these properties satisfactorily for free jets. This law is used without modification for a set of test cases in free shear layers, free-jet decay, coaxial mixing, and wakes. The scale of turbulence is taken as a constant at any axial location equal to the width of the shear layer. By utilizing the boundary-layer order-of-magnitude analysis, a coupled set of fluid dynamic equations is formulated, which of necessity includes the equation for the production of turbulent kinetic energy.

Ortwerth, P. J.↗

NASA NTRS1975

Aerothermodynamic environment for Jovian entry conditions

Solutions are presented for the aerothermal heating environments about blunt probes entering the atmosphere of Jupiter. The analysis employs a novel prediction procedure in which finite differences versions of the thin layer fluid dynamic equations are solved simultaneously with, and coupled to, a fully detailed radiation flux model. Predictions are presented and compared with those of earlier investigators. Radiative blowing corrections are presented for on- and off-stagnation point conditions. The use of a blowing correlation based on the retained mass was found to be useful for off-stagnation point conditions.

Nicolet, W. E.↗

NASA NTRS1976

Steady supersonic flowfields with embedded subsonic regions

Supersonic flow past a blunt body is considered, where the flow contains an embedded subsonic region which lies between the shock wave and the body surface and is bounded by sonic lines from the body to the shock. A numerical approach is taken, which uses a basic finite difference scheme that solves the unsteady fluid dynamic equations in integral form. The unsteady equations are everywhere hyperbolic in time so no distinction need be made between subsonic and supersonic regions. Solutions to the mixed elliptic and hyperbolic steady flow equations are approached asymptotically in time. The method is illustrated for two-dimensional flows.

Maccormack, R. W.↗

NASA NTRS1978

Filtering of non-linear instabilities

For Courant numbers larger than one and cell Reynolds numbers larger than two, oscillations and in some cases instabilities are typically found with implicit numerical solutions of the fluid dynamics equations. This behavior has sometimes been associated with the loss of diagonal dominance of the coefficient matrix. It is shown that these problems can be related to the choice of the spatial differences, with the resulting instability related to aliasing or nonlinear interaction. Appropriate filtering can reduce the intensity of these oscillations and possibly eliminate the instability. These filtering procedures are equivalent to a weighted average of conservation and nonconservation differencing. The entire spectrum of filtered equations retains a three point character as well as second order spatial accuracy. Burgers equation was considered as a model.

Khosla, P. K.↗

NASA NTRS1978

Future Computer Requirements for Computational Aerodynamics

Recent advances in computational aerodynamics are discussed as well as motivations for and potential benefits of a National Aerodynamic Simulation Facility having the capability to solve fluid dynamic equations at speeds two to three orders of magnitude faster than presently possible with general computers. Two contracted efforts to define processor architectures for such a facility are summarized.

Source record↗

NASA NTRS1979

Filtering of non-linear instabilities

For Courant numbers larger than one and cell Reynolds numbers larger than two, oscillations and in some cases instabilities are typically found with implicit numerical solutions of the fluid dynamics equations. This behavior has sometimes been associated with the loss of diagonal dominance of the coefficient matrix. It is shown here that these problems can in fact be related to the choice of the spatial differences, with the resulting instability related to aliasing or nonlinear interaction. Appropriate 'filtering' can reduce the intensity of these oscillations and in some cases possibly eliminate the instability. These filtering procedures are equivalent to a weighted average of conservation and non-conservation differencing. The entire spectrum of filtered equations retains a three-point character as well as second-order spatial accuracy. Burgers equation has been considered as a model. Several filters are examined in detail, and smooth solutions have been obtained for extremely large cell Reynolds numbers.

Khosla, P. K.↗